Why do I get an invalid email address when gifting an item or itunes gift card?

I have read additional discussions and they have indicated not to use the contact but enter the actual email address itself. To no avail i continue to get the same error. Frustrated incorporated :-(

bsat, thank you for helping out!
I had tried using only one ncReset previously and was experiencing driver errors. I removed the second ncReset as you suggested and now it seems to work with only one. I cannot get it to fail like it was doing.
However, at least one ncReset must be used or I get the following error:
ERROR ncConfig CAN1: Driver error (qual=000b000)
Press any key to continue
I get this error even when the program terminates normally. For example:
1) Build obj2obj with the ncReset command.
2) Execute and allow to terminate normally.
3) Edit obj2obj and remove ncReset command.
4) Execute and the error message is displayed.
Amazingly, I was also able to single step through most of the program this morning. I got the first three messages (of 10 total) before ge
tting the error:
Microsoft Visual C++
First-chance exception in cctool.exe (NTDLL.DLL): 0xC0000008: Invalid Handle
It seems to be more random than first appeared and perhaps more related to MSVC than to the NI-CAN card. Any insight?
Also, having to include an ncReset is undesireable since I'd like to develop a CAN driver that could be called from multiple threads. I'd be very interested in your opinion on why I'm having trouble getting it to work without one.
Thanks again for your help, it is greatly appreciated!

Similar Messages

Why do I get an error code 5002 when trying to redeem an iTunes gift card?

I have an iTunes gift card and everytime I enter the redemption code I get an error code 5002. Sure would like to be able to redeem my card.

This alert is often the result of an issue with verifying your billing.
Quit iTunes.
Open iTunes.
Test the issue.
If it persists, sign in to store.apple.com using your iTunes account
Click on Change account information
Modify or remove your credit card information.
Click Continue.
Test the issue.

Why do I get an "invalid signature" message when trying to download the latest version of iTunes?

Why do I get an "invalid signature" message when trying to download the latest version of iTunes? Apple Support is the lamest excuse for support I have EVER seen.

That suggests that the installer is getting damaged during the download.
I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

Why does aol not auto enter email addresses when I compose an email?

why does aol not auto enter email addresses when I compose an email?

what a ridiculous decision to change from "starts with" to "contains".
I have a further problem - having selected the address I want from the umpteen options pulled from my address book, I then press enter to add another line for another address.....and the first address I selected changes to a completely different address!
And also addresses from the address book which previously appeared only in black now randomly appear in red.
help please!

I get message "invalid email address"

when using my ipad, iphone I will get "invalid email address" message!

See > http://www.apple.com/support/ipad/mail/

When trying to set up Sync account and enter my actual password, I get an "invalid email address"warning. Help...

When I go into Sync and try to set up an account, I am asked for email address (which is <[email protected]>. Immediately as I enter the "meinig58" the "invalid email address" red warning comes up. How do I solve this problem and establish my Sync account?

Write the whole email address and wait for a second to validate it.
The validator tells you that you have entered the wrong email until you finish typing a valid one. Developers are working to fix it.

Trying to set up a group email "RAM" that will contain multiple email addresses. Receive error messages "check SMTP settings" or "Invalid email address" when I try to send a message to the group.

I am trying to set up the group email "RAM" that will contain multiple email addresses. I have inputted the name "RAM" as a corporation. In the section labeled "Email" I have inputed multiple email addreses so that when I want to send an email to the group "RAM" I just have to input the name "RAM" in the section labeled "To" , input the Subject in the Subject box & the email will be sent to the multiple addresses, yet when I do I receive either one of two error messages being "Invalid Email Address" or "Check SMTP settings" each of which allows me the option of with cancelling the email or send it anyway.

Bump. I'd like to know, too. I even have some synched Groups from my Apple Address Book I email to using Apple Mail on the Powerbook, but I can't see how to do a group mailing on the Touch either.
In normal Mail, I just start typing the name of the group, and it autocompletes, I hit return, and it fills in all addresses in the Group.

Why did I get a new email address?

I don't understand how I got a new email address with iCloud. My mobile me email address was [email protected] That still shows up in Mail.app as iCloud except that I can no longer log in. Now there is a new account in Mail.app named [email protected] for which I don't know the password. How can I get this fixed?   I really don't want to change my email address for every contact that I have.

Do you mean your BlackBerryID?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Cannot send to mailing list - get msg "invalid email address"

I have set up a mailing list for the first time.
It all seems pretty straightforward and to test it I have used my email address as the only one on the list.
however when I try to send to the list I get the message above.
any help very welcome
thanks

have you got a space either before or after the text of the address. clicking and highlighting the address in the address book should show that space up if it exists.

Why do I get the message "Insufficient Permissions" when trying to download updated iTunes software

Why do I get "Insufficient Permissions" message?

That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Why do I get an invalid handle error when debugging, on a call to ncReset?

I am working with the example program obj2obj.c
I have a PCI-CAN/2 card installed.
I must call ncReset for *both* ports (CAN0 and CAN1), prior to any other commands or I will get a driver error (NC_ERR_DRIVER, Bxxx0002).
This happens even if the program terminates properly, closing all handles, and I then remove the ncReset commands.
Fine, I can live with the ncResets.
However, if I then try and debug the program using Microsoft Visual C++, it immediately chokes on the second call to ncReset( "CAN1", 0 ) and complains about an invalid handle.
If I add a status check to both of the ncResets and run the program from the DOS command line, I don't get any errors printed out
so the calls are working fine just running the program.
The driver updates listed do not appear to address this problem (1.4.1 uses LabView which I do not have and 1.4.2 is for Windows 2000)
Why are the ncResets required in the first place?
And why can't I single step through the second call to ncReset?
Thanks in advance for your help.
System details:
PC running Windows NT 4.00.1381
PCI-CAN/2 w/driver 1.4
Microsoft Visual C++ 6.0 Professional

bsat, thank you for helping out!
I had tried using only one ncReset previously and was experiencing driver errors. I removed the second ncReset as you suggested and now it seems to work with only one. I cannot get it to fail like it was doing.
However, at least one ncReset must be used or I get the following error:
ERROR ncConfig CAN1: Driver error (qual=000b000)
Press any key to continue
I get this error even when the program terminates normally. For example:
1) Build obj2obj with the ncReset command.
2) Execute and allow to terminate normally.
3) Edit obj2obj and remove ncReset command.
4) Execute and the error message is displayed.
Amazingly, I was also able to single step through most of the program this morning. I got the first three messages (of 10 total) before ge
tting the error:
Microsoft Visual C++
First-chance exception in cctool.exe (NTDLL.DLL): 0xC0000008: Invalid Handle
It seems to be more random than first appeared and perhaps more related to MSVC than to the NI-CAN card. Any insight?
Also, having to include an ncReset is undesireable since I'd like to develop a CAN driver that could be called from multiple threads. I'd be very interested in your opinion on why I'm having trouble getting it to work without one.
Thanks again for your help, it is greatly appreciated!

Why do I get a invalid WEP key when installing my printer?

Product specific document -
http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&cc=us&docname=c00772798&dlc=en
DaniW
HP Forum Admin
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"
This question was solved.
View Solution.

This also works (pretty much) with the J6480 printer. I was using a Linksys wireless 'G' router which creates 4 WEP keys letting you choose which one to use. I was sending key #2 and it would not accept it. The only way i could get it to work was to disable wireless security-not my idea of a good option. After numerious emails and 1 voice call to support with no ideas i decided to look here and finally got it to accept the WEP key. I ended up uninstalling/reinstalling completely to get everything to work 100% but now it works like a charm. For those of you with a similar problem, using a router that generates more than 1 WEP key, try using(sending) key #1
note to HP: your email/voice support should be as good as your on-line forum support
thanks to DaniW-now I'm a happy camper

Why am I getting an invalid signature error when I try updating my iphone 4?

.

yes, through Itunes. the os hasn't been updated in awhile, if ever. the phone is still running on 4.2.10 I can't update the new itunes, quick time, safari.

My printer gave me my email adddress, but when i try to sign in it says invalid email address

invalid email address when i try to sign in

Are you trying to use the email address on the print out? That is your ePrint printer code. When you go to http://www.eprintcenter.com you will want to create an account and after you create your account, it will ask for the printer code to customize your ePrint email address.
If you are trying to create an account and it is saying invalid email or email already in use, it means that you have a snapfish account. In that situation, you will want to go to http://www.snapfish.com/ and click the login button in the top right hand corner of the page. When it prompts you to enter your email address and password, click the "Forgot your password?" link and enter your email address. They will send you a email with a temporary password and a link to change the password. After you change the password, go back to http://www.eprintcenter.com/ and log in with your email address and the password you just created.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Why do i get the invalid signature error

Why do I get the invalid signature error when trying to download the latest updates fot itunes

Hi, im getting the same thing,
Been tryin to download it for days but keeps saying "Invalid signature"
I even went into ADD REMOVE PROGRAMS hit Apple software update and change and then repair but this did not work.
Help much appreciated. Thanks

Why do I get an invalid email address when gifting an item or itunes gift card?

Similar Messages

Maybe you are looking for