Why can't I save the changes I've made to a .vit?

I've created and saved a .vit file that's called from a another .vi.
Then, i went back and tweaked the .vit file (and saved it as the original .vit filename), this ran fine by itself.
But, when i call this file from the 'main' .vi, those changes didn't show up, it was still the original file.
I'm very sure i saved the changes under the proper file name and extension, what am i missing?

In your "main" vi, how exactly are you caling the vit? Are sure you are calling the vit, or a vi instance created from the vit? Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Similar Messages

  • Why can't I save any changes I make to the converrted document?

    Why can't I save any changes I make to the converrted document?

    Hi,
    Have you mark the OCR Feature checked while converting the PDF to DOC.
    Please try that and let me know if that work,
    ~Pranav

  • Forms6i question - Do you want to save the changes you have made !!

    Hi,
    I'm developing a custom master-detail form for 11i e-Business Suite. The requirement is to programmatically default values for some of the base table items when entering the master record.. Both the master and the detail blocks are base table blocks and defined the relation between these 2 as well..
    So i have coded my defaulting logic in the "when-new-record-instance " trigger only when the "(:system.record_status IN ('NEW','INSERT' ) AND :system.mode <> 'ENTER-QUERY')"..
    This is working but the problem is even when i do not change any values in the master block and i try to exit out of the form, getting a message "Do you want to save the changes you have made ".. I want to get that message only when some thing else is changed/entered in the master block or when any new detail records has been entered for that master block.
    Thanks in advance
    Shree

    Shree,
    It sounds like you have a Post-Query (PQ) trigger that is populating items in your Form. This is the typical reason why you would see this message when you close your form and no User changes have been made. The best solution would be to move your non-base table items from your data blocks to a control block so the PQ trigger won't mark the block or record as "Changed".
    Hope this helps.
    Craig...

  • Suppress the message do you want to save the changes you have made

    hi all
    i have written a rollback
    it clears my record
    but gives me the message
    do you want to save the changes you have made
    i have written
    :system.message_level :=25;
    rollback;
    :system.message_level=0;
    but still it is giveing me the message
    can you please tell me how to suppress this message
    please help me
    thanks
    mandar

    try in reverse

  • How to avoid the message "Do you want to save the changes you have made?"

    i have 3 forms
    master block
    detail1 block of master
    detail2 block of detail1
    when i go out of detail1 and detail2 blocks after doing some modifications it asks me "Do you want to save the changes you have made"?
    i want to avoid this message as well as my changes should be posted in the database. what is the solution for this big pblm?

    hi
    may be you are trying to modify the database item or reassigning the database item value which is not actually needed.
    try to comment the reassigning database values
    and give clear_form(do_commit);
    most probably u will not get the message again
    Regards
    Rajdeep .A

  • Gettins "Do you want to save the changes you have made" promt without any

    Hi all,
    Problem : I have a master detail relation between two blocks which are on different window ( say block 1 on window 1 is master and block 2 on window 2 is detail) ,
    when i open my window 2 and close it without any changes, then when i try to do any change in window 1 i get this popup message "Do you want to save the changes you have made".
    I have various non database items as well which are used to hold intemediate values like sum of a column and all.
    for the close button on window 2 logic :
         go_block('BLOCK1');
         hide_window('WINNDOW1');
    I dont want to change the message level. as if there are really changes made then we need this message.
    In another thread i saw this might be due to copy "value from property" created by master detail relation on the joined columns.
    Please suggest any solutions.
    Thanks in advance.

    HI I found the solution to this Problem:
    when we queried the data block then few items values were assigned . this changes the block_status to CHANGED as well as the form_status variable to CHANGED.
    so in EXIT logic of that window i cleared each block explicitly . this discards all the changes made to those blocks ( This logic was implemented for CANCEL button on my screen as so we need not save the data) while the SAVE logic already has the COMMIT so will not set the popup for that.
    Not a beautiful logic...... but works ...... :)

  • Why can't i save the same bookmarks in different locations?

    Why can't I save a bookmark for a particular site in multiple locations? If I already have it saved, for instance, in the bookmarks menu, and I then try to save an additional copy into the bookmarks folder, the copy in the bookmarks menu will disappear. This is incredibly frustrating. Thanks.

    Using the "star" at the right end of the Location bar, you can only save to one location.
    Using the Bookmark Sidebar (CTRL+B opens and closes the Bookmarks Sidebar), you can drag the icon at the left end of the Location Bar to other locations, one at a time, into a folder (will be placed at the bottom of the items already in the folder) or into any position, including a position within a folder. The image below demonstrates; the image is old, but the method still works. This is the only method that I use for Bookmarking, as I place some Bookmarks in multiple folders and I keep the Bookmarks Sidebar open most of the time for easier access.
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
    Not related to your question, but...
    You need to update some plug-ins:
    *Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
    *Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
    *Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
    *Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

  • Why can't FC save the folder locations set for render files?

    I wrongly assumed that when you go to system settings to select the scratch disks (root folder where all the audio and video render folders and files go, capture files, etc.) that Final Cut would save the folder locations within the FC project you are working in. Makes total sense, but for reasons I don't understand, FC does NOT save these folder locations and the result is that I have render files scattered all over the place on my hard drive and it is quite a mess! Fortunately, the project file remembers where it put the render files, so as long as you don't remove or rename any project folders, everything shows up rendered on the time line as it should. The problem is, if I'm working on several projects at once, I have to reset the scratch disks every time I reopen a project, otherwise the program will save it to the last scratch location selected and put all of the render files in another project's folder. I often forget to reset the scratch disks when I'm busy and now I have render files mixed up in various project folders.
    Why can't you just set the scratch disks one time when you first set up the project and have the project always remember that location, instead of always having to reset them every time you reopen a project. I love Final Cut, but this is a product defect that should be addressed and corrected. If the project file can remember where it is putting all the render files, it should also be capable of remembering the scratch disk locations you originally selected when you first set up the project or better yet, save it to the project's root folder by default. Am I missing something here?

    As MtD describes, FCP sets file locations for ALL projects at the system level.  It may help to organize things this way so your files don't end up scattered across multiple locations.
    Save the project files to your User folder on the boot drive.
    For all the other files FCP creates, set them on a non-boot drive similar to this:
    Media Drive
    ----->FCP Documents
    ---------->Autosave Vault
    ---------------->Acme Widgets Demo (sample project name)
    ---------------->Grass Valley Music Video (sample project name)
    ---------------->Jen's Wedding (sample project name)
    ---------->Audio Render Files
    ---------------->Acme Widgets Demo (sample project name)
    ---------------->Grass Valley Music Video (sample project name)
    ---------------->Jen's Wedding (sample project name)
    ---------->Capture Scratch
    ---------------->Acme Widgets Demo (sample project name)
    ---------------->Grass Valley Music Video (sample project name)
    ---------------->Jen's Wedding (sample project name)
    ----------->Render Files
    ---------------->Acme Widgets Demo (sample project name)
    ---------------->Grass Valley Music Video (sample project name)
    ---------------->Jen's Wedding (sample project name)
    ----------->Waveform Cache
    Of course, you can choose to keep renders or the Autosave Vault folder on other drives ... just keep them off your boot drive.  It may not be the way you're use to working, but it's worked well for me the past 14 years.  When you finish with a project and ready to delete the associate files, just go to your media drive and delete folders bearing the project's name.
    -DH

  • Why can't I save Joomla changes in Firefox 19.0?

    I upgraded Firefox 19 and since then can't save any changes in Joomla 2.5.8 ... I'm having no problem in Safari and can't trace the problem to Firefox. I can't find anyone else having this problem in any search so I am truly perplexed.

    Can you update to either Joomla 2.5.9 or 3.0.3?

  • Why can't I see the changes in my image when I move the sliders in LR's Develop Module

    When I use the quick develop tools in the LR 5.3 Library module, I see the changes in the selected image. When I switch to the Develop Module, when I move the sliders for the different tools, nothing happens to my image. When I go back to the Library module, I see the changes, but not in the Develop Module. Why is this happening? I have a PC running Windows 7. I have 30 gigs of space on my C drive. I recently updated my LR to 5.3 and subscribed to CC. I uninstalled the LR program and reinstalled it from the cloud. Same problem.

    Hello lakota85usa, the [http://kb.mozillazine.org/Profile_folder_-_Firefox#Mac profile folder is hidden Mac OS X 10.7 and above], not in your version(10.6.8), see if the "Showing hidden files and folders on Mac OS X" in the next link is helpful: http://kb.mozillazine.org/Show_hidden_files_and_folders#Mac_OS_X
    thank you

  • Why can't i save the image that i have corrected on the texturizer filter screen.

    as soon as i click ok on the corrected screen, it reveals the underlying original uncorrected image. i don't see any options to save the image.

    In version 10 hold down Alt+Ctrl+Shift while starting PSE. Answer Yes to the prompt box. This is what it will look like (except yours will say 10 in the Title).
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children
    If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

  • How do I save the changes I have made to the settings? Also, how do I get the "Would you like to give Firefox feedback?" popup to go away?

    I have gone into my Tools and then Options and have made changes there (like for Downloads I clicked "Close when all downloads are finished"), but the changes will not save for when I close and reopen the browser; my changes to the settings are not being saved at all. How can I get the changes to stay? Also, I keep getting this popup from Firefox asking, "Will you help improve Mozilla Firefox by sending information about performance, hardware, usage, and customizations to Mozilla?" and I keep pressing the "No" button but it appears every time I open the browser. Even when I press "Yes," it reappears. Is there a way to permanently say "NO"? I would appreciate any help!

    hello vnsonwu, this sounds like there might be a problem with the file in your profile folder that stores the settings (maybe it is set to read-only or corrupted in another form) - please go through the troubleshooting steps described here: [[How to fix preferences that won't save]]

  • Why can't I save the form I created in Acrobat XI as a Reader Extended PDF?

    I created and saved the document just like I have always done, with form and signature fields.  When I click file>save as>reader extended, it let's me go through and name a new verison of the file, but then says "This document cannot be saved as reader enable."  It gives no reason.  If I can't save it as reader enabled, as I've done in the past with every single form, I'd like to know WHY so that I can fix it. 

    I have run into this issue at times too. If you have the original document that you used to create the form saved in a folder in Windows Explorer, try closing Windows Explorer before saving the document with reader extended properties enabled. Sometimes this works, sometimes it doesnt. . .

  • What is this symbol?  And why can't I save the pics sent to me?

    Hi.  I just received 15 pictures from my dad, but all the normal way of saving them "add to iphoto" "save" "save as" are disabled - even just dragging them to the desktop.  i try to do any of them and the save button is greyed.
    this symbol is in the inbox message.
    Any idea what that is?
    Thanks so much,
    Danny

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and  Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Why can't I save the sender of a text to my contacts?

    Whenever I get a text from someone who is not in my contacts, I can't save their phone number to my contacts. I think there used to be a button at the top of the conversaton that gave me the choice to save, but it's no longer there. Also, the manual says that all I have to do is tap the phone number, but that doesn't work. Anyone know what's going on and how do I save these people to my contacts without having to cut and paste? Thanks!

    Welcome to iMovie Discussions.
    See my 2nd reply to 'getzcreative', here.

Maybe you are looking for