Why doesn't my Phone work properly with my Cars Bu...

Car manufacturers are now building complex car kits into their vehicles.
The companies include:
Ford, Audi, BMW, Alfa Romeo, Peugeot, Vauxhall/Opel, Volkswagen, Mercedes, and other high end specification cars.
One of the functions, is that it pulls the phone book data from the phone via bluetooth.
Background Information 
A lot of the Nokia E and N series, Symbian S60 handsets, do not carry the required bluetooth profile in their bluetooth stack.
The phone is missing the Phone Book Access Profile (PBAP) that allows the car to pull data from the phone.
Why the phones do not carry the profile is unknown. What is known is that using the Nokia 810 car kit downloader software, you can partly restore some of this functionality.
Additionally the Nokia 616 Car Kit Downloader will also function, along with the Ford Connectivity Downloader.
Workaround 
The information is here:
http://europe.nokia.com/A4143881
You'll need to delete the existing pairing in the handset and the car, then install and run the application, don't just install the application and expect it to work, you must re-pair the handset and the car.
When it is installed start the application, and then re-pair the phone to the radio, this may then copy your contacts into the radio, be paitent, as it can take a few minutes to copy and setup.
It may copy the phone book over, but the Missed Dialled and Received calls may not work.
I have tested this with an Audi S3, A4, and A6 on a Nokia N82 and N95.
The Nokia E71, appears to have the profile and functions correctly with an Audi car kit, in Handsfree Profile mode.
The Nokia E71, when connected in SIM access profile mode is the same as the other E and N series handsets are requires the 810 or 616 downloader to be installed in the handset.
Installing the 810/616 downloader only restores phone book functionality, there are some software combinations on car and phones that work without the downloader.
It may also be possible for your car manufacturers franchised dealer to be able to update the software in your car so that additional features are available, they may charge for this service. Also updating software in the phone may also help, as Nokia may see fit to add the profile if they are able.
For some cars and handsets, when you are connecting with the SIM Access Profile function, you will still need to install the 616/810 downloader application as detailed above, as the phone normally switches off most of its functionality. The phone book will then normally function when you have installed the application.
The workaround only resolves the problem with the phone book. Problems such as random disconnecting which also is reported, are beyond the scope of this article.
Edit: 24-01-09
I have noticed recently that random disconnecting can be caused if you have an Internet Telephony Service running in your handset. Also if you have the WLAN discovery setting enabled then this can cause the same problem - whilst I am not attempting to try and resolve random disconnects, it could be a reason for why this is happening.
I have recently installed a VoIP service in my handset and 100 mtrs from my home when the handset disconnects from this service at my house, the Bluetooth disconnects from the Car Kit, in my E71.
Edit 14-04-09
Audi also make a Bluetooth Sim Access Profile adapter for their Generation II and Generation III (Low) mobile telephone interface. (Audi Part No: 8P0051440) The SIM access service will require the 810 phone kit downloader application. With this on my kit I am getting disconnections with Bluetooth. To prevent this, I switch Bluetooth off and then on again prior to connecting to the kit, this resolves the disconnecting.
Edit 12-05-09
Further to the Audi edit above, I now have an Audi S4 2009 with the Audi Mobile Phone Preparation (high) for this to function correctly with phone book access the 810 Downloader needs to be installed, and running when the phone connects to the car every time it connects. Otherwise the phone book access does not operate.
Edit:12-06-09
You can also use the Ford Contact Downloader application from
http://www.ford-mobile-connectivity.com/ - select downloads then Select a Nokia E or N Series Device and download the contact application (this works fine in my Audi)
Shunts...
Message Edited by shuntfield on 02-Nov-2009 02:51 PM
I will mostly be communicating with a Nokia E72 Zodium Black
Nokia E72-1 with Vr 051.018.207.04 Software
If this post helped... Add some kudos!!

It allows me to load the AKO CAC sign in page.  I click sign in using CAC, it asks me for my pin, I enter it then it load the page saying it has a problem with the security

Similar Messages

  • Up next doesn't seem to work properly with multiple speakers over airplay. The status bar on the computer shows the song playing, but not over airplay. When I restart the song it plays, but the same thing happens when the next song cues up. Any ideas?

    Up next doesn't seem to work properly with multiple speakers over airplay. The status bar on the computer shows the song playing, but not over airplay. When I restart the song it plays, but the same thing happens when the next song cues up. Any ideas?

    Hey briannagrace96,
    Welcome to Apple Support Communities! I'd check out the following article, it looks like it applies to your situation:
    iPod: Appears in Windows but not in iTunes
    http://support.apple.com/kb/ts1363
    You'll want to go through the following troubleshooting steps, and for more detail on each step follow the link to the article above:
    Try the iPod troubleshooting assistant:
    If you have not already done so, try the steps in the iPod Troubleshooting Assistant (choose your iPod model from the list).
    If the issue remains after following your iPod's troubleshooting assistant, follow the steps below to continue troubleshooting your issue.
    Restart the iPod Service
    Restart the Apple Mobile Device Service
    Empty your Temp directory and restart
    Verify that the Apple Mobile Device USB Driver is installed
    Change your iPod's drive letter
    Remove and reinstall iTunes
    Disable conflicting System Services and Startup Items
    Update, Reconfigure, Disable, or Remove Security Software
    Deleting damaged or incorrect registry keys
    Take care,
    David

  • The Bluetooth on my 2012 Lexus doesn't work with my iPhone 5.  My old android phone worked perfectly with my car.  Even the tech guy at Lexus couldn't get it to work.  What is apple doing to fix this.

    The Bluetooth on my 2012 Lexus doesn't work with my iPhone 5.  My old android worked perfectly with my car.  Even the tech specialist at Lexus couldn't get it to work.  Lexus said that other iPhone 5s were having the same problem.  What is apple doing to fix this?

    Going to the local Apple store this morning...
    My problem is not uncommon as the board is showing signs of this happening to many others as well. That is where I found the restore and reboot information to try to solve the issue of crashing apps.
    I understand that Apple will not "give away the cow", but letting iPhone users know that the problems they are having are being addressed by Apple is a little more comforting than nothing at all. Other wise, all the apps in world are useless and even more importantly worthless, if a person has to reset/reboot/reload just to get them to work.
    IF Apple can not address the basic problems with todays iPhone apps, why should one believe that the iPhone 3.0 OS is any better? Using a PC comparison, which is better, XP or Vista. If the current iPhone OS of 2.2. what ever is not working that well (as related to down loaded apps and iTunes), will OS 3.0 be any better?
    The waste of time I refer to is in going to the apps store and downloading the apps... Again why by apps if the free version does not work?

  • Why AdobePPro CS4 won't work properly with Win7 Ultimate OS

    Can u please explain why Adobe PremierePro CS4 won'r work properly with Windows 7 Ultimate?? Is it because of a "bit" differences?? or for any other reason?? I have freezing problems on time line.. I am using Sony XD EX1 clips on the time line. Sometimes it works up to Dynamic LInk Encore and when it starts encoding, after few seconds it gives an error message "Encode failed" My computer config: WIN7 Ultimate/ Xeon 2.4 GHz, 12 GB RAM, Nvidia FX3800 Video card with 1GB RAM, C:\ 1TB SASHDD on RAID 5 system, D:\600 GB SAS HDD (not on RAID) Any thoughts to get it going? Thanks

    Read A fix via Virtual XP
    http://forums.adobe.com/thread/702693?tstart=0

  • GC doesn't seem to work properly with Swing components

    Well, I have a problem, and it's quite a big deal.
    I don't understand why the java GC refuses to free the memory.
    I have made a VERY LITTLE example, so that everybody will see what the problem is made with.
    a frame with 2 buttons. the first one make another frame appears, which contains a quite big Swing component. The other is here in order to try to free the memory of this frame.
    Here are the 2 classes :
    import javax.swing.*;
    import java.awt.*;
    import java.awt.event.*;
    public class FirstClass extends JFrame{
    private JButton jButton1 = new JButton("free memory");
    private JButton jButton2 = new JButton("load frame");
    private MyFrameColor frame;
    public FirstClass() {
    jButton1.addMouseListener(new java.awt.event.MouseAdapter() {
    public void mouseClicked(MouseEvent e) {
    jButton1_mouseClicked(e);
    jButton2.addMouseListener(new java.awt.event.MouseAdapter() {
    public void mouseClicked(MouseEvent e) {
    jButton2_mouseClicked(e);
    this.getContentPane().add(jButton1, BorderLayout.NORTH);
    this.getContentPane().add(jButton2, BorderLayout.SOUTH);
    this.show();
    public static void main(String[] args)
    new FirstClass();
    import javax.swing.*;
    import java.awt.*;
    public class MyFrameColor extends JFrame {
    JColorChooser jColorChooser1 = new JColorChooser();
    public MyFrameColor() {
    this.getContentPane().add(jColorChooser1, BorderLayout.CENTER);
    the problem is that, according to the Windows task Manager the memory isn't freed after having pressed on "free memory" button.
    Moreover, in my real application, there are so much data that aren't freed this way, that, at the third launching of a frame, I have a Out of Memory exception !
    THank you for answering
    Have a good day :-)

    First, obviously you didnt include all the code. And the most important part(the references to the classes in question) are missing. How can we make a judgement?
    Second, the windows taskbar is no measure of how much memory your program is using, its a measure of how much memory the JVM is using. You didnt write the JVM so you really should not be concerned with that.
    1. Try using System.freemem() or some similar call to see what your program is actually using.
    2. Try making the GC verbose to see when it actually reclaims objects
    3. Try calling the GC to force a little GC before you check the memory.
    4. Try calling UpdateUI if it actually shows that your memory is really not being released.

  • Extreme & Express - Why doesn't extending range work properly?

    I have an Airport Extreme 802.11n and an Airport Express 802.11g. The reason I bought the Airport Extreme was that I could use the Express to extend it's range and the two would integrate and all would be good and well. But here's the issue, and it's been with me pretty much since I bought the pair about 3 months ago.
    They seem to have trouble keeping together. What I mean by this is, if both are plugged in and connected, at some point (I haven't noticed a regular pattern to it) when I open a laptop, be it an 11g iBook or an 11n MacBook, it will get a self assigned IP address. Which isn't greatly useful to me. The only way to resolve this is to unplug the Express, turn off airport on the client, turn it back on again and reconnect directly to the Extreme.
    Now I can't work out what might be going on here, since it happens both when the clients are set to obtain an IP address through DHCP or if it's been set up manually. I have tried setting up the base stations both manually and through apple's setup assistant in Airport Utility. Often when a client finds itself stuck like that though, when I open Airport Utility only the Express will show up. Currently, the Express has had it's IP set statically. The DHCP pool has been adjusted so 10.0.1.1 through 10.0.1.100 are available for manual use and the rest are DHCP, so there's no conflicts of IPs.
    Can anyone please help me? This functionality is pretty much the only reason I bought the Airport Extreme over a Linksys or D-Link box, and if I have to set the Express to remain solely a client and not extend the range, then the justification for the higher price of the Airport Extreme is void. I have reset the units in the past to no avail and as far as I can tell, they both have the latest firmware.
    Thanks in advance, Daniel

    Hi Macdanuk,
    I am having the same issue and have had it from the start.
    I use ADSL connected to airport extreme and then have 2 airport express units located around the premises.
    I have the issue whereby if one of the units are plugged out (power socket) and plugged back in, it can;t seem to reconnect. Eventually it will supply itself a IP. (in the 169.254.... range).
    The only way I can rectify the issue is to reconfigure the whole airport system and simply said, not plug out the airport express.
    I hope I can also find some assistance here as I think my problem is very similiar to yours.
    Regards,
    Grootbaas

  • Why will some CDs not work properly with my Macbook Pro with Retina display?

    I have the external CD drive for the Macbook Pro with Retina display, but I'm finding that some CDs will not run their applications properly. However, on the older editions of the Macbook Pro (for example, on the 13"), the programs run fine. Is there something I can download to fix this problem?

    When the MBP-R does not run CD applications "properly", what does it do?
    Is it possible that the applications that do not run properly are incompatible with Mountain Lion? For example, might they be old PowerPC applications that relied on Rosetta to run on Intel CPUs?

  • Why doesn't my camera work properly after backing up ISO7

    Can anyone tell me hy my camera will not work after updating to ISO7.0.3.  It appears in negative all the time.  Unable to see any adjustments on my settings.

    Nothing? Just left to resort to the 'geniuses'?

  • Satellite Pro L20 doesn't work properly with USB Fast Track audio i.f.

    Hello!
    I have used my Fast Track USB on new Toshiba Satellite L40 and I never had problems with it. I could set low latency and I did few songs with it.
    Yesterday I bought another notebook, thinking of home recording studio. It's used Toshiba Satellite Pro L20. It doesn't work properly with my interface. When I listen music on Winamp or do anything on Fruity Loops I hear loud clicks, pops, noises. They introduce samples, or they appear during playback or after a sample is stopped.
    I noticed, drivers for Satellite Pro L20 are a problem. Its not supported by Toshiba anymore?! The only drivers for chipset are very old and you can download em only from Toshiba website. The chipset is ATI Xpress 200M. Its drivers are with graphic card. Recently I noticed you can download "ATI Catalyst Legacy Display Driver for Windows XP - Motherboard/IGP Drivers 9.11" and CRACK IT to make it possible to install on mobile unit such as L20. Yep its funny but its impossible to do otherwise!
    things I have tried and they still not help:
    # drivers replacement, original were released in 2004. I installed recent version.
    # driver settings, low latency, high latency
    # asio and different settings
    # pluging the interface to another usb socket.
    # trying what happens when I use battery and when I use adapter
    # updated bios
    # turned off onboard units such as wifi card, sound card
    # checked IRQ list
    pops still appear.
    my config:
    Toshiba Satellite Pro L20
    Win XP Home SP3
    Celeron M 1,5GHz
    896Mb ram
    M-Audio Fast Track USB, drivers: 6.0.2
    Kind regards

    Thanks for answer. I still have L40 but I try to run my homerecording on L20. The L40 is now used by whole my family. It's possible to swap them but there's a problem - L20 has Norway keyboard and I'm the only person at home who doesn't often look down while typing. In Poland, we use standard ms keyboard. I'd buy special stickers, it's about only to make special chars get back to their places.
    I installed Windows on this computer end set it to best performance possible.
    Since I created this thread, guys from M-Audio support tried to solve my problem - nothing helped. I think potential solutions are exhausted.
    Message was edited by: lidia.pochron

  • Why isn't the scroll wheel working properly with Firefox 4?

    I have a new Windows 7 PC at work with Firefox 4 on it. The scroll wheel on my mouse is not working right. It will work if I use Internet Explorer but I have trouble getting it to work with Firefox. Usually what I have to do is click the wheel to get that mode of scrolling where you move the mouse up and down to scroll the screen and that will work. And then when I click the wheel again to get out of that mode, my scroll wheel will work as expected. But I don't want to have to do that all the time. And sometimes that trick doesn't work. The scroll wheel is working fine with MS Excel and Lotus Notes and Internet Explorer, etc, so it seems to be something the new Firefox has an issue with.

    I fixed my problem! I was messing around in msconfig to turn off Lync from my Startup list and noticed something called Mouse Suite 98 was in my Startup. I did a quick google check and learned I could remove it without doing any harm. And voila! My scrollwheel is working properly with Firefox, finally! Hope this helps someone out there.

  • Firefox from version 3.6 to 11 beta doesn't work properly with gmail

    Gmail doesn't work properly with any version of firefox from 3.6 to 11. I have tried several newer versions of firefox and they ALL DO NOT WORK PROPERLY with GMAIL!!!!!! THIS IS VERY FRUSTRATING & ANNOYING!! I can't click on any links or it just keeps saying LOADING when I try to delete a message or even go into the gmail settings.

    Try the Firefox SafeMode to see how it works there. <br />
    ''A troubleshooting mode, which disables most Add-ons.'' <br />
    ''(If you're not using it, switch to the Default Theme.)''
    * You can open the Firefox 4.0+ SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
    * Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
    ''Don't select anything right now, just use "Continue in SafeMode."''
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
    '''''If it is good in the Firefox SafeMode''''', your problem is probably caused by an extension, and you need to figure out which one. <br />
    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes
    ''When you figure out what is causing that, please let us know. It might help other user's who have that problem.''

  • I have laptop with digital persona (finger scanning) to automatic feed the passwords. it was working properly with the older version of firefox but is not working with the latest version of the firefox. why? give me a solution.

    i have laptop with digital persona (finger scanning) to automatic feed the passwords. it was working properly with the older version of firefox but is not working with the latest version of the firefox. why? give me a solution.

    Please authorize ADE 3 with same credentials that you used with older version of ADE

  • I had to restore my computer. After reinstalling itunes and sincronizing with my ipod, the music files were not organized in itunes as in the ipod: some songs were missing, some albums has no cover? Why is the sincronization not working properly?

    I had to restore my computer. After reinstalling itunes and sincronizing with my ipod, the music files were not organized in itunes as in the ipod: some songs were missing, some albums has no cover? Why is the sincronization not working properly?

    See Recover your iTunes library from your iPod or iOS device.
    tt2

  • Why can't I get open type features to work properly with an open type font on InDesign CS5.5?

    I installed a very complete set of styles of an opentype font with Font Book – Mac OS X 10.9.4 – but when I tried to format a sample text on InDesign CS5.5 I noticed that I could not use the opentype features on the Open Type menu as I usually do.
    Could anyone help me, please?

    It's ffScala Sans, but has separate files for small caps, figures, etc.
    I was trying to use small caps, lining figures and superscripts when I
    noticed none of the OT features are available.
    2014-07-30 21:56 GMT+01:00 Miguel Sousa <[email protected]>:
        Why can't I get open type features to work properly with an open type
    font on InDesign CS5.5?  created by Miguel Sousa
    <https://forums.adobe.com/people/MiguelSousa> in Adobe Type - View the
    full discussion <https://forums.adobe.com/message/6598614#6598614>

  • Some of my application in macbook pro doesn't work properly with Os Yosemite, such as dictionary and  MplayerX and etc

    I face to this problem since new OS, Yosemite has installed on my mac book
    some of my application in macbook pro doesn't work properly with Os Yosemite, such as dictionary (mac dictionary) and  MplayerX and etc
    For example when I make MplayerX and such application fullscreen the screen become white and just voice of video can be heard  or when I use Mac Dictionary (look-up dictionary) in any pages the meaning of work is not appear ( look at the picture above), so i need to directly open dictionary to find the meaning.
    Please help me
    tq

    Same thing here with MPlayerX (annoying)

Maybe you are looking for

  • Why won't it let me download apps?

    I just got my iphone 5s last night, and I proceeded to download all the apps I wanted until I came across one that said I needed to update, so I updated my phone and in the morning I downloaded that app and one more, after which when I tried to downl

  • To hide some headings in top of page during sorting of fields...

    dear experts, I have a report in which i am fetching multiple company codes in report and in o/p they are displayed according to company codes, but during sorting of any field in list i want to hide some of the headings in top of page...for any of th

  • I've bought a gift card but the code doesn't work. What do I have to do now?

    Somebody told me to send an email to Apple but I don't really know how. What should I say and where can I do that? Also, what should I write? I'd go back to the store but they couldn't do abything so they threw it away. That means I don't have the co

  • Exporting to PDF

    Post Author: nenders CA Forum: Crystal Reports Hello everyone: A coworker and I are writing code to run a Crystal report, then automatically submit the result to a fax machine. We're looking for help on how to specify PDF format in our code, since by

  • Creating a matrix in Forms

    Hi All, Can anyone help me out on this. I need to create a matrix in Forms 5.0 wherein the values in the block is the sum of 2 different values from 2 other blocks. Please help on this. Thanx Vikas null