Why is my nano 7th generation only holds 600 songs

My new ipodnano 7th generation is almost full and has only 600 songs in itunes.Why?

Right click on one of the songs in iTunes, go to Get Info, and tell us what format the song is in and what size (in MB) it is.

Similar Messages

IPod Nano (7th Generation) skipping throughout current song

So my iPod Nano (7th Generation) is skipping during just about every song that I play. The current song that I will be listening to will remain playing, but it will constantly skip throughout that same song (may sound weird... I know) unless I change to the next song or restart that current song over again. It could be a defect but I'm not 100% positive what it is. Someobdy please help me!!! Thanks

Looks like I might have fixed it. I reset to the factory default and then made the iPod do a re-start before I re-synced my songs. So far so good.

My I-Pod Nano (1G) will only hold 68 songs.

I purchased an i-Pod Nano yesterday. I have loaded the software and verified that all the software is up to date. When I plug in the i-Pod to transfer songs from the i-Tunes library, it tells me that I have already used 633 KB of software but my i-Pod is EMPTY. I have tried resetting the i-Pod numerous times. Please HELP -- I'm not sure what to try next except returning the i-Pod.

Try restoring your iPod, this will erase the hard drive, reload the software and put it back to default settings: Restoring iPod to Factory Settings

My Windows 8.1 computer doesn't recognize my iPod nano 7th generation. Why?

My Windows 8.1 computer doesn't recognize my iPod nano 7th generation. Why?
When I connect my iPod to my computer, nothing happens. I've read the tips in the section "support" and I noticed that maybe Windows 8 is not one of the operating systems that are compatible with an iPod nano 7th generation. If I'm right, what can I do if my only device is a Windows 8?

Hi, Grafiti.
Thank you for the question. Below, I have attached a couple troubleshooting articles that will help resolve the device not being recognized by iTunes.
iPod not recognized in 'My Computer' and in iTunes for Windows
http://support.apple.com/kb/ts1369
If the issue still persists after processing these steps, see the section in the article below labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8.
Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Jason H.

How do I get the ipod nano 7th generation to only show the album artwork? the volume control, info bar and album artwork shows whenever a song is playing.

How do I get the ipod nano 7th generation to only show the album artwork? the volume control, info bar and album artwork shows whenever a song is playing.

Hi TheGuru146,
It sounds like the iPod isn't restoring correctly. Try putting the it into Disk Mode manually and then restoring the iPod again as described in the article linked below.
Putting iPod into Disk Mode
http://support.apple.com/kb/ht1363
iPod nano (7th generation)
Before placing the iPod into Disk Mode, verify that it has a charge.
Reset the device by pressing the Sleep and Home buttons simultaneously until the display shows the Apple logo. This should take about eight seconds.
When the Apple logo appears, press and hold the Volume Down and Volume Up buttons simultaneously until the device enters Disk Mode.
-Jason

My ipod nano 7th generation will not hold a charge

i plug in my ipod to the computer. it syncs just fine and looks like it is charging. However, as soon as i unplug it it dies. it seems to not be able to hold a charge.

Hi raf996,
If you are having power related issues with your iPod nano 7th Gen, you may find the troubleshooting steps outlined in the following article helpful, including service if necessary:
iPod nano (7th generation): Hardware troubleshooting
http://support.apple.com/kb/TS4433
Regards,
- Brenden

Why won't my BRAND NEW iPod Nano 7th Generation recognize headphones?

My BRAND NEW iPod Nano 7th Generation (purchased from and Apple Store less than a week ago) will not recognize any headphones. Consequently, I can hear NO sounds. It worked just fine right after I set it up. I turned it off, disconnected headphones that came with the Nano. Several hours later I turned it on again, plugged in the headphones, and then I could hear NOTHING. When I tried the radio, I got the message there was no signal because it said the headphones were not plugged in, which they were. I have tried two other sets of headphones. None work, but they all work in another iPod, so I know it is not the headphones. I restored the software and started over, but this didn't help either. I have pushed the headphone jack in as far as possible. This is very frustating because this Nano was a birthday gift for my husband. I will be grateful for any help. Thanks a lot.

Thanks SO much for the GREAT advice! I did just what you said, and I am back in business. The sound is fine, and the radio works. I cleaned out the jack with a tooth pick, blew some air in, and pushed the jack in a bit harder.I guess I was too tentative about pushing the jack all the way in. You were right that it is a tight fit. Thanks again, deggie. My husband thanks you also! His birthday gift now works! Yay!

IPod nano 7th generation battery in sate of deep discharge?

Hi all,
I have not used my iPod nano 7th generation for several weeks, and now have only a black screen, despite attempting to charge it several times. I read where this is considered a deep discharge. Is there a way to recharge the nano myself? Thanks

Hi,
Press and hold home and on/off button until the apple logo appears. Then you can charge your ipod. After fully charging it off it and on it again.

Ipod Nano 7th Gen only charges when connected

So my friend had her Ipod Nano 7th generation laying around. She bought it from someone else. They both could not figure out how to use it so they kept selling it off cheap. I ended up getting it for a good price only to come home, plug it into my computer, and all it does is charge it. My computer doesn't even recognize a device is plugged into it. I've downloaded, reinstalled, and made sure Itunes was updated but that's not the problem. The computer alone doesn't even seem to know its there.
The last time I had an ipod like this, I remember just having to right click on it in my devices and then go to Itunes and it was there. But with it being connected to my computer right now, full battery... It is like its invisible.
What I have all tried is below
Making sure Itunes is updated
Restarted Computer
Connected and reconnected Ipod Nano
Held Center Button and Power button to reset it
Did the same thing to try and put it into disk mode
Reconnected the ipod to every possible USB port on my computer (3 different spots)
I feel like there was something missing when she dropped this off. When she delivered it, it came with the sync/charge cable, the ipod, and the arm band. Please help.

I believe you may have discovered why multiple people "kept selling it off cheap".
Unfortunately, it seems like the "good price" you got it for was a bit too high... Drop it in the recycle bin at your local electronics store the next time you're there.

How do I shuffle a playlist during a workout on an ipod nano 7th generation?

How do I shuffle a playlist during a workout on an ipod nano 7th generation? The only shuffle option I see is for all songs, not a specific playlist. I know that I can begin a workout using the now playing option. This will allow me to shuffle a playlist in the begining of my workout, but if I want to change music I cannot get back into shuffle mode unless I select the shuffle all songs option.

This is from the Nike support page:
<http://support-en-us.nikeplus.com/app/answers/detail/a_id/20976/p/3169,3171
Shuffle Songs: Plays songs shuffled randomly from your music library. To shuffle a playlist rather than your entire music library, start the playlist in shuffle mode before setting up your Nike+ workout. Then, when setting up your workout preferences, select "now playing" in the Music menu.

I recently purchased the new nano (7th generation) and I love it except for one issue. On my old 2nd generation nano, when I played podcasts, it would play podcasts one at a time. So if I had 20 episodes of a podcast on the device, it would stop at the e

I recently purchased the new nano (7th generation) and I love it except for one issue. On my old 2nd generation nano, when I played podcasts, it would play podcasts one at a time. So if I had 20 episodes of a podcast on the device, it would stop at the end of each one.
With the new nano, I can select and play a podcast, but when it’s over, it goes straight to the next one without prompting. It keeps on playing all of the episodes of any podcast until you stop it manually. Setting the repeat function differently does not prevent episodes from being played automatically.
This can be very irritating when I only want to listen to one podcast. I’ve often fallen asleep listening to one episode of a podcast, only to be woken up hours later by the iPod working its way through all subsequent episodes. It is also annoying that any podcast which has started automatically in this way is marked as ‘played’ – even if you stop it within a few seconds. This makes it hard to keep track of what you have actually listened to.
Is there any way to set the iPod to play all the podcasts individually? I have read the User Guide from cover to cover, and can’t find a way of doing this.
MD

Dude or hot-spur,
Not fishy at all!!!! You really think I would have taken any more of my time to post a bogus rant? We'll no, it is unfortunately all true. I want to hear from anyone who is experiencing such problems not anyone else that wants to put there two cents in. I really don't need anymore hate or negativity. Just people's experiences because I feel like I am the only one having so many problems. Thank you
Yes, I have had some unfortunate bad luck to have so many problems at the same time, but some of them are just things you cannot do on the new OS.
Thank you again

Ipod Nano 7th generation not recognized by computer or iTunes

Neither my computer nor ITunes recognizes my Ipod nano 7th generation. It was working fine until I ran an intensive AVG PC tuneup on the laptop. Device manager recognizes the Ipod and says it is working correctly. I have done all suggested troubleshooting and nothing has yet worked. Additional suggestions or info I should provide?

diagnostic shows....
**** Device Connectivity Tests ****
iPodService 11.3.1.2 (x64) is currently running.
iTunesHelper 11.3.1.2 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
Most Recent Devices Not Currently Connected:
iPod nano (4th Generation) running firmware version 1.0.4
Serial Number: Y(I removed info)
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.
it looks like everything is fine, except it can't find the ipod... why?
when I plug in a thumb drive, it recognizes that, why not the ipod?

My iPod Nano 7th generation is not detected in Itunes

Hey there,
I have a iPod Nano 7th generation and I'm working with a Windows 7 64-bit version.
So when I got my iPod, I installed iTunes and everything went very well..
but today I tried to sync my iPod and it is not even detected from my iTunes or my computer.
I had the error -42110, but I found the solution on here, but it didn't work either.
I went through a lot of questions on here, but I couldn't find any solution for my problem
Has anyone got any idea?

well actually I did connect my iPod 3 days later or so to my charger, because a friend of mine asked me if I'm sure that the cable is not broken. So I connected it and it charged, when I thought "Well let's try on the computer again". I plugged it in and it was detected again.. so uhm I don't really know why it did not worked the last times.
So maybe try to restart your computer and turn off an on again the device and try it later on again.. maybe it will work then:)
I'm sorry I can't help more!

IPod Nano 7th Generation will not turn on

My 10 month old iPod Nano 7th Generation will not turn on - all of a sudden.
All songs on the device have disappeared.
Shows in iTunes - even shows as having a fully charged battery.
Holding Home Button and Sleep/Wake button down, even for a long time, doesn't help.
Have changed USB ports, from computer to AC powered USB charging station.
Help?

Just saw elsewhere on the forum to press and hold the power and home buttons and it fixxed it for me

Ipod Nano 7th generation touch interface is now screwed with due to apple update.

Hi, I recently purchased a new laptop switching over from a macbook pro 2010 of which the logicboard died. In this newly configured windows 7 64 bit laptop I downloaded the latest itunes. I then connected my ipod nano 7th generation to it and it requested to format it since it was formatted for a mac. I did so and restored my ipod nano 7th generation. After this however my previously perfectly working nano touch interface (swiping, touch to select) is now completely messed up. This has to be due to the formatting and/or the new nano update or itunes update from apple. I can't even swipe to the right or left to move between screen interfaces on my nano anymore. As well the touch icons require double taps and have rectangular white selection boxes over each icon (NOT NORMAL)
Overall I am very displeased and want apple to fix this with either a new firmware nano 7th generation update or apple itunes update for windows 7 64bit. I'm thinking of buying a replacement iphone 4 but now that this issue is prevalent how can I TRUST Apple that nothing wrong will occur with connecting a new iphone 4 to my itunes on a windows 7 64 bit PC.
I am NOT the only one with this issue as you can check out for yourself: http://answers.yahoo.com/question/index?qid=20130727205241AAOmiuC
REASON FOR POSTING THIS HERE: I want more exposure to this issue. I couldn't get access to customer support since my ipod nano 7th generation is over a year old. This is cruel but whatever, Apple does what it wants and I will post this here to do what I want. Gain exposure to this defect that clearly Apple is not addressing since the above link displays a user with the same issue and posted the problem 3 months ago.
DO SOMETHING ABOUT THIS APPLE

Hi ImAMinion.
Very good question. I should have explained that part. VoiceOver changes how the navigation functions so it's a little tricky.
From the home screen I got to settings by swiping up and down instead of the normal left and right.
To open settings I first tapped once on the settings icon so that the box appeared around the icon. Then I double tapped the icon to open it.
I repeated the "tap once to get the box then double tap to open" process to navigate through the settings menu. Navigate to: Settings -> General -> Accessibility -> VoiceOver -> set to off. Once it's off the navigation will return to normal.
Hope that helps.

Why is my nano 7th generation only holds 600 songs

Similar Messages

Maybe you are looking for