Why does my Epson 3800 printer not print to scale?

I have designed a cover for a brochure in Illustrator CS4 that I intend to print at home. This cover has a mixture of colour graphics and mono text. The mono text prints more clearly on my HP LaserJet 2200 than my Epson 3800 inkjet printer so I intend to run my covers through the laser printer first for the mono text and then through the inkjet printer for all the colour items.
I did this for last year's brochure cover without any apparent problems but my latest design is highlighting the fact that the laser printer is placing items on the page more accurately than my inkjet paper - which results in some misalignment. My Epson 3800 appears to be slightly expanding my Illustrator page layout even though I have selected the 'Do Not Scale' option in the Illustrator Print dialogue box. A measurement between two items in my Illustrator design is 278 mm. The same dimension on the printed page is 284 mm, i.e. 6 mm wider, which is a non-trivial error.
Can anyone provide an explanation and/or solution for this behaviour?
David

Hi Harron,
Thanks for a rapid and accurate answer. The borderless option was indeed the culprit.
Your reply was also very useful in alerting me to the existence of the 'Retain Size' option under Expansion. I'd never seen that before, despite owning my Epson 3800 for over two years! Of course, I could have read the manual ....
The human brain is a puzzling thing. I don't think I'm stupid but I'd always ruled out the use of full bleed items in any of my amateur graphic design work as I didn't fancy printing everything on A3 just to cut it down to A4 (I use folded A4 to create an A5 brochure). I totally forgot my inkjet printer's capability to make borderless photographic prints. It's as if my brain was divided into a graphic arts compartment and a photographic compartment.
Quite by accident, your comments have made both halves of my brain talk to one another and now my cover design benefits from the use of full bleed. I can't thank you enough!
David

Similar Messages

Just purchased a office jet 6500A Plus so that I can print from my iPhone and iPad. I can print form my iPhone but my iPad 2 tells me there is no air printer available. Why does one device recognize the air printer but the other device does not?

Just purchased a office jet 6500A Plus so that I can print from my iPhone and iPad. I can print form my iPhone but my iPad 2 tells me there is no air printer available. Why does one device recognize the air printer but the other device does not?

I have the 6500A without plus and it is with a LAN cable connected with my Router.
First make sure you have the latest printer firmware installed.
Next restart the printer and the Router.
I had the same. Problem but it went away after rebooting the Router.

Why is part of a border not printing - it shows up on my file?

Why is part of a board not printing It shows up in my preview. It is the right side border.

Toolbar > View > Thumbnails > click on any thumbnail > Right Side Panel > Document > Document Margins
If you are trying to make the overall graphic of the certificate smaller, click on the image and you should see corner handles, drag those in holding down the Shift key (to keep the proportions constant).
Peter

My Epson 3880 will not print decent prints.

I have a macbook pro I updated to Lion 10.7.4 and now my epson 3880 will not print decent prints! Worked fine before but I cannot load profiles ofr paper now and therefore cannot get quality prints now! I am an artist and this is a large part of my business is there an answer for this issue?
<Re-Titled by Host>

Welcome myazel!
myazel wrote:
... I cannot load profiles ofr paper now ... is there an answer for this issue?
I downloaded a dmg file containing Epson ICC profiles . After running the installer, I found the path to the profiles is
HD/Library/ColorSync/Profiles/EPSON Stylus Pro 3880/
HTH

Why does an image size 6x6 240 print out 6.25x6.25 when I drag it into a new file 24x7 240? When I print it before I drag it into the new file it prints out 6x6.

Why does an image size 6x6 240 print out 6.25x6.25 when I drag it into a new file 24x7 240 image size? If I print it before I drag it into the 24x7 240 file it prints 6x6.

What is the number 240 meant to indicate here – the resolution? If so please also give the unit.
And what are your printer and the print settings you use, could there be any scaling involved in the printing itself?

Printer not printing AND Matching Screen colors to Print colors. Any advice is apreciated!!

Hello - I have 2 questions regarding printing to an Epson and also regarding the monitor colors Not matching the print colors working from Photoshop CS4 on a Mac with a Maverick [ 10.9.3 ] OS. My issues are Not about my own printers or software. I have been tutoring a friend via phone in Photoshop; he has CS4 and is working on Mac OS 10.9.3.
1- We found that he could print nearly fine [ nearly accurate colors ] from Lightroom on his computer, version 5.4. But when he tries to print from Photoshop he cannot make a print. There is clear communication between the computer and the printer, as, when he sent the file to print, the printer [ an Epson 3880 ] responded by automatically changing to Photo Black from Matte. Then, it opens the rollers as if to print, but, it them stops and the menu [ on the Printer ] says 'Ready.' The paper is 4x6” Moab Lasal paper 300gsm. This issue of Not printing is only with this Moab Lasal luster paper, for which he Does have the IIC profile, and we always make sure ‘Photoshop manages colors,’ not the printer. To address the issue of the printer Not printing at all using a non-Epson brand paper, we have tried seemingly everything from deleting and re-adding the printer from the Library / Printers, resetting everything [ printer computer software etc ], trying different settings in the Printer window and the Print Settings window. Including changing the media profile, platen gap, etc.
2- My other and more important question is – after we Do get a print, we cannot match the monitor color to the print. [ We havE been able to get a print using Epson brand paper. Which is odd because we have the ICC profiles for both papers ]. To address the color matching issue, he has told me he calibrated the monitor with a Spyder, and here are a few other variables that I can relay that may or may not be affecting his color-issues:
He iS viewing his prints in a dayliglht-rated lighting environment
The monitor is an iMac glossy finish monitor, not an anti-glare
We tried working and printing from both an 8-bit and also a 16-bit color-space and also 16-bit printing
The color shift is slightly but noticeably toward Magenta.
His printer is Not calibrated
Please let me know what else we can do, any known glitches that may be an issue with his older version of CS, any tips you can suggest.
Thanks very much!

I don't have that printer and I'm not on Mac, so someone else has to step in there. Generally a green/magenta cast indicates none/double printer color management. But then I don't know what you mean by "slight".
The Spyders aren't the most consistent and reliable calibrators out there. I had a Spyder 3 sensor that I just threw away because it gave a distinct red cast (I have several other calibrators, so there was no doubt). Another potential problem is that with most calibrators you can only adjust the white point along the blue/yellow Kelvin scale, but not on the green/magenta scale. This is often necessary to get a good white point color. In this case you need to use the monitor's OSD controls, and if possible the "pre-calibration" function in the calibrator to measure and monitor it - if that function exists. And I don't know if this is possible with an iMac.
This is basically a question of getting the white point right, both on the blue/yellow and the green/magenta axis (and luminance of course). The goal is to get a visual match to paper white on screen. With the white point properly set, neutral color balance relates to that, and the rest more or less follows by itself. (In addition you should set the proper black point/contrast for full control, but that's not the issue here).

Why does Safari 5.1.7 not display pdf files anymore?

Why does Safari 5.1.7 not display pdf files anymore? Please fix!

I have this problem too except I see the pdf but it does not print.

6510 all in one photosmart printer - not printing black and/or not at all after 7/22/15 update....

Printer not printing in black at all, poor color print since 7/22/15. I have downloaded drivers and software, hard reset the printer (power cord out and unplugged then plugged all back in), read all the forums, watched youtube videos, called friends, googled answers, bought new ink (waste of money), cleaned print head multiple times, did every step on every forum post to no avail... Bought a new printer but really would rather return it and get my money back after getting this printer up and running again- why because I think the problem is due to HP and the new update released 7/22/15! I'm very upset, I have spent countless hours attempting to fix this printer (which I really do love up until now). I have lost credit on school assignments due to printing issues, wasted money on ink (that is really expensive) and wasted the ink trying to fix it running test page after test page. I feel like this is not fair to the consumer and I am very upset. I am ready to throw this thing in the street and smash it to pieces with a baseball bat at this point. I really would rather fix it but apparently this is the only way to contact someone. I have had this printer for 3 years and do not think I need to replace it or spend money to call someone from HP to fix it nor do I feel like I need to have it "serviced", nor do I wish to waste any futher time or money on the expensive ink this printer requires.

Hi there ,
I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact.
Additionally, keep in mind not to publicly post serial numbers and case details.
If you are unfamiliar with how the Forum's private message capability works, this post has instructions
Regards,

Why does the new operating system not delete the moved files from their original location - it seems like an enormous waste of space, time and effort to clean up every file once you've moved it

Why does the new operating system not delete the moved files from their original locations - it seems like an enormous waste of space, time and effort to clean up every file once you've moved it - also, when transferring large amounts of files it becomes a very large problem remembering which files were transferred and which not.

You're going to need to be more specific, as I'm not quite sure I understand what you're talking about.
If you're referring to copying from an external hard drive or flash drive, and you want to actually move files rather than copy them, you can hold down the option key to force it to do a "move" rather than a "copy." This is not new behavior, though... the Mac OS has worked this way as long as I can recall (and I've been using it since 1984).
If you're having a problem with trying to move files from one place to another on a single drive causing them to be copied instead, that is likely because of some permissions issue preventing you from actually being able to move them.

Why does iPhoto 9.4.3 not recognise RAW files from a Pentax K3 camera?

Why does iPhoto 9.4.3 not recognise RAW files from a Pentax K3 camera? It does from a K7.

Because it requires Mavericks - http://support.apple.com/kb/ht5955
OS X Mavericks provides system-level support for digital camera RAW formats from the following cameras.
Supported by Digital Camera RAW Compatibility Update 5.04*
Fujifilm X-E2
Fujifilm X-T1
Nikon D3300
Nikon 1 AW1
Panasonic LUMIX DMC-GM1
Pentax K-3
LN

Why does iPhoto (9.0/11) not retain the Event name when exporting more than one event? (using File - Export - Album name with number).

Why does iPhoto (9.0/11) not retain the Event name when exporting more than one event? (using File -> Export -> Album name with number).
Exporting a single Event retains the Event name which is what I'd expect. But highlighting more than one event and exporting it renames the images to Events 001.JPG, Event 002.JPG etc.
I was recently on holidays and had all my events nicely split on Dad's computer but when I went to export it I couldn't retain any of this information. Now I have to replicate this all again on my computer.
It wasn't possible to export the entire library as the external drive was fat32 format an I didn't want all of it. It would be nice to export a bunch of events to someone and have it retain the name.
Does anyone have a work around or will this be fixed at some point by Apple?

Why does iPhoto (9.0/11) not retain the Event name when exporting more than one event? (using File -> Export -> Album name with number).
Exporting a single Event retains the Event name which is what I'd expect. But highlighting more than one event and exporting it renames the images to Events 001.JPG, Event 002.JPG etc.
I was recently on holidays and had all my events nicely split on Dad's computer but when I went to export it I couldn't retain any of this information. Now I have to replicate this all again on my computer.
It wasn't possible to export the entire library as the external drive was fat32 format an I didn't want all of it. It would be nice to export a bunch of events to someone and have it retain the name.
Does anyone have a work around or will this be fixed at some point by Apple?

Why Does Live View In DW Not Work With BC Template?

The live view using a BC template in DW CS6 shows "PAGE NOT FOUND" in the body section but the header and footer look fine. I should also point out that the index.htm page works fine, it's just the other pages that have this problem. What makes it weirder is that the site works fine in all other modes including when viewing in a normal browser, it's ONLY when in live view! I also noticed that if I delete the .htm extension in the url in the DW browser when in Live View it fixes the problem, but this requires me to do this everytime I want to switch to live view and surely is either a problem with how the BC template files are named or DW CS6 is buggy? Hopefully this is an easy one to answer??

Hi Alex,
Thanks for your reply, I have done a video demo at http://screencast.com/t/RsutrvoFn0xZ
Date: Thu, 14 Feb 2013 05:49:55 -0800
From: [email protected]
To: [email protected]
Subject: Why Does Live View In DW Not Work With BC Template?
    Re: Why Does Live View In DW Not Work With BC Template?
    created by Alex Pavelescu in Dreamweaver & Business Catalyst - View the full discussion
Hi, Please provide the site url, and if you can, a video demo of the issue you're facing, using http://www.techsmith.com/jing.html, where you could also display the way you have your side setup ( Dreamweaver menu > Site > Site manager > http://screencast.com/t/GqqBk9MY4ck ) Kind Regards,Alex
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5072585#5072585
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5072585#5072585
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5072585#5072585. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Dreamweaver & Business Catalyst by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

HT1476 why does the battery usage percentage not available in ios5.1.1???

why does the battery usage percentage not available in ios5.1.1???
and why is clock not available on ipad????

Because that is a decision the Apple made. You can get the battery percentage (within 5%) by using a free app such as BatteryLife Lite, but it will not show the percentage on the top of your screen.

Why does it say itunes can not contact the ipod update server because you are not connected to the internet when i am connected to the internet?

why does it say itunes can not contact the ipod update server because you are not connected to the internet when i am connected to the internet? i need to update my ipod i even changed the LAN settings and it stilll doesnt work

Have you seen this article?
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
B-rock

Why does the type tool and note tool close my InDesign program? [was: InDesign CC technical]

Why does the type tool and note tool close my InDesign program?

Install the CC Desktop app, or try Help > Updates....
If all else fails, you can try Crash | Launch, selecting Type tool, but there are other bug fixes in the update.

Why does my Epson 3800 printer not print to scale?

Similar Messages

Maybe you are looking for