Why I am not able to login by ISQL*PLUS?

Hello any one can help me?
I installed RHEL.4 with my pentium 3 machine with 512mb of RAM. I installed with 4 partition /,/boot, /oracle and swap partition.Linux is running pretty fine. i installed Oracle 9i release 2 successfully without any error except agent get fail. Now i skiped the DBCA database creation and created manually using OMF.Now I am not able to connect my database by using ISQL*PLUS. can i get help? as well as how to login in iSQL*PLUS as sysdba? should i configure apache induvidually if yes how to do that?

Make sure your Apache http server is up and running, this is the entry point to your isqlplus in 9iR2
apachectl start
Once started, get access to the regular url to your apache home page:
http://hostname:ApachePort/isqlplus
investigate which one is the port used by your http server, Oracle by default sets it to 7777. This can be found at the httpd.conf configuration file.
On the other hand, in order for you to access as isqlplusdba, this should be enabled at the isqlplus.conf file found at the $ORACLE_HOME/sqlplus/conf directory, you will find both, sqlplus and isqlplus locations declared on the same file, the second one is commented. It is configured so you provide a password by means of the regular apache authentication mechanism, it's up to you if you wan to use it or just rely on the sysdba password to gain access to your database.
~ Madrid.

Similar Messages

Not able to login through isql*plus ?

Hi
I am using 10gR1 on Aix machine. I have successfully started isqlplus at server. I am getting the login page at the web browser. How ever when I try to login I get the following error.
SP2-00908:- iSQL*Plus may have been restarted without being properly shut down
Contents of my listener file are as follows:-
Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /oracle/app/product/10.1.0)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = node2)(PORT = 1521))
Tnsnames.ora
HYPAAS =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = node2)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = hypaas)
WISTG =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.201.51.141)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = wistg.kaka.com)
HYPTEST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = node2)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = HYPTEST)
PORTALDB =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.200.49.136)(PORT = 1521))
(CONNECT_DATA =
(SID = myspace)
TED_MIGRATION =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.200.49.14)(PORT = 1521))
(CONNECT_DATA =
(SID = testdb)
SQL_PDEV_PROD =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.200.49.28)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = RECT)
FDMDEV =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = node2)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = fdmdev)
HYPERION =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = node2)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = hyperion)
WISTGDEV =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = node2)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = wistgdev)
)

Try this, as for Metalink Doc ID: 289815.1
1. Stop isqlplus
2. Set the uname variable as follows from command line.
$ uname=`uname -s`; export uname.
(Note that you use a backward quote which may be located left of the number 1, depending upon your keyboard).
3. Start isqlplus and test.

User not able to login to Discoverer Plus 10g with Java 1.8 and Java1.6

Hi,
The user is using Windows machine and trying to login to Discoverer Plus 10g. He recently upgraded to Java 1.8 and was not able to login.
We informed the user that Discoverer 10g is not compatible with java version above 1.6. The user removed the java 1.8 and installed 1.6 again.
Still he is facing issue.
The error he gets is:
Unable to connect to the Discoverer Server: null
Please contact your Oracle Application Server administrator
Please suggest.
1. Is there also a way to make it work with java 1,8 version as the user need to use it for the Oracle HRMS.?
Thanks
Chhavi

Hi,
The user is using Windows machine and trying to login to Discoverer Plus 10g. He recently upgraded to Java 1.8 and was not able to login.
We informed the user that Discoverer 10g is not compatible with java version above 1.6. The user removed the java 1.8 and installed 1.6 again.
Still he is facing issue.
The error he gets is:
Unable to connect to the Discoverer Server: null
Please contact your Oracle Application Server administrator
Please suggest.
1. Is there also a way to make it work with java 1,8 version as the user need to use it for the Oracle HRMS.?
Thanks
Chhavi

Not able to login from microsoft account's generat...

I had created a skype id using my hotmail account. The skype name automatically generated as live:***
I am able to login to skype on any device when I signin using Microsoft account and enter details of my hotmail account.
Problem: Why am I not able to login using the automatically generated skype name (live:***), on any device or browser. Whenever I try logging in using this skype name I get an error that please check your skype name and enter password and login again.
Please help!

Hi,
I presume you have implemented the solution provided in the KBA 1204539
Two things you might try:
- Use the IP address as CMS name. If that works, then you have a problem with your resolution. You need to check your client DNS settings and suffix.
- Make sure that there is communication between CMS server and client. If you use requestport parameter, you need to verify with your network admin that the range indicated is opened between server and client.
- Use the requestport parameter for Input FRS as well
You can check more details in the section "Working with Firewalls" (page 450) http://help.sap.com/businessobject/product_guides/boexir31SP3/en/xi31_sp3_bip_admin_en.pdf
I presume that your LiveOffice is working because you are connecting to QaaWs and your connection to the Web Application server is fine. The problem are the other ports.
Regards,
Julian

Existing users not able to login to Application

Hi all,
For satisfying one of the security requirement. We secured Entity dimension and created new member access profile and new team.
For the new user and we (Admin team) has assigned this newly created team.
Now only we (Admin team) and new user is able to access the system.
Inorder for all other users to access the Application. Do we need to assign newly created team to all of them? is there any way to do it?
Regards
Abhishek

Hi ABHISHEK BANSHIWALA,
Since you have checked Entity dimension has secured now and created new Member access profile for new users.
But for existing users who are using existing Member Access profiles which does not have Entity dimension defined this is the reason why they are not able to login to BPC Application.
Please edit all the Member Access profiles and establish a reference to the ENTITY dimension for [ALL]
Regards,
Rajesh Muppala.

Not able to login to BIP using OBIEE Admin credentials

hi,
I am not able to login into BI Publisher(http://<Server name>:7001/xmlpserver/) with my OBIEE Admin credentails. It throws an error "Unauthorized Access: please contact the administrator".
I have checked in console that this Admin User has been assigned to Administrators and BIAdministrators group.
Also I have a BISystemUser which is assigned to Administrators group.
Don't know why it is not working as similar User and group setting onto a different server works.
Regards,
Bhavik

Any suggestions would be helpful.

After upgraded 9.2 DB, all users are not able to login (Except Guest).

After completed the DB upgrade from 8.1.7.4 to 9.2.0, all users are not able to login the oraclemypage.home. This is except the Guest account.For example, I use the sysadmin account to login the oraclemypage.home. It shows "Your login is invalid. Please login again."
Moreover, I do the following query.
SQL> select fnd_web_sec.validate_login('SYSADMIN','SYSADMIN') from
dual;
FND_WEB_SEC.VALIDATE_LOGIN('SYSADMIN','SYSADMIN')
N
If I guery the Guest account, the result is "Y".
Also, all users can access via dev60cgi/f60cgi to open E-business 11.5.7 application. Are there any missing script / process I need to do?
Thanks,
Matthew

Hi Arun,
What message u get on the apache logs / jserv logs when u get the error ?
Since the log cumulate a giga byte, I clean up the log and test again. It seems no error message.Whats your platform?
HP-UX 11.11To which version (5 digit) u upgraded DB ?
Oracle9i Enterprise Edition Release 9.2.0.6.0 - 64bit Production
I found a note 225074.1 that talks of a similar issue where users are ablt to login to forms but not php. this is for AIX. review the note.
I had checked this previously. Part of this document already tried which suggested by Oracle Support.what is the end_date for all of these users in fnd_user table ? if all users for some reason is end_dated , then fnd_web_sec will show 'N"
All users are normal. For those I tested without end_dated, I can access via f60cgi too.whats the session_cookie_domain set to in icx_parameters table? Set to NULL and try bouncing apache once.
This set to ".mycompany.com". You mean that I set the session_cookie_domain to NULL and restart Apache, right? Why I need to set it NULL?

AD integration - not able to login

I have configured Active Directory in my weblogic server. I am able to get the user-list in console/Security Realms >myrealm >Users and Groups.
But i am not able to login using that user id and password (From my active directory) to webcenter spaces and content server.
The error while login we get is - Invalid Credentials
Please try entering your user name and password again.
Please Help.
Thanks in advance

Hi
Is your JPS provider showing status as GOOD ? On UCM 11g the credential will be mapped to UCM through the JPS provider by default . It could be that the JPS provider is down which is why you are not able to do the login .
If JPS provider is showing status as GOOD and still showing the problem then check on the following points to see if any of them has been missed :
•     Once any errors are corrected, go back into the myrealm security realm again, and edit both your ActiveDirectory and DefaultAuthenticator providers to change their Control Flag to SUFFICIENT.
•     Reorder the providers so that ActiveDirectory is the first in the list.
•     Restart the WLS admin server and any managed servers one more time. You should now be able to log in to UCM/URM using an Active Directory username and password.
Thanks
Srinath

Not able to login to esb (soa suite 101034)

Hiii
I have soa suite 10134 MLR#7 is installed and using SOA Suite regularly.
Suddenly today I'm not able to login to ESB Console. The other consoles bpel, em and ruleauthor are working normal.
In the logs, I got
java.lang.Exception: Failed to create "ejb/collaxa/system/DeliveryBean" bean; exception reported is: "java.lang.ClassCastException: __Proxy
2046
at __Proxy2046.create(Unknown Source)
at com.oracle.bpel.client.util.BeanRegistry.lookupDeliveryBean(BeanRegistry.java:284)
at com.oracle.bpel.client.delivery.DeliveryService.getDeliveryBean(DeliveryService.java:299)
at com.oracle.bpel.client.delivery.DeliveryService.request(DeliveryService.java:85)
at com.oracle.bpel.client.delivery.DeliveryService.request(DeliveryService.java:55)
at org.quartz.core.JobRunShell.run(JobRunShell.java:191)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:516)
Any idea why that is happening !!!
Edited by: user10545773 on Jul 9, 2009 10:47 PM
Edited by: user10545773 on Jul 10, 2009 7:55 AM

Hi
JDeveloper Extensions (SOA or BPM) do NOT have any relationship to where the JDeveloper is installed (like which middleware home). As mentioned, its better to install JDeveloper in its own home.
NOW, coming to getting the extensions for BPM or SOA, sometimes the Oracle Site may be down and hence online update may not work. Please see this below post, specially the 2 links I pasted there. I verified, they have downloadables for 11.6 version also. Just download them and apply the extensions manually.
Re: Unable to connect to Update Center
Thanks
Ravi Jegga

Why am i not able to install creative cloud?

Why am i not able to install creative cloud? i paid for the package, downloaded the installer now its been trying to connect to the server since a day..

You can check these :
Creative Cloud Connection Update
Sign in, activation, or connection errors | CS5.5 and later
CreativeCloud Manager can't connect to Internet
Regards
Rajshree

Not able to login after configuring SSH.Please reply

i have configured AAA on Cisco aeronet 1400 series wireless bridge (AIR-BR1410A-A-K9).After configuring i am not able to login to the device via telnet and via putty.Soon after enabling SSH i am not able to login even through SSH.The below are the commands i have configured on the device.I used to configure the same commands on my Cisco Switches also.
Layer -2
ip domain-name NETS
crypto key generate rsa general-keys modulus 1024
ip ssh version 2
aaa new-model
aaa authentication login Login-LAN group tacacs+ line
aaa authentication enable default group tacacs+ enable
aaa accounting exec EXEC-LAN-L2 start-stop group tacacs+
aaa accounting commands 1 Level-1-LAN-L2 start-stop group tacacs+
aaa accounting commands 15 Level-15-LAN-L2 start-stop group tacacs+
tacacs-server host 10.254.0.140 key !n01#zh3r3@|2
line vty 0 4
accounting commands 1 Level-1-LAN-L2
accounting commands 15 Level-15-LAN-L2
accounting exec EXEC-LAN-L2
login authentication Login-LAN
transport input ssh

Hi,
Check out the connectivity between cisco aeronet and TACAS server and what is the failed logs says in tacas server.
If possible try to change the configuration to aaa authentication login Login-LAN(default) group tacacs+ line and then try what exactly happens.
Hope that helps
Regards
Ganesh.H

Not able to login PIA - An error has occurred. You may attempt to sign in again. If your attempt fails, please contact your System Administrator

One of the user is getting the below error when the person is trying to login ELM system. what could be issue for the specific user and how do we resolve this issue?
"Not able to login PIA - An error has occurred. You may attempt to sign in again. If your attempt fails, please contact your System Administrator"

Its works for other users, its only happened for one specific user only? I didn't check the APPSRV.LOG file? what needs to be checked in APPSRV.LOG, I can ask my infra team to check, because I don't have app server access to check log file.

Why spotlight is not able to perform searches on iCal events older than 365 days?

why spotlight is not able to perform searches on iCal events older than 365 days? I really do not understand why if iCal can sync all events, even the very old, the spotlight will not be able to search on events older than 365 days; why? is absurd; let's say I want to search for a person contained in an old appointment: iCal in your Mac with a few key words, I find it right away, but this important feature on the iPhone is locked; we have in our pockets phones are very sophisticated, but it does not manage to make things really trivial.

Submit your feedback directly to Apple using the appropriate link on the Feedback page:
http://www.apple.com/feedback

Certain songs wont transfer from Itunes to Iphone, telling me to authorize computer and when I do so, it's telling me that computer is already authorized. So why am I not able to tranfer certain songs from itunes to my iphone?

Certain songs wont transfer from my itunes to my iphone, it's telling me that the computer is not authorized but once I go up to Store and authorize computer and enter in my info, it tells me that the computer is already authorized. So why am I not able to transfer certain songs from my itunes to my iphone?

Hello Jfalconi19,
Thank you for providing the details of the issue you are experiencing with transferring the apps purchased from the iTunes Store. I recommend following the steps in this article:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/ts1389
Thank you for using Apple Support Communities.
Best,
Sheila M.

Please , help me for apple id....... i made new id but there is a credite card option and that's why i am not able to download any free application for iphone,.....so,.....what i do about this problem..???

please , help me for apple id....... i made new id but there is a credite card option and that's why i am not able to download any free application for iphone,.....so,.....what i do about this problem..???

You can create an Apple ID without a credit card by following this guide exactly: http://support.apple.com/kb/ht2534. Note that you have to start by downloading a free app, then create the ID.

Why I am not able to login by ISQL*PLUS?

Similar Messages

Maybe you are looking for