Why do I get this result when I use split

Hello guys
I have created a script that looking for the active path,
var myPath = (File($.fileName).parent.parent.parent.fullName);
alert(myPath)
I recieve "/xxxxx/xxxx/xxxx/341542"
the only thing I am interested of in this information it's the number,
so I added on the code
var myPath = (File($.fileName).parent.parent.parent.fullName).split("xxxx/xxxx/xxxx/");
the problem is
I recieve ",341542"
why do I recieve a comma before the number??
there is no comma. in the path.

Laubender,
in my opinion on Mac OSX path.fullname also get the folderpath separated with "/"
Isn't it so?
But back to the problem.
The best way is to use name instead of fullname:
alert(decodeURI(File($.fileName).parent.parent.parent.name))
Otherwise with the match function:
If there are no digits at the end of the path - the result is null and match fails.
I'm with Trevor and Kai Rübsamen: .match(/[\/:]\d+$/) or the split method should be the best in this case.

Similar Messages

TS1702 "The feature you are trying to use is on a network resource that is unabailable" Why am I getting this message when I try to updaate itunes or quicktime?

The feature you are trying to use is on a network resource that is unabailable" Why am I getting this message when I try to updaate itunes or quicktime?

Before trying the update again, use Microsoft's Fix it solution at http://support.microsoft.com/mats/Program_Install_and_Uninstall. Use it to uninstall iTunes and Quicktime. It bypasses this not uncommon problem. When the solution finishes, the selected program will be uninstalled. It can take several minutes and I have seen as much as half an hour.
After iTunes & Quicktime are uninstalled, try the update again.

Why do I get this error when trying to use my bluetooth headset as a listening device? There was an error connecting to your audio device. Make sure it is turned on and in range. The audio portion of the program you were using may have to be restarted.

Why do I get this error when trying to use my bluetooth headset as a listening device? There was an error connecting to your audio device. Make sure it is turned on and in range. The audio portion of the program you were using may have to be restarted.

I may have already resolved this issue buy removing the device from my computer and re-pairing it. It is currently working just fine.

More than maximum 5 filtered album lists trying to register. This will fail,Why i am getting this error when i pick video from Photo library.

I am able to pick 4 videos from the Photo library in my iPhoneAPP but when i try to pick 5th one it throws an error:
"More than maximum 5 filtered album lists trying to register. This will fail,Why i am getting this error when i pick video from Photo library."

Hello Tate r Bulic
I don't have any idea how to remove this error,can i pick more than 5 videos from the photo library...
If it's then please help me and gimme idea..Thanks

Why do I get this message when I try to download Mtn Lion? I have updated all software and am running Lion. "We could not complete your purchase. OS X Mountain Lion is not compatible with this computer.

Why do I get this messge when I try to download Mtn Lion? "We could not complete your purchase. OS X Mountain Lion is not compatible with this computer." I am currently running Lion and have updated all Apps and Software. I have version 10.7.5.

Hi Mtn Mama,
Sounds like your Mac may not be compatible with OSX Mountain Lion. Here is a link with the list of compatible Macs:
http://www.apple.com/osx/specs/
GB

HT201263 Error: source not supported. Why do I get this message when I try to play a video?

Error: source not supported. Why do I get this message when I try to play a video?

Did you copy the songs directly from a CD or did you download the files from a website?
You can use a different player than the Windows Media Player to play the songs if you copied them from a CD to avoid that.

Why do I get this error when I want to run a test using Ant?

Why do I get this error when I run the Ant build file?
Testsuite: JUnit
Tests run: 1, Failures: 0, Errors: 1, Time elapsed: 0 sec
Caused an ERROR
JUnit
java.lang.ClassNotFoundException: JUnit
at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:316)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:280)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:374)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:242)
at org.eclipse.ant.internal.ui.antsupport.EclipseDefaultExecutor.executeTargets(EclipseDefaultExecutor.java:32)
at org.eclipse.ant.internal.ui.antsupport.InternalAntRunner.run(InternalAntRunner.java:423)
at org.eclipse.ant.internal.ui.antsupport.InternalAntRunner.main(InternalAntRunner.java:137)

Abder-Rahman wrote:
In the "XML" file, I was giving the name of the test as JUnit ---> <test name="JUnit">Well, do you have a class called just "JUnit" that contains a test?

Why do I get this message when going on a website The requested URL was rejected. Please consult with your administrator. Your support ID is: 1074107325772756576

why do I get this message when going on a website The requested URL was rejected. Please consult with your administrator. Your support ID is: 1074107325772756576. I have only experienced this while trying to go on the Michael Kors website. How do I stop this from happening?

That's a problem on the web server, not on your computer.

Why do I get This message when trying yo import my pictures?

Why do I get This message when trying yo import my pictures?
The operation couldn’t be completed. (com.apple.ImageCaptureCore error -9912.)
Please help, Thanks

What version of iPhoto are you using and from where (and how) are you trying to import the photos?
As a first fix attempt try this: launch iPhoto with the Option key held down and create a new, test library. Import some photos and see if you get the same message. If you don't then the problem lies with your current library.
OT

Same thing is happening to me. Adobe has not responded to anyone about this error. It appears that Abobe XI is not compatible with IE 11. I do not get this error when I use Chrome or Firefox. Only IE 11 does this. I have tried clearing cache and cookies.

Same thing is happening to me. Adobe has not responded to anyone about this error. It appears that Abobe XI is not compatible with IE 11. I do not get this error when I use Chrome or Firefox. Only IE 11 does this. I have tried clearing cache and cookies. I even uninstalled and re-installed IE 11. It is still doing it. I am surprized that a company like Adobe would just ignore our posts and leave us hanging this this.
Error message is FAILED TO GET DISPATCH FROM IBRWSR2. Then when you click on it the next error message says: PHTML IS NULL. You have to click this error message twice and then the PDF finally loads. Happened every time
Does anyone have a solution since Adobe will not respond?
As a last resort I will try uninstalling the Adobe Reader XI and install Adobe Reader 10 instead. It seems to work ok. But when I try to install version 10 the Adobe site tries to install XI. Any ideas?
JimP08758

It worked just fine for me.
Many site issues can be caused by corrupt cookies or cache.
* Clear the Cache and
* Remove Cookies '''''Warning ! ! '' This will log you out of sites you're logged in to.'''
Type '''about:preferences'''<Enter> in the address bar.
* '''Cookies;''' Select '''Privacy.''' Under '''History,''' select Firefox will '''Use Custom Settings.''' Press the button on the right side called '''Show Cookies.''' Use the search bar to look for the site. Note; There may be more than one entry. Remove '''All''' of them.
* '''Cache;''' Select '''Advanced > Network.''' Across from '''Cached Web Content,''' Press '''Clear Now.'''
If there is still a problem,
'''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
While you are in safe mode;
Type '''about:preferences#advanced'''<Enter> in the address bar.
Under '''Advanced,''' Select '''General.'''
Look for and turn off '''Use Hardware Acceleration'''.
Poke around safe web sites. Are there any problems?
Then restart.

Why i dont get email notifications when someone uses my apple account to know my location through Find my Iphone?

Why i dont get email notifications when someone uses my apple account to know my location through Find my Iphone?

Try adding [email protected] as a VIP contact in your icloud mail app using the appleid used for icloud if using multiple accounts (i.e different itunes and icloud account).
But seriously that happens really !? not getting emails for using icloud services with a valid appleid.

HT201109 Why am I getting this message when I am signed in with the account that I purchased it I don't have another account I'm not sure what's going on here's the message I keep getting my:"To update this application sign into the account you used to pu

I am trying to update my Final Cut Pro X which I have done many times before.
Why am I getting this message now?
--- here's the message I keep getting every time I try to download the update--
"To update this application sign into the account you used to purchase it"
I am signed in with the account that I purchased it I don't have another account I'm not sure what's going on

Open up iTunes. Go to Store. Go to Account and sign in. Click on Purchase History. Find your purchase record.
Good luck
Russ

Can anyone tell me why I'm getting this error when trying to make visibility variables

I have set these up in previous versions of Illustrator. CS and illustrator 10 worked just fine with Variables. Now I can't seem to switch between data sets. I just keep getting this error when I try to switch from one data set to another.

I'll start with the permissions and see if it changes the behavior.

Why am i getting this page when i type in my wesite in the url when i used DW

@charset "utf-8"; body { font: 100%/1.4 Verdana, Arial, Helvetica, sans-serif; background: #4E5869; margin: 0; padding: 0; color: #000; } /* ~~ Element/tag selectors ~~ */ ul, ol, dl { /* Due to variations between browsers, it's best practices to zero padding and margin on lists. For consistency, you can either specify the amounts you want here, or on the list items (LI, DT, DD) they contain. Remember that what you do here will cascade to the .nav list unless you write a more specific selector. */ padding: 0; margin: 0; } h1, h2, h3, h4, h5, h6, p { margin-top: 0; /* removing the top margin gets around an issue where margins can escape from their containing div. The remaining bottom margin will hold it away from any elements that follow. */ padding-right: 15px; padding-left: 15px; /* adding the padding to the sides of the elements within the divs, instead of the divs themselves, gets rid of any box model math. A nested div with side padding can also be used as an alternate method. */ } a img { /* this selector removes the default blue border displayed in some browsers around an image when it is surrounded by a link */ border: none; } /* ~~ Styling for your site's links must remain in this order - including the group of selectors that create the hover effect. ~~ */ a:link { color:#414958; text-decoration: underline; /* unless you style your links to look extremely unique, it's best to provide underlines for quick visual identification */ } a:visited { color: #4E5869; text-decoration: underline; } a:hover, a:active, a:focus { /* this group of selectors will give a keyboard navigator the same hover experience as the person using a mouse. */ text-decoration: none; } /* ~~ this container surrounds all other divs giving them their percentage-based width ~~ */ .container { width: 80%; max-width: 1260px;/* a max-width may be desirable to keep this layout from getting too wide on a large monitor. This keeps line length more readable. IE6 does not respect this declaration. */ min-width: 780px;/* a min-width may be desirable to keep this layout from getting too narrow. This keeps line length more readable in the side columns. IE6 does not respect this declaration. */ background: #FFF; margin: 0 auto; /* the auto value on the sides, coupled with the width, centers the layout. It is not needed if you set the .container's width to 100%. */ } /* ~~ the header is not given a width. It will extend the full width of your layout. It contains an image placeholder that should be replaced with your own linked logo ~~ */ .header { background: #6F7D94; } /* ~~ These are the columns for the layout. ~~ 1) Padding is only placed on the top and/or bottom of the divs. The elements within these divs have padding on their sides. This saves you from any "box model math". Keep in mind, if you add any side padding or border to the div itself, it will be added to the width you define to create the *total* width. You may also choose to remove the padding on the element in the div and place a second div within it with no width and the padding necessary for your design. 2) No margin has been given to the columns since they are all floated. If you must add margin, avoid placing it on the side you're floating toward (for example: a right margin on a div set to float right). Many times, padding can be used instead. For divs where this rule must be broken, you should add a "display:inline" declaration to the div's rule to tame a bug where some versions of Internet Explorer double the margin. 3) Since classes can be used multiple times in a document (and an element can also have multiple classes applied), the columns have been assigned class names instead of IDs. For example, two sidebar divs could be stacked if necessary. These can very easily be changed to IDs if that's your preference, as long as you'll only be using them once per document. 4) If you prefer your nav on the right instead of the left, simply float these columns the opposite direction (all right instead of all left) and they'll render in reverse order. There's no need to move the divs around in the HTML source. */ .sidebar1 { float: left; width: 20%; background: #93A5C4; padding-bottom: 10px; } .content { padding: 10px 0; width: 80%; float: left; } /* ~~ This grouped selector gives the lists in the .content area space ~~ */ .content ul, .content ol { padding: 0 15px 15px 40px; /* this padding mirrors the right padding in the headings and paragraph rule above. Padding was placed on the bottom for space between other elements on the lists and on the left to create the indention. These may be adjusted as you wish. */ } /* ~~ The navigation list styles (can be removed if you choose to use a premade flyout menu like Spry) ~~ */ ul.nav { list-style: none; /* this removes the list marker */ border-top: 1px solid #666; /* this creates the top border for the links - all others are placed using a bottom border on the LI */ margin-bottom: 15px; /* this creates the space between the navigation on the content below */ } ul.nav li { border-bottom: 1px solid #666; /* this creates the button separation */ } ul.nav a, ul.nav a:visited { /* grouping these selectors makes sure that your links retain their button look even after being visited */ padding: 5px 5px 5px 15px; display: block; /* this gives the link block properties causing it to fill the whole LI containing it. This causes the entire area to react to a mouse click. */ text-decoration: none; background: #8090AB; color: #000; } ul.nav a:hover, ul.nav a:active, ul.nav a:focus { /* this changes the background and text color for both mouse and keyboard navigators */ background: #6F7D94; color: #FFF; } /* ~~ The footer ~~ */ .footer { padding: 10px 0; background: #6F7D94; position: relative;/* this gives IE6 hasLayout to properly clear */ clear: both; /* this clear property forces the .container to understand where the columns end and contain them */ } /* ~~ miscellaneous float/clear classes ~~ */ .fltrt { /* this class can be used to float an element right in your page. The floated element must precede the element it should be next to on the page. */ float: right; margin-left: 8px; } .fltlft { /* this class can be used to float an element left in your page. The floated element must precede the element it should be next to on the page. */ float: left; margin-right: 8px; } .clearfloat { /* this class can be placed on a
or empty div as the final element following the last floated div (within the #container) if the #footer is removed or taken out of the #container */ clear:both; height:0; font-size: 1px; line-height: 0px; }

your home page to get into your Web site should be index.html (for Mac) or index.htm (on PC)
You can name it something other than index, but will be harder to find. when you create the subjects and link to them, they can can be named anything with the html extension Or if your using PHP end in .php. There is a Microsoft type asp or aspx but your hosting service has to set up using windows server system.
My hosting service use a Linux server normally but can convert Windows for a Fee. UNIX Linux has no concept of asp or aspx.
See this : https://skitch.com/pjonescet/8mnnx/dreamweaver

Why do I get this error when specifying a parameter from the URL?

Hello,
I am trying to "install" a parameter in a page, so that it's value can be specified in the URL and a VO updated according to this value.
Here's is the page definition file, with an executable and a binding to a method call:
<executables>
<invokeAction Binds="prepareMainMenuView1" id="invokeQuery"
Refresh="prepareModel"/>
</executables>
<methodAction id="prepareMainMenuView1"
InstanceName="AppModuleDataControl.dataProvider"
DataControl="AppModuleDataControl" RequiresUpdateModel="true"
Action="invokeMethod" MethodName="prepareMainMenuView1"
IsViewObjectMethod="true">
<NamedData NDName="param" NDValue="#{param.root_menu}"
NDType="java.lang.String"/>
</methodAction>
if I run the MyMenu application with:
http://127.0.0.1:7101/MyMenu-ViewController-context-root/faces/menu?root_menu=anything
then I get this exception:
ADF: Adding the following JSF error message: String index out of range: -1
java.lang.StringIndexOutOfBoundsException: String index out of range: -1
Do you know why? Where do I fail?
I followed the isntruction here:
http://www.jasonsdevelopercorner.com/?p=65
So far I have not been able to read a parameter in a way, do you have any example on how can I use parameters from URL from within a single page in an unbounded task flow?
I worked all the day on this, but with no luck.
Thanks

I solved the problem. The invoked method was not part of the VO, but was part of the AM.

Why do I get this result when I use split

Similar Messages

Maybe you are looking for