Why resource cost in Oracle does not equal the total on the routing of Usage.

why resource cost in Oracle does not equal the total on the routing of Usage.

Hi Judy,
I could not reproduce your issue. Is your Project Server patched with the latest SP and CU?
Also can you reproduce this unexpected behavior with another project?
Can you split your screen from the resource usage view, display the resource form and click right on the grey part selecting "schedule"? Then you'll have the scheduled start and finish dates for the resource's assignments. This is to be sure that
you are not missing any parts of the assignments due to a wrong zoom in the timephased grid.
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

Similar Messages

  • KE5Z drilldown report does not equal grr3 report values

    Hello,
    We have a grr3 report where the COGS line is based on functional area and account ranges.  The total displayed on the GRR3 report for the COGS cell matches the values I would expect based on the specified account and functional area restrictions assigned to that cell.  When I drill into the KE5Z report (Profit Center: Actual Line Items), which is identified as a receiver report, the summed value of the "In Company Code Currency" field does not equal what is displayed in GRR3.  The GRR3 report is returning results in the same currency as the company code currency that the report is being executed for so that is not the problem.  During my investigation it looks like the functional area restrictions are not being accounted for when I drill into KE5Z.  Any recommendations on why the restrictions identified for the cell in the GRR3 report would not be carried through to the KE5Z results?  I have been playing with this for hours and have run out of ideas.  I can't determine why the COGS cell value is different than the actual line items sum.  Any help would be greatly appreciated.
    Thanks,
    Jordan

    Hi Jordan,
    in my experience the report-report interface can only pass through selections independently.
    To give an example: I had a report painter report with line 1 that had a selection on two characteristics (say cost element A and cost center B) then a second line with selection cost element C and cost center D selected and finally a line with the sum of the two lines above.
    Now when I jump to a connected line item report by double-clicking on the line with the sum, the parameters passed on are:
    cost centers: B, D
    cost element: A, C
    Therefore, the sum of my line items is not equal to the sum that I departed from, as I get line items with cost element A and cost center D, for example, a combination that was excluded from my original report.
    I hope I made the point clear.
    Another possibility is of course, that the receiving report has additional selection active (in the form used in the dril down report) that were not present in the original report
    Regards
    Nikolas
    Edited by: Nikolas John on Mar 24, 2011 9:21 AM

  • Work order to cost center settlement does not post to GL module (FI)

    Dear Expert,
    I find the Maintenance Work order to cost center settlement does not post to GL module (FI)?Also, the settlement cost element is primary element define in GL chart of account.
    When an maintenance order is settled with KO88 or KO8G the work order value posted cost center and  the value is display in cost center report but not post to GL module in FI.As I notice only good issue or receive to/from work order is posted in GL but not the settlement of work order.Why?
    Between, Kindly advise what are the report or T-code to view the maintenance order is done the settlement and what are the value is settle for maintenance work order?
    Kindly advice under what circumstance when maintenance work order to cost center settlement is posted to GL(FI module)?
    Please advice.
    Thank you.
    KH

    Hi Kiran,
    The error message clearly says that "Cost Center validity starts from 01.10.2014" i.e. in the future period.
    Change the cost center from period in the past date and try.
    BR, Srinivas Salpala

  • In a purchase order for 3 GR's Quantity does not equal the value

    Hi,
    I have found the difference in one purchase order, there have been 3 GRs where the Qty does not equal the Value.  How has this happened?
    Any guesses why the difference has come.
    Thanks&regards,
    Veena

    Hi Vishal,
    In po history for agt 3 Gr's  Quantity does not equal the values. I hope the difference is Movement types. But exactly where to check this movements i am not getting.
    Can you tell me this which T.code.
    Tx,

  • Multiple selection in Query Panel. Operator Does not equal generates error.

    Hi,
    I'm using Jdeveloper 11.1.1.4 and creating Oracle Fusion Web Application with ADF Business Components.
    I want to use multiple selection on LOV in ADF Query Panel with Table, but I get the following error
    when I use operator "Does not equal":
    Error: Unsupported model type.
    SelectMany does not support a model of type class java.lang.Integer.
    A simple example:
    Schema: HR
    Generate default Business Components for tables Departments and Employees.
    Model:
    Create List of Values for EmployeesView(DepartmentId)
    List Data Source: DepartmentsView1
    List Attribute: DepartmentId
    Display Attributes: DepartmentName (UI Hints)
    Create View Criteria EmployeesByDepartmentVC for EmployeesView
    Criteria Item:
    Attribute: DepartmentId
    Operator: Equals
    Operand: Literal
    Select "Support Multiple Value Selection" (UI Hints)
    ViewController:
    Create blank JSF Page: showEmployees.jspx
    Drag EmployeesByDepartmentVC from Data Controls to showEmployees.jspx
    Create Query=>ADF Query Panel with Table
    Run application.
    Press Advanced button.
    Select operator "Does not equal" and department names "Administration;Marketing"
    Press Search
    Error: Unsupported model type.
    SelectMany does not support a model of type class java.lang.Integer.
    Note: it works fine with operator "Equals"
    Best,
    Kees.

    Hi,
    I was reading:
    http://www.oracle.com/technetwork/developer-tools/jdev/jdev-11gr2-nf-404365.html#bugs_fixed_in_11.1.2.2.0
    Bugs Fixed in 11.1.2.2.0
    Bug.No. 13508184
    unsupported model type error thrown for multi select view criteria
    I have tested the use case described in this thread with JDeveloper 11.1.2.2.0 but I still get the same error.
    when I use operator "Does not equal":
    Error: Unsupported model type.
    SelectMany does not support a model of type class java.lang.Integer.
    Is there anybody who can tell me more about this bug fix?
    Thanks,
    Kees.

  • GR  Qty value does not equal the value

    Hi,
    In PO,there have been 4 GRs where the Qty does not equal the Value.  How has this happened? 
    Could you please suggest me why the difference has come.
    Thanks in advance,
    Cheers,
    Veena

    Hi,
    Yes.you are right.My suggestion does not work here.
    Mr.Adam has given the perfect solution.
    But the problem is the limitations on availability to
    define Before aggregation as the aggregation property
    for CKF,even in Version older than 7.
    So try to implement the solution given by Mr.Adam with
    reference to version7 in your query even though your
    version is less than version 7.
    With rgds,
    Anil Kumar Sharma .P

  • HT1040 why can i not seem to order more than one print at a time, which obviously becomes expensive with the shipping, it does not seem to offer me the facility to choose again?

    why can i not seem to order more than one print at a time, which of course becomes expensive with shipping, it does not seem to offer me the facility to choose again? either order or cancel!

    make an album containing the photos you wnat to print, select all photos in the album  and order
    LN

  • OWM says "The directory OH /owm/wallets/oracle" does not exist

    Hello, RHEL 6, x86-64
    Oracle 11.2.0.4 Ent Edition
    I just upgraded the database from 11.2.0.3 to 11.2.0.4.  User reports "ORA-28365: wallet is not open" while trying to access tables in a certain schema.
    I have little experience with Wallet so I find out that I can "open" the wallet using OWM.  I start OWM and follow the instructions in section 9.4.3 of http://docs.oracle.com/cd/B28359_01/network.111/b28530/asowalet.htm#i1006711, and after step 2 which is to select a directory for the wallet, it tells me, ""The directory <OH>/owm/wallets/oracle" does not exist".  Ahh!  (By the way, this was when I was pointed to the ORIGINAL oracle home (11.2.0.3) because I wanted to see if the wallet existed there.
    Now I am moderately panicked.  What do I try next?  I gotta get the wallet open!
    Thank you in advance for taking the time.
    Humbly,

    Hi,
    If you have TDE encrypted objects, one must open the wallet from the sqlplus.
    1) make sure the sqlnet.ora from your $ORACLE_HOME/network/admin has ENCRYPTION_WALLET_LOCATION parameter set, example:
    ENCRYPTION_WALLET_LOCATION =
    (SOURCE =
      (METHOD = FILE)
      (METHOD_DATA =
      (DIRECTORY = /home/oracle/wallet)
    2) connect as sysdba and run:
       alter system set encryption wallet open identified by "wallet_password";
    3) select wallet status and path from : select * from v$encryption_wallet;
    4) select again from the encrypted objects

  • Build Issue(package weblogic.jdbc.vendor.oracle does not exist) weblogic10

    Hi All,
    I am getting below build error. I am migrating weblogic 10. Which jar file contains this interface: weblogic.jdbc.vendor.oracle.OracleThinClob?
    Error:
    package weblogic.jdbc.vendor.oracle does not exist [javac] if (theClob instanceof weblogic.jdbc.vendor.oracle.OracleThinClob)
    I already got weblogic.jar file from weblogic 10.
    Thanks,
    Srinivas

    Srinivas U wrote:
    Hi All,
    I am getting below build error. I am migrating weblogic 10. Which jar file contains this interface: weblogic.jdbc.vendor.oracle.OracleThinClob?
    Error:
    package weblogic.jdbc.vendor.oracle does not exist [javac] if (theClob instanceof weblogic.jdbc.vendor.oracle.OracleThinClob)
    I already got weblogic.jar file from weblogic 10.
    Thanks,
    SrinivasIt's in the datasource module/jar: modules/com.bea.core.datasource_1.0.0.0.jar

  • Argument error; the number of columns does not equal the number of parameters.

    I am using the Database Toolkit (Enterprise Connectivity) to check for a network connection and then send information from a local database to a SQL database on the network if needed.  In development of the code I continue to receive Error 1 and the Possible Reason(s) is "Argument error; the number of columns does not equal the number of parameters."  I am using the DBToolsSelectData.VI to retrieve data from the local MDB file and the DBToolsInsertData.VI to write it to the SQL file.  The collection of the data from the MDB file is successful and the connection and validation of the table and columns in the SQL file is also successful.  The error occurs when the Insert VI tries to build the query.  The number of columns being written (attempted) does match the number of columns in the data, they are both 16 string arrays.

    Ok, it's taken a bit, and I have a solution! It took a while to figure out what the DCT is doing, but it seems to be working now.
    The reason for the original error is that you were passing into the insert subVI an array of variants - which the input to the VI coerced into a single variant. You were getting the error because as far as the insert VI was concerned you were only passing it a single data value. The way to get around that was to create a cluster with one element for each column value, convert the cluster to a variant and pass the result to the insert VI - see attachment.
    In terms of the other modifications, I made a copy of the endurance.mdb file, emptied it and used it as the destination for the copy.
    Mike...
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps
    Attachments:
    NetworkCheck.vi ‏49 KB

  • Showing Booking amount when it does not equal Opportuity Revenue Total

    I there a way to create a report to easily show where the booking amount of an opportunity does not equal the sum of the products in the product revenue section? I tried Sum(Product revenue), can't quite remeber the field name, but that did not work
    Also, we would like to see any opportunity that has no predict revenue associated with it, either in the same report or a different report.
    Thanks

    David,
    The Opportunity-Product subject areas contain both Opportunity Revenue fields and Opportunit-Product Revenue fields. The Opportunity-Product Revenue field located in Columns/Opportunity-Product/Revenue/Revenue will aggregate the total amount of all products for the opportunity. There is no need to SUM this field.
    Build a report and filter it based on a field that calculates the difference between the two revenue columns and you should get your desired list of opportunities.
    Now that you know where the right fields are, you other report should be a simple filter on the appropriate revenue field = 0
    Mike

  • Oracle does not start

    Hi,
    I have installed oracle 11g r1 on centos. When the pc is connected to network, then I have no problem to spart oracle, else the oracle does not starts.
    What can I do to start oracle with or without internet connection.
    On windows I used a loopback adapter. Is here any method?
    Thank you

    Hello,
    ORA-12157: TNS:internal network communication errorThis Note of My Oracle Support may give you some solution:
    Local Connections Are Not Working ORA-12157 "TNS:internal network communication error" [ID 399342.1]Is the Loopback Interface well configured ?
    http://www.informit.com/articles/article.aspx?p=25845
    From the below documentation:
    http://download.oracle.com/docs/cd/B28359_01/install.111/b32002/pre_install.htm#BABFHCJG
    "+When you run the ping command on the computer itself, the ping command should return the IP address of the computer.+"
    Hope this help.
    Best regards,
    Jean-Valentin

  • Firefox does not stop loading even after the site is loaded and continues as if it is still loading. I have clocked it to 15 minutes, why?

    Firefox does not stop loading even after the site is loaded and continues as if it is still loading. I have clocked it to 15 minutes, why? edit
    Details

    Sorry, I should distinguish between slow loading and manual reloading.
    I understood your problem to be that Firefox never finished loading the page, i.e., some part of the page was loading too slowly.
    By reloading, I meant Ctrl+r (or the reload button), to manually reload the page. You can disregard any cached files and reload all content fresh from the server by adding the Shift key, i.e., Ctrl+Shift+r (helpful when specific sites do not load correctly).
    If the page is automatically reloading itself over and over, that sounds like a completely different problem.

  • HT3625 I have a 2012 macBook Pro 13" and the option "Use audio port for" does not appear at all in the sound menu. why is this? im running  mountain Lion 10.8.2

    I have a 2012 macBook Pro 13" and the option "Use audio port for" does not appear at all in the sound menu. why is this? im running  mountain Lion 10.8.2

    Because line-in has been removed.
    It does allow for an Apple headset with mic., but I don't know if it would work with third-party ones.
    You'll need to use a Griffin iMic or similar to use line-in via a USB port.
    The same goes for the 15" retina, the newest MBA and the new iMac (whenever it finally arrives).

  • Why to I FREQUENTLY have to reload my page to get hot links to work? Andmy keyboard frquently does not register key strokes, particularly the space bar.

    Why to I FREQUENTLY have to reload my page to get hot links to work? Andmy keyboard frquently does not register key strokes, particularly the space bar.

    # Right-click an empty area of the tab bar and choose Customize.
    # Click the Restore Defaults button, then the Exit Customize button.
    # If you don't already have it, install [https://addons.mozilla.org/firefox/addon/classicthemerestorer/ Classic Theme Restorer] and restart Firefox when prompted.
    # Open the Add-ons Manager (Ctrl+Shift+A; Mac: Command+Shift+A), then the Extensions category.
    # Next to Classic Theme Restorer, click the Options button.
    # On the Main tab, make sure "Movable back-forward button" and "Hide urlbars stop & reload buttons" are checked. You might also want to check "Combine stop & reload buttons". Close the options window when done.
    # Right-click an empty area of the tab bar and choose Customize.
    # Drag the Back/Forward, Stop and Reload buttons onto the navigation toolbar.
    # Click the Exit Customize button in the lower right corner when done.
    That being said, I should point out that you can reload pages in other ways.
    * Right-click any tab and choose Reload.
    * Right-click an empty area of the page and choose Reload.
    * Press F5.
    * Press Ctrl+R (Mac: Command+R).

Maybe you are looking for