Why editing iview id break the delta link in the portal page?

For some reason, everytime I edit the iview id, the delta link in the page will be broken.
After I changed the iview id, the iview id that I added as delta link in portal page remain same, and seems like become a separate copy , rather than the original delta link.
This frustracted me as I have to remove the old iview , and add the new edited iview into the page again.
Why is this happen? (I am very sure I didn't accidentally add the iview as copy, instead of delta link)
By the way, I am in NW04s SP9.
Thanks for help.
Kent

Hi Kent,
> (I am very sure I didn't accidentally
> add the iview as copy, instead of delta link)
The wording "I am very sure" points to the fact that you didn't really check and re-try it?!
I just checked it on NW04 / SPS18 (which corresponds to SP09 on NW2004s) - and it works like a charme. The delta-link on the test page points to the new ID (as the ID-Change-Wizard announces it).
As I have no 2004s installation at hand, I would suggest really to re-check if you are really talking of a delta-link. If it really doesn't work on SP09 while it works on SP18 in parallel, you would have to open an OSS message. Anyhow, this really should behave analogously...
Hope it helps
Detlev

Similar Messages

  • Role upload does not change the delta links

    Hi,
    We are using the Role upload functionality in the portal to upload BW roles by selecting the "Convert roles to worksets" and "Overwrite existing content" options.
    The newly created workset (corresponding to the uploaded role) is then copied and pasted as a delta link in another folder.
    We upload the BW role again whenever some changes are made to the original BW role (such as addition/deletion of reports).
    However, these changes are not getting reflected in the delta link (although the delta link dependency still exists).
    Does delta link work only for manual deletion/addition of portal content and the changes do not filter through using a role upload with overwrite?
    It is definitely not working for us using the role upload functionality and It seems that overwriting content using role upload does not impact the associated delta links.
    Any solution/workaround to this issue would be greatly appreciated.
    Regards,
    Vibhu

    Hi Vibhu,
    > Good to hear from you after such a long time
    Yeah, I didn't had that much time the last months, but at the moment, I'm trying to be back a bit
    > We investigated the problem further and found that it is only the deletions to a
    > BW role in the backend that do not get reflected in the delta link.
    >
    > The additions work fine.
    > It is defintely a bug.
    So it's up to SAP to fix it - and you could mark the thread as closed?!
    Best regards
    Detlev

  • How to find the Delta Linked iView's Origin ?

    Hello all,
    How r u ?
    We found some new Delta Linked iViews in the Workset, but these iViews are not available in the Portal Content under the mentioned Folder. How do we find the origin of that iView ?
    Best Regards....
    Sankar Kumar
    +91 98403 47141

    Hi Maran,
    Please follow these,
      Content Admin -> Open your Workset.
    Now your workset will display names of the iView that assiged to that workset.
    If the iview is copied without delta link means that will mentioned as<b> (changed)</b> near by the iView Name.
       Example: Content Admin -> Open your Workset Object
             <MyWorkSet>
    > MyiView1
    > MyiView2(changed)    [This means this iView copied w.o Deltalink)
    > MyiView3
    Here MyiView1,MyiView3 are deltalinked iViews.
    Regards,
    <b>Ramganesan K</b>

  • Why do I not get the checkout option for a pdf type document when clicking on the document link in the SharePoint workflow task?

    We are trying to use workflows to review and edit pdf files in sharepoint 2010. We are having a couple of issues and am hoping someone has the answer.....
    1)  When myself and coworkers click on the pdf document in the library, we get the check out option as expected.  However when we click on the document
    link in a workflow task (on the sharepoint site), the pdf opens as a temporary file and we do not get the check out option.  Why does this happen????? 
    2)  The same thing happens when we click on the document link in the workflow task email;   HOWEVER,  one of our co-workers does get the
    check out option when clicking on the link in the email task.  Why would she get the checkout option using the email and not when clicking on the link in the task list on the sharepoint site ????  We have compared our internet settings and adobe
    settings to ours and found no differences.
    We are using Sharepoint 2010, Windows 7, IE8, Adobe Reader X or XI.  Some of us have Adobe Pro X and have the same issues.

    Hi,
    According to your post, my understanding is that you could not get the checkout option for a pdf type document when clicking on the document link in the SharePoint workflow task.
    I try to reproduce the issue, however, no matter when I click the pdf type document in the library or click on the pdf document link in the workflow task email, it download the pdf doucment and then I can open it.
    It will be better if you can descript how you
    get the check out option as expected when you click on the pdf document in the library.
    Then I upload a
    word type document to the library, no matter when I click the word type document in the library or click on the word document link in the workflow task email, I can open the word document directly and get the check out option as expected.
    I recommend to use the other type docuemts to check whether the check out option works.
    Thank you for your understanding.
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • Why do I not get the checkout option when clicking on the document link in the SharePoint workflow task?

    We are trying to use workflows to review and edit pdf files in sharepoint 2010. We are having a couple of issues and am hoping someone has the answer.....
    1)  When myself and coworkers click on the pdf document in the library, we get the check out option as expected.  However when we click on the document link in a workflow task (on the sharepoint site), the pdf opens as a temporary file and we do not get the check out option.  Why does this happen????? 
    2)  The same thing happens when we click on the document link in the workflow task email;   HOWEVER,  one of our co-workers does get the check out option when clicking on the link in the email task.  Why would she get the checkout option using the email and not when clicking on the link in the task list on the sharepoint site ????  We have compared our internet settings and adobe settings to ours and found no differences.
    We are using Sharepoint 2010, Windows 7, IE8, Adobe Reader X or XI.  Some of us have Adobe Pro X and have the same issues.

    No the person who can check out using the link in the email has the same permissions as me.  We have looked at all kinds of settings, profile etc and nothing evident can be determined to explain the reason.  However, one difference we did notice is that this person does not have a default web browser set and thus when clicking on items to open, it always pops up a dialog box asking which program to use to open it with.  This person chooses Adobe Reader and it opens on the Sharepoint server as it should and she gets the checkout option in a dialog box just like clicking on the document in the library.  My theory is that this step of choosing the program to open with is interrupting the typical way a pdf file is handled when clicking on URL links to the document, which is…. it is opened as temporary internet file rather than on the Sharepoint server.   Hopefully someone can figure this out ☺

  • Have a nice day. I can't open the books linked to the Adobe ID. Always the overallocation says. But some of the books I downloaded two times. Still, it gives a warning in the form of more installations.

    Have a nice day. I can't open the books linked to the Adobe ID. Always the overallocation says. But some of the books I downloaded two times. Still, it gives a warning in the form of more installations.

    I think you should ask in the Digital Editions forum, Adobe Digital Editions

  • How to delete the delta queue in the ECC

    Hi everyone!
    After I tryed to save a new Infopackage and I have the error :
    (Deltas already loaded for request REQU_41Q82WJLR9AZCE9ZMKQLVG3RG init. selection; no 2. init
    Message no. RSM1071
    Diagnosis
    Deltas have already been loaded for the init. selection of request REQU_41Q82WJLR9AZCE9ZMKQLVG3RG. A second initialization is therefore not possible with these selection conditions.
    Procedure
    If you want to carry out a new initialization, you have to choose selections that do not overlap.
    If you want to repeat the init. for the same selection, you have to delete the delta queue in the source system, and restart the delta process.
    As the error says - Deltas have already been loaded for the init. selection.
    Can you please give me some links/guids which describes how to  delete the delta queue in the source system, and restart the delta process.
    thank you, Ron

    Hi,
    Assuming as you need to the reinit for same selections.
    in such case you need to delete old init.
    how to delete init:
    Go to your info pack screen, menu Scheduler--> initialization options for source system--> here you can see the existing init, select init(green) and delete it.
    Later you can trigger your init info pack with selections.
    Thanks

  • The Help Link from the Application Pages Does not Work for Peoplesoft Campus Solutions 9.0

    Hi everyone.
    I have a problem, I have been trying to set up the Help Link from the Application Pages for Peoplesoft Campus Solutions 9.0 according to the instructions given in the Document: http://docs.oracle.com/cd/E17566_01/epm91pbr0/eng/psbooks/EnablingtheHelpLinkfromApplicationPages.pdf ,  (referenced in the Doc ID 1289101.1, E-PB: How to Set Up the Context Sensitive Help with Hosted PeopleBooks using Universal Linking).
    I follow the instructions of that document carefully:
    I go to: PeopleTools -> Web Profile -> Web Profile Configuration
        2. Then I choose the Web Profile: "Development".
        3. Then Change the value for the Help URL field by entering the following URL format: http://www.oracle.com/pls/topic/lookup?id=%CONTEXT_ID%&ctx=hrcs90r5 , the ctx parameter selected is the one that correspond to  the Campus Solutions (hrcs90r5) according to the Product Line Code Table (ULinkID) especified in the mentioned document.
        4. Stop the Web Domain and Clear cache.
        5. Start the Web Domain again.
    After setting up the Web Profile Configuration I test the help links, thas is why I click in the Help link in any Peoplesoft CS 9.0 Application Page (modify a person), but the next error message appears: "We're sorry, the topic you requested was not found.".
    I tried many combinations with the ctx parameters URL but it does not work yet. 
    I did the same test, but this time using the Help URL field with a HRMS ctx parameter by entering the following URL format: http://www.oracle.com/pls/topic/lookup?id=%CONTEXT_ID%&ctx=hcm92pbr5 , and It works fine !!!
    According to the previous test you realize that It works with HRMS ctx parameter but not with Campus Solutions 9.0 ctx parameter,  Does anybody know what else can I do ? Am I doing anything wrong or missing? or maybe the Oracle's ctx parameter for Campus Solutions URL It is broken simply.
    Thanks for you help and feedback.

    2799444 - The page you are testing with appears to be a Workforce Administration page. Is that correct?
    The CS PeopleBooks would only work for CS pages, e.g.: try navigating to Main Menu > Campus Community > Personal Information > Add/Update a Person
    Also, you can use multiple ctx parameters:
    E.g.: http://www.oracle.com/pls/topic/lookup?id=%CONTEXT_ID%&ctx=hrcs90r5&ctx=hcm92pbr5&ctx=pt852pbh2
    This way the help would work for the HR related pages like Workforce Administration, Campus Solutions pages like Campus Community and also PeopleTools pages like Web Profile Configuration. Hope this clarifies your question. Thanks!

  • Display image from the save link in the field

    Hi all,
    I have a image link that saved in a column and will like this picture to be displayed once user is click on the image link in the tabular format.
    However, now I am facing the problem to perform query of the record because one of the field type is image or ole. However, if I changed the image link to normal text item. I am able to perform query search on the record. My question is, can I click on the record whenever I want to see the image from the tabular form ? I prefer tabular form as I can see a lot of records in one sort. But for the image display, I will like user to clock on the specific link in order to open up the image.
    Will this possible ?
    Thanks
    Lim

    If you are saving the image path in table not the image then why don't you use the READ_IMAGE_FILE built-in (see forms help).
    What i mean is hide the actual item which is having the image location. Just create one image item from toolbar (non-database) and create one extra button in the same block to display the image then use the READ_IMAGE_FILE built-in as below in WHEN-BUTTON-PRESS-TRIGGER...
    READ_IMAGE_FILE(:path_item_name,NULL,'image_item_name');
    Preferred way would be to save the image in database then query in your form using database image.
    -Ammad

  • I was doing some thing on my mac and the normal link to the applications folder from the bottom right hand corner disappeared, I cant find it anywhere, Can you help me?

    I was doing some thing on my mac and the normal link to the applications folder from the bottom right hand corner disappeared, I cant find it anywhere, Can you help me?

    Simple process. If an iPhone go to the Apple Store and not Verizon
    the phone from Verizon will be a refurbished device and not new unless under the 14 day worry free guarantee
    good luck

  • How Can I Remove the Home Link on the Main Page

    I am using PT 8.49 and I am creating a custom page where the only options I'd like to show on the page are my custom menu option and "Sign out" at the top right. I'd like to remove the "Home" link on the top right menu because I am doing the selection for them. I don't want them to be able to go back to the Home menu once they've entered my custom page. I have everything working the way I'd like except that I cannot get rid of the "Home" link. Can anyone help with that?
    I am also using a template in portal called HOMEPAGE_DESIGNER_TEMPLATE as this causes the page to display without the left menu, as I want it to be.
    Thanks for your help!

    Restore the default home page
    * https://support.mozilla.com/en-US/kb/How%20to%20set%20the%20home%20page#w_restore-the-default-home-page
    Now, set a single web site as your home page
    * https://support.mozilla.com/en-US/kb/How%20to%20set%20the%20home%20page#w_set-a-single-web-site-as-your-home-page
    Check and tell if its working.

  • Is there a way to remove my facebook contacts from my phone contacts list?  I had an iphone 4 and it was easy to shut off from teh contacts through the groups link at the top left, but the iphone 5s does not have this feature nor can i figure it out throu

    Is there a way to remove my facebook contacts from my phone contacts list?  I had an iphone 4 and it was easy to shut off from teh contacts through the groups link at the top left, but the iphone 5s does not have this feature nor can i figure it out through the settings feature or anything else....HELP please as it is annoying to see all of these contacts!

    Hello ymprice91277, let's solve this mystery! To unlink the Facebook contacts go to Settings, Facebook, turn off contacts.
    WiltonA_VZW
    VZW Support
    Follow us on twitter @VZWSupport

  • Need to get the download link of the software

    Hi team,
    I will be getting the available patches which is released by Microsoft, from that I would be filtering the patches which I would like to use for my system an application but the reference link only takes to the information of the article rather than providing
    me the download link, can you kindly help me or suggest a way how to get the download link of the article.
    eg:microsot.com/ kb/981574#
    for this article how do I find the download link

    Download the one that is relevant to your system and your region
    https://connect.microsoft.com/VisualStudio/Downloads/DownloadDetails.aspx?DownloadID=33154
    Ninety-nine per cent of politicians give the rest a bad name.

  • HT2693 Where d i go if the vendor of an app has no webpage and the support link in the app store points to a nonexisting webpage?

    Where d i go if the vendor of an app has no webpage and the support link in the app store points to a nonexisting webpage?
    The app does not work and i paid 12$ for it
    How do i get either supportor my money back
    Thanks
    Juerg

    Try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via the Store > View My Account (Store > View My Apple ID on iTunes 11) menu option and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find that app and use the 'Report a Problem' link and fill in details about the problem (iTunes support should reply within, I think, about 24 hours).
    Some people have had a problem with the 'report a problem' link (it's been taking people to this site on a browser instead of showing a form in iTunes) - if it does that to you then try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page.

  • Update the web links on the Crystal Reports start page?

    Many of the web links on the Crystal Reports start page are now useless and direct to the general "Welcome to the SAP Support World!" page.
    When will / how can these be updated?

    You should be able to do searches here:
    https://www.sdn.sap.com/irj/sdn/businessobjects-articles
    https://www.sdn.sap.com/irj/sdn/businessobjects-downloads
    Ludek

Maybe you are looking for