Why do I need to login to hang up a call?

If I'm talking on a call for more than 3 minutes (my auto-lock settings), my phone locks. When I want to hang up the call, I have to login and then I can click End Call (or whatever the button says).
Is there a way to hang up a call without loging in first? Or is there a setting that doesn't auto-lock when I'm on the phone? SUPER ANNOYING!

I'm not sure. I have a 5S and use the Touch ID. I've used the device with a Bluetooth, but hung up from that. I've used it on a speakerphone conversation, a long one and then reached over, touched the screen, it was still on the call screen and touched End Call. The same with calls holding it to my ear. Something is different, but I'm not sure what. I'm not sure there is nothing wrong with the sensor, but if you believe their isn't, then that is your choice. Good luck.

Similar Messages

Why do I need to login thousands time to add an event in webmaker events?

I tried this everytime but I need to login infinity times to add an event in webmaker events.Sometimes luckily it lets me add events.
Please fix this

Its a Known bug, please see the link
https://bugzilla.mozilla.org/show_bug.cgi?id=926964
comment about your problem there and how you are able to generate the problem again and again.

Why does CC need my login every time I launch a CC program?

On my Windows 7 64 bit system with some CS6 and CC programs and running from an administrator account with UAC set at "never notify" I'm being asked for my login just about every time I launch any CC program.
This is has been slowly getting. This is not following any system change, new CC install or any other system change or crash I'm aware of.
I know others have had this problem but if there is a definitive fix available I can't find it.
Is there a fix?
I'll leave the obligatory complaints about how annoying this is out but be assured, they're there!
Thanks,
Tom

Sync unfortunately is known to sometimes corrupt or duplicate bookmarks. I had hoped it may have been fixed with the New Sync but apparently not.
* Bug [https://bugzilla.mozilla.org/show_bug.cgi?id=812348 812348] - Firefox Sync duplicating and scrambling bookmarks & folders
*Please only vote or follow . Do not add comments unless it is brand new information, or it is something asked for in the bug.
** https://bugzilla.mozilla.org/page.cgi?id=voting.html
**https://bugzilla.mozilla.org/page.cgi?id=etiquette.html
** Follow by using CC <br />You are able to follow the bugs by using the [Save] option whilst the []CC option is checked.
** Note you need an email address to register with bugzilla and that will be made public
Update
In fact this bug comment specifically may be of interest
* [https://bugzilla.mozilla.org/show_bug.cgi?id=812348#c32 bug 812348#c32]
''If you have lots of bookmarks, or a flaky network connection, or add/change bookmarks frequently, then you're at increased risk of seeing corruption, and there's not much you can do about it. I recommend not using bookmark sync if it's a problem for you.''

Why do we need a Self Reference "me" to use the components of a class

Hi
I am not clear why do we need a self reference variable "me" to call the components of its own class? when it can be accessed directly as in the following examples?
In my first example below i can call the method display_name directly without creating a reference object or instance of the class within the class.
In the second example i am using the self refernce Write me->name to access the component of a class.
My question is why do we need "me" when i can use the components directly as shown in my first example.
CLASS egocentric DEFINITION.
PUBLIC SECTION.
    DATA:
     name(10) TYPE c READ-ONLY.
    METHODS set_name.
    METHODS display_name.
ENDCLASS.                    "egocentric DEFINITION
*       CLASS egocentric IMPLEMENTATION
CLASS egocentric IMPLEMENTATION.
METHOD set_name.
    MOVE 'Abap Objects' TO name.
    CALL method display_name.
ENDMETHOD.                    "write_name
METHOD display_name.
    write: name.
ENDMETHOD.                    "display_name
ENDCLASS.                    "egocentric IMPLEMENTATION
*Global Data
DATA oref TYPE REF TO egocentric.
START-OF-SELECTION.
CREATE OBJECT oref.
CALL METHOD oref->set_name.
CLASS egocentric DEFINITION.
        PUBLIC SECTION.
            DATA:
             name(10) TYPE c VALUE u2018Instructoru2019
READ-ONLY.
             METHODS write_name.
ENDCLASS.
CLASS egocentric IMPLEMENTATION.
        METHOD write_name.
            WRITE me->name.
        ENDMETHOD.
ENDCLASS.
*Global Data
DATA oref TYPE REF TO egocentric.
START-OF-SELECTION.
        CREATE OBJECT oref.
        CALL METHOD oref->write_name.

You can go WIKI and search with ABAP Objects.
Or do the same in 'advanced search' and select a search area. You are bound to find something.
Or this link perhaps:
[abap objects|http://help.sap.com/saphelp_nw70/helpdata/EN/ce/b518b6513611d194a50000e8353423/content.htm]

Why do I need to start up Screen Sharing twice to get it to work ?

I have an Intel Mac Mini connected to my TV, so I started using Screen Sharing from my MacBook Pro to be able to work on it when others were watching TV.
Both Macs used to have OSX 10.5 Leopard, and everything worked fine.
Now they both have OSX 10.6 Snow Leopard, and whenever I startup Screen Sharing, the connection-windows asking for my Name & Password comes up properly, but then it hangs... it stays in "Connecting..." for ever (litteraly).
I'm not able to quit or force-quit the connection-window by then, so it stays in view...
(Screen Sharing isn't even listed in the force-quit list as a running app)
but...
when I just try Screen Sharing again, I get connection immediately and it seems to work flawlessly...
...it's just that the connection-window is impossible to quit...
it stays in view an is really annoying...
this looks really crappy...
can anyone tell me why I do need to startup Screen Sharing twice to get it to work ?
Is this a bug ?
(If so : please apple fix this a.s.a.p.)
...or am I doing something wrong ?
(if so : what am I doing wrong ? and how can I get rid of this annoying screen ?)
Thank you for your kind reply.
Toon.B

it's October and this really annoying problem still exists !
the unnamed screensharing-loginwindow keeps "Connecting...", and I'm unable to shut it down...
...even after my screen sharing session is over
...even force-quitting is impossible (this 'app' just isn't showing up in the force-quit-window...)
please Apple - fix this ; under 10.5 it was working great !
Does anyone have any idea how to fix this ?
(besides restarting my Mac)
Thanks !
Toon.B

What am I doing wrong with the isNew() method? and why do I need the other methods?

I have coded an include jsp like this.
          <%@page language="Java"%>
          <%@page import="javax.servlet.http.HttpSession"%>
          <%!
          String iContextPath;
          String iCommonPath;
          String iImagesPath;
          %>
          <%
          iContextPath = request.getContextPath();
          iCommonPath = iContextPath + "/common";
          iImagesPath = iCommonPath + "/images";
          System.err.println(" here ");
          HttpSession thisSession = request.getSession( false );
          if( thisSession.isNew() ){
          System.err.println("isnew");
          response.sendRedirect( iContextPath + "/common/login.jsp" );
          %>
          Now I also have a redirect.jsp in the root of an application that contains
          this.
          <html>
          <body>
          <%
          System.err.println("Redirecting at this time from the root");
          response.sendRedirect( request.getContextPath() + "/secureArea/");
          %>
          </body>
          </html>
          And I have a logout.java servlet that looks like this.
          package com.pch.epics;
          import java.io.IOException;
          import javax.servlet.ServletException;
          import javax.servlet.http.HttpServlet;
          import javax.servlet.http.HttpServletRequest;
          import javax.servlet.http.HttpServletResponse;
          import weblogic.servlet.security.ServletAuthentication;
          public class Logout extends HttpServlet{
          private static final String CONTENT_TYPE = "text/html";
          //Initialize global variables
          public void init() throws ServletException{
          //Process the HTTP Get request
          public void doGet( HttpServletRequest request, HttpServletResponse
          response ) throws ServletException, IOException{
          String username = "";
          if( request.getUserPrincipal() == null ){
          username = "Unknown";
          } else {
          username = request.getUserPrincipal().getName();
          System.err.println( "ePics logging out '" + username + "'" );
          request.getSession( false ).invalidate();
          ServletAuthentication.logout( request );
          ServletAuthentication.invalidateAll( request );
          ServletAuthentication.killCookie( request );
          response.sendRedirect( request.getContextPath() );
          //Process the HTTP Post request
          public void doPost( HttpServletRequest request, HttpServletResponse
          response ) throws ServletException, IOException{
          doGet( request, response );
          //Clean up resources
          public void destroy(){
          First of all, why won't the isNew() report a new session in the server log?
          EVERY request coming in says it's an old request (ie it's not new). The
          J2EE Applications and BEA WebLogic Server book from BEA says this should
          work.
          My second question is why do I need to do those three lines from
          ServletAuthentication to logout a user? Ok, maybe I'm from the MS world,
          but that seems excessive, especially since I've already done a
          session.invalidate() right before it, but the bea docs say I'm required to
          do all four!


When you invalidate a session. You invalidate the session of the web
          application that your jsp/servlet is part of. It is possible to have more
          than one web application on WLS and have them share a authentication info.
          While these applications share authentication they do not share their
          sessions so because of that calling session invalidate does not kill all the
          sessions. ServletAuthentication is needed to kill all the sessions and do a
          complete logout from WLS.
          "Flip" <[remove][email protected]> wrote in message
          news:[email protected]...
          > I have coded an include jsp like this.
          >
          > <%@page language="Java"%>
          > <%@page import="javax.servlet.http.HttpSession"%>
          > <%!
          > String iContextPath;
          > String iCommonPath;
          > String iImagesPath;
          > %>
          > <%
          > iContextPath = request.getContextPath();
          > iCommonPath = iContextPath + "/common";
          > iImagesPath = iCommonPath + "/images";
          >
          > System.err.println(" here ");
          > HttpSession thisSession = request.getSession( false );
          > if( thisSession.isNew() ){
          > System.err.println("isnew");
          > response.sendRedirect( iContextPath + "/common/login.jsp" );
          > }
          >
          > %>
          >
          > Now I also have a redirect.jsp in the root of an application that contains
          > this.
          > <html>
          > <body>
          > <%
          > System.err.println("Redirecting at this time from the root");
          > response.sendRedirect( request.getContextPath() + "/secureArea/");
          > %>
          > </body>
          > </html>
          >
          > And I have a logout.java servlet that looks like this.
          > package com.pch.epics;
          >
          > import java.io.IOException;
          > import javax.servlet.ServletException;
          > import javax.servlet.http.HttpServlet;
          > import javax.servlet.http.HttpServletRequest;
          > import javax.servlet.http.HttpServletResponse;
          > import weblogic.servlet.security.ServletAuthentication;
          >
          > public class Logout extends HttpServlet{
          > private static final String CONTENT_TYPE = "text/html";
          > //Initialize global variables
          > public void init() throws ServletException{
          > }
          >
          > //Process the HTTP Get request
          > public void doGet( HttpServletRequest request, HttpServletResponse
          > response ) throws ServletException, IOException{
          > String username = "";
          > if( request.getUserPrincipal() == null ){
          > username = "Unknown";
          > } else {
          > username = request.getUserPrincipal().getName();
          > }
          > System.err.println( "ePics logging out '" + username + "'" );
          > request.getSession( false ).invalidate();
          > ServletAuthentication.logout( request );
          > ServletAuthentication.invalidateAll( request );
          > ServletAuthentication.killCookie( request );
          > response.sendRedirect( request.getContextPath() );
          > }
          >
          > //Process the HTTP Post request
          > public void doPost( HttpServletRequest request, HttpServletResponse
          > response ) throws ServletException, IOException{
          > doGet( request, response );
          > }
          >
          > //Clean up resources
          > public void destroy(){
          > }
          > }
          >
          > First of all, why won't the isNew() report a new session in the server
          log?
          > EVERY request coming in says it's an old request (ie it's not new). The
          > J2EE Applications and BEA WebLogic Server book from BEA says this should
          > work.
          >
          > My second question is why do I need to do those three lines from
          > ServletAuthentication to logout a user? Ok, maybe I'm from the MS world,
          > but that seems excessive, especially since I've already done a
          > session.invalidate() right before it, but the bea docs say I'm required to
          > do all four!
          >
          >
          >

Creative cloud shows CC and CC (2014), if i try running (2014) I get an error that I need to login.

I have adobe Creative cloud and it shows CC and CC (2014) for every program, if i try running (2014) I get an error that I need to login.
When I look at my adobe subscription it says Creative Cloud Free membership but I pay 49.95 a month for full access.
Why am I not able to use CC(2014).
If I pay the 49 monthly should I not get upgrades to all my apps instantly?
Please help

You will see my monthly payment to Adobe and the reference for the payment.
Hi Kartikay,
I have been using my creative cloud for months with my email address [email protected] I am surprised you do not see it.
What can I do?
When I login all my programs open correctly except premiere cc 2014

Why do I need a hardwire for my WRVS4400N wireless router?

I am not very technically inclined. Plug and play is my way. So when I got my first router (a linksys) i plugged in the ethernet cables and voila!-----internet access as well as connectivity for my xbox 360, ps3 and Wii. The people rejoiced.
Times change. I was happy with my last Linksys hard-wired router, so when I finally got tired of all the wires laying around I went Linksys wireless. BEST BUY told me the best wireless/hardwire router around is the WRVS4400N. With this router I can have my 2 360's wireless as well as my pc. The Wii and PS3 along with my wife's computer are hardwired. There is also a hardwire going from the router to the Comcast cable modem. Plug and play this, that and the other thing and voila!-----internet and gaming galore! Once again, the people rejoiced.
That is, until, I decided to make my wife's computer wireless. The people rebelled. Once my wife's pc went wireless (like my two 360's and pc), I lost all connectivity. No logging on to the playstation network, XBOX live, Wii surfing, and no internet access. After many hours of turning off this, resetting that and plugging/unplugging the other thing, we finally figured out how to keep the people happy--one of the pc's has to be hard-wired to allow everything else to work (internet access, gaming, etc.).
So the people are happy, but the king is not as his kingdom is bound by the tyranny of one ethernet cable. Not to mention the fact that his wireless signal is unsecured.
This makes no sense to me. Why do I need one of the pc's to be hard-wired just to get everything else to work?

Trying to download firmware from this go_____ed company is like trying to pull teeth! I mean, w_f?! Are they trying to lose customers?
I found answer ID 4030 and under step 2 it told me "to go to the Linksys download page, click here and verify the model and version number of your Linksys product." I clicked on the link and that took me to "Support and Services." I entered my model number where appropriate and that took me to some kind of small business section! Small business?!?!? I'm a bloody home user, not some f____ng businessman!!!!!
Anyway, I click on this link: Cisco Small Business (Linksys Business Series) software and firmware downloads (I know it says Small business, but where else was I supposed to go? I mean, this is where Support and Services sent me). That link took me to Support>Download Software.
Under "Support>Download Software>Select a Software Product Category" I clicked on the Router Software link (which had a padlock icon next to it). They wanted me to login again. So I try, but I keep getting repeated (and erroneous) login errors telling me I entered my username and password incorrectly. I checked my username and password many times. No problems with my username or password. Thus, a dead end there.
I went to the "Support>Download Software>Software Search" and entered the model number of my router. I clicked on this link: Download Software for Cisco WRVS4400N Wireless-N Gigabit Security Router - VPN V1.0 & V1.1 : wrvs440.... Guess what? They wanted me to login AGAIN!!!!! So I try, but I get the same login error messages I got before!!!!! Je___ _______ ____st! Another dead end!
I am at my wits end here. Getting some kind of firmware for my router to work properly should not be this f____ng difficult! I don't even know how to access my router's web user interface!
Any other suggestions before I finally say goodbye to Linksys/CISCO? Because I mean after this b______t experience, the next time I need some type of router or modem or something along those lines, I'm gonna think twice about going to Linksys/CISCO.
P.S. Sorry about my edited language, but if you had to go through what I did, I believe you'd be just as frustrated as I am. I spent around $250.00 for this router and it doesn't even work right!!!!!
Message Edited by JohnJr on 04-02-2009 10:07 PM
Message Edited by JohnJr on 04-02-2009 10:08 PM

Why do we need to Restart XI Production server frequently ?

Hi Friends,
                We have faced issue like Timeout , deadloack in JDBC Adapter and many issues . If we restart the XIPRD once the problem get solved .
            <b> 1.   Can you please suggest why do we need to restart teh XI Server ?
              2. In what way it will be helpful for us ?
               3. Will it clear any locks ? or any dump files ?
               4. Is it recommended to star t and stop the sever ?</b>
                          Can you please give valuable replies as why should we restart the xi sevrer in particular period like once in a month like that
Regards.,
Shyam.S

1. Can you please suggest why do we need to restart teh XI Server ?
It is not done on the frequent basis until you fae some problems like file adapter not appearing in the adapter configuration.....none of the adaters are present in ID (EX)
it will only start the servicess or other things which were hanging or not responding state.....
2. In what way it will be helpful for us ?
ot moght e helpfull some times but not always...it depends on the probelm you are facing...lot of problems can be solved without restarting the server
3. Will it clear any locks ? or any dump files ?
   Not sure
4. Is it recommended to star t and stop the sever ?
Not recomded to do it frequenlty without any valid reason (until you apply some patches etc)

Why do we need to take a lock before invoking wait()/notify() on an Objec

Hi,
Why do we need to take a lock before invoking wait()/notify() on an Object? i know that we shud take otherwise illegalstateexception is thrown.
what is the reason to take a lock bfefore invoking the above methods. why does jvm expects from the programmer?
Cheers,
duggana.

Well, very often a wait or notify is conditional on the state of some flag (semaphore) which is protected by the monitor. By putting the wait in a synchronized section you guarantee that the sempaphore won't change between the final test of it and the actual wait or notify, otherwise a notify might be lost and the program hang.
// wait on semaphor
if (!canProcede)
   synchronized(this)
       if(!canProcede)
          wait();
//   release semaphor
synchronized(this)
     if(!canProceed) {
          canProede = true;
          notify();
    }If the wait above wasn't guarded by the sychrozined it's possible the second code fragment might be executed between the test and the wait, in which case the wait would be called after the notify and, hence, wait for ever.

Why do we need aaa authentication enable

Hi all
Why do we need the " aaa authentication enable default group tacacs+ enable" . Is " aaa authentication login default group tacacs+ enable"
is not enough ?
aaa authentication login default group tacacs+ enable
aaa authentication enable default group tacacs+ enable
Thanks

Hi jatin ,
Just for clariffication , if i add " aaa authentication enable default group tacacs+ enable" , once authenticated device will go directly to enable mode .
As you said
aaa authentication login default group tacacs+ local
in case tacacs failed user has to enter local username and password . once it is authenticated
" aaa authentication enable default group tacacs+ enable " will be executed and the user have to enter the enable (local db ) secret .
Please correct me if iam wrong
aaa authentication login default group tacacs+ enable
aaa authentication enable default group tacacs+ enable
aaa authorization console
aaa authorization exec default group tacacs+ if-authenticated
aaa authorization commands 15 default group tacacs+ if-authenticated
aaa accounting exec default start-stop group tacacs+
aaa accounting commands 15 default start-stop group tacacs+
aaa accounting connection default start-stop group tacacs+

Archiving cds and why do i need id3 tags

here comes another one of those questions looking at which codec to use to store music.....i also have tag questions.....
i'm about to (re-)rip my cd collection and looking at some info re codecs and id3 tags
now.....i believe i understand the benefits of alac (lower file sizes, keeping id3 tags, lossless compression) v wav(no compression)
however (and for some out there) if we just entertain the fact that wav may have some minute benefit for me depending on my questions and answers given.....and yes i know wav and alac will sound the same to the human ear - i accept that as a given of lossless compression ......
points i'd like to outline:
i am looking to rip my cds, firstly and mostly, for an archiving purpose!! purpose numero uno!!
i could well want to re-create cds with these archived records in the future
size of files is of no concern to me at all
i'm using a mac nowadays
i will convert most of these files, where needed, to use with a portable music player (i'm not bothered with having, say a wav file and then also converting and having an alac file, as crazy as that sounds)
this is where i ask for info re the benefits of embedded tags that are found in alac:
are these tags that important?
where do they come into play in ripping and later converting music?
are these uses just bells and whistles that have no benefit to my needs?
if i rip cds to wav (or aiff), say, using itunes, will cd info and track listings be available on the downloading database (eg itunes) to name these wav files?
if i then ensure these song files are kept under the album's folder, have i just done what tags do? surely not. that is all i have needed in the past.
this is where i feel i may be really missing what id tags (can) do
are tags more than just managing song files and where they belong and where they have come from?
is it just a convenience of not personally managing your song files (as per previous paragraph)?
(in the past i had ripped cds to mp3 codec. i think i used "cd rip" or something like that on my pc.
my mp3 files were individually named and sorted and kept under album folders under artist name folders.
apart form the very odd occasion all track and album info i needed was found on a database that was attached to the ripping software.
i never had a problem managing/maintaining these files and folders.)
i welcome some enlightenment on some of my questions above and other info that may be relevant
and yes, i understand that music will sound the same as a wav file or alac file - but humour me re using wav and tell me why i need id3 tags
i guess the crux of it is:
why do i need id3 tags?
does my managing of my song file in the album folder do what tags do?
what problems/shortcomings/headaches may i encounter by not having those tags if i use wav as opposed to alac?
what do i not know about these little buggers?
what codec is best for my purpose of archiving and re creating of cds (for playing in cd players)
thanks in advance for your input and any clarity that i may experience through this
peter t
excuse my long windedness (i have spent some time editing this entry)

Crows2012 wrote:
as mentioned earlier if i just have songs (wav) in album folders, when i import these albums into itunes, do you know if these will come up under AN album with their file names purely using my filename setup (but with no artwork)?
Yes, iTunes will read the filename, such as "Track 1" or something else and display it. But nothing else. No Album or Artist.
so the tracks will remain grouped as an album based on their initial folder and the albums and tracks as per file name?
Crows2012 wrote:
also, does aiff have limitations (apart from the full size of the file)?
I'm not sure I understand what you mean. For all practical purposes AIFF and WAV are exactly the same thing. They're just file containers.
i thought that i had read somewhere that aiff tags could run into some issues with its tags - ie may not always be transferred 100% accurately with certain players (or hardware maybe)
Crows2012 wrote:
and how do these codecs work re-creating an album for the purposes of playing in a cd player? - this is a crucial question for the purpose of my archiving/backup of CDs THEMSELVES
That's actually going to depend on what burning software you use. Once you rip the tracks to whatever file container you choose (WAV/AIFF/ALAC) you'll never really exactly re-create the album. But for archiving purposes all three file containers will do what you want, which is to create a lossless archive. AIFF has the advantage of supporting embedded ID3, which ALAC has the additional advantage of the files also being about half the size of AIFF/WAV files.
i was thinking that maybe wav was able to recreate an album (in effect duplicate one) if my cd was lost or damaged in the future. i was thinking this IF when ripping to wav everything is unchanged (unless there is other data on the original cd). and maybe only possible with wav. the purpose for this would be to play recreated cds on my cd player
any idea on this one?
(i havent looked too thoroughly on this angle but i'll keep googling on this one)
much appreciate all info thus far
peter t

I want to know that if i want to download facebook on my iphone 4 or any other apps then it ask me put my card details for payment. why is that. if they are free then why do i need to give my card details?please help me anyone.

I want to know that if i want to download facebook on my iphone 4 or any other apps then it ask me put my card details for payment. why is that. if they are free then why do i need to give my card details?please help me anyone.

Just select no credit card as outlined here:
http://support.apple.com/kb/ht2534

TS5325 I have already purchased all the instruments but my app is saying they are not available. I have clicked already purchased but it says I need to login as original user???? Any ideas.

I have already purchased the full set of GarageBand instruments but the app is no longer recognising this. I have clicked on already purchased as it suggests in troubleshooting however it then says it can't install because I need to login as the original user??? Please help.

Are you signed into the AppStore with the same Apple ID you used when you originally bought GarageBand and the in-app purchase? If yes, then contact the iTunes Store, see:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase

Why when I try to login the Itunes Connect with my Apple ID it always says: "Apple ID does not have permission to access iTunes Connect."?

Why when I try to login the Itunes Connect with my Apple ID it always says: "Apple ID does not have permission to access iTunes Connect."?

Look on one of your bank statements and be sure to enter the billing address exactly as it shows on the statement. Some folks forget where they actually get the statement. They put their home address in iTunes/Mac App Store and they actually get the statement at their place of employment or vice versa.

Why do I need to login to hang up a call?

Similar Messages

Maybe you are looking for