Why is Scanner final?

Any ideas why the new Scanner class is final? I'd like to do something like
public ScannerSE extends Scanner
public int nextInt(int lo, int hi)
{    int i = this.nextInt( );
if (i < lo || i > hi)
{    throw new InputOutOfBoundsException("Expected a number between " + lo + " and " + hi + " but got " + i);
Thanks!
Byron
PS: How do you get leading spaces to show in the newsgroup post?

There is a link at the top of the page called special tokens.
I don't know anything about the Scanner class. You need to ask the person who wrote the class why it is final.
    public class ScannerSE extends Scanner {
        public int nextInt (int lo, int hi) {
            int i = this.nextInt();
            if (i < lo || i > hi) {
                throw new InputOutOfBoundsException("Expected a number between " + lo + " and " + hi + " but got " + i);
    }

Similar Messages

  • Why does my final cut pro is not responding every time I open it????!!!!!!

    why does my final cut pro is not responding every time I open it?

    As you give no background info nobody can possibly guess.
    However, have you tried trashing the preferences?
    Many weird things happen as a result of corrupt preferences which can create a vast range of different symptoms, so whenever FCP X stops working properly in any way, trashing the preferences should be the first thing you do using this free app.
    http://www.digitalrebellion.com/prefman/
    Shut down FCP X, open PreferenceManager and in the window that appears:-
    1. Ensure that only  FCP X  is selected.
    2. Click Trash
    The job is done instantly and you can re-open FCP X.
    There is absolutely no danger in trashing preferences and you can do it as often as you like.
    The preferences are kept separately from FCP X and if there aren't any when FCP X opens it automatically creates new ones  .  .  .  instantly.

  • Why does our Final Cut Pro Batch Exports incorrectly name sequence files?

    Why does our Final Cut Pro 7.0.1 Batch Exports incorrectly name sequence files?
    For example I can Batch Export 10 sequences one of which is called:
    "899-006TL013 It's Not Your Fault 800-509-2875"
    Then the output for some of the files are along the lines of:
    "899-006TL013 It's No#61386E.mov"
    I have seen this happen with 1-6 files or not at all... is it just dumb luck?
    What is going on here and is there any way to avoid or remedy this issue?
    We first thought having the render destination window open caused it but that was not the source.
    Any ideas?

    I've run into the same problem with FCP 7.0.2 when exporting from the sequence using File --> Export --> QuickTime Movie. I exported a file today called "BSP - 01 - How You Can Be Sure You Are A Christian" and it came out as this "BSP - 01 - How You Can#1630". This is getting to be annoying. I also need to name these files the length they are. I'm hoping someone may see this and have a suggestion (besides shortening the file name). It seems like I've also seen this on shorter file names, but at the moment I can't prove it.

  • HT4743 Why is the Final Episode of The Bachelor, Season 18 not available on iTunes?

    Why is the Final Episode of the Bachelor, Season 18 not available on iTunes yet?

    If you are new to user forums it is expected that you will search though the exiting posts to see if a question is already answered before making a redundant post.  And this has already been answered more times than any one can count.

  • Why does my final cut express movie flicker after i put on disk using idvd

    Why does my final cut express movie flicker after burning to a dvd using idvd.  Its about 90 minutes long.

    Hi
    As Alchroma writes - more info needed.
    FCE/P to iDVD
    Several things
    • How to go from FCE/P to iDVD
    • Free space on Start-up hard disk
    • Encoding
    • Brand and type of DVDs used
    • Burn speed set
    • iDVD BUG
    • Chapters
    How to go from FCE/P to iDVD I do
    • Disable Screen and Energy saver
    • IMPORTANT --> FIRST in FinalCut - Mix Down Audio under Sequence Menu / Render Only / Mix-down
    • Export out as a QuickTime .mov file
    • Select with Mark - Chapter Mark
    • Not as Self-Contained (not important but saves time and space)
    • NO QUICKTIME CONVERSION (IMPORTANT)
    This QT.mov file I import into iDVD from within iDVD.
    Free space on Start-up hard disk
    I set a minimum of 25GB (for Mac OS and iDVDs temp files)
    Encoding
    • I use Pro Quality encoding
    Brand and type of DVDs used
    • I use Verbatim
    • I use DVD-R
    Burn speed set
    • I set down this to x4 (or x1)
    iDVD BUG
    • One can not go back to movie-project for any alterations and then go back to
    the iDVD project. It will notice and ask You to either Up-date or Cancel. Neither
    of them will work.
    Medicine - Start a brand new iDVD project.
    Use of Chapters
    • I only use a to z and 0 to 9 in naming them. NO other symbol/letter !
    • NO Chapter-mark at very beginning - iDVD NEEDS TO set this by it self
    • No Chapter marks in or within two seconds from a transition
    (Way around this last one - Export movie as QT full quality and NO Chapter marks
    Import this into a new Movie-project and now You are free to set C-Ms where You want
    them except at very beginning - still)
    Material used to build movie
    • video - I use streamingDV (or convert all other to this e.g. .mp4, .avi, .wmv etc)
    • audio - I use .aiff 16-bit 48kHz or from Audio-CD (44.1kHz) - no .mp3 or direct from iTunes
    • photos - I use .jpg - no .bmp etc
    Trash iDVD pref. file and run Repair Permissions - and have a re-try.
    from post ??
    May not be relevant, but I had the same problem with iDVD, where burned DVDs showed a green screen. It was cured by quitting Quicksilver and Quickeys as well as disabling sleep and screen-saving
    Yours Bengt W

  • Question why In the final phase of installing OSX it will not recognize my password

    Why in the final phase of installing OSX Maverick it will not recognize my password?

    Administrator account password.

  • Has anyone solved why the scanner would cause ARD to freeze

    If I try to scan a network range, it comes back with nothing.  If I click on my list, it r-authenticates with every machine.  I can Control or Observe machines with no problem.  The scanner seems to be the issue.

    Are you asking why it happens or how to get around it?  There have been several threads that
    1.  Can control/observe
    2.  Can't copy
    3.  Can't install
    4.  Can't scan a network range but can scan bonjour.
    Is that your issue?  No one has come up with a why or a permanent fix but the best I've seen for reducing the annoyance somewhat is
    Select Remote Desktop Preferences and task server.
    Set ARD to use a task server - for me it works best to put in the ip of the ARD admin computer I am at
    Then (if necessary - sometimes it pops back on its on) revert back to using this computer.
    This does it for me for anywhere from hours to days.  But not permanently.

  • Why don't Final Cut make 4:3 format?

    Why is it that when I make a project in Final Cut that is 4:3 / 1440x1080 - it shows up as 16:9 in the editor??

    I'm guessing that by default, fcp sees 1440 x1080 is a 16:9 format with a rectangular pixel aspect ratio even the the sequence settings shows the pixel aspect ratio as square.    To make a 1440x1080 4:3 sequence, try changing the aspect ratio from HD to custom in the sequence settings.  Just tried it and it seems to do it.
    The whole question of pixel aspect ratio is guaranteed to make you crazy.

  • Why finger scanner doesn't recognize already given finger scanning.

    Hi team,
    Device is accepting same finger scanning, it should either prompt with a message this finger scanning already exist?

    If I'm understanding you correctly why would you want to do that and why would you need a message telling you your finger has already been scanned? You have a number of entry points for different fingers and can be labeled which finger was used. It seems redundant to have a message come up telling you you've already used that finger when setting it up.

  • Why doesn't Final Cut Pro X update songs from Garageband?

    While working on a short film in Final Cut Pro X, I worked up a simple sound track in Garageband. I imported the Garageband project, aligned it, and discovered that I'd mistimed one of the sound transitions.
    So, I went back to Garageband and updated the transition, moving the sound effect to the right spot to match up to the video, and then went back to FCPX. I dragged the Garageband project onto the original copy that I'd imported, and selected "replace" and ended up with... the original. After some experimenting, I actually went and deleted an entire track from the Garageband project and reloaded it in FCPX... still no change. How can I fix this?

    Here's an update...
    I made some changes to the Garageband track and saved it as another project... Final Cut refused to even detect it until I restarted Final Cut.
    I have a sound effect that's placed at 1:32 in Garageband, and it ALWAYS plays at 1:31 in Final Cut, no matter how shift it around in Garageband. After changing the song in Garageband and sharing it to disk, I verified that the sound effect is happening at 1:32 by playing it back in Quicktime, so it must be Final Cut that's misbehaving.

  • Why is updating final cut pro such a nightmare for all users?

    How come I cant get back to final cut pro 6.0.3? Or 6.0.4? These were a stable version of FCP for MY SET UP..... I can not find how to get back to these versions. All that I see is pro updates, or updates using apples software update, that will just get me back to 6.0.6, a version of FCP that my plugins dont work under.
    Is there a secret place where 6.0.3 lives that I dont know about? I have seen reports saying there is no more way to get back to 6.0.3 or certain levels of FCP.
    This truly is a nightmare. This is coming from a 10 year user of logic, a program that was bought from a german company by apple, and intergrated into their own product line of apple products. With logic, I can go back to 7.2.3 if I wanted to, or logic 8.0.2, if thats the set up that works for me with my plugins. Is this even possible?

    When item(s) are available in Software Update, go to the menu bar > Update.
    Activate the option *Install and Keep Package*
    The individual Installers will be saved at: Hard Drive/Library/Packages.
    Now, stop cherry picking the advice you have been given over the past few days. Copy the contents of your User space to an external drive. Bite the bullet and reinstall Mac OS X. Run Software Update and accept everything. Repair Permissions and restart the computer when it is done.
    Install Final Cut Studio. Run Software Update and accept everything. Repair Permissions again and restart the computer when it is done.
    Install other software from their original discs or download them again.
    Copy the contents of the folders from the old User space back to the folders with the same name in your new User space. *Do not copy the contents of the Library folder*.
    When you have done that, post back and I will help you retrieve your email and third party fonts.

  • WHy don't Final Cut Pro 7 recognize my sony hdr-sr11 camera.

    Final cut won;t recognize the camera for log and capture. iMove doesn't recognize it either. Help

    That's an AVCHD camera.
    You connect it with a USB cable and use Final Cut Pro's *Log & Transfer* function to bring in the clips.
    [AVCHD workflow in FCP.|http://documentation.apple.com/en/finalcutpro/professionalformatsandworkfl ows/#chapter=6%26section=0]

  • Why won't Final Cut or Motion render my content properly?

    About 2 months ago I got a new 2013 27" iMac with the upgraded i7 processor, 4GB of VRAM, and 32GB of RAM. I've recently come across a problem with rendering in Final Cut Pro X and Motion 5. In Final Cut when I play back a clip in the event browser or in the timeline before rendering, the clip looks fine. When it's done rendering, though the clip looks like the frames are jumbled and the clip is choppy and unusable. A similar thing happens in Motion 5. When I create a RAM preview, certain parts of the composotion that are moving look almost split, like a really dramatic rolling shutter effect on a bad camera. It also put on random shapes that vary from black and white stripes in a lower corner, or frames that are completely white, or green rectangles in the corners. These appear in any file I export from Motion, too.
    I've tried deleting my Final Cut preferences, but the problem still persists.
    I'm not sure if this is a problem with the software, if the graphics card is fried, or if there's a problem with my RAM.

    I haven't heard of software problems causing those kind of symtoms.
    Try running the Apple Diagnostics test (of the Apple Hardware Test) to see whether it reports something.
    Russ

  • My macbook pro see my canon HV30, why won't Final Cut Express?

    any NEW suggestions?
    I have tried trashing the prefs, starting things in different orders....
    I am very frustrated.

    I had similar problems. Here's what I did, and now it works. Not sure which part made it work, but hopefully this is helpful:
    Open FCE HD.
    Connect HV30 via Firewire on the back of the HV30.
    Make sure HV30 is on and in "Play" mode.
    Make sure the screen of the HV30 is closed.
    In FCE HD, go Final Cut Express HD > Easy Setup... > DV-NTSC FireWire Basic >Setup.
    In FCE HD, go File > Capture...
    It seems odd that the screen being open may have caused a problem, but it worked after I closed the screen. Of course, I also fiddled with other things, so who knows?
    Good luck.

  • Why is my final cut pro so slow?

    I just started using final cut pro on my iMac and I've noticed the performance is horrible. I have an event with about 20-30 clips in them, each 10-20 seconds long. The videos are shot using a DSLR using 60p with the AVCHD format. Even when I tried to scroll the event browser, the lag is 2-3 seconds long. The panel doesn't even scroll smoothly.
    Here are my specs of the iMac.
    Hardware Overview:
      Model Name:          iMac
      Model Identifier:          iMac13,2
      Processor Name:          Intel Core i5
      Processor Speed:          2.9 GHz
      Number of Processors:          1
      Total Number of Cores:          4
      L2 Cache (per Core):          256 KB
      L3 Cache:          6 MB
      Memory:          24 GB
      Boot ROM Version:          IM131.010A.B05
      SMC Version (system):          2.11f14
    Do I need a better machine to operate final cut pro?

    It is stored in my external drive, a thunderbolt raid drive. LaCie 5big.
    http://www.lacie.com/products/product.htm?id=10607

Maybe you are looking for

  • Installing version 8.0 or 8.1.1 on Windows Vista

    Error 1935 -- installation will not complete. I have lost my pdf files for Version 7 and cannot download this new version.

  • Doubts in ale/idoc

    hi abapers please guide me 1. what is process code why use this? 2. what is collect idoc in partner profile? 3. diffrences between enhance idoc custom idoc and extending idoc?

  • Error.'_CF_checkboxposition' is undefined

    I have a form named 'boxdetail.cfm' and it has 2 buttons in the form. It calls form 'boxposition.cfm'. Everything works fine except when I click the any button there is an error "error.'_CF_checkboxposition' is undefined". I looked into the source an

  • Get latest order for a scheduled maintenance plan

    Hi experts, I have a requirement where i have to get the order id for a scheduled Maintenance plan.My scenario is explained as below: A maintenace plan is scheduled and as a result of it an order will be created automatically  by system. Now i have t

  • Need of more than one synchronized methods

    Inside my run method I'm calling a synchronized method which in turn calls other synchronized methods of the same and another class. Now if the top level method is synchronized, does the need to make other methods synchronized still remain ? Won't th