Why doesn't SAF queue contain any messages?

Hi all
I've got a test business service which publishes to a JMS Queue. The queue is in the SAF Imported Destinations. I've paused this queue for forwarding but when I use SB console to test the business service, the message doesn't appear on the queue. No errors are reported in server log. Any help appreciated?

Hi,
I havent understood your use case.
assuming you have file stores ( or some kind of store) configured. Suggest take a look at file store associated to the JMS que you mentioned.
That store wil have message id and/or other information that would help understand the message had indeed reached the que . Follow that up with other logs and if needed enable JMS debug for more information.
Sri

Similar Messages

Why doesn't iMessage show when the message is read, all the time?

Why doesn't iMessage show when the message is read, all the time?

It depends on the recipients settings, whether they have read receipts set to on or off. If they have it off, you will not be notified of the actual time they read your message.

Why doesn't Apple mail download Gmail messages that were sent to myself?

When I e-mail myself to my Gmail address, the message sits in the Gmail inbox but Apple
Mail doesn't download it.
Mail downloads every other message in the Gmail inbox, but not the ones i've addressed to myself to my Gmail address.
Any ideas for why this is happening?

Gmail POP access doesn’t work like a normal POP mail server would. Here are some of its idiosyncrasies:
1. Messages downloaded by any conventional POP mail client are marked as downloaded at the server (but not as read on the web), and no longer available to either the same or any other POP mail client.
2. To make already downloaded messages available for POP access again, you must go to Gmail’s Settings > Forwarding and POP page, select Enable POP for all mail, and click Save Changes, which causes everything (and I mean everything) still on the server to be downloaded again.
3. The Mail > Preferences > Accounts > Advanced > Remove copy from server settings have absolutely no effect on the messages stored on Gmail’s server. Gmail ignores any requests to delete messages from the server made by a POP client. What happens to the messages on the server after a POP client has downloaded them is determined by Gmail’s Settings > Forwarding and POP > When messages are accessed with POP setting alone. In the case of Gmail (and only in that case), I recommend turning OFF Remove copy from server in Mail, so that Mail doesn’t even try to remove any messages from the server, regardless of whether you do actually want already downloaded messages to be removed from the server after some time or not.
4. Messages sent using the web interface will be downloaded by your POP mail client as if they were received messages. Although this may seem weird, it's good because it allows archiving all messages locally in Mail, regardless of how they were sent — as long as you don't access the same Gmail account with more than one POP mail client, that is. You can set up a rule in Mail to automatically route those messages to the appropriate Sent mailbox (or to any other mailbox for that matter) if that's what you want.
5. Messages sent using a POP/SMTP mail client such as Mail are also treated as if they were incoming messages for POP purposes, just as in #4. What prevents them from being downloaded is that Gmail marks them as already downloaded immediately. Since they’re on the server nonetheless, already sent messages would be downloaded together with all the other messages on the server if proceeding as described in #2.
6. A particular case of #5 are messages sent to yourself. Instead of putting a copy of the sent message in the server’s Inbox and making it available for download, both the sent and the “received” message on the server are actually one and the same, and hence, cannot be downloaded via POP for the reason explained in #5.
7. Gmail allows POP accounts to be set up in a special way that avoids some of these issues while introducing others. If you only need POP access to the last 30 days of mail, you may configure Mail in “recent mode”, as described in Using POP on multiple clients or mobile devices. Configuring the account this way would allow Mail to download messages marked by Gmail as already downloaded (and download messages sent to yourself in particular), but it would also cause all sent messages (not just messages sent to yourself or through webmail) to be downloaded as if they were received messages.

Why doesn't "safe mode" startup work with my iMac G5

I wanted to start up in "safe mode" but could get no further than the revolving gears under the Apple logo. My procedure: I pushed the power button, and as soon as I heard the startup chime I depressed the shift key on my keyboard and held it down. Instead of getting a blue screen I got nothing but the continuously revolving gears. Releasing the shift key at that point didn't do anything. I held the power button until the computer shut down and then restarted, this time without depressing the shift key. This resulted in a successful startup. But why couldn't I start in safe mode?
iMac G5 Mac OS X (10.4.6) 1.5G of RAM

Hi bruckner,
How long did you wait for? Safe Mode startups can take quite a while because the process checks and repairs the directories. See http://docs.info.apple.com/article.html?artnum=107394
Think about how long it can take to run DiskUtility to run "repair Disk" when booted from your OS DVD, especially if there are any problems or you have a lot of files on the disk. The process is essentially the same. It could easily take ten minutes or more in some circumstances if it has to do any repair work.
If you are confident that you waited long enough, then make sure that you have all peripherals except for your keyboard and mouse disconnected. They may be interfering with the boot process when their drivers are not present.
(You can release the "Shift" key as soon as the gears appear)
Cheers
Rod

Why doesn't Apple support iSync any more?

Apple hasn't added any additional cell phone support in iSync since 10.4 was released. If I want iSync support with my Verizon service, I have a choice of three phones (out of FIFTY) -- and two of those phones cost over $150, and the third is about as low-end as you can get. No Chocolate, no V-Cast, NOTHING. Apple wants the Mac to be the center of my digital lifestyle, so why isn't Apple working towards that goal?

"Apple hasn't added any additional cell phone support in iSync since 10.4 was released."
Yes, they have.
For Sony Ericsson phones, Mac OS X 10.4.3 added K750, D750, K600, W600 and Z520 support, Mac OS X 10.4.6 added W600 & W900 support, and Mac OS X 10.4.7 added Z530 & W810 support.
Many other manufacturers phones had support added in the iSync 2.2 and iSync 2.3 updates part of Mac OS X 10.4.6 and 10.4.7 respectively.
If Verizon offers a poor selection of phones, then maybe you should look for another network provider. Apple has no control over the handsets each network provider offers.
The LG Chocolate phone (like all other LG, Samsung etc.) phones uses a proprietary syncing protocol, unlike Nokia, Sony Ericsson and Motorola, who all use the industry standard SyncML.
You should direct your comments towards the mobile phone manufacturers who repeatedly refuse to build support for industry standards into thier phones, and refuse to provide Mac syncing support like they do for Windows.
Why do you think Apple should provide support for other manufacturers phones? Microsoft doesn't do it for Windows... the phone manufacturers do.
Apple have provided the system-level SyncServices framework which allows third-party device manufacturers to create iSync plugins for their phones. It is hardly Apple's fault if certain manufacturers choose not to.
So, complain to your network provider or phone manufacturer - not Apple.

Mail Doesn't let me send any messages..

Hi everyone,
First, I'd like to thank all of the people who dedicate their time to help us, Mac newbie.
Second, I have now, after updating into 10.4.8, two Mail.app problems.
The first problem is that every time I click on new message, I get this window http://img89.imageshack.us/img89/6791/picture1gv0.png as you see, the To, BC and BCC don't show up.
The second problem is that once I write the email address in this To section and then I click on Send, the new-message-window disappears, but the email never gets sent out.
Your help to solve those problem is really appreciated.
Regards,
Khaled

Hi Khaled.
It could be that the update wasn't installed properly.
Verify/repair the startup disk (not just permissions), as described here:
The Repair functions of Disk Utility: what's it all about?
After having fixed all filesystem issues, if any, reinstall the Combo Update for the type of computer and the version of Mac OS X you're using:
About the Mac OS X 10.4.8 Combo Update
Mac OS X 10.4.8 Combo Update for PPC
Mac OS X 10.4.8 Combo Update for Intel
Take a look at the following articles for guidelines on how to properly install system updates:
Troubleshooting installation and software updates
Installing software updates
Basically, you should verify/repair the startup disk before installing the update, no applications should be running while installing it, and you may experience unexpected results if you have third-party system software modifications (not normal applications) installed.
BTW, please update the Operating System field on your My Settings's profile (and click Save), so that it accurately reflects the version of Mac OS X you're using now.

Why doesn't Mail send from any of my three email addresses using OS X10.9.1

Outgoing mail just piles up. And why does it pile up in a directory called On My Mac?

Ignore the fact that I am now allanpeter1. I am beginning to hate OX 10.9.1 as I have had nothing but trouble ever since upgrading. This time I have been forced to re-register for discussions.apple.com. Another ID and another password to add to the list! However - I have My Connection doctor open in front of me (this email comes from an iPad which works OK). iCloud IMAP is green, and so is P&A Exchange (my work address). Cantab IMAP is red. For some reason which I do not understand I also have a mail.cantab.net:a.... SMPT which I have not created in Mail, but may have previously set up in Outlook 2011. I don't need it, but it won't go away. It is also red. Yesterday all four were green.
I do have a new message relating to my Cantab 'reds', namely that the system will not connect either server because the certificate is invalid. Since it wasn't invalid yesterday I am perplexed, and have contacted the cantab service provider who will, it is hoped, reply in due course and allow me to cross this little unexpected bridge and to see what problems are left.

Why doesn't the Jetpack send SMTP messages?

Is there anyone out there using a Jetpack to connect to an SMTP mail server?

I imagine your environment like this based on your description:
Probe ==?== PC ))) Jetpack ))) VZW ))) smtp.rushmore.com
Where:
=== = Cable
))) = Wireless
If your probe is connected via Ethernet to your PC then there may be some additional configurations necessary so that your PC can be on both the Ethernet cable network (unless its crossover?) and the Jetpacks WiFi network at the same time. Its not unusual for a PC to have 2 NICs (one wired and one wireless) but connecting to both at the same time is normally frowned on and causes issues.
Normally an Ethernet cabled device would have to go through a router to exist on the same network as a PC like this:
Probe === Router === Modem ))) VZW ))) smtp.rushmore.com
PC ))))))))) Router === Modem ))) VZW ))) smtp.rushmore.com
The first piece of the puzzle is to determine if your PC can email directly to smtp.rushmore.com or not. Start here with the usual Ping test and review that you have your email client/application configured correctly. Any email client would do to confirm a simple smtp email message can be sent/received from the PC.
If we cannot email to smtp.rushmore.com from the PC over the Jetpack then we need to dig into your PCs email settings and get him working.
After you confirm the PC can email the smtp server you would need to take a look at how your probe is connecting. Without any knowledge of what a Sensor Probe 4 device is my first assumption is that your PC is not able to auto forward the email information from the probe to the PC while the PC is also connected via WiFi. Your cabled network may be properly configured so that everything goes through a central router before hitting the modem.
Could you shoot me a link to your Security device so I can lookup a manual to see how it works?

Why doesn't the "grant execute any procedure" work?

Hi to all.
I want to grant the execute privilege for all SYS schema functions/procedures. To achieve it I do the following:
SQL> connect sys/*****@orcl
Connected to Oracle Database 10g Enterprise Edition Release 10.2.0.4.0
Connected as SYS
SQL> create user test identified by test;
User created
SQL> grant create session to test;
Grant succeeded
SQL> grant execute any procedure to test;
Grant succeeded
According to the [http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/statements_9013.htm] the "grant execute any procedure" - grants Execute procedures or functions, either standalone or packaged.
So, the steps seem to be right. Then, I try to connect to the test user and execute any procedure from the SYS schema, for example, dbms_lock.sleep:
SQL> connect test/test@dizzy/orcl
Connected to Oracle Database 10g Enterprise Edition Release 10.2.0.4.0
Connected as test
SQL> begin
2 sys.dbms_lock.sleep(1);
3 end;
4 /
begin
sys.dbms_lock.sleep(1);
end;
ORA-06550: line 3, column 1:
PLS-00201: identifier 'SYS.DBMS_LOCK' must be declared
ORA-06550: line 3, column 1:
PL/SQL: Statement ignored
So, the execution fails due to insufficient rights. However, the direct grant on the sys.dbms_lock works!
SQL> connect sys/*****@dizzy/orcl as sysdba
Connected to Oracle Database 10g Enterprise Edition Release 10.2.0.4.0
Connected as SYS
SQL> grant execute on dbms_lock; to test;
grant execute on dbms_lock; to test
ORA-00911: invalid character
SQL> grant execute on dbms_lock to test;
Grant succeeded
SQL> connect test/test@dizzy/orcl
Connected to Oracle Database 10g Enterprise Edition Release 10.2.0.4.0
Connected as test
SQL> begin
2 sys.dbms_lock.sleep(1);
3 end;
4 /
PL/SQL procedure successfully completed
So, to be sure that the grant on any procedure from the definite scheme is given, should I avoid giving the execute any procedure grant?
P.S. Is there any special tag for code?
Thanks in advance.

Sybrand, thank you for the reply.
You are right. I tried to connect by another user NOT SYS and created the function:
SQL> create user testic identified by i;
User created
SQL> grant create session, execute any procedure to testic;
Grant succeeded
SQL> create or replace function get1 return number is
2 begin
3 return 1;
4 end;
5 /
Function created
SQL> connect testic/i@orcl
Connected to Oracle Database 10g Enterprise Edition Release 10.2.0.4.0
Connected as testic
SQL> select get1 from dual;
select get1 from dual
ORA-00904: "GET1": invalid identifier
SQL> select kaisa_rgali.get1 from dual;
      GET1
         1Thank you for the tag. This's exactly what I asked about.
Finally, I tried t open the hyperlink http://download.oracle.com/docgs/cd/B10501_01/server.920/a96521/privs.htm but it failed.

Why doesn't my iphone receive any calls?

I bought an iphone 5 six months ago, and for the last 10 days it does not receive any calls. I can make calls, as well as receive and send SMS, and the wifi works... I've already restarted the iphone, reset network settings and replaced my chip... What can be wrong?

It's looking into the problem and will answer in the next five days... Anyhow, I was wondering if it might be a problem with the iphone itself...

Why doesn't Garage Band Make any sound anymore?

I recently installed Pro Tools to my Mac Mini and it works great but now when I try to run Garage band this what it says:
"GarageBand has detected a possible conflict between one or more third party MIDI or audio drivers.
(Be sure to install the latest drivers for all audio and MIDI equipment connected to your computer. For instructions on removing older drivers, consult the manufacturers' documentation.)"
I don't know what that means. All I know is that my Axiom 49 keyboard worked with Garage Band the day before yesterday and now it doesn't. How can I fix this without having to uninstall pro tools
Please help.

Look into your midi driver folder (HD/Library/Audio/Midi Drivers) and see what's in there. Try to at least temporarily move the files somewhere else and see if GB starts up without making a fuss!

Why doesn't windows list contain list of windows?

using version 34.0.5 on mac and with latest update I no longer have a list of open windows under the windows menu. How can I correct this ?

Hi ssymkens,
There is bug report for this problem, so it will hopefully be resolved soon:
https://bugzilla.mozilla.org/show_bug.cgi?id=1108802
In the meantime, until it's fixed you might find Firefox's tab groups a useful alternative:
[[Use Tab Groups to organize a lot of tabs]]
Alternatively, you might be able to switch between Firefox windows by right-clicking the Firefox icon on your dock, or by prssing Cmd+` on your keyboard.
(Cmd is the key that has a ⌘ symbol)
Hope this helps,
Jayelbe

Why doesn't my phone make any noises at all anymore, that includes music ,siri, and incoming calls???

I've gone to settings-sounds-Lock sounds and turned it on and tried it. I also tried to clean out all the port holes in the phone, and I have also messed with the side button to turn the volume up and down. Help me out Please!!!!!

cgoehner wrote:
I've gone to settings-sounds-Lock sounds and turned it on and tried it. I also tried to clean out all the port holes in the phone, and I have also messed with the side button to turn the volume up and down. Help me out Please!!!!!
You didn't mention the Mute switch above the volume buttons on the side.

Why doesn't icloud keep me logged in or remember me? I have to log in each time I re-open my browser.

Why doesn't Icloud remember me any more....it used to. Now I have to type in my user name and password each time I open the connection to icloud in Windows 7. What's up?

Websites remembering you and automatically log you in is stored in a cookie.
* Create an allow cookie exception (Tools > Options > Privacy > Cookies: Exceptions) to keep such a cookie, especially for secure websites and if cookies expire when Firefox is closed.
Make sure that you do not run Firefox in Private Browsing mode.
* https://support.mozilla.com/kb/Private+Browsing
* In [[Private Browsing]] mode all cookies are session cookies that expire if that session is ended, so websites won't remember you.
* Do not use [[Clear Recent History]] to clear the "Cookies" and the "Site Preferences"
Clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, and passwords.
* http://kb.mozillazine.org/Cookies

DataSocket JavaBean doesn't contain any beans. Why not?

I can't get my DataSocket JavaBean to install in my Java application. I can't find any classes and I try loading it into a Java BeanBox and it gives me the error that it doesn't contain any beans. Anyone know how to fix this or what I'm doing wrong? I need to be able to communicate between a Java Application and LabVIEW RT.

have you tried to import the whole class inot your bean application?

Why doesn't SAF queue contain any messages?

Similar Messages

Maybe you are looking for