Why HP remove support for msata drives in the ENVY 15t - q100 ?

The previous models had msata support, but the ENVY 15t - q100 (the one with no dvd drive) has the space for a msata drive, even with the screw hole but they remove the slot from the board. This is a $900 laptop, why they did that?

@Emanu526 ,
Hello and thank you for posting on the HP support forums. So that we can best support your issue please post back with the full model and product number.
HP Notebook PCs - How Do I Find My Model Number or Product Number?
As well please check out the following link before posting back.
Advice for asking the "Very Best Question"
As for changes in BIOS or configuration I am unable to comment on that. Each model is created based on a constantly changing market requirement and the engineers and design people would be the only ones that can answer that question.
Thank you again for posting and have a great day.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP

Similar Messages

Boot from mSATA drive on HP ENVY 15t-j100

I purchased an HP ENVY 15t-j100 with a 1TB drive and 16GB RAM. There is an avaialble mSATA slot in the user area so I purchased a CRUCIAL 240Gb mSATA drive with the intention of installing the WIN 8.1 OS and my programs on the solid state drive and use the slor (5400) hard drive for data.
I used the Recovery drive I created to get the OS on the mSATA - no problem.
It even boots up - but when I install the hard direve the system tries to boot from the spining drive - the BIOS shows that the Hard dirve is "in" Port 0 and the mSATA is Port 1 and there does not seem to be any what to change this so, after all the work and research it dies not seem like I can utilize the mSATA slot on this notebook.
Any ideas would be greatly apprecaited.

HLubert wrote:
I purchased an HP ENVY 15t-j100 with a 1TB drive and 16GB RAM. There is an avaialble mSATA slot in the user area so I purchased a CRUCIAL 240Gb mSATA drive with the intention of installing the WIN 8.1 OS and my programs on the solid state drive and use the slor (5400) hard drive for data.
I used the Recovery drive I created to get the OS on the mSATA - no problem.
It even boots up - but when I install the hard direve the system tries to boot from the spining drive - the BIOS shows that the Hard dirve is "in" Port 0 and the mSATA is Port 1 and there does not seem to be any what to change this so, after all the work and research it dies not seem like I can utilize the mSATA slot on this notebook.
Any ideas would be greatly apprecaited.
I have solved it by installing a third party bootloader on the main hard drive. The hard drive must be connected via USB to a computer (even the same laptop with the mSATA in as I did). I have used Bootice to install a bootloader called Plop .
http://www.pendriveapps.com/bootice-partition-flash-drive-edit-boot-sector/
Then put the hard drive back in and set the mSATA in Plop as the boot drive. Here is some info:
http://www.plop.at/en/bootmanager/thebootmanager.html#b4
I couldn't make it work but then I went to "Profiles" - "Linked partitions", picked the right partition, confirmed it and it worked. However, I don't have the laptop anymore and can't say exactly what to do.
Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
Testing - HP 15-p000
HP Touchpad provided by HP
Currently on Debian Wheeze
*Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

Did Apple remove support for DNG files generated out of Capture One?

I use Capture One to convert my Leica Dlux-4 RAW files into DNG format and then use Aperture2.1.4 as my photo processing tool.
After I ran the latest OS update - Aperture gives a "Unsupported file format" message for all the DNG files.
Is it possible that Apple removes support for photo formats in the OS updates?
Anyone encountered the same issue and found a solution?
Thx

Go in the adjustment tab, and the first thing you'll see under the histogram is "Raw fine tuning". By default, "2.0" is selected. When importing DNG, you can switch it to "2.0 DNG" this is used to read DNGs from cameras Aperture doesn't support.
Maybe the update made it go back to its default "2.0" while before you where on "2.0 DNG". If I'm right, setting it to "2.0 DNG" will fix the problem.
P.S. sorry if I said "raw precision" instead of "Raw fine tuning" in the first place. My Aperture is in French and the name in French is "Réglage de précision raw" and I did a bad translation.
Message was edited by: Manusnake

How is ENET-232/4 Supported Now that NI-Serial 14.0 has Removed Support for ENET?

Dear smarter people than me, I have been pulling my hair out trying to get my brand new ENET-232/4 units running under the lastest and greatest LabVIEW envirenment (2014).
After finding that none of the instruction matched what I was seeing in MAX etc, I discovered the following line in the NI-Serial 14.0 driver release notes;
Release Notes
Removed ENET support
NI-Serial 14.0 removes support for all NI Serial ENET Interfaces (ENET-232/2, ENET-232/4, ENET-485/2, and ENET-485/4).
So my question is if NI-Serial no longer supports or configures the ENET-232/4, then what does? At the moment I just have 5 rather exspensive boxes sitting on the shelf unable to be configured.
Smart brains please help
Dave

Hi Dave,
As per the NI-Serial 14.0 Readme, as you have already discovered, support for all NI Serial ENET devices has been removed. This is a result of the NI Serial ENET devices being discontinued. As mentioned by Michel_Gauvin, the NI Serial ENET devices can be used without the presence of the NI-Serial driver on the system. Instructions for using NI Serial ENET devices via the NI-VISA driver can be found in this KnowledgeBase. As a note, the ENET device will still need to be configured on a system that has NI-Serial with ENET support. My recommendation would be to stick with NI-Serial 4.1 for ease of use and configuration if you plan on continuing to use the ENET devices.
Michel,
Changes to your LabVIEW code could be required when moving to a 64-bit Windows operating system. One change that may be required is the "VISA resource name" input because MAX will not discover/show the NI Serial ENET device on the 64-bit OS, so if an alias was being used during development it would not be recognized when moved over.
Best,
Jake B.

[svn:fx-trunk] 10963: Integrating latest FXGUtils that removes support for format to reflect FXG 2.0 final specification, as well as corrected bounds calculations, including corrections for stroke width.

Revision: 10963
Author:   [email protected]
Date:     2009-10-09 16:19:35 -0700 (Fri, 09 Oct 2009)
Log Message:
Integrating latest FXGUtils that removes support for related test as that has been removed from FXG 2.0. The updated bounds calculations mean that bitmap compares for stroke related tests will need to be updated.
Doc notes: None
Bugs: N/A
Reviewer: Min
Tests run: Checkintests, mustella spark/core/fxg (bounds change tests were excluded)
Is noteworthy for integration: Yes, this includes corrections to bounds calculations and thus changes rendering.
Modified Paths:
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/fxg/FXGCompiler.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/fxg/FlexFXG2SWFTranscoder.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/lang/StandardDefs.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/fxg/FXGConstants.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/fxg/FXGException_en.properties
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/fxg/swf/FXG2SWFTranscoder.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/AbstractFXGNode.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/AbstractShapeNode.jav a
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/CDATANode.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/EllipseNode.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/GraphicContentNode.ja va
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/GraphicContext.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/GraphicNode.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/LineNode.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/MaskableNode.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/PathNode.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/RectNode.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/RichTextNode.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/TextGraphicNode.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/TextNode.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/fills/BitmapFillNode. java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/richtext/AbstractRich BlockTextNode.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/richtext/AbstractRich ParagraphNode.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/richtext/AbstractRich TextLeafNode.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/richtext/AbstractRich TextNode.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/richtext/DivNode.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/richtext/LinkNode.jav a
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/richtext/ParagraphNod e.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/richtext/TCYNode.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/strokes/AbstractStrok eNode.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/text/AbstractTextNode .java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/types/FillMode.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/sax/FXG_v2_0_Handler.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/swf/ImageHelper.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/swf/ShapeHelper.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/swf/TypeHelper.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/types/FXGMatrix.java
Added Paths:
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/richtext/TextHelper.j ava
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/richtext/TextLayoutFo rmatNode.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/richtext/TextProperty Node.java
Removed Paths:
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/richtext/FormatNode.j ava
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/richtext/LinkActiveFo rmatNode.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/richtext/LinkHoverFor matNode.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/richtext/LinkNormalFo rmatNode.java

Support for Conexant chipsets and the HSF driver

Is it possible to add in kernel's PKGBUILD patch http://www.linuxant.com/alsa-driver/als … 19-3.patch for improving support for Conexant chipsets and the HSF driver?

You better file a bug report for it: http://bugs.archlinux.org/
Last edited by Nepherte (2009-04-24 10:06:17)

When i try to open photoshop this shows up Please uninstall and reinstall the product. If this problem still occurs, please contact Adobe technical support for help, and mention the error code shown at the bottom of this screen. Error: 16

i had to take my photoshop file into a hardrive because my dad was going to give me a new Mac and when things didn't work out and went back to my old one i use the time capsule thing to save everything before but didn't give me photoshop so i physically moved the file and tried to open it but then this error shows up
Please uninstall and reinstall the product.
If this problem still occurs, please contact Adobe technical support for help, and mention the error code shown at the bottom of this screen.
Error: 16
and when i click the uninstall app on the file it tells me this
The alias “Uninstall Adobe Photoshop CS6 2” can’t be opened because the original item can’t be found
and when i click fix alias i click on photoshop and the app just turns into photoshop and i just run in circles
please help thank you

Run the cleaner tool and reinstall.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Download CS6 products
Mylenium

Is it possible to use an mSata drive as the primary drive?

Greeting everyone,
I recently bought an HP ENVY Phoenix 810 whiich comes with the MS-7826 (Kaili) motherboard which has an mSata slot with a 16gb msata ssd in it, but it's only being used as a cache. So my question is, is it possible to use the mSata drive as as the main bootable drive along with 3 other hard drives? I'm planning to install a 256 msata ssd along with 3 4tb hd, but want to use the msata as the main one. Is it possible, if so how?
I've come across a few forums where they were having problems with the same thing where they were able to use it as the main drive but as soon as they installed the original bootable drive they system will not boot since the drive didn't have an operating system installed in it and it wont boot from the mSata even though the os was installed onto the mSata. Any ideas?
Thanks in advance.

JCCR510, welcome to the forum.
The mSATA drive in the computer can only be used as cache and not as a boot drive. This is the way that HP has it setup.
You certainly can buy a SATA SSD and install it. As you can see in my signature below, I have Samsung EVO 840 SSD in my 810-135qe. It works great.
Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Will there be support for Adobe Ideas with the Adobe Ink and Slide?

Will there be support for Adobe Ideas with the Adobe Ink and Slide?

We're working on an update to Ideas to add support for Ink & Slide. Stay tuned for further information as to timing.
Kim
Adobe Ideas Team

[svn:fx-trunk] 5873: Adding support for [Alternative] metadata to the asdoc tool.

Revision: 5873
Author: [email protected]
Date: 2009-04-02 09:46:24 -0700 (Thu, 02 Apr 2009)
Log Message:
Adding support for [Alternative] metadata to the asdoc tool.
QE Notes: None.
Doc Notes: None.
Reviewed by: Paul
tests: checkintests, asdoc
Modified Paths:
flex/sdk/trunk/modules/asc/src/java/macromedia/asc/parser/MetaDataEvaluator.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/ClassTable.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/TopLevelClassesGenerator.ja va
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/TopLevelGenerator.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/lang/StandardDefs.java

HT5622 Why do i asked for payment verification if the application i was about to download is FREE?? This happens after i change/reset my password.

Why do i asked for payment verification if the application i was about to download is FREE?? This happens after i change/reset my password.

Ive tried to complete the payment verification form but was declined due to my card has insufficient fund. But take note the app i was downloading is Free. Why am i charging for a Free app? Is this some kind of a bug or something? Need some help.

Why no SyncML-support for Harmattan??

I've used SyncML on my N95 with memotoo.com for years. Worked very well. I took it for granted that SyncML would be supported on the N9. But alas, it isn't. I find that really incomprehensible. Worse yet, CalDAV syncing with memotoo doesn't work - I don't know who's to blame for this, but on the desktop it works flawelessly so I do have a suspicion. Even worse: there is no way to sync contacts using CardDAV.
MeeGo (the true MeeGo) has SyncML-support out-of-the-box. And the N9/N950 does have SyncML-support for bluetooth.
Yes, contacts syncing is supported for Ovi. And Google. And Facebook. But I do NOT want to use those services, because of grave privacy risks and because they use yet again some proprietary protocols.
I wonder, what where they thinking at Nokia for NOT supporting some well-known open standards??
(While I'm ranting: why is there ^%@$ Facebook and GTalk-support over XMPP, but no self-defined XMPP account?? Yes, you can add such accounts from the terminal, using mc-tool, but really that's just a kick in the teeth. And where's UPnP/DLNA-support?)

Hey Guys, Did you figure out any way to do PIM sync via SyncML on N9?
I am struggling to get things moving as I come from N8.
N9 just doesnt have any way to sync calendar, tasks with Ovi. Same with Notes.
Best Regards,
Suyog

Why is Verizon support for Backup Assistant so limited?

Folks, I have wasted a whole day looking for a solution to this problem. Perhaps this posting will save someone from wasting their time.
After over an hour on the phone with two customer support people and a wasted hour at the local Verizon corporate store, and endless hours searching for an answer online, I am at a dead end. There are hundreds of reports in these forums about problems with Backup Assistant (BA). There are instructions on the Verizon website that indicate BA will work if you follow the steps. It just ain't so. Seems to me all Verizon cares about is selling the latest and greatest smart phones.
Here's the story. Backup Assistant was working on an LG VX6100. It is a tedious program, but at least contacts could be backed up when it worked.
Today I transferred the 6100 to a new number for a family member, and activated an LG VX8300 for myself. The first phone customer support person directed me through the same steps numerous times and just couldn't believe that the menu options they spoke of were NOT on the phone. I was finally turned over to a second customer support person who directed me through exactly the same futile steps. I read them the same error message over and over again. It was: "Unable to retrieve catalog. Please try again later (3332)." Then I was directed to go to a Verizon store in town for help. Another useless venture. I brought along the following instructions which I found in one of the forums here:
https://community.verizonwireless.com/message/826595#826595
Correct Answer Re: VX8300 "No Application" Message, also an Error (3332)
SuzyQ CommunityLeader
SuzyQ Feb 29, 2012 8:42 AM (in response to Grove)
This response several months ago from MikeS_VZW - there IS a fix but as rep may have to look to find it -
We hear your! I have posted several things about not being able to access the Get It Now catalog on some older devices. Before, there was no way to get your access back to the catalog. You had to upgrade to a new device if you did not access the catalog between September and March 25, 2011. There has been a lot of feedback about not being able to access the catalog, so we made it possible to get it back.
Here's what you need to do to get your Get It Now access back on your older phone:
1) Ensure you are able to access other data on your phone (go to settings & tools> My Verizon or My Account) this does not charge megabytes, but does connect to data. This will ensure other data is working.
2) Make sure you don't have blocks on your line that is preventing you from accessing the Get It Now catalog (app blocks, etc.)
3) Take it into any Verizon Wireless corporate store (authorized dealers/premium retailers will probably not have this ability).
4) Explain your issue to them. If you are getting error 3332 when you bring up Get It Now, let them know.
5) A representative will plug your phone into a computer and flash the certificate/update onto your phone (we have articles in our information database to walk them through that if it's their first time.
6) Enjoy having access to your Get It Now catalog again!
This is new information. Before, the only option was to get a different phone. I know this sounds cheezy, but we do hear you. Lots of feedback came about due to this change, and although we tried to be proactive as possible to alert the affected users, there were some that fell through the cracks. Feel free to PM me or call customer service at 800-922-0204 for further information about this.
Good luck! And note it specifies CORPORATE STORE - that may be why you weren't getting anywhere before. Use the Store Locator (top right of your screen) to make sure you are dealing with a corporate rather than "authorized reseller".
The store clerk read it. After dinking around with the phone for 15 minutes he said he thought a software update for the LG VX8300 might help. He took it in the secret back room, and came out a few minutes later and said that they didn't have the latest version because the IT people hadn't made it available to them and probably wouldn't because the phone was an older phone. Apparently anything older than 4 years is ancient in Verizon's eyes. He suggested I might be able to get it directly from LG. He also said I could bring in the VX6100 and maybe they could transfer the contacts directly from it to the VX8300 if they could find a cable. However, that still leaves me with no Backup Assistant. That was that.
LG does indeed have updates available online, but it requires a special LG USB cable which I do not have. For instructions visit
http://www.howardforums.com/showthread.php/985182-Tutorial-VX8300-How-to-upgrade-downgrade-your-firmware-W-Pics
http://www.lg.com/us/support-mobile/lg-VX8300
Ideas, anyone?
This whole ordeal does not make me want to commit to a 2-year contract that comes along with new equipment.

I noticed that you posted this a couple of months ago... I just activated an old VX8300 as well and am having the same error messages. Did you have any luck getting it figured out?
I agree with you as well. I am getting married in June and do not want to upgrade to any kind of data plan for 2 years and after we get married we're switching to Sprint, not this Verizon garbage with the worst customer service that only cares about screwing people over in this terrible economy. (Sorry, enough ranting from me, just curious if you ever got it fixed? Thanks!)

Why no firewire support for new iPods?

If firewire is so much better and faster why did the geniuses at Apple decide to discontinue support for it? It took me over 30 minutes to upload music & videos to my new iPod w/ USB, which would have taken 5-10 minutes with Firewire. I don't get it!

They did it because they obviously didn't see the need for it.
Either you have a usb 1.1 port, or have about 500mb of music. The speeds aren't that different between USB2.0 and FW. In fact, i think USB is faster. Stop complaining here, this is only a user-user support forum.

Why no RAW support for the Fuji FinePix HS10?

This camera is well over a year old. Why is there no support for the RAW file?

It is definitely not only Fuji. I used a Panasonic Lumix FX-150 before that has been supported by Adobe Camera Raw for quite some time now. I replaced that camera by a Lumix LX5, but I see that the FX-150 is still not supported by Apple Camera Raw and probably never will.
If you want wide range RAW support, use Lightroom. (Not to say that Aperture doesn't have its strengths, e.g. support for geocoding.)

Why HP remove support for msata drives in the ENVY 15t - q100 ?

Similar Messages

Maybe you are looking for