Why it is still jumping and flickering in CS4 source monitor ?!

I've converted AVCHD 1920x1080 50i 25mbps m2ts files (shot by sony hdrcx350ve) in sony vegas 9 pro to hdv 1440x1080 25fps bitrate 25000 upper fields first.
When opened in media player everything seems allright footage has no artifacts. The same footage imported to cs4 during playback in source monitor has some strange artifacts. Picture is jumping - flickering: long lines from left to right side of screen during motion. Prestets are set directly to footage attributes.
I've already tried many options of conversion and nothing seems to be working. I used tmpg enc, sony vegas, avc encoder.
What it is?
What I am doing wrong?
What to do?
Is this codec problem?
Please help
Sometimes the same footage converted at the same conditions and presets is looking good in media player sometimes is flickering.

Similar Messages

Why can't I open a sequence in the source monitor?

Normally when I edit, I use pluralize, which creates a sequence in which I can take notes. I usually then drag that sequence into my source monitor, create in and out point and place that into my final timeline. For some reason, Premiere is not letting me drag the file I need into the source monitor. Any idea why? Is there something with the settings off?
Please help

What's wierd is that some Sequences can be brought into my source monitor without a problem, while other's cannot.
I also noticed that the ones that can't be brought into the source monitor, if you were to import them directly onto the timeline, they are imported without audio. Those that can be brought into the source monitor import with audio and video.
Any ideas?

Why is audio & video out of sync in the source monitor?

It is my second day with Premiere Pro CS5.5. I dit something and now is the source material out of sync. I re-imported the clip but it is still out of sync. All the other videos are fine. Please help!

Not nearly enough information for anyone to try and help
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037?tstart=0
What is a CODEC... a Primer http://forums.adobe.com/thread/546811?tstart=0
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037?tstart=0
Report back with the codec details of your file, use the programs below
For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en
For Mac http://mediainfo.massanti.com/
http://blogs.adobe.com/premiereprotraining/2011/02/red-yellow-and-green-render-bars.html
Once you know exactly what it is you are editing, report back with that information... and your project setting, and if there is a red line above the video in the timeline, which indicates a mismatch between video and project
More information needed for someone to help http://forums.adobe.com/thread/416679
Some is general about your computer and OS, some is specific to video editing
Build a Configuration file http://www.piriform.com/speccy
Brand/Model Computer (or Brand/Model Motherboard if self-built)
How much system memory you have installed, such as 2Gig or ???
Operating System version, such as Win7 64bit Pro... or whatevevr
-including your security settings, such as are YOU the Administrator
-and have you tried to RIGHT click the program Icon and then select
-the Run as Administrator option (for Windows, not sure about Mac)
Your Firewall settings and brand of anti-virus are you running
Brand/Model graphics card, sush as ATI "xxxx" or nVidia "xxxx"
-or the brand/model graphics chip if on the motherboard
-and the exact driver version for the above graphics card/chip
-and how much video memory you have on your graphics card
Brand/Model sound card, or sound "chip" name on Motherboard
-and the exact driver version for the above sound card/chip
Size(s) and configuration of your hard drive(s)... example below
-and how much FREE space is available on each drive (in Windows
-you RIGHT click the drive letter while using Windows Explorer
-and then select the Properties option to see used/free space)
Windows Indexing is BAD http://forums.adobe.com/thread/676303
While in Properties, be sure you have drive indexing set OFF
-for the drive, and for all directories, to improve performance
Some/Much of the above are available by going to the Windows
Control Panel and then the Hardware option (Win7 option name)
OR Control Panel--System--Hardware Tab--Device Manager for WinXP
And the EXACT type and size of file that is causing you problems
-for pictures, that includes the camera used and the pixel dimensions
Plus Video-Specific Information http://forums.adobe.com/thread/459220?tstart=0
Read Bill Hunt on editing a VOB/MPG file http://forums.adobe.com/thread/464549?tstart=0
Edit Vob http://premierepro.wikia.com/wiki/FAQ:How_do_I_import_VOB_files_/_edit_a_DVD%3F
Read Hunt on Using MOD/TOD files http://forums.adobe.com/thread/699990?tstart=0
Work through all of the steps (ideas) listed at http://forums.adobe.com/thread/459220?tstart=0
If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section at the troubleshooting link
Also read file troubleshooting http://kb2.adobe.com/cps/407/kb407928.html

Still images don't show in source monitor

Hi,
Running CS5.5 on a Mac Pro, all updated, latest software. Using a Black Magic Decklink card for output.
My problem is I can't see any still images when I load them into the source monitor. They don't show up when I preview them from the media browser and they don't show up when I import them and load them into the source monitor... Just a black screen.
I can edit them to the timeline and when I double click on them they load into the source monitor! But they don't load normally from the project window.
They are jpegs, but I've tried with png as well...
Thanks
Ben Kupfer

They are way too big. One is maybe ok but several.
Make the dimension at least half the size, then they probably have no trouble showing up.

Why is ipad2 still online and active when supposedly in lost mode and locked?

hey all,
i need some help regarding a situation i'm in!! the overview is i'm going through a messy breakup at the moment and my ex has possession of my ipad2 (a wi-fi model that's running ios6)!! it's supposedly for my 7 year old son's use (he's autistic)!! anyway, since it's registered to me, i had restrictions enabled with a 4 digit pass code where i had location services turned on, and i disabled my mail account and other things that would not be appropriate for my son to use or access, such as skype, facebook, etc!! basically, all that was on it was his game apps, safari, youtube and our photos of days out etc!! my ex was paranoid i was spying on her through the location service....... i explained that it was a security feature that would enable it to track it if it was lost or stolen!! she even thought i was listening to her conversations and watching her through the camera!! i explained this was absurd and paranoid!! anyway........
well, here's the problem!! after having the restrictions enabled for months, oddly enough after receiving a summons last week requesting her to attend court next week concerning the matter of my contact with my son, i noticed yesterday on my find my iphone app on my icloud account on my macbook the locations services was disabled and the ipad was online, being used!! realizing immediately she's obviously figured out my restrictions pass code and turned off the locations feature!! i immediately put it into lost mode (receiving an email confirming), and within minutes, it was offline for about 4 hours!! in the afternoon, i checked it again, lost mode was disabled and it was being used....... so i put it in lost mode again! 30 seconds later, it was disabled........ finally, i put it into lost mode and added a message that would be displayed on the screen stating 'be warned: i am aware you are using my passcode and password without my permission, which is a criminal breach of my privacy! ignore this & i will report to the police!'! it went offline! 7pm i received a text to my iphone asking my my son couldn't access the ipad and why was there a request to phone her! i ignored, as i know this was a game!! whilst in work, i received an email to my icloud mail inbox stating that 'lost mode had been enabled'......... making me realize she must also have access to my apple ID to gain access to icloud to enable lost mode! it stands to reason that you cannot tell the device you are actually using it is lost and lock it down!! finally, i updated the lost mode with a new message stating i was going to the police and she freaked out!!
so, that's the situation! the questions i need answered are:
*aside from a lucky guess, how else could she get my pass code and icloud pass word? is it possible the ipad has been jailbroken, hacked or spyware has been used to get my pass code and password?
*how come, when in lost mode, it says on the find my iphone feature on icloud that it's active (green spot) and 'online: location services disabled'? should lost mode not render the device unusable? i monitored it for at least an hour last minute...... it kept changing it's status from 'online: location service disabled' to simply 'offline'!
*in the 'find my iphone' app on icloud, next to the lost device, there's a symbol of an orange padlock! what does this actually mean? if it means it's locked, then how can it be online and seemingly active?
just to cap off, i've requested the device be returned to me (my ex has ignored this, stating only she intends to replace this device so she's free from my control and spyware) and i've contacted my solicitor who has offered to send an official letter requesting it's safe return!! as the device is registered in my name and contains my personal information, i understand the implications for her is that she's committed theft and possibly used criminal means to invade my privacy!!
any help or advice would be greatly appreciated!
alex

just giving this a wee bump as time is of the essence here and i need advice/ answers quick!
apologies if i've broke any rules!
alex

Why do my locators jump and re-size when i click in different MIDI regions? I want my locators to remain set to what ever i set them to, Arhhh.

I have Logic Pro loaded on my Studio iMac at home, but the locators dont stay set to what i put them at. If i press on a region, say a beat or a short slice of audio, the locator will re-size its self to the size of the region i have pressed. This is annouing if i and working on a 8 bar lopp etc. can any help me out? Its driven me mad.

It's called 'auto set locators' - I don't remember if there is a menu item for this, but there is a key command to toggle it on or off. Search 'toggle' in key commands.

I dropped my iphone 3gs in water and grabbed it immediately out. It gave me a charger is not supported with device screen every minute or two. I powered it off for the night. I havent experienced problems since. Why does it still work?

I dropped my iphone 3gs in water and grabbed it immediately out. It gave me a charger not supported sign every minute or two. I decided to turn it off for the night and the next morning it worked fine and only the bottom sensor was triggered. Why does it still work and how long will it last?

Water in itself will not kill electronic components if you let it dry out. Your first reaction to turn it off was a good one but you could have waited even longer.
It also depends what's on your water that will stay after the water itself had dried; like salt. Anything that iseither acid or conductor left on the circuit board will reduce the life of the board. Given said this, no one could state how long your iPhone will work since no one will know for sure where the water had time to infiltrate before you removed your device and no one what's may left there.
Consider yourself lucky. I don't understand however what you mean by a sensor triggered.

Nano 6th generation - flashing and flickering white screen loop

I have an issue that does not seem to be exactly answered anywhere.
1. The screen was bad and was not responsive when unplugged from the computer. Black screen, no nothing.
2. When connected to the computer it would show up in iTunes, however the screen would go to a white screen for 3 seconds then go out, then you would get about a minute of very faint flickers then back to a white screen for 3 seconds. This would continue indefinately (Let it go for 2 hours).
3. Even though it was like this I was able to upgrade the iOS and register it and so on.
4. Figuring it was the screen I purchased a new one and replaced it. While replacing it I was able to see the screen and flip through it and so on. At this point it was working although the battery had almost zero power.
5. Finished reassembly, plugged it in the computer. It is now not recognized by itunes and is in the infinate loop of flashes and flickers.
6. When not connected to the computer there is nothing just black.
7 It also does the flashing and flickering when plugged into the wall.
8. I did go back and carefully disconnected all connectors and reconnected them all as I saw this as a solution in a post. Still flashes and flickers when plugged in.
9 None of the reset procedures do anything.
Ok all you experts what is the issue? It is very frustrating especially since it was working.

same problem as mine, don't know what to do either, when you find out please post.
thanks!

Why won't apple acknowledge and fix the IOS 5 update encryption bug?

When updating to IOS5 and saving a backup, if you intentionally do not encrypt the backup, the software will do it for you against your will without letting you know. The source for the assigned against your will and knowledge password for that backup isn't clear and many people never figure out what it is. Clearly a lot of people on line and multiple people I know have come across this bug in updating their IOS to version 5 and many have lost everything on their IPADs and IPhones. Losing one's backup of irreplaceable pictures and files etc.... is just a major loss and I spent hours on the phone with a service agent who verified it is a frequent problem but that there is no acknowledgement of it.
Why is this still happening and why isn't the bug fixed considering that it is so devastating for users who can't figure out the assigned password. It happened to me months ago, it happened to my brother 2 weeks ago and to the wife of an office mate of mine yesterday. Trying every password ever known to you doesn't always work.
I'm seriously for the first time in my entire 20 years of exclusively owning Apple computer products thinking about switching to an Android instead. Apple has failed me here and without effort to curb the problem with a fix, (this has been posted previously on this support community website by others for months now) it seems endemic of front door salesmanship without concern for the customer coming back for help with the product. I give Apple it's first F.
How can I restore from an encrypted backup I didn't encrypt?

Here are an example of just a few threads pulled in 20seconds with multiple users in ech thread chiming in about their similar problem.
https://discussions.apple.com/thread/3373852?start=30&tstart=0
http://www.justanswer.com/mac-computers/5ov7e-ios5-upgrade-restore-fails-asking- encryption-password.html
http://www.ipadforums.net/ipad-os/49211-ios5-itunes-asking-backup-password.html

Link sound and video in source monitor

Hi,
I'm using CS3. I have a mpeg video clip and a wav sound file on the timeline. The video / audio is not multiplexed. They are linked on the timeline. What I'd like to do is link the video and audio and go into the source monitor with the material.. so I can edit subclips etc from source monitor and put into a new video layer on timeline.
When I put both video and soundfile into source panel , edit video, and drag onto timeline only the video goes to timeline.
Is there a way to link them in the source monitor so both video and sound can be edited to timeiline?
Thanks
Rod

Rod,
I feel your pain. Many years ago, my cousin came to me to design a Web site for her trout ranch. Fine, no problem. I sent her the normal assignment list of questions: audience, their specific demographic, intent of Web site, history, services, etc., etc. Never got a thing back, but tons of e-mails on her ideas on how the site should look and the sites that it should link to. "OK, those are useful bits of info, but lets get back to the questions. I need those first." More sites to link to, and a couple of shreds of paper with ideas. "What's that on the bar napkins?" "Oh, that's the history of the ranch." I traveled to her ranch and shot for several days, and sent the select images on DVD for her to do a final edit. She sent those to Orvis, to use in a calender, without even credits! Luckily, I had not sent the chromes. She contacted me and asked if I had more stock shots, as Orvis wanted to save money on having someone shoot for them... Uh, not quite.
Finally got some useful ideas, and did a complete layout of the site. I kept pressing for the "Who We Are" material, and got more napkins and backs of envelopes with some real Joycean writings. I took all of that info to a copywriter friend, who owed me for some photoshoots. He worked for a few weeks, e-mailing me lists of questions. I FWD'ed those to cousin, and never got a reply. When he was done, I sent the copy to her - not even close. I asked her to write it all down in a TXT, or DOC file and send it to me. A few weeks later, I got legal sheet of lined paper with words that would have made Kafka ponder.
Still, I plugged along, and sent the complete layout. "Where's the canoe rental?" "No one ever mentioned canoe rentals." "Where's the horse boarding?" "What horse boarding? When did that get added?" On it went. I finally managed to do a mock-up of the site, which was now about 60 pages, and linked to over 300 sites around the globe. Well, now there was an espresso stand on the highway, a dog boarding concession and a half-dozen other additions. Plus, the interiors of all of the rooms had been redone, since I shot them. I built the changes in Photoshop, and "redecorated" each room, per the descriptions of those decorations.
Even then, the Who We Are was not right, and incomplete. After four months of work, I issued an ultimatum - I am done, until you get me the info requested in that first form, with a BTW - here's another copy. [Sounds a bit like Harm's 5th request for necessary info.]
A month elapsed, and then I got an e-mail. A friend of a friend had designed a wonderful site for her in trade-out. I went to the URL. It was a two pager with zero links to anything. It did have a Who We Are, but it read like Lawrence Ferlinghetti.
Next e-mail was "would you be my Webmaster and update my site weekly?" My answer was that because I was so busy, I was not the right person for that job. I taught her Acrobat, and did add a few PDF pages for her, but that was it.
In the end, it was hard labor and little fun. The site was passable, but nothing like she stated was necessary. I do not know if she ever updated any of the PDF's, but highly doubt it. I never even got a thank you note from Orvis either. Loads of fun. Remember my comment in another thread on the "Three Reasons for Taking an Assignment?" Could have been fun, but it was not.
I wish you luck, as I have "been there - done that," and it ain't no fun.
Hunt

Why do my anchor points and triggers jump to anchors they are not assigned to?

Hello again,
I am still tinkering away on my school project Adobe Muse page, but there are just some glitches I can't get under control. The biggest issue is by far the problem with the anchors. I followed a tutorial to the T creating them, but the triggers to not jump reliable to the area they are suppost to go to.
I have a long horizontal image scroll on which I placed "bubbles" (my links) to visit the sub-pages. Then the user is supposed to be able to return to the same place in the image that he has left from, but this is where things go wrong. The further down the image (probably also depending on how many sub-pages you have visited) the jumps seem to go more erratic.
Since explaing this is really tricky without an example I already uploaded a copy of my entire Muse page including assets to a dropbox folder. If somebody would be willing to take a look and tell my what it is that I am doing wrong.
In addition, I have some fixed objects in some of the sub-pages but they jump from where I plced them on the page to about 40+ pix to the right in the preview/published view. Why??
Still incredible confused...
file on drop box: https://www.dropbox.com/sh/wxrneqhk0fj4moj/hf3P0vRrpS
link to test page: http://blau-horizontal.businesscatalyst.com/index.html

Judy,
Give this a try:
*+Your signatures are stored as webarchive files in your <home>/Library/Mail/Signatures folder. There should be a webarchive file for each signature and they in turn are referenced in a SignaturesByAccount.plist file within the same folder. It is possible that the plist file has become corrupted and/or the signature files are corrupted. Move the SignaturesByAccount.plist file to the desktop and then re-create your signatures to see if that resolves the problem.+*
I found that on another post (Thanks 2point5!)
After you move the SignaturesByAccount.plist to the desktop and recreate the signatures, make sure you then go ahead and trash it. A new one will be made in the Signatures folder.
So far this has worked for me.
Good Luck
John

I upgraded for Firefox 4 and now my simplePass identity protection (biometric scanner) on my laptop will not work. WHY? It still works with IE but I don't use IE.

I upgraded for Firefox 4 and now my HP SimplePass Identity Protection (biometric scanner) on my laptop will not work. WHY? It still works with IE but I don't use IE. It worked with the previous Firefox version but now when I use the internet, it doesn't even acknowledge I have the scanner. When I run my finger over it, it opens the settings panel but does not allow use of the already saved information or allow new information to be entered. I need this corrected. Any suggestions?

I asked this same question, and just received a response:
"Thank you for contacting DigitalPersona. There will be no update releases
for DigitalPersona Personal in the future. There will be no updates for
Firefox 4 nor Internet Explorer 9. IF they work they work, if they do
not work with DPPersonal, then you will have to decide to either keep
DPPersonal and forgo Firefox 4 or IE 9, or vice versa. DigitalPersona
is leaving the consumer market and is focusing on business applications.
In fact, DigitalPersona Personal will not longer be supported after
Mid-April of this year.
We apologize for any inconvenience this might cause. Sincerely, Tech Team "
In other words, there will be NO update.

My free apps purchased using my cousin's apple id won't open anymore on my iphone but apps donwloaded using my own apple id still works. Why is it like that and how can I make apps purchased using my cousin's apple id work on my iphone? Help!

My free apps purchased using my cousin's apple id won't open anymore on my iphone but apps donwloaded using my own apple id still works. Why is it like that and how can I make apps purchased using my cousin's apple id work on my iphone? Help!

Welcome to the Apple Community.
Delete the apps purchased by your cousin and purchase your own.

HT204379 I have pointed to my pictures folder and all the pictures are 1mb in size with a lowest resolution 4416 × 3312. Why do I still get blury images in my shifting titles screen saver?

Hello,
I have just moved to mac and pointed my screen saver to my pictures folder and all the pictures are 1mb in size with a lowest resolution 4416 × 3312. Why do I still get blury images in my shifting titles screen saver?
Regards,
Jan

finally found it
http://lifehacker.com/5711409/how-to-search-for-hidden-packaged-and-system-files -in-os-x
need app find any file
link at bottam

As of version 31, why is there still no Thunderbird option to insert current date and time in message that you are writing?

As of version 31, why is there still no Thunderbird option to QUICKLY insert current date and time in message that you are writing?
Literally have seen this very-much-needed -- and used -- option "promised" for three years now, and even if there's only one or two formats that could be used, at least the option is there.
It seems only way is to link a Macro and tool to Thunderbird and do it that way.
Joe Rotello
[email protected]
Skype: joerotello

Where was it promised? A quick search of Bugzilla didn't find a functionality request bug report for it.
I assume you're aware that Mozilla stopped development about 2 years ago (just adds security/stability fixes and provides infrastructure) and all new features and bug fixes are now added by the community. They seem pretty tied up with bug fixes and reworking some hard to maintain components such as the MIME support.
Have you tried the Timestamp add-on at https://addons.mozilla.org/en-us/thunderbird/addon/timestamp/ ? The version at AMO doesn't support versions later than 2.0 so you'd need to do something like install the disable add-on compatibility checks add-on at https://addons.mozilla.org/en-us/thunderbird/addon/checkcompatibility/?src=ss, and ignore the warning message about Timestamp not being compatible. However, the author has a version at http://extensions.sanjer.nl/?page=tb_ts that supposedly supports up to Thunderbird 11.9.x so it should be "compatible by default as it supports version 5 or later and is not a binary add-on like Lightning or Enigmail.
"For Thunderbird use the context menu (right click popup) in the compose window, Ctrl+Shift+T or "Options | Insert timestamp" to inserts the date/time into a message"

Why it is still jumping and flickering in CS4 source monitor ?!

Similar Messages

Maybe you are looking for