Why can't the Web console in FF9.01 not see extensions I've added to the Array class (object)?
I've added a number of new methods to the Array object in Javascript. My scripts see them fine, but the Web console reports them as 'undefined'. Apparently the console cannot see my changes. Why is that?
Not the same. It should be like the orange indicator for an imported clip in the camera import window. It's really quite sophisticated in iMovie. When you switch projects the orange line changes to reflect what's in the open project so a clip might have the orange indicator when one project is open in the timeline, and not when another project is open. It's a really useful tool, because it even shows what parts of a clip have been used in the open project.
Similar Messages
-
I just downloaded Firefox 6.0. The web page asked if I wanted to upgrade. What is the most recent version of Firefox and why can't I get it denoted in the propperties link? Also why is it not compatible with AVG Tool Bar?
Firefox 6.0 is the current version.
Get what denoted in what properties link.
You can get the version number in Help -> About Firefox,
and in '''about:support''' typed into the Location bar, and you can use JavaScript to list the user agent -- javascript:navigator.userAgent
I'm not aware of any version of Firefox from Fx 2 on up to Fx 6 where "AVG Safe" is not a problem. Crashes aren't the only failures caused.
* http://kb.mozillazine.org/Problematic_extensions
* https://addons.mozilla.org/en-US/firefox/blocked/
* https://addons.mozilla.org/en-US/firefox/blocked/i6
* https://bugzilla.mozilla.org/show_bug.cgi?id=527135 -
How do I get the Web Console on top, in FireFox 21 Mac?
In Firefox 21, the Web Developer Web Console seems to be fixed to the bottom with no option to change it. In previous version of FF, there was an option to put it on the top of the window. The bottom is a bad place for the Web Console, especially for Mac users. For one, the status line is right above the command prompt when something is loading or I'm moused-over a link, so I can't type in the prompt. Also annoying as a Mac user, when I bring the mouse too close to the bottom of the window, to type in the console prompt, my dock pops up. Whenever I want to use the console prompt, I have to bring the window up an inch to keep my Mac OS dock from popping up.
I prefer relative inside positioning to a separate window getting in the way. You must assume that I already know what the Web Developer console is to basic extent; it's not a tip to point out an elaborate and separate option that is already known to all who are familiar with the console. Perhaps I didn't explain my problem correctly. I think I meant Web Developer Web Console "above" not "top", but yes "top" to CSS definition of top, including whatever it is called in GUI terms "above", but not like window above or top in layers.
-
Hi there I have been trying to help a friend work out why she hasn't been able to access itunes on her home computer for 3 months as it comes up with the following error "We could not complete your iTunes Store request. The iTunes Store is temporarily unavailable. Please try again later"
I have cleared her crache and dissabled firewalls still no luck. Then I tried logging in with my id and to our surprise it worked. So any assistance would be great. Please find the report below maybe you can help!
Microsoft Windows XP Professional Service Pack 3 (Build 2600)
Hewlett-Packard hp workstation xw4200
iTunes 11.1.1.11
QuickTime 7.7.4
FairPlay 2.5.16
Apple Application Support 2.3.6
iPod Updater Library 11.1f5
VoiceOver Kit 1.4.2 (222093/222742)
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 7.0.0.117
Apple Mobile Device Driver 1.59.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 0012B4A009D5EBF0
Current user is an administrator.
The current local date and time is 2013-10-08 22:38:51.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
NVIDIA Quadro FX 540
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 11.1.1.11 is currently running.
iTunesHelper 11.1.1.11 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {CF4127E8-FA53-4985-9CB6-F74A04C92757}
Description: Broadcom NetXtreme Gigabit Ethernet - Packet Scheduler Miniport
IP Address: 10.0.0.1
Subnet Mask: 255.255.255.0
Default Gateway: 10.0.0.138
DHCP Enabled: Yes
DHCP Server: 10.0.0.138
Lease Obtained: Tue Oct 08 22:19:05 2013
Lease Expires: Tue Oct 15 22:19:05 2013
DNS Servers: 10.0.0.138
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
Firewall Information
Windows Firewall is off.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2013-10-08 22:21:42.Same problem. I can see the itunes store so not a problem with windows firewall. The account is active on my iphone so i know i am not locked out. I can connect the PC to my iphone so i know itunes is working ok. It is just logging into itunes on this pc which doesn't work. Only thing I can think of is that the email address I use for my apple id has been offline for a while and is working again now, I'm wondering whether this has been the case for others who are having this issue?
-
Steps to extend the schema if I have no access to the web console
Hello,
I am usin DS 6.2. The web console is not applicable in my case. So I must extend the schema manually.
I want to add an attribute type and an objectclass. I do have a test server and I did
ldapsearch -L -b "cn=schema" objectclass='*'
and then took what I need:
dn: cn=schema
changetype: add
attributeTypes: ( 1.3.6.1.4.1.42.2.27.9.1.333 NAME 'orclnetdescstring' SYNTAX 1.3.6.1.4.1.1466.115.121.1.40 X-ORIGIN 'user defined' )
objectClasses: ( orclservice-oid NAME 'orclservice' SUP top STRUCTURAL MUST cn MAY orclnetdescstring X-ORIGIN 'user defined' )
When I do:
ldapadd -c -h hostname -p 389 -D "cn=Directory manager" -w password -f myldif
adding new entry cn=schema
ldap_add: Object class violation
I tried to add these lines
attributeTypes: ( 1.3.6.1.4.1.42.2.27.9.1.333 NAME 'orclnetdescstring' SYNTAX 1.3.6.1.4.1.1466.115.121.1.40 X-ORIGIN 'user defined' )
objectClasses: ( orclservice-oid NAME 'orclservice' SUP top STRUCTURAL MUST cn MAY orclnetdescstring X-ORIGIN 'user defined' )
to 99users.ldif and restarted the server. No progress.
any idea please?You can either use 2 "changetype:modify" operations (not changetype:add since you're trying to modify an existing entry), or you can stop you DS, then edit the 99user.ldif by hand and start it again .
-
Open the Web Console when a pop-up opens
Suppose I am working with a webpage and I have the console open.
Then, I click in an element, and the javascript code that handles the event decides to open a new window.
That window does not have the console open, so I miss some details of the http traffic, etc.
What I am doing now is to hit Ctrl+Shift+K as fast as I can, or use Fiddler.
But there must be a setting somewhere where I can say "Always open the console when a new window is open", Right?
I googled a bit, but I couldn't not find an answer.Hi bcartolo,
Not a problem. You can open the Web Console by first going to Tools > Web Developer Tools > Web Console
Then try [https://addons.mozilla.org/en-US/firefox/addon/firegestures/ Firegestures] to customize this. -
Yes, new web-developer all-in-one tools are total mess.
I didn't find the answer to this question either https://support.mozilla.org/en-US/questions/955612 but downgrade to Firefox 19.
But nor in Nightly, nor in Aurora, nor in Firefox Beta, nor in Firefox 20.0 I can use simultaneously web-console (where I test some style changing javascript code) and element inspector (where I instantly observe a reaction to my code). The only option I see is to switch every three seconds between them. How can I fix this except downgrading?You can consider to use the DOM Inspector extension instead of the built-in Inspector.
*DOM Inspector: https://addons.mozilla.org/firefox/addon/dom-inspector-6622/ -
I just updated to 4.0.1 on my mac and now it says "Firefox is currently in offline mode and can't browse the web". It is not my internet since I am using Safari just fine. Any suggestions? I sure wish I wouldn't have updated!
Make sure that Work Offline is unchecked: File > [] Work Offline
-
I have an icloud account which I can access via the web but when I go to systems preferences and click on the icloud it sends me to the mobileme closed site?? How do I get it to go to my icloud log in?
You're saying that when you click on the iCloud preference pane button it sends you to the defunct MMe
rather than giving you this?
Is your profile up to date, i.e. are your running 10.7.5? Make sure you click on the iCloud button and not the MMe button.
OT -
why can't i view my photos, whenever i try to look at my photos the app crashes and i've tried everything
Hello Andra,
It sounds like you are not able to access the iTunes and App Stores on your iPod touch. I found an article with steps you can take to address issues like this. The steps in this article address both the iTunes and App Stores:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Thank you for using Apple Support Communities.
Best,
Sheila M. -
Why can I print from my iPhone and not my iPad? I have been able to do it in the past. I have tried a hard reset but it still cannot find the printer.
In addition to rebooting the router and the iPad, I would reset the printer as well. Unplug the printer from power and do the same with the router. Leave the router unplugged for about 30 seconds. Plug the router in first and let it totally start up, plug the printer in again, and then reboot/reset the iPad.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
If that doesn't work, you can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. Your WiFi passwords, location services, device preferences all have to be re-entered. You will not lose any data or media whatsoever. -
How can I restore the web address page and not be directed to a search engine?
My address bar has disappeared. Whenever I want a new address and type it in I am diverted to a search engine which locates the address I have typed in. I cannot get to the preferences bar to make corrections.
I use Windows 8. All was fine until a few weeks ago when something changed my Firefox system.Make sure that toolbars like the "Navigation Toolbar" and the "Bookmarks Toolbar" are visible.
*Firefox menu button > Options
*View > Toolbars (press F10 to display the menu bar)
*Right-click empty toolbar area
Use Toolbar Layout (Customize) to open the Customize window and set which toolbar items to display.
*check that "Bookmarks Toolbar items" is on the Bookmarks Toolbar
*if "Bookmarks Toolbar items" is not on the Bookmarks Toolbar then drag it back from the toolbar palette into the Customize window to the Bookmarks Toolbar
*if missing items are in the toolbar palette then drag them back from the Customize window on the toolbar
*if you do not see an item on a toolbar and in the toolbar palette then click the "Restore Default Set" button to restore the default toolbar setup
*https://support.mozilla.org/kb/How+to+customize+the+toolbar
*https://support.mozilla.org/kb/Back+and+forward+or+other+toolbar+items+are+missing
You can check for problems caused by a corrupted localstore.rdf file if the above didn't help.
*http://kb.mozillazine.org/Corrupt_localstore.rdf -
I have updated my firefox and all the plugins. I can not see any chat option next to the online member on my chat list. if they send me message with chat i can not write them back but I can not start the chat.
OMG, i just figured it out, instead of spelling out the chat it shows a little square which symbolize the chat. Thanks for your help.
-
The setting ExternalProxy in the Web.Config file was not valid.
Since installing Exchange 2010 SP1 (Upgrade from RTM) I get this in the event viewer.
The setting ExternalProxy in the Web.Config file was not valid. The previous value was null and has been changed to .
Any ideas what to check?I'm also getting a number of these errors on Exchange 2010 SP1 RU1, the settings that I get notified include (the values have been changed to a number of diferent values):
ExternalProxy
BootstrapMailDeliveryDelay
MobileUpdateInformationURL
BootstrapCABForWM61HostingURL
FullServerVersion
ADCacheMaxOrgCount
ADCacheExpirationTimeout
MaxDocumentDataSize
MaxDocumentLibrarySearchResults
MaxGALSearchResults
BadItemEmailToText
BadItemIncludeEmailToText
BadItemIncludeStackTrace
MaxClientSentBadItems
MailboxSearchTimeoutNoContentIndexing
MailboxSearchTimeout
MaxMailboxSearchResults
MaxRequestsQueued
MaxWorkerThreadsPerProc
MaxCollectionsToLog
ProxyConnectionPoolConnectionLimit
ProxyHandlerShortTimeout
ProxyHandlerLongTimeout
BackOffErrorWindow
BackOffTimeOut
BackOffThreshold
ProxyVirtualDirectory
BlockLegacyMailboxes
BlockNewMailboxes
SchemaValidate
SchemaDirectory
SyncLogDirectory
SyncLogEnabled
DisableCaching
DeviceClassCacheADCleanupInterval
DeviceClassPerOrgMaxADCount
DeviceClassCachePerOrgRefreshInterval
DeviceClassCacheMaxADUploadCount
DeviceClassCacheMaxStartDelay
MaxWindowSize
MaxRetrievedItems
EventQueuePollingInterval
ADCacheRefreshInterval
MaxSizeOfMailboxLog
NumOfQueuedMailboxLogEntries
MaxNumOfFolders
Can these be resolved in a similar manner. Some additional information would be great (as sjoegarrett I can also ignore them, but would prefer if these could be eliminated). -
The ovmcore-console libraries were not found on the system!!
Hi all,
I need help to open serial console from Oracle VM Manager GUI.
I'm using the beta version 3.3 of Oracle VM Manager and the agent with Oracle VM Server 3.1 installed on a SPARC Enterprise T5240.
I created a virtual machine with the manager, but when i try to launch serial console i have the following message:
"Error 404: Page not found.
The ovmcore-console libraries were not found on the system.
Please install the correct ovmcore-console rpm suitable for your system on the Manager server.
See the Oracle VM Installation Guide for additional information."
any help ?Thank you for testing Oracle VM Manager 3.3 beta.
We are still reviewing ovmcore-console package and have not made it public yet. Meanwhile, please use the following workaround to access the VM console:
You can redirect the remote port to local using the ssh(1) command.
1) From Oracle VM Manager UI, find out the UUID of the virtual machine. For example: 0004fb0000060000e98127266687b615.
2) Log into Oracle VM server (dom0), use xm list command to get the domain id. In this example, the domain id is 2. The VNC port number will be 59xx, starting with 5900.
# xm list -l 2 |grep 59
(location 127.0.0.1:5900)
3) From your own desktop, then you can execute the command in a local shell to redirect the port to your desktop:
$ ssh -L 12345:localhost:5900 -N -f root@OVS
4) The "5900" port will be redirected to "12345" of your local desktop, so that you can run the following command to connect the guest console:
$ vncviewer local:12345
5) For Windows, you can set up an ssh tunnel by using PuTTY for example.
Maybe you are looking for
-
Hello I've been running Firefox 3.6.16 with no problems at all, and this morning decided to upgrade to Firefox 4.0, as the developer of the them I use, Foxscape, has upgraded it to work with 4.0. The installation appeared to be as normal, but when I
-
IDoc error handling using workflows
Hi, I have a requirement to generate IDocs in the Source system and process them in the target system. The IDoc message type is HRMD_ABA. And I am using standard processes to generate them and post them using PFAL and RBDAPP01 program respectively. A
-
This is a very simple one... but it is slowly driving me mad. I have some data, i want to know the maximum, but i want to go through several channels so i'm using a variable for my channel number.... Option Explicit 'Forces the explicit declaration
-
Hello, I feel like a big dummy, but i downloaded digital editions, activated my computer, but the library asks for a "pin" and won't accept my adobe password. is there a step i have missed?
-
Mouse moves automatically to left corner of HP TouchSmart 320 PC using Windows 7
My mouse jumps to top left corner of my HP TouchSmart 320 PC using Windows 7. In the middle of typing the mouse jumps to the corner of the screen. I have installed new batteries but no change.