Why did my main stage stop responding?

I try to open from the dock and from within the applications menu and it won't open either way. When I go to force quit and it says "Mainstage not responding" I was able to get into it one time and it worked and I was excited with the possibilities... now =(
If anyone has had any experience with this problem and can help... pleeeeeeeeeze do! =) Mark

aerol wrote:
..... Scanning EXS Instruments then these appear to be fixed.
Hi
Not 'quite'.... MS 2.2.1 does not scan for Sampler Instruments stored using Alias folders with more than 1 level.
So it does not take so long to scan... ;-(
CCT

Similar Messages

Why did my iPad 2 stop responding last night after an ad poped up from the FIFA 12 app?

After starting the FIFA app a pop up ad came up then my iPad stopped responding and froze. I tried double clicking the home button to froce close the app, that's when the iPad shut itself down and restarted on its own. Has this happened to anyone or what can I do to prevent this from happening again.

I do not know of any way a device can do anything when sleeping.
Unfortunately, I do not know of any log files (similar to ones on a computer).
I would check with your ISP or phone service provider to see what is going on (they should have log files).
Barry

Why does my iPad mini stop responding to wifi after a period of time?

Why does my iPad mini stop responding to wifi after a period of time?
For example, I can connect to wifi and use Safari and my iPad's interet capabilities with no problem. But if I then leave my iPad alone for an hour - when I go back to using it, it still shows as being connected to the wifi, but is unresponsive - i.e. web pages will not load etc. - I have to disconnect and reconnect to the wifi to make it responsive.
In advance, thanks

Try #5
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Mac OSX Lion: Why does PS CS6 BETA stop responding after attempting to import pdf?

Mac OSX Lion: Why does PS CS6 BETA stop responding after attempting to import single pdf or multiple pdfs? frequently happens(2/3 times)

Can you provide any more information about the files that are causing the problems? Are these particularly large files? Many pages or images? Have you opened these files in Photoshop CS5, or other versions of Photoshop?
What do you see when you try to import these PDFs? Do you get the PDF Import dialog, allowing you to select pages or images from the PDF? Is so, is it hanging when you click OK or at another time?
Any more details about the problem or other info (as well as sample files) you can provide, the easier it will be for us to help identify the cause of your problems.
Paul

Why did my time capsule stopped backing up?

Why would my time capsule stop backing up, it is set to delet when the drive is full?

LaPastenague wrote:
Many people report that TM no longer deletes old backups as it should.
That does happen sometimes, but for many different reasons.
TM should never run out of space
Yes, it can. First, remember that it deletes entire backups, not the backups of individual files. Second, it won't ever delete the last remaining backup.
So if it needs to do a very large backup, there needs to be room for the last remaining backup, plus the new one, plus some workspace. That's why we recommend that the TM drive be 3-4 times the size of the data it's backing-up. If it's much less than that, and there's a need for a large or full backup, there may not be enough room.
as i understand how it works, it should simply give a warning that the old backups need to be deleted.
That's how it worked on Leopard, if you had the "Warn when old backups are deleted" option checked -- the backup would fail if there wasn't room. All you had to do then was remove the check, but many folks didn't understand that.
So, effective with Snow Leopard, the option is now "Notify after old backups are deleted," and that's what happens -- old backups are deleted automatically when necessary, and a notice is sent only after the new backup completes.
It seems that after an upgrade install of the OS.. TM ceases to have the ability to delete old backups.. it simply runs out of space and refuses to backup.
Normally not. Some have turned out to be users who actually did a "clean install," erasing their internal HD. If you do that, and don't use either Setup Assistant or Migration Assistant to put your data back (and transfer Computer Settings), the erased drive is treated as a different one. In that case, TM will do a full backup, so requires a lot space.
However, effective with Mountain Lion, TM does add more space for "padding" than before, sometimes quite a bit more, so a drive that was barely large enough on Lion or earlier may be too small now.
EDIT: A good way to figure out what's going on is to look at the log messages, either by using Console and filtering for backupd, or via the widget in #A1 of Time Machine - Troubleshooting
Message was edited by: Pondini

WHY DID MY PHOTOSMART 6510 STOP FUNCTIONING AFTER BEING GREAT!!!

why did my photosmart 6510 suddenly stop printing??

Hi RENTANURSE,
I'll need more information from here to assist. Is there an error when printing? Which type of computer are you using? What is the connection from the printer to the computer?
I was an HP employee.
Please mark the post that solves your problem as "Accepted Solution"

Why does Firefox tend to stop responding

Almost on a daily basis Firefox stops responding out of nowhere. At first I reckoned it might be my installed add-ons, that were poorly written, that screwed up the system. After disabling them the problem kept reoccuring. It tends to run really sluggish and it doesn't help my productivity level this way. Can anyone help me? If you have an idea please respond in common language: I'm not that much of a computer wiz. Thank you!

Almost on a daily basis Firefox stops responding out of nowhere. At first I reckoned it might be my installed add-ons, that were poorly written, that screwed up the system. After disabling them the problem kept reoccuring. It tends to run really sluggish and it doesn't help my productivity level this way. Can anyone help me? If you have an idea please respond in common language: I'm not that much of a computer wiz. Thank you!

Why did my CanoScan 8800F stop scanning my 35mm slides into IPhoto 09 version 8.1.2 (424)? I did it exactly the same way as I had done about two hundred other slides.

I had been using my CanoScan 8800F unit to transfer 35mm slides into digital pictures within my IPhoto 09, Version 8.1.2 (424).
All of a sudden it stopped transferring photos even though I could hear it scanning. Any ideas "why/"

I guess I will wrap this up. I have abandoned iPhoto and viewing my Photo Streams using it and moved to Adobe products (Bridge + PS). So that's that.

Why did my 5G Classic stop putting out audio to peripheral ipod connectors?

My 5th Gen 80Gb iPod Classic was working superbly until this past April. I used it in a Sony iPod Dock and my new Tundra using the USB connection religiously for the past two years. It worked fine without any issues until one day in mid-song, the sound went out while playing in the Sony. The iPod was still playing, but no sound was being output to the Sony dock. (This did happen on a beach in 80 direct degree sunlight onto the Sony unit, but the dock is covered by a door and little sunlight would get to the iPod). I then returned it to my Tundra audio via USB and it did not wake up automatically and get recognized by the audio system as it did before. I had to press the wheel button to get the Tundra's audio system to recognize it, but then it played (and still plays) fine thru USB. I since purchased an iOn Block Rocker, with an iPod dock that I have tested with an iPhone, and it works perfectly. I plugged my iPod Classic into the same jack and it will not output any sound to the iOn either., not even thru the RCA jack via the earphone connection. I tested the RCA with my Infuse 4G Phone and IT worked perfectly as well. I think there may have been some event with the accessory interface pin(s) on the iPod (if such a thing exists) or maybe one of the chips that processes the accessory signals got hosed
Anybody here have an idea what causes this behavior and how to fix it. I have reset my iPOD to factory defaults a few times and have updated it to the latest software version thru iTunes. Any knowledge or assistance would be greatly appreciated.

If the reset does not work try the remaining items of:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Why did Home Sharing suddenly stop working for PC libraries?

BACKGROUND: Ecosystem consisting of one PC with medium-sized iTunes library (7,000+ songs and 3,000+ photos), 2 Mac Minis, two MacBook Airs, Apple TV 2, Airport Extreme Base Station, Airport Express in extender mode, Windows Home Server 2003 with iTunes server module, iPhone 4s and iPad 2.
All the latest updates installed. Airplay, Photostream, iCloud and Home Sharing all installed and everything working happily, as advertised. I've had other issues, like everyone else, but Home Sharing has worked pretty much without fail for as long as I can remember -- years.
THEN, SUDDENLY: On the evening evening of Sunday October 23, 20011, Apple TV stops seeing "Arthur's Library" -- my main library, located in the latest update of iTunes, on my PC.
AND IT VANISHES ELSEWHERE: I click on "Arthur's Library" and the B&W "wheel" ground for about ten seconds -- then the library disappeared. Figuring it might be an Apple Tv issuem I opened my Air, loaded iTunes, attempted to load "Arthurs Library" and the same thing happened. Library just disappeared.
So I go to my PC and fiddlewith iTunes.
Turn off home sharing, reboot for the heck of it, turn home sharing back on.
And the library reappears on Apple TV and other home share devices...
Only to DISAPPEAR when I tried to load it, exactly as before!
So I dutifully go through all the other trouble-shooting steps suggested by the oft-quoted Apple Support article, plus some others:
1. I turn off photo sharing, because I had been doing this over the weekend, just prior to failure of home sharing. No dice.
2. Power off both routers. Wait. Restart. No joy.
3. Check firewall settings. All as they should be,
i
* I kind of doubt it's a router issue, because home sharing works just fine with the Macs.
* Kind of doubt it's an interference issue, because Airplay from my iPhone and iPad to the Apple TV works like a charm.
* Can't think of any updates of any kind installed in between "all systems go" and "FAIL"
ANOTHER CLUE? The little "Airplay" icon that normally appears in the bottom right-hand corner of ITunes on my PC has disappeared. So maybe the issue is BONJOUR? Okay, I go into Services, and Bonjour is running. I stop it, restart it, then restart iTunes on my OC, ditto on my MacBook Air. No joy. And now, as I'm writing this, I notice a...
SECOND MYSTERY! Suddenly, my Mac can't load the library from my Windows Home Server 2003 installation, which has NOTHING TO DO with Home Sharing. This thing has ALWAYS worked everywhere before. Now the wheel just grinds endlessly, whenever I try to load the library on my server.
I'm out of my depth, guys. HELP! And thanks in advance for your time and advice.

Well, the first problem resolved itself just as mysteriously as it arrived, spurred perhaps by yet another Windows patch or Who Knows What. The second problem persists. Suggestions?

Why did form fields suddenly stop functioning or calculating!!!

All the forms I have created stopped working from one day to the next. The numbers I enter in a field that have to change to dates, dollar amounts, and/or totals, won't do anything. I have used these forms for over a year without a problem, until now. Why is it doing this? We use these on a daily basis and need these calculations. We have to enter calculations in manually which defeat the purpose of this feature. Please help.

Answers:
1. Form was created in Acrobat 9 Standard.
2. We repeatedly open this form and save as something different. Other forms, we open often as well and just save (to replace).
3. I have attached one of the forms. The odd thing is that its the same case with ALL of our forms without exception.
4. Usage rights should not be restricted
5. We are using Acrobat 9 Standard

Why did my icloud account stop working?

My iCloud email has been working fine with my iPhone 4s running IOS5 until recently. It recently started telling me that my password was not correct even though I had not changed anything.
I was thinking this may be because the account was entered as a @mac.com username, so I thought I might be able to fix this by changing it to the @icloud.com address, but it appears that that field is not editable.
So I then tried to add a new account with the same username, but at @icloud.com. It then complained that an account with the same username already existed (@mac.com).
Do I have to delete this account and then re-add it? Did Apple document this change that caused it to stop working? I'm wary of deleting accounts because I once lost all my contacts doing so.

Did you tried to use the "original" mail address that you use to create the Apple ID?
You can't have 2 iCloud Accounts in the same device.
You can delete the Account with safety by turning off categories (Contacts, Calendars etc.) one by one and choose "Keep on my iPhone" when you prompt. Then re-add your Account.

Why did my iMessage suddenly stopped working?

My iMessage was working fine and it suddenly stopped a couple weeks ago. I am still able to send messages to people, but I am unable to recieve messages from iphone users (I can text freely with androids). I noticed that at first my imessage will send as a blue, but after a couple seconds it turns green. I tried turning off my imessage, and turning it baclk on to which I was prompted to relogin to my apple account. When I tried to login it would keep saying that I had the wrong password (which I am very sure was not the case). My apple store still works, but I am unsure why my imessage doesnt. Does anyone know a solution for this?
**I am currently operating on ios 7.0.4 could this be the case?

If it is displaying "incorrect password" when signing into iMessage, why exactly do you believe the is incorrect?
Enter the correct login credentials. Until this occurs, iMessage will not re-activate.

Why did my touch screen stop working?

Very upset my touch screen stopped working on phone new years eve. What could be wrong??

flakris,
Oh no! This is not what we like to hear. I want to make sure that we are able to get your phone back up and running. Is there any kind of physical or liquid damage to the device? Can you try to press and hold the Power and Volume Down buttons until the device powers off then release (approximately 10 seconds). Please keep us posted.
KevinR_VZW
Follow us on Twitter @VZWSupport

Why did my voice texting stop working on all devices?

All of a sudden my voice for texting and IMessage stopped working on both my ipad mini and iPod touch.
It is enabled in settings and I have tried a hard boot.

Github is not a CDN (content distribution network). Github is a script download repository. You must not directly link to scripts on Github because they lack proper headers and will fail to load across many browsers, firewalls and proxy servers.
You can safely use scripts hosted on recognized CDNs like Google api, Microsoft, jQuery, Cloudflare and others.

<script src="http://code.jquery.com/jquery-latest.min.js">
</script>

<script src="http://cdnjs.cloudflare.com/ajax/libs/jquery.cycle2/20130409/jquery.cycle2.min.js"></script>
Personally, I prefer to use scripts hosted on CDNs whenever I can because it makes the web faster for everyone. However if you can't find your plugins on CDNs, then you must download the scripts & host them on your own servers.
Nancy O.

Why did my main stage stop responding?

Similar Messages

Maybe you are looking for