Why every half hour or so does my iPad camera app stop working?

Every like half hour or so my iPad camera app stops working. I tap and It and a blank screen appears. If I turn my iPad off and on again it works fine.

There are any number of reasons why that might be happening. An app confict, low memory (that's not supposed to happen but ...), so it's hard to say for sure what the issue could be.
You could try closing the camera app until you need again, and see if that makes any difference. Unless you really need to get to the camera app every half hour for whatever reason, there should be no problem in quitting the app.
Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps.
Then just launch the app again when you need it.

Similar Messages

Why does the ipad 2 speaker stopped working after upgrading to ios 8

WWhy does the iPad 2 speaker stopped working after upgrading to ios 8 why plz respond

Hi A_S85,
It appears your iPhone has an issue relating to sound. The following article may help you find a solution:
If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support
Can't hear anything from the built-in speaker of your iPhone, iPad, or iPod touch? Maybe you can hear, but the sound is distorted, muffled, intermittent. Or maybe you hear static or crackling noises. If your iOS device has any of these issues, follow these steps.
Follow these steps and test the sound after each one.
Go to Settings > Sounds and drag the Ringer And Alerts slider to turn the volume up.
If you can hear sound from the speaker, then the speaker works. Continue with these steps to find the setting or switch that's affecting the sound. If you can't hear sound from the speaker, contact Apple Support.
Make sure the Ring/Silent switch is set to ring. If you can see orange, it's set to silent.
Restart your device.
Open an app that has music or sound effects. Adjust the volume with the volume buttons or the slider in Control Center.
Go to Settings > Bluetooth and turn off Bluetooth.
If there's still no sound, connect a headset. If you can hear sound through the headset, remove it and clear any dust or debris from the headset jack of your device.
If the device is in a case, make sure that the case doesn't block the speaker.
Use a brush to gently clear any debris from the speaker and Lightning connector (or 30-pin dock connector). The brush should be clean and dry and have soft bristles.
Update your device to the latest version of iOS.
If you followed these steps and still hear no sound or distorted sound, contact Apple Support.
Thank you for contributing to Apple Support Communities.
Take care,
Bobby_D

HT4101 Does the Ipad camera connection kit work with the Ipad 4 and if not is there an adapter?

Does the IPad camera connection kit work with the Ipad 4 and /or is the an adapter ?

You want the newer Lightning to USB Camera Adaptor.
http://store.apple.com/us/product/MD821ZM/A/lightning-to-usb-camera-adapter
The old Camera Connection Kit also works and I use it on my iPad 4, however, to use this your will need the Lightning to 30 pin adaptor.
http://store.apple.com/us/product/MD824ZM/A/lightning-to-30-pin-adapter-02-m

Why does my iSight camera periodically stop working, requiring PMU reset?

Just wondering why this happens?
Using a Feb 2011 Macbook Pro with OSX Lion 10.7.4
It seems that every time i use my built-in iSight camera, then the next time i go to use it, it can not be found. This requires that I reset the PMU, which is kind of annoying. Then it works for a few weeks and the cycle of iSight begins again.
Why does this happen? It seems pretty trivial to consistently recognize a camera which is wired into my computer. Is there something I could do to prevent this from happening again? I have tried turning it on and off again.
And currently, this article is linking to the reset instructions for Intel iMac instead of the Macbook Pro page...
http://support.apple.com/kb/HT2090
Thank you

dcunited001 wrote: ... Just wondering why this happens? ...
Because something is wrong.
dcunited001 wrote: ... Is there something I could do to prevent this from happening again? ...
One of the following will fix it.
(0) If you need help with the following suggestions,
      you might rather contact your local retailer or
      Apple Authorized Service Provider (AASP) for help.
      They can help you or determine whether your Mac
      needs hardware service or only a software problem.
(1) Close all open apps that use the camera and then
     try again with only one app running at a time.
     If the problem continues, delete any Log-In items and
     Dashboard Widgets that might be using your camera.
(2) Try Apple's http://support.apple.com/kb/HT2090
     Be sure to use the correct SMC/PMU reset procedure
     for your particular MBP model: model with a battery
     you should not remove on your own
     If these suggestions do not help, yours may be a
     hardware problem that will require a professional fix.
    Unless you have a current backup, make one now.
    Then use the final "Troubleshooting" suggestion:
"... contact Apple or an Apple-Authorized Service Provider for service."
(3) If you want to try one more thing on your own first,
     you can use Disk Utility to repair permissions. Then
     download and apply the latest Lion Combo Update:
      http://support.apple.com/kb/DL1524
    Repair permissions again immediately following the
    system restart that completes the Combo update.
Properly applying the Combo version of updates can sometimes correct software problems, but, if your trouble is caused by a hardware problem, there are no user serviceable parts of iSight. See your AASP for hardware problems.
dcunited001 wrote: ... article is linking to the reset instructions for Intel iMac instead of the Macbook Pro page...
The article actually has THREE links to TWO different SMU/PMU reset instructions:
• iMac G5 (iSight),
• Intel-based iMacs;
• MacBook and MacBook Pro
You should use the last one ( http://support.apple.com/kb/HT3964 ) Yes, it is the same article as for iNtel-based iMacs, but it is the correct one for you.
The important thing is to page down to the section entitled "Resetting the System Management Controller (SMC)".   Then click the reveal triangle ( ▶ ) to see and carefully follow the specific reset instructions for "Resetting the SMC on portables with a battery you should not remove on your own". This is the proper reset process for your "Feb 2011 Macbook Pro".
Message was edited by: EZ Jim
Mac OSX 10.7.4

Phone dings every half hour

Hi there
I'm wondering if anyone knows why my landline is making a little ding noise twice every half hour? It's a Wild and Wolf series 302 plug in phone. It doesn't have a separate power supply, and is plugged into an asdl filter.
It's been dinging every half hour since we first plugged it in on Saturday. Phone line normal (had engineer out on friday for separate issue).
It does it at 5 past the hour and 35 mins past the hour which is a bit strange.
Any thoughts?
Thanks in advance

A phone line has 50DC V on it provided by an Exchange Battery... When you receive an incoming call it converts to 75AC, it sends the 75AC in two short bursts repeatedly which hits a capacitor within the NTE/LJU and in the case of most modern phones, especially cordless a capacitor in them, this then trips the bell in the phone to go Ring Ring, Ring Ring, Ring Ring......
Anyway, your phone may not have a capacitor, just because it's modern doesn't mean it will. What kind of phone socket do you have? Is it a BT or Openreach branded NTE5a?
I was gonna suggest if you have a non standard LJU such as a decorative one it could be it has no capacitor and AC leakage from other circuits causes your phone to tinkle but as its every 30 mins that's unlikely?????
if the ringing was random it would make more sense, i know the Exchange does routine night testing but that's not every night and it's only done at night, never during the day and they would test the same line every 30 mins so it won't be that.......

Schedule report at every half hour interval from 5:30 AM to 5:00 PM

Hi,
We use BOXIR2 and our client has requested to schedule a RealTime Webi report at every half hour interval from 5:30 AM PST to 5:00 PM PST daily.
We tried scheduling the report but there is no option present in BO where we can select the start time or end time for a day.
Could you please let us know how we can achieve this?
Thanks,
Nikhil

Hi Ashwini,
I believe its not a good idea to set the date daily. After a lot of research on this, I found that there are 2 possible solutions for this.
1. Create 24 daily schedule for the report(s).
             i.e.
              1.     daily 8 am
              2.     daily 8:30 am
              3.     daily 9 am
              4.     u2026
              24.                daily 5 pm
2. Create a batch file that will craete a file and delete it after 10 secs. Upload that into Windows scheduler as it will run this batch file at every half hour and till 5PM only. The file created by batch file will be trigger to run report.
Does that sound good?
Thanks and Regards,
Nikhil

Radio streaming stops every half hour or so.

I stream a radio station. However it stops every half hour or so. How can I keep it going? Internet speed is down 80 and up 9 megabits.

Well, I don't know if you actually read my post, but I've already upgraded the firmware and power cycled it. Those setting are at their defaults: 100 for beacon interval, 2346 for frag thresh, and 2432 for RTS thresh. But, I did change them to the provided numbers yesterday; no change.
Let me provide some more info. I also share my wireless internet connection on my laptop and hook up my Xbox 360 to it. Also, the router is three years old. Is it normal after this time frame for it to start malfunctioning? Should we go out and get a new one? I'm talking purely by hardware lifespan right now, we don't need a new one just because it has some more bells and whistles; the one we have now has worked well up until now.
Thanks again.

Weird Sync Message Every Half Hour

About Every half hour, I get the following message or something very similar from RIM. It is filling up my Blackberry and my Outlook Inbox and is very annoying. I deleted my e-mail once and it stopped for a few hours before resuming.
I am connecting to my Outlook through the Web. My e-mail is on an exchange server.
I would love any thoughts that anyone may have. Here's the message.
The message comes from:
[email protected] or something similar. The etp# is usually changed slightly.
Here's the message...
This message is used to carry data between the BlackBerry handheld and an associated server. Please do not delete, move or respond to this message - it will be processed by the server.
BEGINETP 112
AYgCa94AAAAAIBAIMjA4Qjk3QkIgFWppbUBzdG1vdG9yc3BvcnRzLmNvbQBd4WLyUAVDTUlN
RQNAgICAgDIAADA5MDEwRjU5QStHKzEAmGpxyGHZr92CGJWLpbQFSgAZa1oD/MpIpQgJLLtK
lEG0kQ!!
ENDETP 1895240953
Solved!
Go to Solution.

9/10 times this is caused from someone installing the blackberry desktop manager program as 'BES' rather than BIS...
The email you are getting is for when a device is to be connected to the Blackberry Enterprise Server within a company.
You have either install the Desktop manager program incorrectly (highly likely so uninstall it) and also check under options > advanced options > Enterprise Activation - that you have nothing in here..
See here >>>> Network@etp messages arrive on the BlackBerry smartphone
If your issue is resolved, put a checkmark in the green box that contains the resolution.
OR
If it was just/or also really helpful - Give it a Kudos.. Go on Mate.. Help the rest of the clueless blackberry user world find their answer too..
~Gday from Down Under~

Job to execute every half hour

Hello,
I need to create a job which should execute every half hour starting from morning 6:AM to evening 4:PM every day.
How can I do this?
Thanks

Try something like this
VARIABLE jobno number;
BEGIN
DBMS_JOB.SUBMIT(:jobno,
'begin if (to_char(sysdate, 'HH24MI') between '0600' and '1600') then my_proc; end if; end;'
TRUNC(SYSDATE, 'HH')+ 1/24,
'TRUNC(SYSDATE,''MI'')+30/(24*60));
commit;
END;
Message was edited by:
Jens Petersen

How to put sync on automatic. example , every hour or every half hour.

is it possible to have sync on automatic.
so i have every (half) hour a new update?
thanks rené

Hi Rene!
Sync synchronizes the status when some changes happen. The team has been working in create a Instant Sync feature that will arrive in the next version of Firefox (Firefox 7).
What you are trying to do it's not an available feature.

Internet connection deconnects every half hour ! can i prevent that ??

It's getting me crazy. I can't find where to turn off the bloody reminder from Internet Connect that wants to deconnect me every half hour if i don't click OK.
If i download something i always get cutoff ! Help please...

Follow the instructions in this FAQ.
(15883)

Disconnection every half hour on 802.11A and G

Hello,
we installed our 14 APs "1131", WLC version is 5.2.178.0.
we are testing it at the moment, but it seems that each clients are disconnected every half-hour, on all radio slots and we have only one WLAN.
I thought it was DHCP lease issue because I configured for renewal every hour and DHCPREQUEST start at 50% of lease, but I reconfigured it for DHCP lease at one day.
Can you help me on how to debug it ?
thanks

Check the parameters for things like your authentication timeouts & key rotation times.
It might also be worthwhile to do a spectrum scan (netstumbler - www.netstumbler.com - it's free) and see if there's some external interferer.
You don't provide many details about the size, spread, number of users, etc, so answers are going to be fairly general. Post your(sanitized)config if possible.
Good Luck
Scott

Scheduling scenarios for every half hour in ODI 11g

Hi,
I am using ODI 11g.
My requirement is to execute a scenario after every half hour.
I can just see that scenarios can be scheduled on hourly basis only.
Please guide me how can i schedule scenarios on half hourly basis also.
Thanks,
Divya

Hi Divya,
Open your scheduling and go to Execution Cycle tab and Under Repetition select "Many Times", then set "Interval Between Repetitions " as 30 minutes or so.
Thanks,
Guru

Why does Apple iPad Camera Connection Kit no longer work with iOS8

Why does Apple iPad Camera Connection Kit no longer work with iOS8?

The kit is firmly inserted in thhe iPad's dock ? You could also try a reset and see if it's recognised after the iPad has restarted : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
I haven't had problems using the kit with SD cards from Canon cameras . What capacity is the card, and it's an SD or SDHC card - if it's an SDXC card that's formatted as ExFAT then it won't be recognised

Why does my Adobe Reader DC stop working when I click scroll down options?

I used to use PDF Suite 2014 Standard to view pdf files.
However, tonight a message appeared when I attempted to open files saying ..."if the document does not load then the pdf viewer may not be able to display this type of document"
I went to the website provided to download Adobe Acrobat Reader DC.
Although I was able to load pdf documents and fill in forms, the program repeatedly would crash whenever I attempted to click on scroll down options on forms.
Any help is appreciated
....and talk/write slowly for I am not super computer literate.
Regards,
Luisa

Dear Aedesh, Thank you for your assistance. I did all that you instructed below, regarding uninstalling, and using the Adobe Reader and Acrobat Cleaner Tool. I restarted my computer, then installed Adobe Acrobat Reader DC (for Windows 7, English and version: Reader DC 2015). I continue to have the problems: (1) When I attempt to use a scroll down option within a pdf form, the program stops working. (2) If I send the pdf to my iPhone, and I open the pdf, I receive the message "Please wait...if the message is not eventually replaced by the proper contents of the document, your pdf viewer may not be able to display this type of document..." However, when I send pdf's created earlier than 4-28-15, I am able to open in my iPhone.I am able to open on my laptop the pdf's created after 4-28-15, but have the scroll option issue (thank you in advance for your patience)Luisa
Luisa Montaini-Klovdahl, Ph.D.Licensed Psychologist &
Captain, US Army Reserves Medical Service Corps4153 Park Blvd
Palo Alto, CA 94306
Telephone: 650.384.6559
Facsimile: 650.384.6547 This e-mail may contain confidential patient information. If you have received this transmission in error, please delete and contact the sender.
From: aadeshs76610910 <[email protected]>
To: Luisa Montaini-Klovdahl <[email protected]>
Sent: Thursday, April 30, 2015 9:55 AM
Subject: Why does my Adobe Reader DC stop working when I click scroll down options?
Why does my Adobe Reader DC stop working when I click scroll down options?
created by aadeshs76610910 in Acrobat Reader - View the full discussionHi Luisa, Please follow the steps below :- 1) Uninstall Adobe Acrobat Reader DC. 2) Run the cleaning tool Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs3) Restart the computer.4) Install Adobe Acrobat Reader DC using this link Adobe Acrobat Reader DC Install for all versions Let me know if the issue persist. Regards,Aadesh If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7499212#7499212 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7499212#7499212 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Acrobat Reader by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Why every half hour or so does my iPad camera app stop working?

Similar Messages

Maybe you are looking for