Why does Notes (internal ML app) create a saved note every time I edit the one I'm writing?

Hello Folks!
My problem with Notes is the following. I'll explain it through an example because I think that's the easiest way to make it clear.
Well, I open Notes and start to write down a new note; suppose I type "Ask Sarah about course book" then I notice I made a mistake: it's not Sarah, it's Loren, so I edit my previous note to have "Ask Loren about course book", but at the end my result is not having only one note, I have two! One with "Sarah" and another with "Loren"! Now, if you think about this in a more general way, you can understand what happens on my Notes: I've not actually found a rule Notes follows to create these new different notes. I only know that whenever I write down a note I end up with a huge number of them, which are nothing else than the previous version of the same note.
Anyone has ever heard of this bug?

When you use IMAP, as opposed to "On my Mac," Notes will create a folder called "Notes" on the mail server. It will then store notes in there. If you create subfolders in Notes (which you can do), those will be stored as subfolders of Notes on the server.
So in the case of Gmail, you should be able to log onto your Gmail web account and the notes should probably show up in "All my Mail" with a label of Notes (this is because Gmail's IMAP implementation is VERY nonstandard and it doesn't actually support folders; it uses labels instead). If you view the Notes label in Gmail's web interface you should see all your notes.
Because of Gmail's IMAP implementation you should be very careful not to remove the "Notes" label from any of your notes if you're in the web interface, or they will disappear from the Notes app on OS X itself.

Similar Messages

Why does my mac mini's mouse show a pinwheel every time I hover over the date area? Also, sometimes the date shows up incorrectly.

Why does my mac mini's mouse show a pinwheel every time I hover over the date area? Also, sometimes the date/time shows up incorrectly. It started happening after I updated to OS X Mountain Lion.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Click the Clear Display icon in the toolbar. Try the action that you're having trouble with again. Post any messages that appear in the Console window – the text, please, not a screenshot.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into a message.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

Why does a new run once start up program run every time I start my computer? The start up program is coming from Reader XI. The only name on it is a number starting with 141_______.

Why does a new run once start up program run every time I start my computer? The start up program is coming from Reader XI. The only name on it is a number starting with 141_______.

See also https://forums.adobe.com/thread/1654402

ICloud symbol in settings does not appear, instead there is the one for MobileMe, what do I have to do or didn't do well?

iCloud symbol in settings does not appear, instead there is the one for MobileMe, what do I have to do or didn't do well?
Thanks in advance

If your Mac is one year old it did not come with Lion, so you must have purchased and installed it yourself, or it is not installed.
Do this
Go to Apple Menu>About This Mac:
It should look like this:
If your version is anything other than 10.7.xx you do not have Lion (10.6 is Snow Leopard)

There is something wrong with the volumes buttons in my macbook pro, every time i pressed the one who raises the volume, it leads me to the screen where (i do not no what its called) the background is black with the date and time and a calculator.

There is something wrong with the volumes buttons in my macbook pro, every time i pressed the one who raises the volume, it leads me to the screen where (i do not no what its called) the background is black with the date and time and a calculator. However, when i lower it, my safari tab goes out of the screen. What do you guys think i should do? I'm getting very nervous.

hey HAbrakian!
You may want to try using the information in this article to adjust the behavior of your function keys to see if that resolves the behavior:
Mac OS X: How to change the behavior of function keys
http://support.apple.com/kb/ht3399
Take care, and thanks for visiting the Apple Support Communities.
-Braden

Dreamweaver does not allow me to edit the editable region

Oh my, I'm so desperate in this, I have a .dwt and have set up the editable region as well. When I want to make a new html file from the said template dreamweaver does not allow me to edit it. I mean, all the code is completely grayed out as if the template itself is locked by default.
What I want to do is to create several new pages such as new albums, charts, genres, contacts (which all based on the home template) The home template itself has slider in its body. For the new html files I'm about to create (which I'm so desperate why I can't do so) I want the header and footer to remain the same.
Here is an image of my index.dwt (my homepage) anything inside the red frame is what I want to edit for new albums, charts, genres, contacts, login page, etc. The top part is the header and the bottom one is the footer (Excuse the right image, I'm working on dual screen)
Any help will be appreciated!
Sorry for my english

Hello SeptianNugraha,
here some hints concerning while handling templates (I quote):
The main principle of DW Templates is:
Non-editable regions = propagate to all child pages. The content of non-edtable regions is identical on all child pages. When you edit a non-editable region, DW propagates all changes to all child pages.
Editable regions = do not propagate because they're unique to every child page. The whole idea of editable regions is that they contain page specific content which does not appear on any other child page.
And:
PART 1
1. Create a prototype page with all the sitewide elements (common header, footer, sidebar, etc..) that you will need for your entire project. This requires some careful pre-planning even for small web sites.
2. Validate your code & test this prototype page in all major browsers. 3. When you're completely satisfied with your layout, SaveAs Template. DW will save this as a .dwt file in a site folder called Templates.
4. DW will ask you to add Editable Regions for stuff that will change from page to page. Do this and SAVE.
5. Close your Template.dwt file.
PART 2
1. File > New Page > from Template. Select the template you wish to use. Hit OK.
2. This is a child page. You can only edit content within editable regions. Everything else is locked.
3. SaveAs index.html (your home page) to the root in your local site folder.
PART 3
Repeat PART 2 for each additional page required.
PART 4
1. Open your main TEMPLATE file and add a navigation menu with links to your site pages.2. SAVE.3. DW will ask if you want to populate changes to child pages. Hit yes.
4. Publish all site pages to your server.
PART 5
If you should ever need to edit your TEMPLATE .dwt file, Repeat PART 4.
Good luck!
Hans-Günter

Why does TS ask to save 'NI_Database_Types.ini' every time I quite TS?

Ever since I installed TestStand 3.5 I have been getting this. Every time I quit the TestStand application, i get a popup box that says
'The following files are modified. Check the files you wish to save before exiting. You will lose any modifications to unchecked files.' and it always lists NI_DatabaseTypes.ini as a changed file.
I don't use databases.
I don't have them enabled. I have checked 'Disable Database Logging' and all of the tabs in the Database OPtions pane are greyed out.
All I have to do to duplicate this is to start up teststand and then quit teststand. I don't even need to load a sequence file.
What can I do to stop this annoying message?
(Why can't you guys introduce a new version without introducing new errors? )

Hi,
Out of interest, what do you install first, the LabVIEW or the TestStand.
Regards
Ray Farmer
Regards
Ray Farmer

Why does not Apple help us with the wretched lightning cables that go so easily broken?

6- 7 cables im just 6 month, 3 burned, 3-4 snapped, and one lost the end, we are getting nervous and afraid of using Apple products, and have bought Denver instead. Apple does not answear and the retailstore has a misery sevice.

You'd get more knowledgeable answers if you posted in the appropriate forum - that would be iPad. This forum is to discuss the forums themselves.
When you re-post, please be specific on what you did and what happened.

Why does is say purchaseable items too big for download every time I try to download an app?

Every time I try to download a game or app my iPhone says error message purchasable items too big for download. I even changed my billon information. Anyone know what the problem might be?

Connect your iPad to iTunes on your Mac/PC and then go to your iPad's summary window. Then click back up if you want to back up your iPad first. After that click restore. Later it will ask you if you want to setup the iPad as a new iPad. Select the option to setup your iPad with your latest back up.

Why does not safari allow to keep the zoom level over the whole website? This is universal problem for all ipad browsers.

This is a big problem on sites like Tomshardware and Sweclockers and probably many more that Safari is not capable of keeping the zoom level the same over all website pages. And it makes the browsing experience on the IPAD an annoyance.
You have to constantly double tap to see the website clearly for each webpage load. There should be settings to allow to remember the zoom level
for a whole website. So you don't have to double tap on every new page of the website.
The other browsers like ICAB and Mercury are not handling this any better and seem to be limited by the webkit rendering options available.
It's instantly visible on Sweclockers and it becomes a problem on tomshardware when you click on a review link.
I have included pictures here that showcase the problem.

We are all just your fellow users here. If you intended this as a suggestion to Apple, your best bet would be to submit it at this link:
http://www.apple.com/feedback

What is "offer mosquito" and why does it automatically reload to my add-on list every time I reboot

There's a good bit of wisdom in the old expression, "if it ain't broke, don't fix it." You could cut the number of updates by at least 50% if you'd only fix things that ARE "broke," And, every time you update FF, it causes another set of problems that I have to fix. The latest is an add-on called "offer mosquito" that's automatically added to my list of add-ons. I remove it --not disable, REMOVE-- the next time I reboot it's back. I'm growing just a wee tad weary of doing this...How do I get rid of it for good???
Using FF 25.0 on PC running Windows 7 Home Premium 64 bit.

hello Goodolgal, the behaviour you've described is not caused by any firefox update but by adware/malware on your pc. please run a full scan of your system with different security tools like the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes] and [http://www.bleepingcomputer.com/download/adwcleaner/ adwcleaner].
[[Troubleshoot Firefox issues caused by malware]]

Want to go, it either does not nd I cannot correct the one letter.

New to iPad. How do you move the cursor back without erasing everything you've typed? When I tap on the place I want to go, It either does not move, or the word highlights in pink and I cannot correct the one letter? I also cannot get the first letter in a case-sensitive situation to come up as lower case, even using the arrow key. Thanks for your help!

If you press and hold the screen then after a second or two you should get a magnifying glass which should allow you to position the insertion point more accurately - you can then re-position it back to the end of your text by the same method. You should be able to change the case by pressing the shift/up arrow key and then typing the letter; if you go back and delete an upper case letter then the letter that you type in its place will be in upper case unless you press the shift/up arrow button before you type it i.e. the case will default to the last deleted character.

Premiere Creates New .CFA files every time I open the project

I have a project that contains 2 long (70 min.) clips. Each time I open the project, Premiere conforms the audio for both clips. I save the project, close Premiere, open it right back up and it starts conforming the audio again.
I have tried changing where Premiere stores the audio preview files, but no matter what I do, Premiere puts the .CFA files where it wants.
I have 8 versions of the same .CFA files - and the next time I open Premiere, I'll have 9.
Any help would be much appreciated!

I took a look at the Troubleshooting link you posted, and it was a little helpful but isn't quite up to date. For example, it says to specify a new location for conformed audio files by choosing Edit > Preferences > Scratch Disks, which isn't an actual menu tree in CS4. Here is how I've set things up:
I have gone to Edit > Preferences > Media and set the location for Media Cache Files to C:\PPro_Video and set the Media Cache Database to the same folder. When prompted, I chose to delete the existing Media Cache database file. I left the "save media cache files next to originals when possible" box unchecked.
Then I have gone to Project > Project Settings > Scratch Disks and set the Audio and Video Preview files to the same folder (C:\PPro_Video)
I saved the project, closed Premiere, and deleted everything inside C:\PPro_Video.
I restarted Premiere and opened my project. Premiere created three folders inside C:\PPro - Media Cache, Media Cache Files, and Adobe Premiere Preview Files. I then waited while Premiere created the .CFA and .PEK files inside C:\PPro\Media Cache Files. Once they were done, I closed Premiere.
Reopened the project. Premiere immediately begins to conform the audio again. I look inside C:\PPro\Media Cache Files and see new versions of PEK and CFA files being created with the same file names suffixed by an _1.
Setting aside, for the moment, that using my C drive for a scratch disc might not be optimal, what am I doing wrong?

When I open Firefox, I'm prompted to create a profile, but every time I click the create profile button, the window opens and immediately shuts.

I've uninstalled and reinstalled mozilla several times. I've read online about looking for a profile.ini file, that file does not exist on my computer. Everytime I open firefox, the choose user profile box appears, and when I click create profile, a window opens and immediately closes.

If even the Mozilla folder isn't there then it is possible that Firefox already crashes before being able to create that folder structure.
Try to do a clean reinstall and delete the Firefox program before (re)installing a fresh copy of the current Firefox release.
*Download the full Firefox installer and save the file to the desktop http://www.mozilla.org/en-US/firefox/all.html
If possible uninstall your current Firefox version to cleanup the Windows registry and settings in security software.
*Do NOT remove "personal data" when you uninstall your current Firefox version, because this will remove all profile folders and you lose personal data like bookmarks and passwords including data in profiles created by other Firefox versions.
Remove the Firefox program before installing that newly downloaded copy of the Firefox installer.
*(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
*(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
*It is important to delete the Firefox program to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall
Boot the computer in Windows Safe Mode with network support (press F8 on the boot screen) as a test.
*http://www.bleepingcomputer.com/tutorials/how-to-start-windows-in-safe-mode/
Do a malware check with several malware scanning programs on the Windows computer.
Please scan with all programs because each program detects different malware.
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware: http://www.malwarebytes.org/mbam.php
*AdwCleaner: http://www.bleepingcomputer.com/download/adwcleaner/ http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware: http://www.superantispyware.com/
*Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: http://windows.microsoft.com/en-us/windows/using-defender
*Spybot Search & Destroy: http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan: http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller: http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

HT4059 why does my book people app display e_auth_bad_device_key_or_p_kcs12 when i try to download from the cloudshelf

See subject for question

Guesses, not promised solutions.
It may be that the ADE authorization has got corrupted somehow.
Try de-authorizing (ctrl-shift-D) and restarting ADE.
It should ask you to re-authorize.
That may help; no promises.
Have you got an eReader device plugged in while you are trying to access the book?
If so, try with it unplugged. There is a bad interaction between ADE2.0/Overdrive and certain devices.
If that works, the best longer term solution is probably to install the older v1.7.2.
Version 1.7.2, it is a little difficult to find, available on Adobe site for Windows and for Mac.
http://helpx.adobe.com/digital-editions/kb/cant-install-digital-editions.html
The forum software is sometimes corrupting the link above. There shouldn't be a blank in 'editio ns.html'. The following redirects to the same page: http://tinyurl.com/diged172

Why does Notes (internal ML app) create a saved note every time I edit the one I'm writing?

Similar Messages

Maybe you are looking for