Why is the Body-copy of my outgoing emails duplicated?

People have been telling me that when they receive an e-mail from me, the contents are duplicated. Immediately below my message is a duplicate of the message, signature etc. It's odd, and irritating because it does not look very professional. Anyone got any ideas as to why this is happening?

Try turning the account off and on : Settings > Mail, Contacts, Calendars , then tap the account on the right, slide Mail to 'off', exit settings and go back into the Mail app, and then go back to Settings and slide Mail back to 'on'
If that doesn't work then try closing the Mail app completely : from the home screen (i.e.not with the Mail app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
Also do a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Similar Messages

  • Why is the body/content of all my emails invisible except for a few lines in the small preview pane?

    The body/content of my emails is invisible in the large/main part of the screen when using the mail app on my iPad.  I can see some of the text from each email in the small preview pane on the left side of the screen (when holding iPad in landscape orientation).  The only way I can read the content of an email is to forward or reply and then the body/content appears.  How do I fix this problem??

    Try turning the account off and on : Settings > Mail, Contacts, Calendars , then tap the account on the right, slide Mail to 'off', exit settings and go back into the Mail app, and then go back to Settings and slide Mail back to 'on'
    If that doesn't work then try closing the Mail app completely : from the home screen (i.e.not with the Mail app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    Also do a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • Why is the body area of my site a different size in the preview view than than in the design view?

    Why is the body area of my site a different size in the preview view than than in the design view?

    Why is the body area of my site a different size in the preview view than than in the design view?

  • Why is the body of text a picture

    Hello
    Why is the body of text a picture after converting PDF to DOC?

    Hi CrazyFred,
    Have you tried triple-clicking in the Word document to select text? If that doesn't work, we'll want to take a closer look at how the original PDF was created, as that can have an affect on how well the PDF converts. Please see Will Adobe ExportPDF convert both text and form... | Adobe Community. If the PDF was created by a third-party PDF producer, it may not be well-written, and that can lead to conversion issues.
    You can tell how the PDF was created by choosing File > Properties when the PDF is open in Reader. The PDF Producer is listed on the Description tab.
    Best,
    Sara

  • HT3529 when i send a text/imessge why does the person recieving it see my email address instead of my name?

    when i send a text/imessage why does the person receiving it see my email address instead of my name??

    iMessage requires both parties be using iOS 5. The iPhone 3 can not be upgraded to iOS 5, thus messages would be sent as an SMS (Text message)
    Stedman

  • Why is the  finder copying before burning?

    I was just preparing my first dvd backup using the finder to burn the dvd and I was surprised that as I dragged items to the dvd disc to prepare for burning, it seemed to be actually copying these items to some location before I could burn the dvd. I could hear my hard disk copying the files and the process took about 8 minutes to copy over the 3.88 GB of files.
    Shouldn't the files simply be burned to the dvd from their current hard disk locations onto the dvd?
    For example, when I burn a cd from iTunes it doesn't need to copy the files to some other location first.
    So my question is why is the finder doing all of this copying before it burns the disc?
    PowerMac G5   Mac OS X (10.3.9)  

    Panther creates a hidden disk image file, copies all the files to it, burns, verifies, then deletes the hidden disk image file. This is a reliable way to do it. There is no danger of the burn files changing during the burn, or verify, and since it is just burning one big file, there is less disk head movement, so less chance of not keeping up with the optical drive. With larger and faster, optical drives, though, it added an unacceptable amount of time to the burning process, and required a lot of free space on the system disk. Tiger uses burn folders that just contain aliases of the files to burn, and burns the data directly from the original files. It is a lot faster but you do have to be careful not to burn file that may change, such as log or preference files. Newer optical drives have underrun protection, so burning scattered files does not cause a problem. The drive will just slow down if the computer can't feed the data fat enough.

  • Why does the body of the email vanish??

    I have the most annoying issue with mail that is beginning to wind up my clients!
    About one in five of the emails I send appear in the other person's inbox with no text in the body of the email – instead, the text is attached in a file (the name of which is something along the lines of ATT1234567.txt). I've narrowed it down, and it seems to be when I've formatted the text (bolds, lists etc) and I think it's when I combine this with attaching another file, commonly a draft PDF I'm sending for approval.
    Colleagues know now to check for an attachment and read my comments, but clients just think I'm rude, when they get a PDF sent with no text from me! Any help would be sooooooooo appreciated.

    Are you using RTF for message composition or Plain Text?
    If RTF, try using Plain Text instead when sending messages thru an Exchange Server. Windows Outlook does the same when using RTF for message composition but sending messages thru an Exchange Server also has an effect.
    http://www.webopedia.com/TERM/T/TNEF.html
    http://www.dwheeler.com/essays/microsoft-outlook-tnef.html

  • Why dont the body of my emails appear?

    I'm viewing emails and the body of the email is not appearing.  Only when I Reply, do i see the body.   I am travelling abroad and the connection is slow.   Could that be the issue?  Or is there some setting that is preventing the body of the email from appearing.

    Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank and then power ON again in the normal way.] It is app and data safe!

  • The body in SAP Smart Forms email message

    Hi Experts,
    i have a requirement, in smart forms, we did the form to be sent to the email as pdf. we want to add some text in the body of the emil message. can we do this?

    the following is the code for send the mail with both subject and body .plz go thru. hope it will be helpful.
    Creating the document to be sent with success message.
      IF gt_error IS INITIAL.
        gs_doc_chng-obj_name = 'Standard Price'(010).
    gs_doc_chng-obj_descr = 'Material Standard Price update Successful'(011)
    gs_objtxt = 'Materials updated Sucessfully with new Standard Price'(012)
        APPEND gs_objtxt TO gt_objtxt.
        LOOP AT gt_success INTO gs_success.
          gs_objtxt = gs_success.
          APPEND gs_objtxt TO gt_objtxt.
        ENDLOOP.
      ELSE.
    Creating the document to be sent with error message.
        gs_doc_chng-obj_name = 'Error Price'(002).
    gs_doc_chng-obj_descr = 'Material Standard Price Updation Errors'(003)
        gs_objtxt = 'The following Material Numbers failed to update'(004).
        APPEND gs_objtxt TO gt_objtxt.
        LOOP AT gt_error INTO gs_error.
          gs_objtxt = gs_error.
          APPEND gs_objtxt TO gt_objtxt.
        ENDLOOP.
        IF gt_success IS NOT INITIAL.
    gs_objtxt = 'Materials updated Sucessfully with New Standard Price'(012)
          APPEND gs_objtxt TO gt_objtxt.
          LOOP AT gt_success INTO gs_success.
            gs_objtxt = gs_success.
            APPEND gs_objtxt TO gt_objtxt.
          ENDLOOP.
        ENDIF.
      ENDIF.
      DESCRIBE TABLE gt_objtxt LINES gv_tab_lines.
      READ TABLE gt_objtxt INTO gs_objtxt INDEX gv_tab_lines.
    gs_doc_chng-doc_size = ( gv_tab_lines - 1 ) * 255 + STRLEN( gs_objtxt )
    Creating the entry for the compressed document
      CLEAR gs_objpack-transf_bin.
      gs_objpack-head_start = 1.
      gs_objpack-head_num   = 0.
      gs_objpack-body_start = 1.
      gs_objpack-body_num   = gv_tab_lines.
      gs_objpack-doc_type   = 'RAW'.
      APPEND gs_objpack TO gt_objpack.
    Entering names in the distribution list
      IF p_plist IS NOT INITIAL.
        gs_reclist-receiver = p_plist.
        gs_reclist-rec_type = gc_c.
        APPEND gs_reclist TO gt_reclist.
        CLEAR gs_reclist.
      ENDIF.
    Populating the reciever list
      gs_reclist-receiver = p_plist.
      gs_reclist-rec_type = gc_u.
      APPEND gs_reclist TO gt_reclist.
    Sending the document
      CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
        EXPORTING
          document_data              = gs_doc_chng
          put_in_outbox              = gc_x
          commit_work                = gc_x
        TABLES
          packing_list               = gt_objpack
          object_header              = gt_objhead
          contents_bin               = gt_objbin
          contents_txt               = gt_objtxt
          receivers                  = gt_reclist
        EXCEPTIONS
          too_many_receivers         = 1
          document_not_sent          = 2
          operation_no_authorization = 4
          OTHERS                     = 99.
      CASE sy-subrc.
        WHEN 0.
          WRITE: 'eMail sent successfully'(005).
        WHEN OTHERS.
          WRITE: / 'eMail could not be sent'(008).
      ENDCASE.
    ENDFORM.                    " send_log_mail

  • How do I change the account of a pending outgoing email?

    I am having problems with outgoing email in an account. I am using email on my iPad and have built up a backlog of pending outgoing emails in that account. It is very frustrating and leaves me with the feeling that the iPad cannot be relied on as much as a laptop can.

    Tap the email in the Outbox to select it. Then you click in the field that has your email address in it - the field with cc/Bcc, From: [email protected],
    Then the three fields expand to one line each, Cc, Bcc & From: seen in the second photo below.
    Then you can tap on your email address in the  - From: line - to open up the options box and choose the account that you want the email to be sent from. I assume that it will work this way from an email selected from your Outbox. I know you can do this when you type a new email so I think it should work for you as well.
    In the photo below - the black text ....When you click this field ... is the line that equates to the Cc/Bcc, From: line in the photo above. That was the original area that I tapped to open up the Cc Bcc and From fields on three separate fields.
    Message was edited by: Demo

  • Why have the font sizes in my existing emails suddenly changed from uniform to mixed?

    All of a sudden the font sizes in my existing emails have changed from the same size to different sizes -- some larger, some smaller. Also, in some cases the font has changed from normal to bold. I used to be able to solve this problem when it happened before by closing and reopening TB, but that doesn't work anymore. I haven't made any changes to the font settings. Any suggestions?

    probably related to the original ISSUE. https://support.mozilla.org/en-US/questions/1007786#answer-597502
    Closing.

  • Why is the file copied onto my external bigger?

    Hope someone has an answer for this because its kind of bugging the crap out of me. I recently took my G5 Quad in for a repair and of course backed everything up and removed all personal info from the G5(call me paranoid). I noticed something odd, I had 305.75gb of photos that I copied onto my external but it shows up as 306.96gb. Like I said Im paranoid so I wrote down the number of files in that folder and the the desktop and external both note the same number of files.
    Anyone else bugged by this or is it just me. <Edited by Moderator> ...any information would be great its just really bugging me.
    Message was edited by: JasonY01
    null

    Files take up more space on a larger drive because the drive space is divided into blocks, and if even a byte of a block is used, the block as a whole is considered used. Larger drives have larger blocks.
    (42344)

  • Why is the LaCie copy silent on DVD player?

    Friends,
    After several frustrating hours (LaCie's readme only tells me how to connect to LaCie's readme--it should say, "if you are reading this don't bother to read this.") I finally burned a DVD. It was made from a videocam film that we had copied to a DVD. The sound was very bad, but as it was a souvenir film we want the sound.
    On my computer, all works well but when played it on the television the video plays but it is silent. Did I miss something in the Burning Process?
    I was so proud, but now I'm lost again.
    Patricia

    Is the DVD player built into the TV? or is it an
    external DVD video player? or are you using your iMac
    to send the video to the TV?
    Thanks, Dwayne--you pointed me away from the iMac and LaCie and I found that the DVD player was not properly connected to the TV.
    Solved

  • Why isnt the digital copy software working with itunes 10.5

    i cant get babylon AD to load on my itunes, it says something about needing itunes 7.6 or higfher, i have 10.5, what do i do?

    fixed never mind

  • Why is the trash automatically emptied on my email account?

    My emails used to be saved in the trash and I kept all of them for future reference. Now they just disappear. Is there a setting I can change to change this?

    ''re: My emails used to be saved in the trash and I kept all of them for future reference.''
    'Trash' is for items you do not want. 'Trash' means 'Rubblish' to throw away; discard; delete.
    They are only in the Trash because you selected to 'delete' them or you moved them manually.
    The reason for having a 'Trash' folder is to act as a stop gap because sometimes you might delete an email in error and want to rescue it.
    Trash folder is not the place to store items that you want to keep.
    Please create new folders to organise your wanted emails.
    Use 'Trash' for unwanted emails.
    Trash folder (also known as 'Deleted') can be auto emptied on exit if option is selected.
    Tools > Account Settings > Server Settings for the mail account
    or
    Menu Icon > Options > Account Settings > Server Settings for the mail account
    uncheck/select as appropriate: 'Empty Trash on exit'
    click on OK.
    If you have an Imap mail account, there may be a different policy used by the server. Some auto empty Trash folder periodically by default and there is nothing you can do about it. After all, Trash is for unwanted items, so after a period of time allowing for rescuing an email deleted in error, they clear this folder to create more space.
    Background info:
    When you select to delete an email or put it in 'Trash', from your point of view it moves from eg: inbox to 'Trash'
    In reality, it is still in the Inbox as a 'marked as deled' email hidden from view. So it is still taking up space in the Inbox.
    When you compact your Inbox folder those 'marked as deleted' are removed, thus freeing up space.
    When you see a folder in the Folder Pane, this is actually an mbox file (assuming you Pop mail account or synchronise subscribed imap folders).
    When emails are downloaded they are not stored as individual .eml files, they are stored one after the other in the order they were downloaded in the same 'file'. So you do not want to put all your emails into a single or a couple of files.
    Create folders to organise mail into smaller subsets.
    Archive older mail to free up space in regular used folders.
    See info on Archiving.
    https://support.mozilla.org/en-US/kb/archived-messages

Maybe you are looking for