Why do I get "Error 1 occured at Config Data Registry.vi(get data) invalid object 0" while starting my application?
Why do I get "Error 1 occured at Config Data Registry.vi(get data) invalid object 0" when starting my application created in LabVIEW 7.1? I am starting the application in a PXI rack running Windows XP. I have an executable written in LabVIEW 7.0 that runs without this error. After clicking the Continue button in the error, the application seems to continue happily.
Is there something I need to include when I make the executable?
I would like to understand and eliminate this start up error.
Thanks in advance.
BobNorth
Hi Bob,
I looked through the program and I figured out where the error is coming from, and potentially what is causing it. In a lot of the cases of the program you are searching a 1-D array for the name of the case, and if you don't find it then it skips the function and gives "Error 1 occurred at Config Data Registry.vi(CASENAME) invalid object 0". I attached a screenshot that shows what I mean. The Search 1-D Array.vi is returning a -1 which means it didn't find the case. The reason I believe this is happening is because the shift register for that array is not initialized. While the other cases "reset" and "register" interact with the array shift registers and most likely create the array you need, if the program defaults to the "get data" case then it will try to run that before registering and won't have an array to search. This would also explain why it only has this problem at first and seems to run just fine after that. To fix this you should either make an initial array and wire it into the shift register or make the "reset" case the default as opposed to the "get data" case.
Regards,
Peter W.
Attachments:
Config Data Registry.png 55 KB
Similar Messages
-
Transport user error: invalid object name while starting CMS in CCM
Hi Experts,
I'm not able to start the CMS in CCM.It was working fine. Suddenly it went down due to some data base access failure. After that Iu2019m not able to start the CMS.
Kindly find the event viewer error and information.
Error: The root server reported an error Initialization Failure.
Error: Failed to register object.. Reason: Transport user error: invalid object name..
Information: Central Management Server stopped
Could you please tell me how to start the CMS in CCM? Since I can able to setup CMS Database and audit database successfully.
Regards,
SridharanHi ,
Thanks for the response.I have trace the CMS.I found some error in log file.any idea on the following errors,
trace message: CNSClientManager::VerifyConnection() : search fails(37) - Transport user error: object with the specified name not found.
trace message: CNSClientManager::VerifyConnection() : Failed to query for APSs. Empty cluster list returned.
trace message: TheAPSServer::RegisterApsInNameServer: Fail to register the current APS(Transport user error: invalid object name.)
trace message: CNSClientManager::ClusterInfo::InvalidateAPS: Removing APS from m_ActiveMembers and adding to m_InactiveMembers
trace message: SIServerController:run: Fail to initialize or uninitialize. Reason is The root server reported an error Initialization Failure.:
Regards,
Sridharan -
OS Ver : WinNT 4.0
Labview Ver : 6.1Do you have the run time engine installed? If so, you might consider reinstalling it.
Can you get any LV executable to run? Attached is an executable that runs on my XP box with LV 6.1.
Attachments:
LV_61_build_into_an.exe 55 KB -
Why do I keep getting "Error occurred. Please try later again." , eveytime when trying to watch youtube videos. I have the latest adobe flash player and java so why can't I watch videos at youtube??
It's very, very, frustrating having had so many people tell me I need to change my browser to you guys at mozilla firefox.
I've tried everything but still cannot view the youtube videos. I have a 32 bit Toshiba laptop.
God bless, I await your reply,
DanieleClear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes -
Why does an unknown error occur when I try to save a document as a word file?
why does an unknown error occur when I try to save a document as a Word file?
Hi Judy,
Deleting the Preferences files seems to be missing from your list.
Quit AppleWorks,
In the Finder, go to:
username > Library > Preferences
In the Preferences folder:
Locate and Delete the File com.apple.appleworks.plist
Locate and Open the Folder AppleWorks
In the AppleWorks folder, delete the following files:
AppleWorks 6 Assistants Cache
AppleWorks 6 Preferences
AppleWorks 6 Translators Cache
Optional:
AppleWorks Button Bars
This file contains your Button Bar preferences. If you have made changes to the Button Bar, but hanve NO issues that can be traced to the Button Bar, it may be left in place.
Regards,
Barry -
Each time i try to share my movie to media browser it sais'The project could not be prepared for publishing because an error occurred. (-50)'' how do i get around this
Hi
Error -43
-43
fnfErr
File not found; Folder not found; Edition container not found; Target not found
So Your original is still there ? or did You move or trash anything ?
Yours Bengt W -
I am trying to create a community addition, but just keep getting *Error occurred while saving your data.
Trying to add the following community addtion for: http://technet.microsoft.com/en-us/library/cc755631(v=ws.10).aspx
In the above website do NOT copy the command, you have to type it in. Webpage Error.
You can use both dsquery server –hasfsmo schema and dsquery server -forest –hasfsmo schema
The problem is, I believe, a hidden character in the command on this webpage which follows the Paste function and results in the error Unknown Parameter error.Hi John,
You might have better luck posting this in the library feedback forum here:
http://social.msdn.microsoft.com/Forums/en-us/home?forum=libraryfeedback&filter=alltypes&sort=lastpostdesc
It seems odd to me that the TechNet library feedback forum lives under the MSDN branding, but that seems to be the case.
Don't retire TechNet! -
(Don't give up yet - 12,575+ strong and growing) -
Hello, when trying to insatll itunes on my windows7 pc, I keep getting error occured before installation of itunes was configured. No mdifications have been made to your computer...
Hey AJS4862,
Thanks for the question. If I understand correctly, you are having trouble installing iTunes on Windows. I would recommend that you read this article, it may be able to help you isolate or resolve the issue.
Issues installing iTunes for Windows - Apple Support
Thanks for using Apple Support Communities.
Have a great day,
Mario -
The iTunes Library file cannot be saved. An unknown error occurred (-50). How do I get rid of this error?
Have been able to resolve this issue?... I have just exeperienced it and not happy that I can't resolve it.
-
every time I try to update my macbook air it says an error occurs during installation how do I get the updates to install?
Hi,
Have you activated messages on your settings page?
HW -
tyring to set up an Alumni Email Forwarding Account. They sent me a confirmation email with the link to complete the process. When I "followed" the link, Firefox opens the page and I get the message: An error occured. The URL had a missing or invalid confirmation token.
I'm wondering if maybe my browser settings are the problem and if so, what do I need to change.Does that link have special characters in it that may get corrupted when pasting or passed via DDE?<br />
''(do not post that link on this forum)'' -
My rentall won't play. It says: We could not complete your iTunes Store request. An unknown error occured (-42110). How do I get it to play? I've tried it many different times and it just won't work.
I'd try the following document with that one, susanna:
iTunes Store: Error message 3001, -42110, or 5103 when downloading movie rental -
HT201210 why is there an error occurring when trying to do a software update ios6 on iphone 4s
why is there an error occurring when trying to do a software update ios6 on iphone 4s??
You might find this article helpful: http://support.apple.com/kb/TS3694
It has the error range of 3000's which states
Errors 3000-3999 (3002, 3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the gs.apple.com server on ports 80 or 443. This may be because out-of-date or incorrectly configured security or firewall software is interfering, an old version of iTunes is installed, an entry in your hosts file redirecting requests to gs.apple.com (see error 1004 above), or because of your Internet proxy settings. If you are using a proxy, try without using one or with a known-good network. If that does not resolve the issue, follow iTunes for Windows: Troubleshooting security software issues. Error 3014 may indicate that you need to free up more disk space on the computer before trying to restore again. Error 3194 most likely indicates you do not have the latest version of iTunes installed Update to the latest version of iTunes. -
I keep getting "error occurred while attempting to import file *******. The disc your are attempting to use is full." I have an external hard drive that I moved files over to, but apparently they're also still on my hard drive? HELP!
So you have backed up the content of the computer's hard drive, too?
That usually is a great idea since it is possible to lose use of the system
if parts of it have accidentally been removed or get over-written, or the
main system files get corrupted, when the hard disk drive gets too full.
If you have not trashed the originals of your created content, that remain
after you made copies on an external hard drive or other device, then
that is what you'd have to do to reclaim the capacity still in use by them.
What are specifications of the hard disk drive? The unused capacity
verses the used, in GB? If the hard drive has less than 15 to 20%
free or unused capacity, you could run into trouble. Mine are 40-50%
unused hard drive space, so ample room is available for automatic
Virtual Memory to use that capacity as temporary swap file space.
This is helpful when the computer could use more physical RAM
memory capacity, but doesn't have it. Or if the RAM is maxxed out
and you can't add any more. Virtual Memory is part of OS X and the
system automatically can use as much as is available, but it is better
to be sure there is plenty of resources available to include chip RAM
as well as unused or free hard drive capacity for use as VM.
If for some reason your files in Trash won't go away when you empty
it, you may have to restart. Be sure you have not included any System
files in the content in the Trash, or the Mac may not start up later on.
You may have to boot the computer from the install-restore OS X DVD
and run Repair Disk from its version of Disk Utility, to be sure it's OK.
I'm guessing that by now you know enough about the vintage system
in the older hardware to figure it out, so I won't write about it now.
In any event... hopefully you can simply trash the files, but check them
carefully, & you may need to remove (copy to archive first) even more.
Good luck & happy computing! -
ORA-00604: error occurred at recursive SQL level 1 ORA-12705: invalid or un
Hello, I'm so worried because I can't resolve the following problem with my oracle clients on my desktop.
Initial state:
SO: Windows XP SP1
Oracle clients: Oracle 8i
Issue: I can get connection and access to the DB successfully
Middle state:
SO: Windows XP SP1
Oracle clients: The same Oracle 8i and a new Oracle 9 client.
Issue: We need to swap between each DB 8 and 9 using the HOME SELECTOR to get connections and access. I understand that the Oracle 9 Client have back-compatibility with 8i DBs. If I tray to get connection to the DB 8i using the Oracle 9 we get the following errors.
Errors: ORA-00604: error occurred at recursive SQL level 1
ORA-12705: invalid or unknown NLS parameter value specified
I decided to uninstall all the products (Oracle 8 and 9) using the Oracle Universal Installer. We didn't erase folders nor registers, we just used Oracle Universal Installer. Then we installed Oracle 10g
Final Sate:
SO: Windows XP SP1
Oracle clients: only Oracle 10g
Issue: I can get connection and access to the Oracle 9 DB. But trying with the Oracle 8i DB I got the same problem described above.
Errors: ORA-00604: error occurred at recursive SQL level 1
ORA-12705: invalid or unknown NLS parameter value specified
Please can somebody tell me how can I resolve this problem.
Thanks.
Luis CarlosYou need to check you're NLS environment settings, check out this thread
ORA-12705: invalid or unknown NLS parameter value specified
Maybe you are looking for
-
Can I run XP AND Vista 64 with bootcamp? Or does it only allow dual boot?
Hi Folks. Reinstalling Bootcamp. Want to use Vista 64 for faster Mental Ray rendering on 3dsMax, but I still want to play games on XP. Can I do a triple boot install with Bootcamp? If not can I do an XP install then do a dual boot within my Windows p
-
Hopefully you guys will be able answer something for me... I've been upgraded to the gold package for free () so does this mean that we'll be able to watch films listed in the box office bit for free? I've searched on here and BT's website and I'm no
-
InDesign CS4 vs. PageMaker
I work for an agricultural equipment manufacturer. We are a bit behind on new software because most of what we publish is fairly simple. We primarily use PageMaker for our assembly instruction manuals and FrameMaker for our operator manuals. We prefe
-
How can i use javascript in weblogic jsp
Hai, I know that we can use the jsvascript to validate the html parameters. Is the wblogic jsp support the javascript ?. I tried in weblogic 5.1.0.,the javascript is not working. anybody can help me how to vali
-
Folio not appearing in Adobe Content Viewer on ipad
folio i created in indesign cs5.5 not appearing in Adobe Content Viewer on ipad. I have CS5.5, Apple ipad 1st gen ios 5.0.1 Adobe content viewer 1.9.1 the folio appears on the acrobat.com site in the FOLIO PRODUCER but nothing is appearing on my ipad