Why does the option to print front to back only appear randomly?

Have only seen the option to print back to front offered once or twice - why isn't it always there?

Please read this post then provide some details.  What printer model? What operating system? 
What are your settings for paper type?  Duplex printing is not compatible with photo paper, transparency media or when printing full bleed (edge to edge).
What program are you printing from?  Some programs remember their own printer settings regardless of default settings in the system.
Bob Headrick,  HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Similar Messages

  • Why does the option to watch a movie even appear if it then will not play because not downloaded? Worse, then only 23hrs left to watch!! Paying for what is not delivered!!

    ITUNES:  Why does the option to "watch movie now" appear & when chosen movie will not play because still downloading. WHY SHOULD THE OPTION APPEAR IF MOVIE CAN"T BE PLAYED. Then when movie is viewable, only 23hrs to watch! PAYING FOR MOVIES WITHOUT OPPORTUNITY TO VIEW does not make happy consumer. Emailed Itunes over and over about problem and stilll paying for services unrendered.

    When iTunes/iPod sync process failed due to timeout, the iPod, has only the initilaised  filesytem structure at the start of the Sync.
    The timeout failure could be due to
    Bad hardisk - do the iPod disk diagnostic, refer to this excellent post by tt2
    Slow USB port or resource - Dont use any USB hub, disconnect all other USB devices while syncing
    Timeout due to Antivirus or other plugins - disconnect from Internet and stop the Antivirus or monitoribng software if you are syncing.
    Preferably stop doing other things while syncing this ancient device, which the latest iTunes designer, think will soon be extinct.
    Have a nice day!

  • Why does the "You need to restart your computer" error appear when I open Vuze?

    Hi there,
    I apologise that this has probably been asked many times however none of the relevant threads I have come across solved my issue.
    I have the most current version of Vuze and a Macbook Pro (Version 10.6.8 OS X).
    After using Vuze for a year with zero issues, today I have had to restart my MBP several times due to this error message which is displayed in 5 different languages: "You need to restart your computer. Hold down the Power button until it turns off, then press the Power button again."
    This error only occurs when Vuze is open.
    No idea why this is the case. Could it perhaps be a file I am downloading?
    Any help would be really appreciated. Thank you for your time.

    Don't unplug the M-box while your MBP is on.

  • Why does the default Mac print dialog show up in Acrobat?

    Instead of the Acrobat print dialog:
    The Mac print dialog:
    shows up when I invoke the Print command.
    Is there a preference that needs to be reset? Sometimes quitting and restarting Acrobat fixes the problem, but I've had computers that have never shown the Adobe print dialog, only the Mac dialog.

    according to your illustrations you have two different Printers setup.
    Unfortunately, in Acrobat 9 the Page setup Dialog does not function  it shows any printer.  I've explained here.
    JimGerman wrote:
    Instead of the Acrobat print dialog:
    The Mac print dialog:
    shows up when I invoke the Print command.
    Is there a preference that needs to be reset? Sometimes quitting and restarting Acrobat fixes the problem, but I've had computers that have never shown the Adobe print dialog, only the Mac dialog.
    IF this is Acrobat 9 - I have sent back bug reports, I've posted in Fedback forum (not discussion Forum) about this as well.  I have yet to see an answer to the problem. What you need to do is on the 2nd one that has the different dialog is set that to the same printer as in the first.
    IF page setup does work in your version of Acrobat make sure that while in acrobat choose correct printer then in page attributes click and choose save as default. That way acrobat will always default to this setup to start with when opening Acrobat.
    Another thing you can try is if you have removed a printer and added a new printer go to Printer Utility, and remove the old printer. If you have added a printer make the new printer the default Printer.

  • Why does my Epson 2200/ Print: Media Type list only 4 of the media types?

    For some reason my Epson 2200 when I'm trying to print a photo in Photoshop, and other programs, shows under Print/Presets/Print Settings/Media Type: Plain Paper, Enhanced Matte Paper, Velvet Fine Art Paper and Water Color-Radiant White.
    What isn't shown is the rest of the paper media types of: Premium Glossy, Premium Luster, Premium Semi Gloss, Canvas-Luster and a whole host of variations in those types of media. In essence what isn't showing are most of the print profiles from Epson for the different types of paper.
    I done everything that I can think of to correct the problem and nothing seems to work. Now it has progressed to the point I'm have the same problem with my Epson Stylus Photo R200.
    Both Printers are on USB connections. I've tried deleting the printers from the Printer Setup Utility; running Disk Utility/Repair Permissions; trashing Epson Printer Utility; trashing the preferences from the Home folder; trashing the Epson folder from the HD/Library/Printers folder; and then reinstalling all of those trashed items and deleted items and running Disk Utility/Repair Permissions.
    Nothing seems to work! I need help here ..... what am I doing wrong??
    QuickSilver G4/Dual 800/1.5gig.memory   Mac OS X (10.4.8)
    QuickSilver G4   Mac OS X (10.4.8)  

    I figured it out myself and answered my own question. If you have matte black ink installed when you are trying to print on glossy, the paper type is limited to only that media which black matte ink is specified. You have to switch out the matte ink for photo black ink. Delete the printer from the Printer Setup Utility and reinstall the printer. Whereas with the Photo Black Ink you can print on all types of media.
    Nothing like driving yourself crazy over a minor point that puts a cog in the wheels of progress. :O)

  • Why does the PCI-1408 we used can reach only 8 fps?

    We are using IMAQ PCI-1408 to stud y the motion of an object in mechanics experiments. The maximum acquisition rate that we could obtain is just 8 fps. We are using a computer with Pent III 800Mhz processor and 128 Mb RAM. We even tried to use a code in from Costumer Solution (Digital Video Recorder with Motion JPEG, Lehnich H. et. al.), still we could not reach 30 fps. What could we have done wrong?

    Thanatus,
    I assume your camera is capable of 30 fps.
    First use MAX to verify that you can acquire 30 fps. Select your camera and use the Grab button. You should get full speed video display. The lower right hand corner should show how many frames per second it is acquiring and displaying. If it is only 8 fps, you have a problem with your hardware. If it is 30 fps, your problem is in the software.
    The most common software problem is using snap, which is very slow. You should either use grab or a sequence to acquire your images. Most likely, you will want to acquire a sequence of images and analyze them after you acquire them. If you are using grab, your frame rate will depend on your loop speed. If you are doing analysis simultaneously, that is proba
    bly slowing you down.
    Bruce
    Bruce Ammons
    Ammons Engineering

  • Why does the message "looks like spam or a virus" appear when sending a picture from my phone?

    Photos sent to the printer come up with a message saying it looks like spam or a virus. Photo printed ok first time, now gives that message in the jobs listing.  Emailed from an Android phone to an HP Photosmart 6510.

    The "spam/virus" message often occurs because the email did not contain any text in the subject line. Please try re-sending an email to your printer and adding text in the email's subject line.
    I want to be sure that the information provided has completely resolved the issue.  Please reply to this email and let me know whether or not the issue has been resolved.  If the issue persists, please include the following pieces of information so that I may assist you further:
    1. Are there any attachments being sent? If so, which attachment file type is being used (PDF or Word documents, JPG photos, etc)?
    2. Which email address/addresses are used to send ePrint emails?
    3. The results of a test email (success/fail) which will help isolate the source of the issue. Please follow the instructions below:
    a. Type the word "test" in the subject line
    b. Type the word "test" in the email body
    c. Do not include an email signature
    d. Do not include an email attachment (documents/photos/etc.)
    Please include the results of this test email in your reply.
    I hope the initial set of steps resolved the issue but look forward to providing you additional support if necessary.
    If I have SOLVED your issue, please feel free to provide KUDOS and make sure you mark this thread as SOLUTION PROVIDED!
    Although I work for HP, my posts and replies are my own opinion and not those of HP.

  • Why does the iCal app on my MacBook Pro only have a 2-year archive? Where did everything before that go? And can I get it back?

    I use my iCal as a daybook and every now and again need to reference events or occurences from several years ago. I tried to look something up from back in 2010 and the iCal on my MacBook Pro only has iCal data from Jan 1, 2011 onwards. Everything I've put in prior to that seems to have disappeared! I can't find anything under preferences that mentions archiving/storage. Can I change the setting so that this info is kept forever? And can I get my previous info back?

    You can only sync with one computer. When you synced to the new computer it would have erased it and synced what was on the new computer.
    You always need to have a backup, an iPhone is not a storage device.
    When you get a new computer you need to transfer your library before syncing
    If you don't have a backup you may be out of luck
    The only thing would be if you're in the US and have access to the iCloud beta to reload purchases
    http://support.apple.com/kb/ht2519

  • Why do the options for a new Home page always appear first when I sign in when I already have a Home page?

    The screen page for creating a new Firefox Home page always shows up first when I sign on.....but, I already have a Home page and have to click again to get there.
    How can I get Firefox to go directly to my actual Home page?

    Hello Kathie,
    Sorry for the inconvenience that has caused to you.
    Please let me know if you have tried converting any other PDF to word with Reader.
    Alos, please sign up at "https://cloud.acrobat.com/" using your Adobe ID credentials. Click on 'ExportPDF' tab and upload the PDF that you want to convert to Word.
    Let me know if this converts fine.
    Hope to hear from you.
    regards,
    Anubha

  • Why does the Adobe Flash Player pop up keep on appearing when using the browser. It never used to before the upgrade to the latest version.

    Since updating to the latest version of Firefox the Adobe Flash player pop up continually pops up whether the page needs flash player or not. It even shows for a text page.
    It is very annoying

    You can set the default in "Firefox/Tools > Add-ons > Plugins" and change that for the Shockwave Flash plugin to "Always Activate".
    You can inspect and manage permissions for the domain in the currently selected tab via these steps:
    *Click the "[[Site Identity Button|Site Identity Button]]" (globe/padlock) on the location/address bar
    *Click "More Information" to open "Tools > Page Info" with the Security tab selected
    *Go to the Permissions tab (Tools > Page Info > Permissions) to check the permissions for the domain in the currently selected tab
    See also:
    *https://support.mozilla.org/kb/how-do-i-manage-website-permissions

  • Why does the ringtone on my N70 revert back to the...

    No matter which tone I select in my profile, every other call I answer is announced by the Nokia ringtone - embarrassing and annoying! How can I stop this?

    Have you tried installing the N70 ringtone patch file?
    http://nds1.nokia.com/phones/files/software/Nokia_N70_patch.SIS
    ( from this page: http://europe.nokia.com/A4144780 )Message Edited by wicker_man on 16-Aug-2006
    01:54 PM
    All those who believe in psychokinesis raise my hand.

  • Why does the menu option change to "save as" after I select the print button?

    why does the menu option change to "save as" after I select the print button?

    >>The print command is selected in the File pull down menu, the print menu page pops up, I can then select my networked printer (which incidentally is confirmed to work with other software), the print command is in the bottom right hand corner and finally after depressing this print button a "save as" pop-up menu appears and then it only re-saves the file. Is this an issue with the pdf reader install?  

  • Hp officejet pro 8500 a910 does not give me the option of printing in black and white

    Hello,
    My hp officejet pro 8500 a910 does not give me the option of printing in black and white. How do I choose to print in B&W when the option does not show up under properties?
    Thank you.
    This question was solved.
    View Solution.

    Hi,
    From the application being used to print, Click File > Print
    Click Properties or Preferences to access the Printing Preferences Dialog.
    Click the Advanced button at the bottom of the window.
    Under Printer Features, Click the Print as Grayscale selection box and set as High Quality Grayscale or Black Ink Only.
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • After completing a credit card sale on virtual merchant the option to print does not drop down it did before installing this latest firefox on my new computer

    after completing a credit card sale on virtual merchant the option to print does not drop down as it did before i installed firefox on my new computer . the people at virtual merchant said it might be a pop-up prevention by firefox ...could this be true?

    Can you check this issue on Firefox 9?
    * getfirefox.com

  • Why does the "show the blocked pop-up" option not appear?

    The pop-up blocker used to give the option to "show the blocked pop-up." This option is listed in parentheses on the Pop-Up Blocker help page. Since I upgraded to FireFox 9.0.1 (and still in 10.0) I often don't have the option to "show the blocked pop-up." Some sites are really unusable without this option.
    There also used to be a question about this on the forums. It still shows up in a Google search, but not by searching FireFox Help. I'm running Windows XP, but the op was running Windows 7. I have not noticed the problem on my Linux machine at home.
    My question is: Why does this option not (always) appear, and is there any way to make it appear?
    Thanks!

    You can set the default in "Firefox/Tools > Add-ons > Plugins" and change that for the Shockwave Flash plugin to "Always Activate".
    You can inspect and manage permissions for the domain in the currently selected tab via these steps:
    *Click the "[[Site Identity Button|Site Identity Button]]" (globe/padlock) on the location/address bar
    *Click "More Information" to open "Tools > Page Info" with the Security tab selected
    *Go to the Permissions tab (Tools > Page Info > Permissions) to check the permissions for the domain in the currently selected tab
    See also:
    *https://support.mozilla.org/kb/how-do-i-manage-website-permissions

Maybe you are looking for