Why is my SSD showing 250mb/s difference between read and write...

So i have recently upgraded to a SSD in my 2011 MBP. 2.4Ghz i5 16Gb RAM. I swapped my HDD with a Samsung 840 Series 250Gb SSD, I noticed a huge speed bump. See attached photos. Read is clocked at 503MB/s peak, and Write is clocked at 260MB/s peak on the SSD. My Question is why is there a 250MB/s difference between read and write?? Using Black Magic Disk Speed test. Mac OS X 10.8.4 Beta.
Thanks

Writes are performed very differently on SSD than they do on a hard drive, and it is common for SSDs to have lower write speeds than reads.
It's actually quite interesting if you're a geek: http://en.wikipedia.org/wiki/Write_amplification
As long as the speeds do match your manufacturer specification for the model (and they do: http://www.samsung.com/us/computer/memory-storage/MZ-7TD250BW ) , there is nothing to be concerned about.

Similar Messages

What is the difference between MOVE and WRITE TO ststement?

Hi
What is the difference between MOVE and WRITE TO ststement?
When do we use both of them?
Thank You

Hi,
<b>MOVE</b>
Syntax
MOVE source {TO|?TO} destination.
destination {=|?=} source.
Effect
Both these statements assign the content of the operand source to the data object destination. The variants with the language element TO or the assignment operator = are valid for all assignments between operands that are not reference variables, and for assignments between reference variables for which the static type of source is more specific than or the same as the static type of destination(narrowing cast).
Variants with the language element ?TO or the assignment operator ?= (casting operator ) must be used if the source and destination are reference variables and the static type of source is more general than the static type of destination (widening cast). For assignments between operands that are not reference variables, use of the question mark ? is not permitted.
The data object destination can be any data object that can be listed at a write position, and the data object source can be a data object, a predefined function or a functional method (as of release 6.10). The data type of the data object destination must either be compatible with the data type of source, or it must be possible to convert the content of source into the data type of destination according to one of the conversion rules.
Notes
If source and/or destination are field symbols, then, as in all ABAP commands, the system works with the content of the data objects to which the field symbols point. The actual pointer content of a field symbol can only be changed using the statement ASSIGN or the addition ASSIGNING when processing internal tables (value semantics). If source and destination are reference variables, the reference contained in source is assigned to destination (reference semantics).
Strings and internal tables are addressed internally using references. When assignments are made between strings and between internal tables (as of release 6.10), only the reference is transferred, for performance reasons. After the assignment, the actual string or the actual table body of the source as well as the target object are addressed (sharing). When the object is accessed to change it, the sharing is canceled and a copy of the content is made. The sharing is displayed in the memory consumption display of the ABAP debugger and in the Memory Inspector tool (as of release 6.20).
Obsolete Form: MOVE PERCENTAGE
Exceptions
Catchable Exceptions
CX_SY_CONVERSION_NO_NUMBER
Cause: Operand cannot be interpreted as number
Runtime Error: CONVT_NO_NUMBER (catchable)
CX_SY_CONVERSION_OVERFLOW
Cause: Overflow with arithmetic operation (type P, with specified length)
Runtime Error: BCD_FIELD_OVERFLOW (catchable)
Cause: Operand too large or (intermediate) result too large
Runtime Error: CONVT_OVERFLOW (catchable)
CX_SY_MOVE_CAST_ERROR
Cause: Source or target variable are not reference variables
Runtime Error: MOVE_CAST_REF_ONLY
Non-Catchable Exceptions
Cause: Source field (type P) does not contain correct BCD format.
Runtime Error: BCD_BADDATA
Cause: Assignment for deep structures not permitted if these overlap.
Runtime Error: MOVE_COMPLEX_OVERLAP
Cause: Type conflict with the assignment between object references.
Runtime Error: MOVE_INTERFACE_NOT_SUPPORTED,
Runtime Error: MOVE_IREF_NOT_CONVERTIBLE,
Runtime Error: MOVE_IREF_TO_OREF,
Runtime Error: MOVE_OREF_NOT_CONVERTIBLE
Cause: Type conflict with the assignment between data references.
Runtime Error: MOVE_DREF_NOT_COMPATIBLE
Cause: Assignment between the types involved not supported.
Runtime Error: MOVE_NOT_SUPPORTED
Cause: Constants and literals must not be overwritten.
Runtime Error: MOVE_TO_LIT_NOTALLOWED
Cause: onstants and literals must not be overwritten.
Runtime Error: MOVE_TO_LIT_NOTALLOWED_NODATA
Cause: During a loop in an internal table, an attempt was made to overwrite a reference variable that is linked with the internal table by REFERENCE INTO.
Runtime Error: MOVE_TO_LOOP_REF
<b>Write</b>
Syntax Diagram
WRITE - TO
Syntax
WRITE {source|(source_name)} TO destination
                             [int_format_options].
Effect:
This statement assigns the formatted content of the data object source, or the formatted content of the data object whose name is contained in source_name, to the data object destination. The data objects source_name and destination must be character type and flat. source_name can contain the name of the data object to be assigned in upper or lower case. If the data object specified in source_name does not exist, the assignment is not executed, and sy-subrc is set to 4.
The statement WRITE TO has the same effect as the statement WRITE for lists. This statement formats the content of source or the source field specified in source_name as described in the field. It does not, however, store the result in an output area of a list in the list buffer, but instead stores it in a variable. The output length is determined by the length of the variable.
The same additions int_format_options can be specified for formatting the content as in the statement WRITE for lists, except for NO-GAP and UNDER.
System fields
sy-subrc Meaning
0 The data object specified in source_name was found and the assignment was executed.
4 The data object specified in source_name was not found and the assignment was not executed.
For the static specification of source, sy-subrc is not set.
Note:
If destination is specified as an untyped field symbol or an untyped formal parameter, and is not flat and character-type when the statement is executed, this leads to an untreatable exception in a Unicode program. In non-Unicode programs, this only leads to an exception for deep types. Flat types are handled as character-type data types.
Example:
After the assignment, the variables date_short and date_long receive the current date in the order specified in the user master record. The variable date_long also contains the defined separators, as the output length is sufficiently long. The content of the variable date_mask is formatted according to the formatting addition DD/MM/YY.
DATA: date_short(8) TYPE c,
      date_long(10) TYPE c,
      date_mask(8) TYPE c.
WRITE sy-datum TO: date_short,
                   date_long,
                   date_mask DD/MM/YY.
Exceptions
Non-Catchable Exceptions
Cause: Negative length specified for offset/length
Runtime Error: WRITE_TO_LENGTH_NEGATIVE
Cause: Negative offset specified in offset/length
Runtime Error: WRITE_TO_OFFSET_NEGATIVE
Cause: Offset specified in offset/length specification is longer than the field length.
Runtime Error: WRITE_TO_OFFSET_TOOLARGE
Thanks
sunil

Difference between read and view only -users having both permissions can download the documents

Hi All,
Would like to know whats the difference between view only and read permission.
As per my requirement, my end users who have been assigned View Only should NOT be able to Download the document from a doc lib.Whereas who have Read permissions should be able to download.
But when i tested with few users with these permissions, those users who are having viewonly permissions was able to download the documents.
how this will be true? MS says that this is not possible if it contains server side handlers.
my customer worried about the download-the-document part. as per them end users who have view only permissions should not download the docs.

Hi,
Please check this similar thread:
https://social.technet.microsoft.com/Forums/sharepoint/en-US/4b21a168-443b-45d3-940c-fe52e8538290/how-to-protect-sharepoint-document-not-allow-to-download?forum=sharepointadminprevious
Your only option is to implement IRM to accomplish your requirement.
Nico Martens
SharePoint/Office365/Azure Consultant

Why are there print differences between Reader and Acrobat Pro

I have a PDF file generated by InDesign (CS3). When I print the PDF from Reader (8.1.4) I get lighter text than when the same file is printed by Acrobat Pro (9.1.0). A close examination of the printed letters shows that the text printed from Reader is not solid black, while the text from Pro is solid black.
Is this typical or is there something I need to do to improve the printing from Reader?

I am a CADD Coord. (CADD Mgr)designer) I used to do a lot of design. Just recently we have noticed that anything printed from Adobe, the reader or the full version, is printing so lightly in many cases that it looks like it is missing data. whenever we create teh PDF from Autodesk products or Bluebeam Revue, it is the same. Bluebeam prints perfect. Yet the exact same file printed through Adobe is very, very light. Even printing as image it does this. And it appears at random. Some people print ok, but the exact same printer sent by someone else, using the same method, comes out too light in Adobe.
I have contacted Autodesk and they have punted it back. Anyone have any answers or clues to fix? i send out deliverables for clients all the time and I hate to find out they print and miss something of the design.

How to increase disk read and write speed after installing new SSD (2009 Macbook Pro)? Why not as fast as advertised?

Hi everyone,
I just installed a Crucial MX10512 GB SSD into my 2009 Macbook Pro. It's definitely much faster, but the read and write disk speed is around 200 Mb/s for both versus the 300-500 Mb/s that the SSD advertised. Any ideas as to why? And is there anything I can do to make it faster? Before I installed it, it was between 80-90 Mb/s.
Specs:
- currently have about 460 of 511 GB of storage available
- am using 2GB of memory
- running on 10.10.2 Yosemite
Thanks!

nataliemint wrote:
Drew, forgive me for being so computer-incompetent but how would I boot from another OS? And shouldn't I be checking the read speeds on my current OS (Yosemite) anyways because I want to know how the SSD is performing on the OS I use? And finally, what kind of resources would it be using that would be slowing down my SSD?
Sorry for all the questions - I'm not a Macbook wiz by any means!
You could make a clone of your internal OS onto an external disk. Hopefully you already have a backup of some form
A clone is a full copy, so you can boot from it. It makes a good backup as well as being useful to test things like this.
Carbon Copy Cloner will make one or you can use Disk Utility to 'restore' your OS from the internal disk to an external one.
Ideally the external disk is a fast disk with a fast 'interface' like Thunderbolt, Firewire 800 or USB3. USB2 can work, but it is slow & may effect the test.
You connect the clone, hold alt at startup & select the external disk in the 'boot manager'. When the Mac is finished booting run the speed tester.
Maybe this one…
https://itunes.apple.com/gb/app/blackmagic-disk-speed-test/id425264550
Test the internal & compare to the previous tests
A running OS will do the following on it's boot disk…
Write/ read cache files from running apps
Write/ read memory to disk if memory is running low
Index new files if content is changing or being updated
Copy files for backing up (Time Machine or any other scheduled tasks)
Networking can also trigger read/ write on the disk too.
You may not have much activity that effects a disk speed test, but you can't really be sure unless that disk is not being used for other tasks.
Disk testing is an art & science in itself, see this if you want to get an idea …
http://macperformanceguide.com/topics/topic-Storage.html
Simply knowing that it's about twice the speed would be enough to cheer me up

Why doesn't iMessage show when the message is read, all the time?

Why doesn't iMessage show when the message is read, all the time?

It depends on the recipients settings, whether they have read receipts set to on or off. If they have it off, you will not be notified of the actual time they read your message.

Question about the difference between HDDs and SSDs

Hi. I currently have a MacBook (Black one) that's overheating a lot for the past few months. I'm thinking about purchasing a MacBook Pro for school because it seems to be more stable. I have a question though. What is the difference between HDDs and SSDs? Which one is better? All I know is that with my MacBook and my iBook is that I had hard drive failures (iBook hard drive clicking, MacBook hard drive sounding loud and making my computer overheat). Are hard drive failures normal with Macs?
Thank you

astoldbywesley wrote:
Is a 128GB Solid State Drive better than a 500GB Serial ATA Drive @ 5400 rpm or 500GB Serial ATA Drive @ 7200 rpm?
Depends what you mean by "better." Faster? Yes. The 500 has 3x more storage capacity.
Message was edited by: tjk

Difference between 32 and 64 and why is 64 your preference

Hi, can someone please explain the difference between 32 and 64 bit and why the 64 is a preference for some of you? I'm more concerned about peripherals and printers working with Vista Ultimate on 64bit, before purchasing and installing CS4 onto a new computer. Thank you.

Bear in mind that to run 64 bit you need (a) a computer able to do
this and (b) the 64-bit edition of Vista (not the normal one).
Good things:
* Can run 64-bit programs that use more than 2 GB (Photoshop CS4 will
be one of these).
* Can use more than 3 to 3.5 GB of RAM in total
* Each program can use up to 2 GB (if available)
* The excess is available for cacheing disk
Bad things
* Driver and software availability needs checking. Little things may
not work (e.g. in Acrobat, PDF preview in icons). Or big things.
* 64-bit applications will need 64-bit plug-ins
* Less mainstream, overall support may be more limited if things don't
work.
* 64-bit programs are a little larger and use a little more RAM than
their 32-bit equivalents.
Myths
* "64 bit programs will go faster than 32 bit programs". Myth, unless
the program can make use of more than 2 GB of RAM.
* "All programs will go faster in 64 bit Windows". Myth, unless the
extra memory you can use reduces the amount of disk operation.
Aandi Inston

Why would i connect a external hardrive to the airport extreme and what is the difference between LAN and WAN gigabit ethernet?

Hey just wanted to know what is the reason i would connect my external hardrive to the extreme and what is the difference between LAN and WAN ehternet. I know one is local and other is wide but can someone explain in simpler terms.

Connecting a hard drive to the Airport Extreme makes it available to be shared across all the computers on your network.
WAN (Wide Area Network) is your connection to the internet
LAN (Local Area Network) is your internal (or local) ethernet connections (computers, printers, etc...)
AirPort Base Station: About the WAN and LAN Ports

Looking for new laptop what are the differences between pro and air? Besides size. Does the air preform like the pro?

Looking for new laptop what are the differences between pro and air? Besides size. Does the air preform like the pro?

The NEW macbook Pro and Air are EXTREMELY close in form factor
The newest macbook Pro is essentially a larger macbook Air with Retina display and options for speed in increasing prices up to an independent graphics and quad core processor.
both Air and new Pro now have PCIe SSD and permanent RAM.
The Air is the lightweight portable form factor, fast to boot and shut down, but with longer battery life than any of the macbook pro in 13"
Now the new macbook Pro and macbook Air are extremely close in form factor and nature.
both have 802ac wifi
both have permanent RAM, no superdrive
both are slim profiles and SSD
The only real differences now are (in the most expensive Pros) faster processors and quadcore processors and top end model autonomous graphics.
....and of course the retina display
both are now "very good for travel"
Other than features the form factor of the Air and Pro are VERY close now,....so now its merely a matter of features and price more than anything.
You need an external HD regardless of what you get for backups etc. Drop into an Apple store and handle both and make your choice based on features, such as Retina or non-retina, .... both at a distance now look like the same computer.
The Pro weighs more, ....but nowhere near what it used to just a month ago on the older macbook Pros
The NEW macbook Pro is a different creature entirely than the older macbook Pro, .....the new Pro is thicker than the Air, but id frankly call the NEWEST Pro a "macbook Air with Retina display" , or
Maybe a “macbook Air PRO with Retina display”
Instead of Air VS Pro now,.....its really a smooth transition from Air to pro without comparing say, 2 different creatures, now its like contrasting a horse from a race horse.
Either one in 8gig of RAM (preferably)... the 4gig upgrade costs very little, the I7 you will notice only 15% faster on heavy applications over the I5, and NOTHING on most APPS.....I5 has longer battery life.
As you see below, the non-Retina 13" AIR is 82% of the Macbook with Retina display in resolution
there is no magical number of pixels per inch that automatically equates to Retina quality.
http://www.cultofmac.com/168509/why-you-might-be-disappointed-by-the-resolution- of-those-new-retina-display-macs-feature/
A huge internal SSD isnt a game changer for anything, you need an external HD anyway
what you WONT READ on Apple.com etc. is that the larger SSD are MUCH FASTER due to SSD density
"The 512GB Samsung SSD found in our 13-inch model offers roughly a 400MB/s increase in write speeds over the 128GB SanDisk/Marvell SSD"
http://blog.macsales.com/19008-performance-testing-not-all-2013-macbook-air-ssds -are-the-same
Here is an excellent video comparison between the 11” I5 vs. I7 2013 Macbook Air.
http://www.youtube.com/watch?v=oDqJ-on03z4
http://www.anandtech.com/show/7113/2013-macbook-air-core-i5-4250u-vs-core-i7-465 0u/2
I5 vs. I7 performance 13” Macbook Air 2013
Boot performance
11.7 I5 ……11.4 I7
Cinebench
1.1 I5….1.41 I7
IMovie Import and Opt.
6.69 I5….5.35 I7
IMovie Export
10.33 I5…8.20 I7
Final Cut Pro X
21.47 I5…17.71 I7
Adobe Lightroom 3 Export
25.8 I5….31.8 I7
Adobe Photoshop CS5 Performance
27.3 I5…22.6 I7
Reviews of the newest Retina 2013 Macbook Pro
13”
Digital Trends (13") - http://www.digitaltrends.com/laptop-...h-2013-review/
LaptopMag (13") - http://www.laptopmag.com/reviews/lap...play-2013.aspx
Engadget (13") - http://www.engadget.com/2013/10/29/m...-13-inch-2013/
The Verge (13") - http://www.theverge.com/2013/10/30/5...ay-review-2013
CNet (13") - http://www.cnet.com/laptops/apple-ma...-35831098.html
15”
The Verge (15") - http://www.theverge.com/2013/10/24/5...w-15-inch-2013
LaptopMag (15") - http://www.laptopmag.com/reviews/lap...inch-2013.aspx
TechCrunch (15") - http://techcrunch.com/2013/10/25/lat...ok-pro-review/
CNet (15") - http://www.cnet.com/apple-macbook-pro-with-retina-2013/
PC Mag (15") - http://www.pcmag.com/article2/0,2817,2426359,00.asp
Arstechnica (15") - http://arstechnica.com/apple/2013/10...-pro-reviewed/
Slashgear (15") - http://www.slashgear.com/macbook-pro...2013-26303163/

Exact difference between function and procedure

exact difference between function and procedure(real time diff.....not like return value, dml....) and function do some work at the same time that work also do procedure..why function

ranitB wrote:
1. Function is called Inline a query. A return value is must.
But, procedure may/may not contain a return value.Not true.
A function may be called in a query providing it meets certain limitations (no DDL, or transactional statements such as commit/rollback etc.).
A function does not have to be called from a query, it can be called from other PL/SQL code or from other external applications.
Regular functions must return a value, though pipelined functions do not...
SQL> CREATE OR REPLACE TYPE split_tbl IS TABLE OF VARCHAR2(32767);
2 /
Type created.
SQL> CREATE OR REPLACE FUNCTION split (p_list VARCHAR2, p_delim VARCHAR2:=' ') RETURN SPLIT_TBL PIPELINED IS
2      l_idx    PLS_INTEGER;
3      l_list   VARCHAR2(32767) := p_list;
4      l_value VARCHAR2(32767);
5    BEGIN
6      LOOP
7        l_idx := INSTR(l_list, p_delim);
8        IF l_idx > 0 THEN
9          PIPE ROW(SUBSTR(l_list, 1, l_idx-1));
10          l_list := SUBSTR(l_list, l_idx+LENGTH(p_delim));
11        ELSE
12          PIPE ROW(l_list);
13          EXIT;
14        END IF;
15      END LOOP;
16      RETURN;
17    END SPLIT;
18 /
Function created.
SQL> SELECT column_value
2 FROM TABLE(split('FRED,JIM,BOB,TED,MARK',','));
COLUMN_VALUE
FRED
JIM
BOB
TED
MARK... whilst the definition of the function shows a return type, the return statement inside the function simply returns, without a value. That's because the data is passed back through a special "pipeline", and you can write code to show that the data is available to a query as soon as it's piped, and before the function has completed (reached the return statement) if you like.
A procedure does not return a value (And no an OUT parameter is not a "returned" value, it's a writeable parameter, there's a difference)
2. There are some limitations in functions which is possbl through procedures.
Like - Oracle doesn't support DML in functions called in Select queries (using PRAGMA AUTONOMOUS_TRANSACTION will help).Not strictly true. and SQL query is considered to be DML, so a function could perform a query and then be used inside another query...
SQL> ed
Wrote file afiedt.buf
1 create or replace function f_dname(p_deptno in number) return varchar2 is
2    v_dname varchar2(10);
3 begin
4    select dname into v_dname
5    from   dept
6    where deptno = p_deptno;
7    return v_dname;
8* end;
SQL> /
Function created.
SQL> ed
Wrote file afiedt.buf
1* select empno, ename, f_dname(deptno) as dname from emp
SQL> /
     EMPNO ENAME      DNAME
      7369 SMITH      RESEARCH
      7499 ALLEN      SALES
      7521 WARD       SALES
      7566 JONES      RESEARCH
      7654 MARTIN     SALES
      7698 BLAKE      SALES
      7782 CLARK      ACCOUNTING
      7788 SCOTT      RESEARCH
      7839 KING       ACCOUNTING
      7844 TURNER     SALES
      7876 ADAMS      RESEARCH
      7900 JAMES      SALES
      7902 FORD       RESEARCH
      7934 MILLER     ACCOUNTING
14 rows selected.It's been discussed many times on the forum... my favourite here...
{message:id=1668675}
Edited by: BluShadow on 17-Sep-2012 09:22

Difference between procedure and function

hi
please give solution to below discussion:
Interviewer: What is the difference between Procedure and Function ?
Myself: Procedure may or may not return a value and can return multiple values and Function must return a value.
Interviewer : Can function return multiple values ?
myself: Yes, It can return multiple values.
Interviewer: Then, there is no need to use procedures any more, according to your previous answer (function can return multiple values) "we can do all the things by using procedures by using functions". Then why there is differentiation between procedure and function ?
myself : no reply (simply frustated at this question)
The above is conversation between me and interviewer.
Please suggest me what would be my reply to above topic.
In one book i find that using functions we can return multiple values but it is poor programming practice.
why this is a programming practice ?
please suggest me solution
thanks in advance
prasanth as.

Another difference is function must return something. There is no such restriction on procedure.In fact, a procedure CANNOT contain an expression in its RETURN statement.
SQL> create or replace procedure test_return is
2 begin
3    return(10) ;
4 end ;
5 /
Warning: Procedure created with compilation errors.
SQL> show errors
Errors for PROCEDURE TEST_RETURN:
LINE/COL ERROR
3/3      PLS-00372: In a procedure, RETURN statement cannot contain an
         expression
3/3      PL/SQL: Statement ignored
SQL>And, a procedure cannot be called as part of a expression (it must be a function).
SQL> create or replace procedure test_return is
2 begin
3    return ;
4 end ;
5 /
Procedure created.
SQL> variable x number ;
SQL> exec :x := test_return ;
BEGIN :x := test_return ; END;
ERROR at line 1:
ORA-06550: line 1, column 13:
PLS-00222: no function with name 'TEST_RETURN' exists in this scope
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
SQL>

What is the difference between #variable_name and :variable_name?

Hi!
What is the difference between #variable_name and :variable_name?
I have found that if we use alphanumeric variable then :variable_name return value in quotes but #variable_name without quotes.
Why it does not work in the same way for variable default values when variable is used in filter? (It works in mapping)
I use variable in filter like T.OUT_DATE>convert(datetime,:LAST_UPDATE_DATE,121)
When I use my variable in package and do refresh it works fine. But when I try to execute the same interface with variable default value I get error. Seems that variable name has been not changed to the value. It does not work with default value in quotes neither without quotes.
Any ideas how to solve that?
Thank you in advance!
Edited by: user13278245 on Sep 15, 2010 4:34 AM

Question is how to make it work with default value, when I execute interface standalone, not in package? And why it works in mapping but not in filter?
+ I have found that it works if source is Oracle. It doesn't work only for MS SQL source.
Edited by: user13278245 on Sep 15, 2010 6:43 AM

What is the difference between LH and LX modules?

I would like to know the difference between LX and LH SFP modules. Long Haul ( LH ) denotes longer distances while Long Wavelength ( LX ) denotes less energy which is obviously shorter distance. Why does Cisco use both LX and LH for certain SFP modules?
Do they denote the capability of the module to work both for MM ( which will be Long wavelength ) and SM ( Long Haul ) fiber? Do correct me if i am wrong.
What does it infer if a modules says like "Cisco 1000BASE-LX/LH SFP" ?

What does it infer if a modules says like "Cisco 1000BASE-LX/LH SFP
Generally a module is either made for single mode (More distance) / multimode (short distance). But this module can be used for both Single mode and Multimode.
If used with SM fiber it can go upto 10Km
It used with MM it can go upto 550meters (depend on what kind os MM fiber you have) You need a mode conditioning patch chord too with legacy MM i think OM1 and 2.
Long Haul ( LH ) denotes longer distances while Long Wavelength ( LX ) denotes less energy which is obviously shorter distance. Why does Cisco use both LX and LH for certain SFP modules
Read this link and dont worry about LX/LH (You will ge tthe distance mentiond above depending on the type of fibe ryou are using)
http://en.wikipedia.org/wiki/Gigabit_Ethernet
Before it was standardized 1000BASE-LX10 was essentially already in widespread use by many vendors as a proprietary extension called either 1000BASE-LX/LH or 1000BASE-LH

What is the difference between start() and run()

Hi:
what is the difference between start() and the run()???
in my app, i have
Console.debug( "starting thread to listen for clients" );
_server = new Server( this );
_server.start();
_server extends Thread..
why everytime i use server.start(); my app will terminate on it is own, even though in my servr.run() method, i have a while loop
and if i call _server.run() explicitly in my code, that while loop will be in execution
can someone let me know??
thnx

what is the difference between start() and the
run()???start() is a method on Thread that tells it to start.
run() is a method in the object that the thread executes.
why everytime i use _server.start(); my app will
terminate on it is own, Err.... I'm not convinced this is true. It'll throw an IllegalThreadStateException, if you try to restart an existing thread.
If that's what you're saying.
even though in my _servr.run()
method, i have a while loopI don't see the connection. Are you saying that the while loop never terminates, and you don't see why the thread is terminating?
and if i call _server.run() explicitly in my code,
that while loop will be in executionIf you call server.run() explicitly, then run() will be executed in the same thread that you called it in.

Why is my SSD showing 250mb/s difference between read and write...

Similar Messages

Maybe you are looking for