Why JMF can not detect web cam in my net beans IDE?

Hi All,
I am newbie to JMF.
Install JMF in my window 7 system.
JMF can not detact webcam in netbeans IDE 6.8.
But JMStudio is detact available my camera.
CaptureDeviceManager.getDeviceList(null) is return null value.
how to over come this issue...

You probably didn't add JMF.jar to your project library folder.

Similar Messages

My computer can not detect a camera on my iphone 4S

When I connect my phone to my computer, it says it can not detect a camera and I can't download my pictures/videos. How can I fix this?

gdgmacguy asked for the OS your computer is running, why exactly did you think anyone wanted to know the version of iTunes on the computer?
Seems like there may be a user issue here. Try replacing the user, see if that resolves the problem.

Why I can not use IPod camera-connector with IPod touch ?

please help !

Because Apple didn't make the hardware compatible. No one here is going to have any other answers. I would point out that there are apparently differences in the docking port, either hardware or software. Older third party docks, as an example, don't work properly or at all with the newer iPods. I suspect it's related to authentication/DRM issues for movie rentals. This could be related but we'll probably never know.
+But why????????+
Because Steve said so!

TS3798 I get this error message"your operation could not be completed" I need help figuring out why I can not access the web page.

I get this error message"your operation could not be completed" I need help figuring out why I can not access the web page.

amarilysfl wrote:
"Your disk could not be partitioned. An error occurred while partitioning the disk".
https://www.apple.com/support/bootcamp/
If you were using Apple's BootCamp and received this message, quit it and open Disk Uility in your Applicaitons/Utilities folder.
Select the Macintosh HD partition on the left and select Erase and Erase Free Space > Zero option and let it complete (important) this will check the spare space for bad sectors that can cause issues formatting partitions.
Once it's completed, try creating a partiton again in BootCamp.
If that doesn't work, then hold command option r keys down while connected to a fast internet connection, Internet Recovery should load (spinning globe) and then in that Disk Utility, select your entire internal drive and click > First Aid > Repair Disk and Permissions.
reboot and attempt Bootcamp again.
If you still get a error, it might be that you have OS X data on the bottom area where BootCamp partition needs to go. This would occur if you had the drive or computer for a long time or wrote a large amount of files to the drive and nearly filling it up and then reduced some, but it left traces in the area BootCamp needs to go.
To fix this
BootCamp: "This disc can not be partitioned/impossible to move files."
How to safely defrag a Mac's hard drive

DVD-Audio and "can not detect sound blaster card" with Audigy2 Va

I recently purchased an "Audigy2 Value" card from an eBay user, because I recently purchased some DVD-Audio discs. I downloaded the Audigy2 drivers from the website, and the Creative MediaSource player. 5. Surround sound worked fine for me, though sometimes the driver would reset to the default 2/2. sound and I would have to re-select 5. sound, which was annoying.
Then I was completely unable to get the MediaSource player to recognise my DVD-Audio discs, and the EAX functionality of the player would never work. The EAX logo never appeared in the player. When I tried installing the MediaSource player from an install disc, I got the message "can not detect sound blaster card". Then I discovered the world of EEPROM problems.
I followed advice from some other threads, including using ScanPCI to get information on the card, which yielded the following result.
When installed on my machine (Asus A7A266 motherboard) the ScanPCI reads:
Vendor 02h Creative Labs
Device 0008h Unknown
Command 0005h (I/O Access, BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
Revision 00h, Header Type 00h, Bus Latency 20h
Self test 00h (Self test not supported)
PCI Class Multimedia, type Audio
Subsystem ID 0002h Unknown
Subsystem Vendor 02h Creative Labs
Address 0 is an I/O Port : 0000A800h
System IRQ 5, INT# A
New Capabilities List Information :
Power Management Capabilities
Supports power state D2
Supports power state D
Current Power State : D0 (Device fully-operational, no power saving)
On another machine (specs unknown, it's a "house pc") I got this (with 3 entries!):
Vendor 02h Creative Labs
Device 0002h EMU0K Audio Chipset (SB Li've!)
Command 0004h (BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
Revision 04h, Header Type 80h, Bus Latency 20h
Self test 00h (Self test not supported)
PCI Class Multimedia, type Audio
Subsystem ID 002002h CT4850 SBLi've! Value
Subsystem Vendor 02h Creative Labs
Address 0 is an I/O Port : 00009000h
New Capabilities List Information :
Power Management Capabilities
Current Power State : D0 (Device fully-operational, no power saving)
Vendor 02h Creative Labs
Device 7002h PCI Gameport Joystick
Command 0004h (BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
Revision 0h, Header Type 80h, Bus Latency 20h
Self test 00h (Self test not supported)
PCI Class Input, type Other
Subsystem ID 002002h PCI Gameport Joystick
Subsystem Vendor 02h Creative Labs
Address 0 is an I/O Port : 00008800h
New Capabilities List Information :
Power Management Capabilities
Current Power State : D0 (Device fully-operational, no power saving)
Vendor 02h Creative Labs
Device 0008h Unknown
Command 0004h (BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
Revision 00h, Header Type 00h, Bus Latency 20h
Self test 00h (Self test not supported)
PCI Class Multimedia, type Audio
Subsystem ID 0002h PCI Gameport Joystick (Guess Only!)
Subsystem Vendor 02h Creative Labs
Address 0 is an I/O Port : 00008400h
New Capabilities List Information :
Power Management Capabilities
Supports power state D2
Supports power state D
Current Power State : D0 (Device fully-operational, no power saving)
(Just a note: above you can clearly see that it does not say I have an Audigy, it thinks it is a SBLi've. Is this normal? The card IS an Audigy 2, it says so on the card.)
So, I put the card back on my own PC, thinking this has fixed my EEPROM, but I get the same as before. Subsystem ID 0002h. And of course the install software will not detect the card.
I realise that I could go back to using the web drivers, but this still leaves me with MediaSource not recognising the card and not enabling DVD-Audio or EAX, which is why I bought the card in the first place!
I have heard that the VIA chipset is possibly to blame for the EEPROM problems on the Audigy cards, and certainly it seems like it is not permanent, since it gave different information on the other PC. So now I am seriously considering getting a new motherboard.
Do other motherboards cause this same problem? I don't want to buy another board and get the same trouble. All I want is to be able to install my MediaSource and have it recognise my card so I can listen to my DVD-Audio discs.
Cheers,
Russ.

Figured out my problem. Installing the drivers from the web to begin with was a bad idea. They just did not work properly with the card.
The "card not found" problem has gone as well, after installing it in another PC. I am also using the proper install disc now, as the other one I was using turned out to not be for the Audigy 2 value after all, but was an Audigy 2 install disc. That easily explains the "Card not found" error. The differing results from the ScanPCI program are still bizarre, though.
Thanks to all of the people on the forum who posted information in other threads to help me deal with this issue. For now I am sticking with the original drivers from the disc and I am not upgrading.

WRT54GS Can not detect the router

We lost the internet connection a few days ago for a couple of hours and since then had to reset the modem and when I try to set up the router with the Easy Link Advisor I get can not detect the router. I am using the router to access the internet and it can't be detected???
I have powered it off enough times and then some and need to get this running to use the laptops.
I am running ver 7 firmware that it came with but I don't know what the exact version I am running or gor that matter where to find it.
Thanks

okay went through the firmware upgrade and installed it through 192.168.1.1 to admin tab and upgrade. it got to the reboot part and hung there for a bit, i hit continue or what ever it said and came back upwith a dns error and page unreachable. version installed is what i downloaded 7.50.5. i am still having the same problem, all the lights are lit that are suppossed to be lit, and i am on the internet and running through the router, and when i go into easylink advisor and start the setup process i have to go through the entire thing including selecting the router (which it should know what router it is) though removing the power cord and waiting and still told that it can not detect the router. i have no idea where to go from here. thanks!

Why I can not open my program Photoshop 12 and premiere element 12 in my computer

I purchased my Photoshop element 12 and Adobe premiere 12 a couples days ago
I came back home so happy to install my program in my computer but Till now I don't know why I can not be able to open the program yet

Hi,
We have pushed a new release today. See if you are able to access your script now. If you are still having problems accessing your script, please tell us a convinient time so we can set up a remote session with you.
Regards,
Sunny

Why i can not open Video Capture Device Settings in Adobe Flash Media Live Encoder?

Hi! I've got a problem with Adobe Flash Media Live Encoder 3.2. Why i can not open Video Capture Device Settings? I'm clicking this button, but it doesn't appear, there is just a blinking of the camera's window. Please help me, i'm looking like a shining red pig! Need to change the light or contrast.

"The audio preview in FMLE indicates there IS audio being input"
How do you know this?
are you "Saving to file"? how is the audio in the saved file?
Adninjastrator

Can not detect wireless card

WRE54G / Win XP SR2
My laptop and PDA can connect to the network wirelessly with no problems.
Trying to connect my WRE54G to my network. On every attempt at AutoConfigure nothing happens. Have disabled router security and 'SPI Firewall' (whatever that is). Still nothing. Have disabled router security and 'SPI Firewall' (whatever that is), and McAfee Firewall. Still nothing. I have moved the WRE54G to within ~4 feet of the router and tried everything again. Still nothing.
I have tried Setup but when I hit 'Next' I get the popup "Can not detect wireless card."
Have tried a reset and have unplugged/replugged the WRE54G. FWIW, the WRE54G 'Link' light blinks blue once for about a second and turns a constant red. The 'Activity' light blinks blue twice quickly about every 5 seconds. Nothing on my PC shows any response.
What is the wireless card that can't be found? The WRE54G?
How do I resolve this?
33#44

this worked for me too. Although I was never able to use the cisco install wizard successfully. I am using WEP security on my access point. I took the following steps.
1. From laptop, connect to network wirelessly with WEP security settings in place
2. From laptop, open browser, go to: 192.168.1.1, select wireless security, disable wireless security
3. From Range Extender, hold auto-configure button. It took me multiple attempts (~5) and it connected so the 'Link' light changed from red to a consistent blue.
4. From laptop, disable security for the access point (via control panel, wireless network connection settings)
5. From laptop, connect to wireless access point (via control panel, wireless network connection settings). test internet connection. Internet should work.
6. From laptop, access range extender web utility. open browser, got to 192.168.1.240, enable security, input desired WEP security settings/passphrase.
7. From laptop, enable wireless security for the access point. from browser, go to 192.168.1.1, select wireless security and enable it. use the same settings from step 6 (from the range extender).
8. From laptop, update wireless adapter settings to connect using the same security settings (eg. passphrase) from step 6/7.
range extender, access point and wireless adapter/laptop should all be connected.

Hi i can not use my camera when im using the skype for vieo call but when i used my camera through photo boot the cam is working. please i hope you can help me

hi kindly pls help me. Why is it I can not used my cam in Skype Video Calling but when i used my photo boot it is working.?

If you have a backup of OS X 10.8.4 Mountain Lion, revert back until
a fix is offered by Apple or Skype.

Why I can not open facebook on my desktop

'''why I can not open facebook on my desktop'''

Trangipani & Rod21
502 Bad Gateway
nginx/1.0.6
When try to access Facebook via Hotspot Shield. Safari said below. check and uncheck any web proxies, the same results.
502 Bad Gateway
nginx/1.0.6

Why I Can not Open a safari preferences,

Why I Can not Open a safari preferences,
I not even able to write a web address. My home page is aol I have to search to be able to open a web page
everything starts after I Update my computer to OX X Yosemite
Can Someone help me

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Then take the action that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Why I can not open curtain websites?

why I can not open curtain websites? Anyone else have this problem?

Probably sites about PCs - you know, the ones that cover Windows.
Seriously, what Web sites can't you open?

Can not open Web from Nokia N81

Hi
My Nokia N81 worked fine until today
I just connected it to PC Suite and made a synchronization - now I have folowing problem - I can not open web-browser any more.
When I go into menu and then try to open Icon web - screens becames blue (desctopimage) for a second and then I'm landing again in menu just as it was before click on icon
What can be the reason of this problem?
Similar happened also with N-Gage Icon. I've tried it with memory card and without it - the result is the same - I can not go into web-section of my Nokia

Hi,
It seems that some faults has occurred during
the synchronization. You should re-set your
internet settings. If the issue persists your
phone will need reformat.
Regards.
Fattan

Why I can not find field:Level in Project Hierarchy in BAPI_BUS2054_NEW?

Dear experts,
Why I can not find the field of "Level in Project Hierarchy" in structure BAPI_BUS2054_NEW?
I only define the data to upload wbs:
PROJECT DEFINITION
PROJECT DESCRIPTION
PROJECT PROFILE
WBS Element
WBS description
Can you tell me which fields must to upload?
Looking forward to your reply.
Many thanks.
Merryzhang

Anyone can help me ?I need the field "Level" in BAPI_BUS2054_NEW,But I can not find it.

Why JMF can not detect web cam in my net beans IDE?

Similar Messages

Maybe you are looking for