Why Edge Inspect installation always fails?

We are in a subscription of Creative Suite. I'm trying to install Edge Inspect on my PC from this URL https://creative.adobe.com/products/inspect
but keep having an issue which you can see in the screenshot below.
How come it is not genuine? It's coming from your official page of Edge Inspect.
Can I ask on what should I do to install this?

Hi. Try following the instructions here: http://helpx.adobe.com/x-productkb/global/digital-certificate-revoked-aam.html
Let us know whether or not that works for you.
Thanks,
Mark

Similar Messages

  • Brand new 10.6.3 snow leopard disc installation always fails on MacBook pro

    So I ask, is the only thing left to do here to buy a new hard drive? I figured I would ask as I feel I have tried everything.
    I have a 17 inch 2.4 ghz intel core 2 duo MacBook pro with 4 gb ram and a 500 gb hitachi 7200 rpm hard drive that was installed in march of 2010. I was running osx snow leopard 10.6.3 with all updates with two partitions, a 450 gb for mac and 50 gb for bootcamp and windows 7. About 3 weeks ago, after downloading some programs from cnet, I started having problems. 
    I could not boot to the Mac side, but booting to windows was fine.  I would get hung on a blue screen with my cursor, but it never would go further. So I used
    my snow leopard 10.6.3 disc to run disk utility, repaired disk and it completed the repair and partitions, always leaving a note saying, " updating boot (something) as needed.  Everything repaired and was corrected, but I still could not boot to Mac. Still hung on blue screen.  I reset the PRAM, still nothing, but still no reoccurring errors in disc repair.
    So I purchased an external hd and backed up everything, since I never used time machine ( I know) and backed up all my data.  I erased and zero'd out everything on the Mac partition.  I then tried to reinstall 10.6.3 on the hard drive, and it seemed to fail repeatedly.  I would install, fail, reformat, repeat repeat over and over.  I was having trouble with the DVD drive taking the disc a few times, and noticed some very minor scratches on the disc, nothing major.  So, I decide it could be the disc, and went out to purchase one at best buy.  Came back, ready to go, took the disc the first time, and fails again and again. ( installation failed, please contact the software manufacturer )
    One thing I noticed in disc utility is that it would always seem to hang up installation around 6.65 gb. So I called my free 90 day software support from apple, and they of course suggested I take it to a Mac genius... Haven't been there yet because of the proximity to my house. I then decided to backup the bootcamp side , which was working just fine, and erased that as well,  I repartitioned the drive, erased the disc and tried again and again and installation kept failing. 
    Other things I have done, took out 2gb ram and tried, nothing.  Also changed a number in terminal that was 12000' to 30000' a tip from another forum, that also failed.  I am at wits end here, and can't find anyone else with this problem.  Any other suggestions before i scrap the hd?
    Thanks in advance for your advice,

    DVD drive ? The software disc itself is brand new and boots fine

  • Initial content installation always fails

    I have mountain lion 10.8.5 and recently updated safari to 6.1. After that, I bought/installed Logic Pro X. The initial software install went through fine, and then when I open the program for the first time, it downloads 2 GB of initial content. After the download, I am prompted for teh admin password, and the installation continues, but always fails with "the content download could not be completed". I have tried this several times over the past few days, same result every time.
    Has anyone seen this issue, and is there a solution?

    Yes.. there are several possible reasons for this..
    The common ones are;
    Your System disk has a permissions/disk error on it.. try repairing permissions and also use the disk utility to check and repair your system disk if needed..
    Make sure your Mac does not go to sleep during the process... Change the settings in System Preferences/Energy Saving to prevent this from happening, temporarily...
    Boot your Mac up in Safe Mode.... and try again.
    http://support.apple.com/kb/HT1455
    Finally you will find a thread here which contains lots of useful info on resolving this issue... (Including some of the above)
    If none of these fixes things for you then you may have to contact Apple directly and ask them to help you troubleshoot.. Remember, when you purchased Logic Pro X you got 90 days of free Applecare support for LPX so make use of it if needed
    http://www.apple.com/contact/
    Additional suggestion/possibiity
    This is not exactly common but I have come across it more often than one would think these days... and it is one that can often be overlooked...
    Your ISP doesn't allow you to download a single file larger than a certain size... Typically the Max File Size Limit is set to 2GB or in a few cases less... which can then result in the issue you are having...  Call your ISP to confirm/check or find a single, larger than say 2.5GB, file on the net somewhere that you can download and test..

  • The edge inspect installer is not shown

    I can't see the install file for edge inspect.  Can you anyone point me to the actual link to start the download
    thanks

    Hi,
    Sorry to hear about the inconvenience. Following ar ethe instructions to install Edge Inspect:
    1. Go to https://creative.adobe.com/apps (as you already have)
    2. Click On blue coloured 'Learn More' button below Edge Inspect
    3. You will be directed to link http://html.adobe.com/edge/inspect/
    4. Click on 'Get Started' on the page in Step 3
    5. If you are not signed in Creative Cloud, it should ask to sign in. If signed in - you will be directed to Creative cloud page
    6. Click on Ede Inspect app and  'Learn more' button one more time
    7. You shoud see the download instructions
    Please let us know if the instructions were useful and you are able to download Edge Inspect.
    Thanks,
    Archna

  • W520 - never fully restarts so installs always fail

    My w520 has been running fine for about two years, then today the Windows 8 install seemed to fail (after a restart, it tried to repair the OS, got in an enternal loop, then nothing). I tried a bunch of different things only to resolve that I needed to reinstall the OS. I've tried to do this now on three different drives but all fail the same way as follows:
    I can boot the Windows 8.1 (also tried Windows 8) installer from a bootable USB and start the install, but after the first initial steps (copy files, installing, installing features, instaslling packages), when it wants to restart, the w520 goes to a black screen (LCD still on, just black) and hangs for a long time (20 minutes+). I do a hard shutdown and then power it back up but the install tells me it fails and I have to do the install again.
    I've tried this on multiple drives and using both Windows 8.1 & Windows 8 using different install media & USB drives. Since i get the same result no matter the USB drive, media or target install drive, I suspect something else is failing. I've tried running the LINUX bootable diag... it shows some stuff that it appears to be running some tests, but the screen ultimately goes black (LCD off, but power still on) and doesn't come back.
    Ideas?
    AC
    ============
    ThinkPad w520 | Intel i7 2.5Ghz | 2x 512GB Crucial SSD | 16GB | NVIDIA GeForce Quadro 2000M 2GB | 6.9 Windows Exp Index
    Ultrabay DVD + modular Ultrabay 256GB Crucial SSD SATA
    Win7 Ultimate x64 | Windows Server 2008 R2 | Win8 Release Preview
    ThinkPad x200s | Core2 Duo 1.86 | 256GB Crucial SSD | 4GB | Intel Mobile Chipset Video | 3.4 Windows Exp. Index
    Win7 Ultimate x64 | Windows Server 2008 R2

    That's too bad... due to a project I'm on, I can't be without a machine. This laptop is 2+yrs old and was due for a refresh. With the w530 on a 4+ week shipping schedule and no solid eta for ordering the w540 (other than rumors of January 7, 2014), I got a MacBook Pro.
    The timing of this & the poor Lenovo options that resulted in me being without a machine for 1-2 months pushed this long time Lenovo customer elsewhere. The allure of a retina screen & the PCIeX SSD drive (which totally made up for the 16GB cap), not to mention 0.5" thinner & 1.5lbs lighter than the w530 pushed me to try the MBP (not to mention the 14day return policy that doesn't start until Christmas so I effectively get to try it out until January 7). If it doesn't cut it I can return it and order the w540...
    AC
    ============
    ThinkPad w520 | Intel i7 2.5Ghz | 2x 512GB Crucial SSD | 16GB | NVIDIA GeForce Quadro 2000M 2GB | 6.9 Windows Exp Index
    Ultrabay DVD + modular Ultrabay 256GB Crucial SSD SATA
    Win7 Ultimate x64 | Windows Server 2008 R2 | Win8 Release Preview
    ThinkPad x200s | Core2 Duo 1.86 | 256GB Crucial SSD | 4GB | Intel Mobile Chipset Video | 3.4 Windows Exp. Index
    Win7 Ultimate x64 | Windows Server 2008 R2

  • CS6 Master Collection installer constant fail

    I purchased CS6 Master Collection and, to save download time, the reseller (iSoftware) burnt it to disk for me. All four folders are now in a single folder on my desktop. I've tried "setup.exe" multiple times (in part 1) and the installer always fails at the same point.
    Yesterday I replaced Vista Business 64-bit with Win7 64-bit - same problem every time. The PDApp log states:
    [FATAL] DWANative - Error in mdbGetProductIDList 12
    .102 [FATAL] DeploymentNativeApplet The start applet did not return the result xml. StartApplet returned <error>Failed to open session</error>
    .102 [FATAL] Deployment.FetchMediaInformation Error in starting deployment native applet
    In case the DVD was faulty and was corrupt or missing a file I have also downloaded a replacement copy of part 1 from iSoftware - same result.
    Computer: PC - HP xw6400 Workstation
    Processors: 2 x Intel Xenon CPU E5345 - quad core with 8GB RAM
    OS : Win 7 64-bit
    I've run out of ideas and places to research. Where do I go from here?  All help gratefully received.
    MIKE

    download the proper installation files after cleaning your computer.
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  12 | 11, 10 | 9,8,7
    Lightroom:  5.6| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • Captivate message in Edge Inspect say 'user denied geolocation'?

    When I try to view a project from Captivate in Edge Inspect on my PC I get a message that says 'user denied geolocation'

    I watched the Dr. Pooja video where she explains how to use Edge Inspect. Her instructions were at such a high level and lacking important details it made me wonder if she has ever used Edge Inspect with Captivate herself.
    I finally found this
    Adobe® Edge Inspect Installation Guide
    which explains in detail what needs to be done.
    After following the instructions in the Edge Inspect Installation Guide, I was finally able to view my Captivate project on my iPhone.

  • Captivate 8: Edge Inspect not finding devices

    Using Windows desktop computer running Windows 7 Ultimate and Captivate 8 and trying to preview in Edge Inspect. I have a MacBook Pro laptop booted to the Mac OS, and an iPhone, that are connected to my network. I know they are connected to my network because I'm able to browse and receive email on those devices.
    The Edge Inspect plug in is installed in Chrome, but when I click the Edge Inspect icon in Chrome, I get a "Waiting for a connection..." message that never goes away, and the MacBook Pro and iPhone devices never appear.
    There must be a place to specify which devices I want to preview. What do I need to do to preview at least my iPhone in Edge Inspect? (Once I know how to do that, I also want to preview the project on my iPad.)

    I watched the Dr. Pooja video where she explains how to use Edge Inspect. Her instructions were at such a high level and lacking important details it made me wonder if she has ever used Edge Inspect with Captivate herself.
    I finally found this
    Adobe® Edge Inspect Installation Guide
    which explains in detail what needs to be done.
    After following the instructions in the Edge Inspect Installation Guide, I was finally able to view my Captivate project on my iPhone.

  • Why do Extension Manager "updates" always fail to "update"?

    Why to Extension Manager "updates" always fail to "update"?

    What's your current Extension Manager version (6.0.X or 7.0.X or ...)? What's your OS (Windows 7 or Mac)?
    If you are using Extension Manager CS6, the simplest way is to delete the EM installation folder manually, then download the latest full installer from http://www.adobe.com/exchange/em_download/em6_download.html and install it, then you will have the latest update.
    For Extension Manager CC, please go to "C:\Program Files (x86)\Common Files\Adobe\Installers" (Windows 7) or "/Library/Logs/Adobe/Installers" (Mac) and send the installer log file (The file name is something like "Adobe Extension Manager CC 7.1.1 12-16-2013.log.gz") to [email protected] so that we can check it.

  • System Image Utility always fails, why?

    Hi everyone,
    on my clean and fresh install of 10.7.4 Server the System Image Utility always fails to create an image. I want to create a NetInstall image and have put the OS X Lion Installer in /Applications. I can select it in SIU and choose to create a NetInstall image. It asks for the admin pw and always presents an error at the very end: Image creation failed. An unknown error has occured.
    If I select to create a NetBoot image instead it fails directly after clicking on the Create button with this slightly different message: Image creation failed. An error has occured. At least it’s no unknown error…
    Any ideas what might be causing this? I have succesfully created NetInstall images with 10.6 Server and 10.8 Server, but 10.7 Server somehow won’t play nice.
    Thanks
    Björn

    Hi Brian,
    I first deleted the Installer and redownloaded it from the App Store, just to make sure there was no problem with it. Even though I now have the 10.7.4 Installer (had 10.7.0 before) nothing has changed. I then went on to set the log level as suggested. I now get different errors based on the chosen log level.
    Log level set to debug:
    Image creation failed.
    *** -[__NSArrayM insertObject:atIndex:]: object cannot be nil
    Log level set to verbose:
    Image creation failed.
    An unknown error has occurred.
    I did not see anything helpful in the logs unfortunately. The only noticeable thing mentioned was: Failed to create image from installer media.
    Any additional ideas? I will attach both logs here, just in case.
    VERBOSE LOG:
    Starting image creation.
    Workflow Started (2012-09-08 14:08:00 +0200)
    Mac OS X Server 10.7.4 (11E53), System Image Utility 10.7.3 (543)
    Starting action: Define Image Source (1.3)
    Finished running action: Define Image Source
    Starting action: Create Image (1.6.2)
    Starting image creation process...
    Create NetInstall Image
    Initiating NetInstall from Installer media.
    Creating working path at /Users/vm/Desktop/NetInstall of Install Mac OS X Lion
    Creating disk image (Size: 4062 MB)
    Finalizing disk image.
    created: /Users/vm/Desktop/NetInstall of Install Mac OS X Lion/NetInstall.dmg
    Attaching disk image
    Copying /Volumes/Mac OS X Install ESD
    Preparing the kernel and boot loader for the boot image
    /Users/vm/Desktop/NetInstall of Install Mac OS X Lion/i386
    /Users/vm/Desktop/NetInstall of Install Mac OS X Lion/i386/x86_64
    Copying /Volumes/Mac OS X Install ESD/boot.efi
    Copying /Volumes/Mac OS X Install ESD/System/Library/CoreServices/PlatformSupport.plist
    Performing post install cleanup
    Detaching disk image
    "disk4" unmounted.
    "disk4" ejected.
    Correcting permissions. 501:20 /Users/vm/Desktop/NetInstall of Install Mac OS X Lion
    Script is done.
    Failed to create image from installer media.
    An unknown error has occurred.
    NetInstall creation failed.
    Image creation process finished...
    Stopping image creation.
    Image creation failed.
    DEBUG LOG:
    Starting image creation.
    Workflow Started (2012-09-08 13:59:22 +0200)
    Mac OS X Server 10.7.4 (11E53), System Image Utility 10.7.3 (543)
    Starting action: Define Image Source (1.3)
    Finished running action: Define Image Source
    Starting action: Create Image (1.6.2)
    Starting image creation process...
    Create NetInstall Image
    Initiating NetInstall from Installer media.
    progressPrefix="_progress"
    ++ progressPrefix=_progress
    scriptsDebugKey="DEBUG"
    ++ scriptsDebugKey=DEBUG
    imageIsUDIFKey="1"
    ++ imageIsUDIFKey=1
    mountPoint=""
    ++ mountPoint=
    ownershipInfoKey="501:20"
    ++ ownershipInfoKey=501:20
    destVolFSType="HFS+"
    ++ destVolFSType=HFS+
    installSource="/Volumes/Mac OS X Install ESD"
    ++ installSource='/Volumes/Mac OS X Install ESD'
    dmgTarget="NetInstall"
    ++ dmgTarget=NetInstall
    destPath="/Users/vm/Desktop/NetInstall of Install Mac OS X Lion"
    ++ destPath='/Users/vm/Desktop/NetInstall of Install Mac OS X Lion'
    dmgVolName="NetInstall"
    ++ dmgVolName=NetInstall
    . "${1}/createCommon.sh"
    + . /tmp/niutemp.Yv8Z6Mqx/createCommon.sh
    # createCommon.sh
    # Common functionality for the Image creation process.
    # sourced in by the various SIU scripts
    # Copyright © 2007-2011 Apple Inc. All rights reserved.
    # Using dscl, create a user account
    AddLocalUser()
    # $1 volume whose local node database to modify
    # $2 long name
    # $3 short name
    # $4 isAdminUser key
    # $5 password data
    # $6 password hint
    # $7 user picture path
    # $8 Language string
    local databasePath="/Local/Default/Users/${3}"
    local targetVol="${1}"
    # Find a free UID between 501 and 599
    for ((i=501; i<600; i++)); do
    output=`/usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -search /Local/Default/Users UniqueID $i`
    # If there is already an account dscl returns it, so we're looking for an empty return value.
    if [ "$output" == "" ]; then
    break
    fi
    done
    # Create the user record
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -create $databasePath
    if [ $? != 0 ]; then
    echo "Failed to create '${databasePath}'."
    return 1
    fi
    # Add long name
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath RealName "${2}"
    if [ $? != 0 ]; then
    echo "Failed to set the RealName."
    return 1
    fi
    # Add PrimaryGroupID
    if [ "${4}" == 1 ]; then
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath PrimaryGroupID 80
    else
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath PrimaryGroupID 20
    fi
    if [ $? != 0 ]; then
    echo "Failed to set the PrimaryGroupID."
    return 1
    fi
    # Add UniqueID
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath UniqueID ${i}
    if [ $? != 0 ]; then
    echo "Failed to set the UniqueID."
    return 1
    fi
    # Add Home Directory entry
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath NFSHomeDirectory /Users/${3}
    if [ $? != 0 ]; then
    echo "Failed to set the NFSHomeDirectory."
    fi
    if [ "${6}" != "" ]; then
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath AuthenticationHint "${6}"
    if [ $? != 0 ]; then
    echo "Failed to set the AuthenticationHint."
    return 1
    fi
    fi
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath picture "${7}"
    if [ $? != 0 ]; then
    echo "Failed to set the picture."
    return 1
    fi
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -passwd $databasePath "${5}"
    if [ $? != 0 ]; then
    echo "Failed to set the passwd."
    return 1
    fi
    # Add shell
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath UserShell "/bin/bash"
    if [ $? != 0 ]; then
    echo "Failed to set the UserShell."
    return 1
    fi
    # Create Home directory
    if [ -e "/System/Library/User Template/${8}.lproj/" ]; then
    /usr/bin/ditto "/System/Library/User Template/${8}.lproj/" "${targetVol}/Users/${3}"
    else
    /usr/bin/ditto "/System/Library/User Template/English.lproj/" "${targetVol}/Users/${3}"
    fi
    if [ $? != 0 ]; then
    echo "Failed to copy the User Template."
    return 1
    fi
    /usr/sbin/chown -R $i:$i "${targetVol}/Users/${3}"
    if [ $? != 0 ]; then
    echo "Failed to set ownership on the User folder."
    return 1
    fi
    # Copies a list of files (full paths contained in the file at $1) from source to the path specified in $2
    CopyEntriesFromFileToPath()
    local theFile="$1"
    local theDest="$2"
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    opt="-v"
    fi
    while read FILE
    do
    if [ -e "${FILE}" ]; then
    local leafName=`basename "${FILE}"`
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Copying ${FILE}."
    fi
    /usr/bin/ditto $opt "${FILE}" "${theDest}/${leafName}" || return 1
    fi
    done < "${theFile}"
    return 0
    # Copies a list of packages (full path, destination pairs contained in the file at $1) from source to .../System/Installation/Packages/
    CopyPackagesWithDestinationsFromFile()
    local theFile="$1"
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    opt="-v"
    fi
    while read FILE
    do
    if [ -e "${FILE}" ]; then
    local leafName=`basename "${FILE}"`
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Copying ${FILE}."
    fi
    read SUB_PATH
    /usr/bin/ditto $opt "${FILE}" "${mountPoint}/Packages/${SUB_PATH}${leafName}" || return 1
    fi
    done < "${theFile}"
    return 0
    # Create an installer package in ${1} wrapping the supplied script ${2}
    CreateInstallPackageForScript()
    local tempDir="$1"
    local scriptPath="$2"
    local scriptName=`basename "${scriptPath}"`
    local entryDir=`pwd`
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Create installer for script ${scriptName}"
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    opt="-v"
    fi
    fi
    # shouldn't exist on entry...
    if [ -e "${tempDir}/emptyDir" ]; then
    /bin/rm -rf "${tempDir}/emptyDir"
    fi
    # make some directories to work in
    /bin/mkdir $opt -p "${tempDir}/${scriptName}.pkg/Contents/Resources" || return 1
    /bin/mkdir $opt "${tempDir}/emptyDir" || return 1
    # Create Archive.pax.gz
    cd "${tempDir}/emptyDir"
    /bin/pax -w -x cpio -f "${tempDir}/${scriptName}.pkg/Contents/Archive.pax" .
    /usr/bin/gzip "${tempDir}/${scriptName}.pkg/Contents/Archive.pax"
    cd "${entryDir}"
    # Create the Archive.bom file
    /usr/bin/mkbom "${tempDir}/emptyDir/" "${tempDir}/${scriptName}.pkg/Contents/Archive.bom" || return 1
    # Create the Info.plist
    /bin/cat > "${tempDir}/${scriptName}.pkg/Contents/Info.plist" << END
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    <key>CFBundleIdentifier</key>
    <string>com.apple.server.SystemImageUtility.${scriptName}</string>
    <key>CFBundleShortVersionString</key>
    <string>1</string>
    <key>IFMajorVersion</key>
    <integer>1</integer>
    <key>IFMinorVersion</key>
    <integer>0</integer>
    <key>IFPkgFlagDefaultLocation</key>
    <string>/tmp</string>
    <key>IFPkgFlagInstallFat</key>
    <false/>
    <key>IFPkgFlagIsRequired</key>
    <false/>
    <key>IFPkgFormatVersion</key>
    <real>0.10000000149011612</real>
    </dict>
    </plist>
    END
    echo "pkmkrpkg1" > "${tempDir}/${scriptName}.pkg/Contents/PkgInfo"
    echo "major: 1\nminor: 0" > "${tempDir}/${scriptName}.pkg/Contents/Resources/package_version"
    # Copy the script
    /bin/cp "$scriptPath" "${tempDir}/${scriptName}.pkg/Contents/Resources/postflight"
    # clean up
    /bin/rm -r "${tempDir}/emptyDir"
    return 0
    # Validate or create the requested directory
    CreateOrValidatePath()
    local targetDir="$1"
    if [ ! -d "${targetDir}" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Creating working path at ${targetDir}"
    fi
    /bin/mkdir -p "${targetDir}" || return 1
    fi
    # If any exist, apply any user accounts
    CreateUserAccounts()
    # $1 volume whose local node database to modify
    local count="${#userFullName[*]}"
    local targetVol="${1}"
    if [ $count -gt 0 ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Adding $count user account(s) to the image"
    fi
    for ((index=0; index<$count; index++)); do
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Adding user ${userFullName[$index]}"
    fi
    #lay down user here
    AddLocalUser "${targetVol}" "${userFullName[$index]}" "${userUnixName[$index]}" "${userIsAdmin[$index]}" "${userPassword[$index]}" "${userPassHint[$index]}" "${userImagePath[$index]}" "${userLanguage[$index]}"
    if [ $? != 0 ]; then
    echo "Failed to create the User '${userUnixName[$index]}'."
    return 1
    fi
    done
    # "touch"
    /usr/bin/touch "${targetVol}/private/var/db/.AppleSetupDone"
    /usr/bin/touch "${targetVol}/Library/Receipts/.SetupRegComplete"
    fi
    # retry the hdiutil detach until we either time out or it succeeds
    retry_hdiutil_detach()
    local mount_point="${1}"
    local tries=0
    local forceAt=0
    local limit=24
    local opt=""
    forceAt=$(($limit - 1))
    while [ $tries -lt $limit ]; do
    tries=$(( tries + 1 ))
    /bin/sleep 5
    echo "Attempting to detach the disk image again..."
    /usr/bin/hdiutil detach "${mount_point}" $opt
    if [ $? -ne 0 ]; then
    # Dump a list of any still open files on the mountPoint
    if [ "${scriptsDebugKey}" == "DEBUG" ]; then
    /usr/sbin/lsof +fg "${mount_point}"
    fi
    if [ $tries -eq $forceAt ]; then
    echo "Failed to detach disk image at '${mount_point}' normally, adding -force."
    opt="-force"
    fi
    if [ $tries -eq $limit ]; then
    echo "Failed to detach disk image at '${mount_point}'."
    exit 1
    fi
    else
    tries=$limit
    fi
    done
    # Create the dyld shared cache files
    DetachAndRemoveMount()
    local theMount="${1}"
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Detaching disk image"
    # Dump a list of any still open files on the mountPoint
    if [ "${scriptsDebugKey}" == "DEBUG" ]; then
    /usr/sbin/lsof +fg "${theMount}"
    fi
    fi
    # Finally detach the image and dispose the mountPoint directory
    /usr/bin/hdiutil detach "${theMount}" || retry_hdiutil_detach "${theMount}" || return 1
    /bin/rmdir "${theMount}" || return 1
    return 0
    # If the pieces exist, enable remote access for the shell image
    EnableRemoteAccess()
    local srcVol="${1}"
    local opt=""
    if [ -e "${srcVol}/usr/lib/pam/pam_serialnumber.so.2" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Enabling shell image remote access support"
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    opt="-v"
    fi
    fi
    # install some things (again which aren't part of BaseSystem) needed for remote ASR installs
    /usr/bin/ditto $opt "${srcVol}/usr/lib/pam/pam_serialnumber.so.2" "${mountPoint}/usr/lib/pam/pam_serialnumber.so.2" || return 1
    if [ -e "${srcVol}/usr/sbin/installer" ]; then
    /usr/bin/ditto $opt "${srcVol}/usr/sbin/installer" "${mountPoint}/usr/sbin/installer" || return 1
    fi
    # copy the sshd config and add our keys to the end of it
    if [ -e "${srcVol}/etc/sshd_config" ]; then
    /bin/cat "${srcVol}/etc/sshd_config" - > "${mountPoint}/etc/sshd_config" << END
    HostKey /private/var/tmp/ssh_host_key
    HostKey /private/var/tmp/ssh_host_rsa_key
    HostKey /private/var/tmp/ssh_host_dsa_key
    END
    fi
    fi
    return 0
    # If it exists, install the sharing names and/or directory binding support to the install image
    HandleNetBootClientHelper()
    local tempDir="${1}"
    local targetVol="${2}"
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    opt="-v"
    fi
    if [ -e  "${tempDir}/bindingNames.plist" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Installing Directory Service binding information"
    fi
    /usr/bin/ditto $opt "${tempDir}/bindingNames.plist" "${targetVol}/etc/bindingNames.plist" || return 1
    /usr/sbin/chown root:wheel "${targetVol}/etc/bindingNames.plist"
    /bin/chmod 644 "${targetVol}/etc/bindingNames.plist"
    fi
    if [ -e  "${tempDir}/sharingNames.plist" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Installing Sharing Names support"
    fi
    /usr/bin/ditto $opt "${tempDir}/sharingNames.plist" "${targetVol}/etc/sharingNames.plist" || return 1
    /usr/sbin/chown root:wheel "${targetVol}/etc/sharingNames.plist"
    /bin/chmod 644 "${targetVol}/etc/sharingNames.plist"
    fi
    if [ -e  "${tempDir}/NetBootClientHelper" ]; then
    /usr/bin/ditto $opt "${tempDir}/NetBootClientHelper" "${targetVol}/usr/sbin/NetBootClientHelper" || return 1
    /usr/sbin/chown root:wheel "${targetVol}/usr/sbin/NetBootClientHelper"
    /bin/chmod 555 "${targetVol}/usr/sbin/NetBootClientHelper"
    /usr/bin/ditto $opt "${tempDir}/com.apple.NetBootClientHelper.plist" "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist" || return 1
    /usr/sbin/chown root:wheel "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist"
    /bin/chmod 644 "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist"
    # finally, make sure it isn't disabled...
    /usr/libexec/PlistBuddy -c "Delete :com.apple.NetBootClientHelper" "${targetVol}/var/db/launchd.db/com.apple.launchd/overrides.plist" > /dev/null 2>&1
    fi
    return 0
    # If any exist, install configuration profiles to the install image
    InstallConfigurationProfiles()
    local tempDir="${1}"
    local targetVol="${2}"
    local profilesDir="${targetVol}/var/db/ConfigurationProfiles"
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    opt="-v"
    fi
    if [ -e  "${tempDir}/configProfiles.txt" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Installing Configuration Profiles"
    fi
    /bin/mkdir -p "${profilesDir}/Setup" || return 1
    # Make sure the perms are correct
    /usr/sbin/chown root:wheel "${profilesDir}"
    /bin/chmod 755 "${profilesDir}"
    /usr/sbin/chown root:wheel "${profilesDir}/Setup"
    /bin/chmod 755 "${profilesDir}/Setup"
    /usr/bin/touch "${profilesDir}/.profilesAreInstalled"
    CopyEntriesFromFileToPath "${tempDir}/configProfiles.txt" "${profilesDir}/Setup" || return 1
    # Enable MCX debugging
    if [ 1 == 1 ]; then
    if [ -e  "${targetVol}/Library/Preferences/com.apple.MCXDebug.plist" ]; then
    /usr/libexec/PlistBuddy -c "Delete :debugOutput" "${targetVol}/Library/Preferences/com.apple.MCXDebug.plist" > /dev/null 2>&1
    /usr/libexec/PlistBuddy -c "Delete :collateLogs" "${targetVol}/Library/Preferences/com.apple.MCXDebug.plist" > /dev/null 2>&1
    fi
    /usr/libexec/PlistBuddy -c "Add :debugOutput string -2" "${targetVol}/Library/Preferences/com.apple.MCXDebug.plist" > /dev/null 2>&1
    /usr/libexec/PlistBuddy -c "Add :collateLogs string 1" "${targetVol}/Library/Preferences/com.apple.MCXDebug.plist" > /dev/null 2>&1
    fi
    fi
    # Converts a list of scripts (full paths contained in the file at $1) into packages in $3
    InstallScriptsFromFile()
    local tempDir="${1}"
    local theFile="${2}"
    local targetDir="${3}"
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Converting scripts into install packages"
    fi
    while read FILE
    do
    if [ -e "${FILE}" ]; then
    # make an installer package out of the script
    CreateInstallPackageForScript "$tempDir" "${FILE}" || return 1
    # copy the resulting package to the Packages directory
    local leafName=`basename "${FILE}"`
    /usr/bin/ditto $opt "${tempDir}/${leafName}.pkg" "${targetDir}/${leafName}.pkg" || return 1
    # clean up
    /bin/rm -r "${tempDir}/${leafName}.pkg"
    fi
    done < "${theFile}"
    return 0
    # Prepare the source by deleting stuff we don't want to copy if sourcing a volume
    PostFlightDestination()
    local tempDir="${1}"
    local destDir="${2}"
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Performing post install cleanup"
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ] ; then
    opt="-v"
    fi
    fi
    # delete the DS indices to force reindexing...
    if [ -e "${mountPoint}/var/db/dslocal/indices/Default/index" ]; then
    /bin/rm $opt "${mountPoint}/var/db/dslocal/indices/Default/index"
    fi
    # detach the disk and remove the mount folder
    DetachAndRemoveMount "${mountPoint}"
    if [ $? != 0 ]; then
    echo "Failed to detach and clean up the mount at '${mountPoint}'."
    return 1
    fi
    echo "Correcting permissions. ${ownershipInfoKey} $destDir"
    /usr/sbin/chown -R "${ownershipInfoKey}" "$destDir"
    # Prepare the source by deleting stuff we don't want to copy if sourcing a volume
    PreCleanSource()
    local srcVol="$1"
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ] ; then
    opt="-v"
    fi
    fi
    if [ -e "$srcVol/private/var/vm/swapfile*" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Removing swapfiles on $1"
    fi
    /bin/rm $opt "$srcVol/private/var/vm/swapfile*"
    fi
    if [ -d "$srcVol/private/tmp" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Cleaning out /private/tmp on $1"
    fi
    /bin/rm -r $opt "$srcVol/private/tmp/*"
    fi
    if [ -d "$srcVol/private/var/tmp" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Cleaning out /private/var/tmp on $1"
    fi
    /bin/rm -r $opt "$srcVol/private/var/tmp/*"
    fi
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Cleaning out devices and volumes on $1"
    fi
    if [ -d "$srcVol/Volumes" ]; then
    /bin/rm -r $opt "$srcVol/Volumes/*"
    fi
    if [ -d "$srcVol/dev" ]; then
    /bin/rm $opt "$srcVol/dev/*"
    fi
    if [ -d "$srcVol/private/var/run" ]; then
    /bin/rm -r $opt "$srcVol/private/var/run/*"
    fi
    # Copy kernel and build the kext cache on the boot image
    PrepareKernelAndKextCache()
    local srcDir="$1"
    local destDir="$2"
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Preparing the kernel and kext cache for t          /bin/rmdir "${theMount}" || return 1
    return 0
    # If the pieces exist, enable remote access for the shell image
    EnableRemoteAccess()
    local srcVol="${1}"
    local opt=""
    if [ -e "${srcVol}/usr/lib/pam/pam_serialnumber.so.2" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Enabling shell image remote access support"
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    opt="-v"
    fi
    fi
    # install some things (again which aren't part of BaseSystem) needed for remote ASR installs
    /usr/bin/ditto $opt "${srcVol}/usr/lib/pam/pam_serialnumber.so.2" "${mountPoint}/usr/lib/pam/pam_serialnumber.so.2" || return 1
    if [ -e "${srcVol}/usr/sbin/installer" ]; then
    /usr/bin/ditto $opt "${srcVol}/usr/sbin/installer" "${mountPoint}/usr/sbin/installer" || return 1
    fi
    # copy the sshd config and add our keys to the end of it
    if [ -e "${srcVol}/etc/sshd_config" ]; then
    /bin/cat "${srcVol}/etc/sshd_config" - > "${mountPoint}/etc/sshd_config" << END
    HostKey /private/var/tmp/ssh_host_key
    HostKey /private/var/tmp/ssh_host_rsa_key
    HostKey /private/var/tmp/ssh_host_dsa_key
    END
    fi
    fi
    return 0
    # If it exists, install the sharing names and/or directory binding support to the install image
    HandleNetBootClientHelper()
    local tempDir="${1}"
    local targetVol="${2}"
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    opt="-v"
    fi
    if [ -e  "${tempDir}/bindingNames.plist" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Installing Directory Service binding information"
    fi
    /usr/bin/ditto $opt "${tempDir}/bindingNames.plist" "${targetVol}/etc/bindingNames.plist" || return 1
    /usr/sbin/chown root:wheel "${targetVol}/etc/bindingNames.plist"
    /bin/chmod 644 "${targetVol}/etc/bindingNames.plist"
    fi
    if [ -e  "${tempDir}/sharingNames.plist" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Installing Sharing Names support"
    fi
    /usr/bin/ditto $opt "${tempDir}/sharingNames.plist" "${targetVol}/etc/sharingNames.plist" || return 1
    /usr/sbin/chown root:wheel "${targetVol}/etc/sharingNames.plist"
    /bin/chmod 644 "${targetVol}/etc/sharingNames.plist"
    fi
    if [ -e  "${tempDir}/NetBootClientHelper" ]; then
    /usr/bin/ditto $opt "${tempDir}/NetBootClientHelper" "${targetVol}/usr/sbin/NetBootClientHelper" || return 1
    /usr/sbin/chown root:wheel "${targetVol}/usr/sbin/NetBootClientHelper"
    /bin/chmod 555 "${targetVol}/usr/sbin/NetBootClientHelper"
    /usr/bin/ditto $opt "${tempDir}/com.apple.NetBootClientHelper.plist" "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist" || return 1
    /usr/sbin/chown root:wheel "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist"
    /bin/chmod 644 "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist"
    # finally, make sure it isn't disabled...
    /usr/libexmountPoint=`mktemp -d "/tmp/mnt.XXXXXXXX"`
    errExit()
    echo "Execution of '`basename ${0}`' failed. Cleaning up."
    # detach the disk and remove the mount folder
    DetachAndRemoveMount "${mountPoint}"
    /bin/rm -r "${destPath}"
    exit 1
    # Set up for script debugging
    debug_opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ] ; then
    debug_opt="-v"
    fi
    # Prepare the destination
    CreateOrValidatePath "$destPath" || errExit
    # update progress information
    echo "${progressPrefix}_creatingImage_"
    if [ -e "${installSource}/BaseSystem.dmg" ]; then
    size=$2
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ] ; then
    echo "Creating disk image (Size: $size MB)"
    fi
    /usr/bin/hdiutil create "$destPath/$dmgTarget" -megabytes $size -volname "${dmgVolName}" -uid 0 -gid 80 -mode 1775 -layout "SPUD" -fs "$destVolFSType" -stretch 500g -ov -puppetstrings || errExit
    echo "${progressPrefix}_copyingSource_"
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ] ; then
    echo "Attaching disk image"
    fi
    /usr/bin/hdiutil attach "${destPath}/${dmgTarget}.dmg" -owners on -nobrowse -noautoopen -mountpoint "${mountPoint}" -quiet || errExit
    # Copy source Volume base system to
    /usr/bin/ditto $debug_opt "${installSource}" "${mountPoint}" || errExit
    else
    echo "This does not appear to be a Mac OS X Install DVD."
    errExit
    fi
    # If adding any additional packages or scripts
    if [ -e "${1}/OSInstall.collection" ]; then
    /usr/bin/ditto $debug_opt "${1}/OSInstall.collection" "${mountPoint}/Packages/OSInstall.collection" || errExit
    /usr/sbin/chown root:wheel "${mountPoint}/Packages/OSInstall.collection"
    # If adding any additional packages
    if [ -e "${1}/additionalPackages.txt" ]; then
    CopyPackagesWithDestinationsFromFile "${1}/additionalPackages.txt" || errExit
    fi
    # If adding any scripts
    if [ -e "${1}/additionalScripts.txt" ]; then
    InstallScriptsFromFile "${1}" "${1}/additionalScripts.txt" "${mountPoint}/Packages" || errExit
    fi
    fi
    # If it exists, install the partition data onto the install image
    ProcessAutoPartition "${1}" || errExit
    # If it exists, install minstallconfig.xml (AutoInstall data) onto the install image
    ProcessMinInstall "${1}" || errExit
    # update progress information
    echo "${progressPrefix}_buildingBooter_"
    # Copy kernel and boot loader
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Preparing the kernel and boot loader for the boot image"
    fi
    # make sure this doesn't exist
    if [ -e "${destPath}/i386" ]; then
    /bin/rm -rf "${destPath}/i386"
    fi
    /bin/mkdir -p $debug_opt "${destPath}/i386/x86_64" || errExit
    # copy these directly off the install media
    /usr/bin/ditto $debug_opt "${installSource}/boot.efi" "${destPath}/i386/booter" || errExit
    /usr/bin/chflags nohidden "${destPath}/i386/booter"
    # Grab the relevant portion of the com.apple.Boot.plist
    kernelFlags=`/usr/libexec/PlistBuddy -c "print :'Kernel Flags'" "${installSource}/Library/Preferences/SystemConfiguration/com.apple.Boot.plist"`
    /usr/libexec/PlistBuddy -c "add :'Kernel Flags' string ${kernelFlags}" "${destPath}/i386/com.apple.Boot.plist" > /dev/null 2>&1
    /usr/bin/ditto $debug_opt "${installSource}/System/Library/CoreServices/PlatformSupport.plist" "${destPath}/i386/PlatformSupport.plist" || errExit
    # extract the kernel & kernelcache for the boot shell
    /usr/bin/lipo -extract i386 "${mountPoint}/kernelcache" -output "${destPath}/i386/kernelcache" || errExit
    /usr/bin/lipo -extract x86_64 "${mountPoint}/kernelcache" -output "${destPath}/i386/x86_64/kernelcache" || errExit
    # Apply choice changes, if any
    if [ -e "${1}/MacOSXInstaller.choiceChanges" ]; then
    echo "Copy over package choice selection."
    /usr/bin/ditto $debug_opt "${1}/MacOSXInstaller.choiceChanges" "${mountPoint}/Packages/Extras/MacOSXInstaller.choiceChanges"
    fi
    # update progress information
    echo "${progressPrefix}_finishingUp_"
    # perform the final cleanup
    PostFlightDestination "${1}" "$destPath" || errExit
    errExit
    Vol/private/tmp" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Cleaning out /private/tmp on $1"
    fi
    /bin/rm -r $opt "$srcVol/private/tmp/*"
    fi
    if [ -d "$srcVol/private/var/tmp" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Cleaning out /private/var/tmp on $1"
    fi
    /bin/rm -r $opt "$srcVol/private/var/tmp/*"
    fi
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Cleaning out devices and volumes on $1"
    fi
    if [ -d "$srcVol/Volumes" ]; then
    /bin/rm -r $opt "$srcVol/Volumes/*"
    fi
    if [ -d "$srcVol/dev" ]; then
    /bin/rm $opt "$srcVol/dev/*"
    fi
    if [ -d "$srcVol/private/var/run" ]; then
    /bin/rm -r $opt "$srcVol/private/var/run/*"
    fi
    # Copy kernel and build the kext cache on the boot image
    PrepareKernelAndKextCache()
    local srcDir="$1"
    local destDir="$2"
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Preparing the kernel and kext cache for tPERCENT:0.000000
    PERCENT:4.332841
    PERCENT:8.985722
    PERCENT:12.358444
    PERCENT:14.524864
    PERCENT:16.617430
    PERCENT:19.522402
    PERCENT:21.614967
    PERCENT:23.535204
    PERCENT:26.070902
    PERCENT:29.271296
    PERCENT:33.111767
    PERCENT:38.847858
    PERCENT:42.343674
    PERCENT:44.707043
    PERCENT:46.578041
    PERCENT:49.138355
    PERCENT:51.772526
    PERCENT:55.563763
    PERCENT:58.567207
    PERCENT:62.210735
    PERCENT:64.795670
    PERCENT:69.719353
    PERCENT:74.741508
    PERCENT:77.055641
    PERCENT:79.591331
    PERCENT:83.013290
    PERCENT:85.548988
    PERCENT:88.010834
    PERCENT:91.728210
    PERCENT:97.710487
    PERCENT:100.000000
    PERCENT:-1.000000
    Finalizing disk image.
    created: /Users/vm/Desktop/NetInstall of Install Mac OS X Lion/NetInstall.dmg
    /bin/rmdir "${theMount}" || return 1
    return 0
    # If the pieces exist, enable remote access for the shell image
    EnableRemoteAccess()
    local srcVol="${1}"
    local opt=""
    if [ -e "${srcVol}/usr/lib/pam/pam_serialnumber.so.2" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Enabling shell image remote access support"
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    opt="-v"
    fi
    fi
    # install some things (again which aren't part of BaseSystem) needed for remote ASR installs
    /usr/bin/ditto $opt "${srcVol}/usr/lib/pam/pam_serialnumber.so.2" "${mountPoint}/usr/lib/pam/pam_serialnumber.so.2" || return 1
    if [ -e "${srcVol}/usr/sbin/installer" ]; then
    /usr/bin/ditto $opt "${srcVol}/usr/sbin/installer" "${mountPoint}/usr/sbin/installer" || return 1
    fi
    # copy the sshd config and add our keys to the end of it
    if [ -e "${srcVol}/etc/sshd_config" ]; then
    /bin/cat "${srcVol}/etc/sshd_config" - > Creating working path at /Users/vm/Desktop/NetInstall of Install Mac OS X Lion
    Creating disk image (Size: 4062 MB)
    /tmp/ssh_host_dsa_key
    END
    fi
    fi
    return 0
    # If it exists, install the sharing names and/or directory binding support to the install image
    HandleNetBootClientHelper()
    local tempDir="${1}"
    local targetVol="${2}"
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    opt="-v"
    fi
    if [ -e  "${tempDir}/bindingNames.plist" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Installing Directory Service binding information"
    fi
    /usr/bin/ditto $opt "${tempDir}/bindingNames.plist" "${targetVol}/etc/bindingNames.plist" || return 1
    /usr/sbin/chown root:wheel "${targetVol}/etc/bindingNames.plist"
    /bin/chmod 644 "${targetVol}/etc/bindingNames.plist"
    fi
    if [ -e  "${tempDir}/sharingNames.plist" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Installing Sharing Names support"
    fi
    /usr/bin/ditto $opt "${tempDir}/sharingNames.plist" "${targetVol}/etc/sharingNames.plist" || return 1
    /usr/sbin/chown root:wheel "${targetVol}/etc/sharingNames.plist"
    /bin/chmod 644 "${targetVol}/etc/sharingNames.plist"
    fi
    if [ -e  "${tempDir}/NetBootClientHelper" ]; then
    /usr/bin/ditto $opt "${tempDir}/NetBootClientHelper" "${targetVol}/usr/sbin/NetBootClientHelper" || return 1
    /usr/sbin/chown root:wheel "${targetVol}/usr/sbin/NetBootClientHelper"
    /bin/chmod 555 "${targetVol}/usr/sbin/NetBootClientHelper"
    /usr/bin/ditto $opt "${tempDir}/com.apple.NetBootClientHelper.plist" "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist" || return 1
    /usr/sbin/chown root:wheel "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist"
    /bin/chmod 644 "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist"
    # finally, make sure it isn't disabled...
    /usr/libex
    # update progress information
    echo "${progressPrefix}_creatingImage_"
    if [ -e "${installSource}/BaseSystem.dmg" ]; then
    size=$2
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ] ; then
    echo "Creating disk image (Size: $size MB)"
    fi
    /usr/bin/hdiutil create "$destPath/$dmgTarget" -megabytes $size -volname "${dmgVolName}" -uid 0 -gid 80 -mode 1775 -layout "SPUD" -fs "$destVolFSType" -stretch 500g -ov -puppetstrings || errExit
    echo "${progressPrefix}_copyingSource_"
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ] ; then
    echo "Attaching disk image"
    fi
    /usr/bin/hdiutil attach "${destPath}/${dmgTarget}.dmg" -owners on -nobrowse -noautoopen -mountpoint "${mountPoint}" -quiet || errExit
    # Copy source Volume base system to
    /usr/bin/ditto $debug_opt "${installSource}" "${mountPoint}" || errExit
    else
    echo "This does not appear to be a Mac OS X Install DVD."
    errExit
    fi
    # If adding any additional packages or scripts
    if [ -e "${1}/OSInstall.collection" ]; then
    /usr/bin/ditto $debug_opt "${1}/OSInstall.collection" "${mountPoint}/Packages/OSInstall.collection" || errExit
    /usr/sbin/chown root:wheel "${mountPoint}/Packages/OSInstall.collection"
    # If adding any additional packages
    if [ -e "${1}/additionalPackages.txt" ]; then
    CopyPackagesWithDestinationsFromFile "${1}/additionalPackages.txt" || errExit
    fi
    # If adding any scripts
    if [ -e "${1}/additionalScripts.txt" ]; then
    InstallScriptsFromFile "${1}" "${1}/additionalScripts.txt" "${mountPoint}/Packages" || errExit
    fi
    fi
    # If it exists, install the partition data onto the install image
    ProcessAutoPartition "${1}" || errExit
    # If it exists, install minstallconfig.xml (AutoInstall data) onto the install image
    ProcessMinInstall "${1}" || errExit
    # update progress information
    echo "${progressPrefix}_buildingBooter_"
    # Copy kernel and boot loader
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Preparing the kernel and boot loader for the boot image"
    fi
    # make sure this doesn't exist
    if [ -e "${destPath}/i386" ]; then
    /bin/rm -rf "${destPath}/i386"
    fi
    /bin/mkdir -p $debug_opt "${destPath}/i386/x86_64" || errExit
    # copy these directly off the install media
    /usr/bin/ditto $debug_opt "${installSource}/boot.efi" "${destPath}/i386/booter" || errExit
    /usr/bin/chflags nohidden "${destPath}/i386/booter"
    # Grab the relevant portion of the com.apple.Boot.plist
    kernelFlags=`/usr/libexec/PlistBuddy -c "print :'Kernel Flags'" "${installSource}/Library/Preferences/SystemConfiguration/com.apple.Boot.plist"`
    /usr/libexec/PlistBuddy -c "add :'Kernel Flags' string ${kernelFlags}" "${destPath}/i386/com.apple.Boot.plist" > /dev/null 2>&1
    /usr/bin/ditto $debug_opt "${installSource}/System/Library/CoreServices/PlatformSupport.plist" "${destPath}/i386/PlatformSupport.plist" || errExit
    # extract the kernel & kernelcache for the boot shell
    /usr/bin/lipo -extract i386 "${mountPoint}/kernelcache" -output "${destPath}/i386/kernelcache" || errExit
    /usr/bin/lipo -extract x86_64 "${mountPoint}/kernelcache" -output "${destPath}/i386/x86_64/kernelcache" || errExit
    # Apply choice changes, if any
    if [ -e "${1}/MacOSXInstaller.choiceChanges" ]; then
    echo "Copy over package choice selection."
    /usr/bin/ditto $debug_opt "${1}/MacOSXInstaller.choiceChanges" "${mountPoint}/Packages/Extras/MacOSXInstaller.choiceChanges"
    fi
    # update progress information
    echo "${progressPrefix}_finishingUp_"
    # perform the final cleanup
    PostFlightDestination "${1}" "$destPath" || errExit
    rrExit
    # Apply choice changes, if any
    if [ -e "${1}/MacOSXInstaller.choiceChanges" ]; then
    echo "Copy over package choice selection."
    /usr/bin/ditto $debug_opt "${1}/MacOSXInstaller.choiceChanges" "${mountPoint}/Packages/Extras/MacOSXInstaller.choiceChanges"
    fi
    # update progress information
    echo "${progressPrefix}_finishingUp_"
    # perform the final cleanup
    PostFlightDestination "${1}" "$destPath" || errExit
    tDestination "${1}" "$destPath" || errExit
    errExit
    Vol/private/tmp" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Cleaning out /private/tmp on $1"
    fi
    /bin/rm -r $opt "$srcVol/private/tmp/*"
    fi
    if [ -d "$srcVol/private/var/tmp" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Cleaning out /private/var/tmp on $1"
    fi
    /bin/rm -r $opt "$srcVol/private/var/tmp/*"
    fi
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Cleaning out devices and volumes on $1"
    fi
    if [ -d "$srcVol/Volumes" ]; then
    /bin/rm -r $opt "$srcVol/Volumes/*"
    fi
    if [ -d "$srcVol/dev" ]; then
    /bin/rm $opt "$srcVol/dev/*"
    fi
    if [ -d "$srcVol/private/var/run" ]; then
    /bin/rm -r $opt "$srcVol/private/var/run/*"
    fi
    # Copy kernel and build the kext cache on the boot image
    PrepareKernelAndKextCache()
    local srcDir="$1"
    local destDir="$2"
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    Stopping image creation.
    Terminating script!
    Image creation failed.

  • Problème installation "disque local" - Edge Inspect

    Adobe Edge Inspect - "The installation directory must be on a local hard drive"
    Hello,
    I would like to install Adobe Edge Inspect,
    but I have this error message "The installation directory must be on a local hard drive"
    But the path is C: \ Program Files (x86) \ Adobe \ Adobe Edge Inspect \
    and the file exists.
    I'm running windows 7 64 bit
    I try 'safe mode' but nothing to do.
    any solution for my problem?
    Bonjour,
    je voudrais installer Adobe Edge Inspect,
    mais j'ai ce message d'erreur "le repertoire d'installation doit se situer sur un disque dur local"
    pourtant le chemin est bien C:\Program Files (x86)\Adobe\Adobe Edge Inspect\
    et le dossier existe.
    Je suis sous windows 7 64 bits
    j'ai essayer en 'mode sans échec' mais rien à faire.
    quelle solution pour mon problème ?

    Bonjour Mark,
    Merci pour votre aide.
    j'ai suivi le tuto qur le lien que vous m'avez indiquer et maintenant Edge Inspect est installer sur mon pc avec succè.
    Cela a aussi fonctionner avec l"apllication 'Adobe Edge Code Preview 3'
    Encore merci.
    Vadim
    Hello Mark,
    Thank you for your help.
    I followed the tutorial qur the link you gave me and now indicate Inspect Edge is installed on my pc with success.
    It also work with the "Apllication Adobe Edge Preview 3 Code '
    Thank you again.
    Vadim

  • Installation of Adobe Premiere Elements 12 always fails

    During the installation of my Adobe Premiere Elements 12, I always receive an error message (during the processing of linked components) which says:" During the installation an error has occured."
    I have purchased Adobe Premiere Elements online and use the appropriate key provided by the retailer.
    My Adobe Premiere Elements 10 works fine though but I would rather like to get my new program going.
    I have tried all Adobe error correction proposels already but unfortunately in vain.
    Any suggestions how to proceed?

    Thanks for your fast reply. I have already solved the problem and everything works fine.
    Von: kglad [email protected]
    Gesendet: Donnerstag, 28. November 2013 15:48
    An: Weblogger
    Betreff: Installation of Adobe Premiere Elements 12 always fails
    Re: Installation of Adobe Premiere Elements 12 always fails
    created by kglad <http://forums.adobe.com/people/kglad>  in Downloading, Installing, Setting Up - View the full discussion <http://forums.adobe.com/message/5882899#5882899

  • WSUS 3.0 SP2 installation is always failed.

    Hi All
    I follow the steps of
    uninstall WSUS directly and then install the WSUS again, Unfortunately it always failed with this error message:
    "Windows Server Update Services 3.0 SP2 could not install Windows Internal Database. For more information, see the Setup log "C:\Users\ADMINI~1\AppData\Local\Temp\2\WSUSSetup.log".
    Error Log is:
    2014-05-12 19:29:49  Success   MWUSSetup          Validating pre-requisites...
    2014-05-12 19:29:49  Error     MWUSSetup          Failed to determine if an higher version of WSUS is installed. Assuming it is not... (Error 0x80070002: The system cannot find the file specified.)
    2014-05-12 19:29:49  Error     MWUSSetup          WSUS is outdated. But this will not block setup (Error 0x00000000: The operation completed successfully.)
    2014-05-12 19:29:54  Success   MWUSSetup          Initializing installation details
    2014-05-12 19:29:54  Success   MWUSSetup          Skipping Asp.Net install since not running on win2k3...
    2014-05-12 19:29:54  Success   MWUSSetup          Installing wYukon using ocsetup
    2014-05-12 19:29:54  Success   MWUSSetup          Installing Windows Internal database using ocsetup with command line as "ocsetup "WSSEE" /quiet /norestart"
    2014-05-12 19:29:56  Error     MWUSSetup          The process ocsetup "WSSEE" /quiet /norestart returned error: 0x643 (Error 0x80070643: Fatal error during installation.)
    2014-05-12 19:29:56  Error     MWUSSetup          ExecCmd failed (Error 0x80070643: Fatal error during installation.)
    2014-05-12 19:29:56  Error     MWUSSetup          Install Windows Internal database: Failed to execute "ocsetup "WSSEE" /quiet /norestart" (Error 0x80070643: Fatal error
    during installation.)
    2014-05-12 19:29:56  Error     MWUSSetup          CInstallDriver::PerformSetup: Installation of wYukon failed (Error 0x80070643: Fatal error during installation.)
    2014-05-12 19:29:56  Error     MWUSSetup          CSetupDriver::LaunchSetup: Setup failed (Error 0x80070643: Fatal error during installation.)
    2014-05-12 19:29:57  Error     MWUSSetup          DoInstall: Wsus setup failed (Error 0x80070643: Fatal error during installation.)
    MANY THANKS
    包山包海的工作

    Hi,
    Have you tried this sticky thread,
    how to uninstall WSUS?
    This article discussed how to uninstall WSUS completely.
    And someone fixed this error via KB971187
    http://support.microsoft.com/kb/971187
    Hope this helps.

  • Why do i always fail to run: RSPC_API_CHAIN_START

    Dear All,
    Do u ever have this problem?
    I have an external program (Ms. Excel) having objective to run RFC.
    The RFC is to run function : RSPC_API_CHAIN_START (running Process Chain).
    But why for login ID for my user always fail to run it. I think it's regarding authorization, but i've already checked it out by t-code SU53, i still get no clues from there.
    And i've already tried to debug, i just got this error:
    error code: 022
    error msg: RSPC
    And i've already checked it out to t-code ST22, i also found nothing.
    Do you know what authorization i should be giving to that login ID ??
    Do you know how to trace it ??
    Best regards,
    Niel.

    Tks for ur response..
    I execute it from Ms. Office Excel.
    This excel call RFC, where the RFC call FM: RSPC_API_CHAIN_START.
    The abnormal one, my login id (developer user-id) capable to run smoothly (from Ms. Office Excel).
    But when i tried use my client login id, it is unable to run it.
    I've also tried to use our client login id to run the RFC by t-code se37 (i asked basis team to grant that authorization), but when i run it, i still get the error, and after i check by t-code SU53, i still can't get any clues there.
    Do u have any idea ??
    Best regards,
    Niel.

  • HT5022 When I tried installing this software, I get this error:  "The installer encountered an error that caused the installation to fail.  contact the software manufacturer for assistance."  Any idea why?  My computer is Mac OS X Version 10.7.5

    When I tried installing this software, I get this error:  "The installer encountered an error that caused the installation to fail.  contact the software manufacturer for assistance."  Any idea why?  My computer is Mac OS X Version 10.7.5

    What software are you trying to install?

Maybe you are looking for