Why Delivery is allowed with the existance of delivery Block

Dear Gurus,
Thing is that I have set a delivery block for a Sales order. After creation of sales order if i go to VL01N and enter the same  Sales order number with proper dates and Shipping point system allows me to go in the delivery creation screen upto picking tab also. which I dont want to because yet I have not removed the delivery block from sales order.
In the criteria for delivery block (from Log Execution - shipping - Deliveries - Define reason for Del Block) also I have checked for Order, Picking and goods Issue. therefore system is not allowing me to pick the goods.
I am not getting check box for delivery in the delivery block criteria.
I want the system to stop me from creation of delivery as I enter the Sales order in VL01N screen with usual error messages that the sales order is block for delivery. I know the system like this only but I know why the delivery overview screen is allowed in this case.
Is this a new develpoment in ECC 6.0  because usually system behave itself  the way I require here.
If any configuration is required please suggest me the solution.  thanks in advance.
regards,
Sanju.

Hi,
At header level: That is to block the entire Sales Order from creating the delivery use this below procedure:
Go to VOV8 tcode and get in to your Sales document type and in the resultant screen go to SHipping Section. Under Shipping Section go to the "Delivery Block" field and make the block. 
At Item level: That is to block the Sales Order at item wise from creating the delivery use this below procedure:
GO to VOV6 tcode and get in to your schedule line category and in the schedule line category go to the "Delivery Block" field and make the block.
Regards

Similar Messages

  • Iphoto crashes when trying to open with the existing db

    Hi there,
    iPhoto keeps crashing when i try to launch it with the existing db. I can open it with a new db but am not sure how I can get the old one working.
    I love using iPhoto with all the events, faces and other features. Is there a way to get all them back?
    Thank you in advance
    Here is the crash log:
    Process:         iPhoto [270]
    Path:            /Applications/iPhoto.app/Contents/MacOS/iPhoto
    Identifier:      com.apple.iPhoto
    Version:         9.4.3 (9.4.3)
    Build Info:      iPhotoProject-720091000000000~1
    App Item ID:     408981381
    App External ID: 15017489
    Code Type:       X86 (Native)
    Parent Process:  launchd [123]
    User ID:         501
    Date/Time:       2013-08-30 17:40:29.477 +0300
    OS Version:      Mac OS X 10.8.4 (12E55)
    Report Version:  10
    Interval Since Last Report:          223 sec
    Crashes Since Last Report:           1
    Per-App Interval Since Last Report:  8 sec
    Per-App Crashes Since Last Report:   1
    Anonymous UUID:                      14DBC6AD-2C67-87D4-F3EB-208F45A7B3D8
    Crashed Thread:  0  Dispatch queue: com.apple.main-thread
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Application Specific Information:
    *** Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: '*** -[__NSArrayM insertObject:atIndex:]: object cannot be nil'
    Application Specific Backtrace 1:
    0   CoreFoundation                      0x921a0e8b __raiseError + 219
    1   libobjc.A.dylib                     0x95c5a52e objc_exception_throw + 230
    2   CoreFoundation                      0x920ac07b -[__NSArrayM insertObject:atIndex:] + 299
    3   CoreFoundation                      0x920abf40 -[__NSArrayM addObject:] + 64
    4   iPhoto                              0x00069858 iPhoto + 256088
    5   iPhoto                              0x00350d0c iPhoto + 3300620
    6   iPhoto                              0x0026065c iPhoto + 2315868
    7   libdispatch.dylib                   0x982f1cb1 _dispatch_barrier_sync_f_slow_invoke + 80
    8   libdispatch.dylib                   0x982ebc82 _dispatch_client_callout + 46
    9   libdispatch.dylib                   0x982f12e3 _dispatch_main_queue_callback_4CF + 223
    10  CoreFoundation                      0x9209cc29 __CFRunLoopRun + 1961
    11  CoreFoundation                      0x9209c01a CFRunLoopRunSpecific + 378
    12  CoreFoundation                      0x9209be8b CFRunLoopRunInMode + 123
    13  HIToolbox                           0x92a48f5a RunCurrentEventLoopInMode + 242
    14  HIToolbox                           0x92a48cc9 ReceiveNextEventCommon + 374
    15  HIToolbox                           0x92a48b44 BlockUntilNextEventMatchingListInMode + 88
    16  AppKit                              0x997c993a _DPSNextEvent + 724
    17  AppKit                              0x997c916c -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 119
    18  AppKit                              0x997bf5cc -[NSApplication run] + 855
    19  AppKit                              0x997625f6 NSApplicationMain + 1053
    20  iPhoto                              0x0003b0b9 iPhoto + 65721
    21  iPhoto                              0x0003a705 iPhoto + 63237
    Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
    0   com.apple.CoreFoundation                0x921a16a7 ___TERMINATING_DUE_TO_UNCAUGHT_EXCEPTION___ + 7
    1   libobjc.A.dylib                         0x95c5a52e objc_exception_throw + 230
    2   com.apple.CoreFoundation                0x920ac07b -[__NSArrayM insertObject:atIndex:] + 299
    3   com.apple.CoreFoundation                0x920abf40 -[__NSArrayM addObject:] + 64
    4   com.apple.iPhoto                        0x00069858 0x2b000 + 256088
    5   com.apple.iPhoto                        0x00350d0c 0x2b000 + 3300620
    6   com.apple.iPhoto                        0x0026065c 0x2b000 + 2315868
    7   libdispatch.dylib                       0x982f1cb1 _dispatch_barrier_sync_f_slow_invoke + 80
    8   libdispatch.dylib                       0x982ebc82 _dispatch_client_callout + 46
    9   libdispatch.dylib                       0x982f12e3 _dispatch_main_queue_callback_4CF + 223
    10  com.apple.CoreFoundation                0x9209cc29 __CFRunLoopRun + 1961
    11  com.apple.CoreFoundation                0x9209c01a CFRunLoopRunSpecific + 378
    12  com.apple.CoreFoundation                0x9209be8b CFRunLoopRunInMode + 123
    13  com.apple.HIToolbox                     0x92a48f5a RunCurrentEventLoopInMode + 242
    14  com.apple.HIToolbox                     0x92a48cc9 ReceiveNextEventCommon + 374
    15  com.apple.HIToolbox                     0x92a48b44 BlockUntilNextEventMatchingListInMode + 88
    16  com.apple.AppKit                        0x997c993a _DPSNextEvent + 724
    17  com.apple.AppKit                        0x997c916c -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 119
    18  com.apple.AppKit                        0x997bf5cc -[NSApplication run] + 855
    19  com.apple.AppKit                        0x997625f6 NSApplicationMain + 1053
    20  com.apple.iPhoto                        0x0003b0b9 0x2b000 + 65721
    21  com.apple.iPhoto                        0x0003a705 0x2b000 + 63237
    Thread 1:: Dispatch queue: com.apple.libdispatch-manager
    0   libsystem_kernel.dylib                  0x9496c9ae kevent + 10
    1   libdispatch.dylib                       0x982eec71 _dispatch_mgr_invoke + 993
    2   libdispatch.dylib                       0x982ee7a9 _dispatch_mgr_thread + 53
    Thread 2:: Dispatch queue: com.apple.root.default-priority
    0   libsystem_kernel.dylib                  0x9496980e semaphore_wait_trap + 10
    1   libdispatch.dylib                       0x982f0e70 _dispatch_thread_semaphore_wait + 25
    2   libdispatch.dylib                       0x982f0ccc _dispatch_barrier_sync_f_slow + 149
    3   libdispatch.dylib                       0x982ed3fb dispatch_barrier_sync_f + 37
    4   libdispatch.dylib                       0x982f1c5a _dispatch_sync_slow + 70
    5   com.apple.iPhoto                        0x002605fc 0x2b000 + 2315772
    6   com.apple.Foundation                    0x913c9f27 -[NSBlockOperation main] + 188
    7   com.apple.Foundation                    0x9139d259 -[__NSOperationInternal start] + 740
    8   com.apple.Foundation                    0x9139cf64 -[NSOperation start] + 67
    9   com.apple.Foundation                    0x913a5039 __block_global_6 + 135
    10  libdispatch.dylib                       0x982eff8f _dispatch_call_block_and_release + 15
    11  libdispatch.dylib                       0x982ebc82 _dispatch_client_callout + 46
    12  libdispatch.dylib                       0x982ecf02 _dispatch_worker_thread2 + 285
    13  libsystem_c.dylib                       0x995c0e72 _pthread_wqthread + 441
    14  libsystem_c.dylib                       0x995a8d2a start_wqthread + 30

    Here's how to repair your iPhoto database.
    How to Rebuild/Repair an iPhoto Library.

  • HT1926 I received an ITunes and Quicktime update notice on my Windows 7 PC, from Apple this morning. During the update installation, RealPlayer installed. What gives? Why is Realplayer installing with the Apple software.

    I received an ITunes and Quicktime update notice on my Windows 7 PC, from Apple this morning. During the update installation, RealPlayer installed. What gives? Why is Realplayer installing with the Apple software.

    Thanks for the reply. I went back to check if there was a history in windows (Event Viewer) but could not locate it in Win7. The only updates that were in the Apple Updater window were the Quicktime and ITunes. Had I let the Realplayer continue on its own, it would have installed the Google Chrome and other apps. I let it finish installing and then removed the entire program. I do not remember checking or seeing anything saying that realplayer was being downloaded until after a reboot was requested from the ITunes Update Installer.
    I just thought it was strange since I do not use Realplayer and have not downloaded any software for it.
    I am on a corporate PC with a pretty thick firewall, but something may have slipped through.
    Thanks again for the assistance.

  • Automated process to compare new data with the existing

    Below is the requested task and I am not sure if I can do this with only Database and ETL skill.
    "New customers access out site and I get a http:// request notifying me with new people accessing our website. I need to somehow take this new customer and compare with the existing customer table  and make sure that it is not an existing one.
    If it is new , I need to send a http:// notification back to a third party saying that this is new. Also, this all has to be done REAL TIME. "
    I am not sure if I can do all these real time by just using SSIS .
    Any input is much appreciated. Stay warm Folks!

    A new customer has to register, am I right? Then issue SELECT * FROM Customers WHERE Customerid=@CustomerID IF @@ROWCOUNT=0 that means it is a new one... You can use EXEC msdb.dbo.sp_send_dbmail to send a notification ....
    Best Regards,Uri Dimant SQL Server MVP,
    http://sqlblog.com/blogs/uri_dimant/
    MS SQL optimization: MS SQL Development and Optimization
    MS SQL Consulting:
    Large scale of database and data cleansing
    Remote DBA Services:
    Improves MS SQL Database Performance
    SQL Server Integration Services:
    Business Intelligence

  • Complete my album downloads the missing tracks but then does not place it with the existing tracks in iTunes. i have a single song bought sat on its own and an album with a track missing, any ideas?

    complete my album downloads the missing tracks but then does not place it with the existing tracks in iTunes. i have a single song bought sat on its own and an album with a track missing, any ideas?

    I had this same problem and started a thread, but for the most part nobody responded and those who did somehow didn't understand what the problem was.
    http://discussions.apple.com/message.jspa?messageID=11504935#11504935
    I'm sure the problem is sweat getting into the apple supplied headphone "remote." Basically even the smallest drop can slide down the wire and get into the unit.
    Unfortunately I haven't found a solution other than to get a Belkin remote adapter and some sport headphones. This doesn't give you voice over, but you can still control the volume, skip, etc.
    I've been doing this for a couple weeks now and it hasn't had a freak out since.

  • HT3258 Why is Parallels incompatible with the new OS? What can I do about it?

    Why is Parallels incompatible with the new OS? What can I do about it?

    Upgrade?
    https://discussions.apple.com/message/19059850#19059850

  • I recently had my hard drive replaced and now iTunes won't allow me sync my iPhone without deleting all the media contents and replacing it with the existing library. Is there another way without erasing everything?

    I have already backed up my iPhone, yet it still will not allow me to move the contents of my phone onto my computer. Rather, it wants to delete everything off of my phone and replace it with the contents on my iTunes. Is there a way I can integrate both my iTunes and iPhone? There used to be autofill on iTunes, but I can no longer find it.

    Hello there, DollyVong.
    The following Knowledge Base article has great information and steps to follow on getting purchased content from your iOS device to your computer:
    iTunes Store: Transferring purchases from your iOS device or iPod to a computer
    http://support.apple.com/kb/HT1848
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro D.

  • Different Migo posted on the same delivery note number with the same vendor

    Hi Experts,
    We are facing a peculiar problem while saving migo in the sytem. The system is allowing to post more than one migo with the same delvery note number with the same vendor code in the same financial year. Ideally shystem should give some informative / error messgage during saving one migo. In our company, we capture party invoice number in the delivery note option. Our problem is more promintent if the vendor is non excisable.
    How to check this problem.
    Regards
    GR

    Hi,
    In Standard SAP, no check is available on "Delivery Note" field for duplicacy. This is only available for "Reference" field in MIRO.
    If you want to have a check on "Delivery Note" field in MIGO then go for some ABAP Development using BAdi or Enhancement Spot "MB_MIGO_BADI".

  • Why cant unget apps with the iphone 3g?

    Why cant i get apps with the iphone 3g. It always either says it is incompatible with the iphone or it says it requires a higher ios thing

    More than likely the app you are trying to download requires an iOS higher than iOS 4.2.1, which is the highest iOS you can put on the iPhone 3G. It is up to the developer regarding support for older iOS, and most have gone past iOS 4.2.1. The only alternative is the purchase of a new phone, or not use the app.

  • I am unable to authorise my new ereader with the existing adobe digital editions account

    i am unable to authorise my new ereader with my existing adobe digital editions account

    You should ask in the Digital Editions forum, giving full details of your problem. Adobe Digital Editions

  • Adding an entity with a COA that is not compatible with the existing one

    Hi guys,
    I'm facing quite a challenge right now. I'm working in a client who sells car, so they have several stores that consolidate in one parent. The current application has more than 5000 accounts (BS and P&L).
    They also have a bank who was left out to the initial scope of the implementation. Now, it's going to be added.
    The thing is that the bank has a different chart of accounts (really different!), and I was recommended the following steps:
    1. Keep the current BS and P&L but rename them as CarRet_PL and CarRet_BS
    2. Add Parent accounts: "Group_PL" and "Group_BS"
    3. Create an additional structure: "Bank_PL" and "Bank_BS" with the chart of accounts of the bank.
    4. Make both PL and both BS consolidate to Group_PL and Group_BS.
    So, in the end, we'll have 2 BS and 2 P&L... I'm not quite sure if this is the right approach. For me, it'd be best to use the existing structure, and add some accounts if necessary.
    Could you please let me know your thoughts?
    Thank you.
    Lu

    Hi there,
    Sounds very complicated to me... I don't think you'll meet all the requirements by only creating one consolidated balance sheet & income statement by combining the two sub-BSs and sub-ISs. If the two balance sheets are a must, to me it would be good idea to sit down with the group accounting team and go through at which level they need to present/see the data and build the group hierarchy accordingly. Ie:
    Group BS
         Current Assets - Group
              Current Assets - Cars
                   CarAccount1
                   CarAccount2
              Current Assets - Bank
                   BankAccount1
                   BankAccount2
         Equity - Group
              Common and preferred stock - Group
                   Common and preferred stock - Cars
                   Common and preferred stock - Bank
                   Whatever Bank accounts come next
              Retained earnings - Group
                   RE - Cars
                   RE- Banks
    etc.
    It will surely not be easy like that either...
    Hope this helps!        

  • MRP output for dual procured item with some existing firmed delivery items

    we having an item (eg. A) which is dual procured one (i.e as Local & Subcontracting procurement).Because of capacity constraint at Subcontracting vendor we have negotiated with the Local Vendor in such a way that he will deliver 10000 for Aug, 50000 for Spet & 40000 for Oct & the balance requirement in the respective months should be procured through subcontracting vendor. Also for the above mentioned quantities already PO is created with delivery schedules as above for each month.now the requirement for A is Aug:98000, Sept:150000, Oct:150000, Nov:150000 & Dec:425000 & already there is a P.O for 98000 on Subcontracting vendor whose delivery is in Aug. with these requirements & above receipts (P.O on Local Vendor), we are expecting system to give a PR in Sept on Subcontracting vendor for 100000 piecies. But system is rescheduling the P.O on Local vendor in Oct & giving a PR (Subcontracting) for 60000 piecies. Can any help how should we restrict system not consider the Oct receipt for Sept Month & give a PR (Subcontracting) for 10000 piecies. I have tried the entire scneario with Quota Arrangement also. But system is again considering the Oct's P.O & subtracting the requirement & then splitting the remaining qty as per the Quota.
    Can any one help please.
    Thanks in advance
    Regards,
    SVR

    Hi,
    Rescheduling logic can be controlled via customization definitions (transaction OPPQ), in such a way that the system will not consider future receipts, or limit the horizon in which it happens.
    Regards,
    Mario

  • Inbound delivery quantity update with the confirm putaway quantity

    even if i set up the update indicator (1or 2) during a TO confirmation, the system do not update the inbound delivery with the quantity confirmed, especialy in case of difference.
    this option is possible during the TO creation, but not works with during the TO confirmation, could you help me?

    It works with the outbound delivery only.
    Though updating quantities in inb. delivery would be very useful for quantity difference handling.

  • Why Wont GPS Work with the Nokie 5530 + Nokia LD-4...

    Ok, ive played around with all the settings, etc. The only lights being displayed on the ld-4w gps module are the green light and the blue light. the gps light is not turning on. it is all paired with the nokie 5530 phone.
    Ovi maps is installed, all the firmwire is updated.
    When i start the application 'Location' (the one thats included with the phone), it says searching for GPS devices. Then it says 'Waiting for gps', then (nearly instantly) it shows 'GPS Not Availible' and exits. After that it displays 'No Connection'.
    I have tried by going into my back garden and doing this but it still does not work.
    However, when I use ovi maps and type in a route, it displays 'Waiting for GPS' for a  long time, then it does not connect either, but then it also asks for an internet connection, which i dont have as i dont have any credit on my phone, and i also dont have wireless internet.
    If this is the problem, then why doesent the gps light on my ld-4w even blink?
    Please help, i need this GPS module up and running before my sisters birthday party lol (17th april)....so please help..its urgent!
    Solved!
    Go to Solution.

    Woohoo!! I finally got this working...what I did was I held the power button down for about 10 seconds until the lights alternated between green and red, and then i turned it back on again. Then while holding the power button down, i plugged it in the charger.
    Then i turned it back on again, and paired it with the 5530xm again, and it showed waiting for gps for about 5 mins, then it displayed some co-ordinates! Then i started ovi maps then it showed my location!
    Yeeeaaaahh!! it finally works!! Looks like it wasent nokias fault after all!!

  • Will the MapViewer OC4J instance conflict with the existing one?

    Hello,
    I want to install the MapViewer Quick Start kit, connecting it to my already-installed Oracle Database 11g Standard Edition. I also have installed Application Express 3.2. This is on a Windows XP workstation, for development use.
    My question is, am I supposed to unzip the contents of the kit (or the contents of the mv10133_qs directory inside the zip archive) into the existing oc4j instance that installed with the database, i.e., ORACLE_HOME\oc4j? Or do I install the entire kit into a separate directory, for example ORACLE_HOME\oc4j_mapviewer? If the latter, will this mean that I will have two unique OC4J instances running? And will this produce a conflict? (I'm not sure what the Database-installed oc4j instance does, if anything. Perhaps run the Enterprise Manager Database Control?).
    Thanks for any response.
    -Dan

    You should install (i.e., unzip) the MapViewer quick start into a separate directory and start its OC4J from that directory. Do not unzip it into your DB's (or any other product's) OC4J directory, as that will most certainly mess up both OC4J instances.
    It's perfectly fine to run two OC4J instances on the same host. There should be no conflicts, except maybe network listener ports which you can easily fix from MapViewer's OC4J (as I assume you don't want to change the DB's OC4J settings). Just try it and let us know.
    LJ

Maybe you are looking for

  • Billing doc types

    Hi Gurus, Can I confirm that invoice list is not a billing doc type and Returns and External transactions are also not billing doc types. I am not sure if only 'returns' is mentioned, does it mean the Returns order , the Returns delivery or credit me

  • Netscape vs. Java 2 Security model

    Hi, new user here, downloaded and installed Java Virtual Machine plug-in, 1.4.2-b28, Wednesday evening. Added Java capability to IE 6.0.28. Running XP. Encountered a problem with a URL that had worked with Microsoft VM on another machine on my home n

  • Best modem routers for macs

    Help! having ord experience with a modem/router which would be much happier connected to (gasp) a windows machine. macbook pro 6,1 & imac 9,1 desire a much friendlier and reliable m/r wich a bit of oomph, speedwise. Please, if it's working for you, o

  • How to uninstall photoshop CS2

    I have tried everything to uninstall an old version of CS2. Is there anything that works?

  • Unable to Initiate BPEL Flow using BPELConsole

    Hi, I would appreciate some assistance in the following... Recently whenever I try and Initiate a BPEL flow through BPELConsole (logged on as bpeladmin) I receive the following message: "The following exception occured while processing this request: