Why should u not leave the case on the ipod while it is charging?
Why should u not leave the case on the ipod while it is charging?
Because charging the iPod battery generates heat which may become excessive if the iPod is left in a case. If you don't allow the heat to escape, then you risk damage to the iPod.
Similar Messages
-
Why can I not access the internet while i am connect to my WIFI
I am connected to my wifi but it my touch says it cannot access the internet. What can I do. I tried renewing the lease and resetting but nothing works.
Kristy,
Is your iPod configured to sync audiobooks? To check, plug your iPod in and when it appears in iTunes locate it's audibooks tab and make sure it is set to them.
B-rock -
HT5958 Why not leave the choice to let the media files in their place in the update ?
Why not leave the choice to let the media files in their place (in the Final Cut Events folder for exemple) in the update?
All my media files are missing for other software (like Motion) and we loose the control of our raw footage.
This would have the dual space on our hard drives to protect our original files separately.Ok i find a part of the solution. I can Open the Package on the library in the Finder. I have everything inside. So it's good for me to keep the hand on all my medias. But others software can't open it, it's hidden (for Motion or DaVinci Resolve for exemple). I must search all neccesary files on Finder, duplicate on a normal folder to use it.
Thanks for the response. -
Why does is not show the radio buttons
I want to display the buttons in a row then radio button in a row under the button and then log scroll pane under the radio buttons. This is my code:
//Add the buttons and the log to this panel.
add(buttonPanel, BorderLayout.PAGE_START);
add(radioPanel, BorderLayout.CENTER);
add(logScrollPane, BorderLayout.CENTER);When i run it it display the buttons and the logsrollpane. Why does it not display the radio buttons?Thanks guys.
This is my problem. We have a big system that produce lots of log files and the software testers have to manually have to go through the logs file and look for a certain XML tags in the log file.
What I want to do is help the software testers my developing a small tool that will allow them to open a log file and then click on a radio button corresponding to a xml tags that they are looking for and automatically highlight the tags in the file in yellow color .
I am not sure how feasible this is and I am stuck.
This is what I have done so far.
Can you please guys help me go forward.
import java.io.*;
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.filechooser.*;
public class FileChooserDemo extends JPanel
implements ActionListener {
static private final String newline = "\n";
JButton openButton;
JButton clearButton;
JTextArea log;
JFileChooser fc;
// Radio Buttons
static String em01 = "EM01";
static String em07 = "EM07";
/*static String dogString = "Dog";
static String rabbitString = "Rabbit";
static String pigString = "Pig";*/
public FileChooserDemo() {
super(new BorderLayout());
//Create the radio buttons.
JRadioButton em01Button = new JRadioButton(em01);
em01Button.setMnemonic(KeyEvent.VK_B);
em01Button.setActionCommand(em01);
em01Button.setSelected(true);
JRadioButton em07Button = new JRadioButton(em07);
em07Button.setMnemonic(KeyEvent.VK_C);
em07Button.setActionCommand(em07);
//Group the radio buttons.
ButtonGroup group = new ButtonGroup();
group.add(em01Button);
group.add(em07Button);
//Register a listener for the radio buttons.
em01Button.addActionListener(this);
em07Button.addActionListener(this);
//Put the radio buttons in a column in a panel.
JPanel radioPanel = new JPanel(new GridLayout(0, 1));
radioPanel.add(em01Button);
radioPanel.add(em07Button);
//Create the log first, because the action listeners
//need to refer to it.
log = new JTextArea(40,60);
log.setMargin(new Insets(5,5,5,5));
log.setEditable(false);
JScrollPane logScrollPane = new JScrollPane(log);
//Create a file chooser
fc = new JFileChooser();
//Uncomment one of the following lines to try a different
//file selection mode. The first allows just directories
//to be selected (and, at least in the Java look and feel,
//shown). The second allows both files and directories
//to be selected. If you leave these lines commented out,
//then the default mode (FILES_ONLY) will be used.
//fc.setFileSelectionMode(JFileChooser.DIRECTORIES_ONLY);
//fc.setFileSelectionMode(JFileChooser.FILES_AND_DIRECTORIES);
//Create the open button. We use the image from the JLF
//Graphics Repository (but we extracted it from the jar).
openButton = new JButton("Open File");
openButton.addActionListener(this);
//Create the save button. We use the image from the JLF
//Graphics Repository (but we extracted it from the jar).
clearButton = new JButton("Clear Text Area");
clearButton.addActionListener(this);
//For layout purposes, put the buttons in a separate panel
JPanel buttonPanel = new JPanel(); //use FlowLayout
buttonPanel.add(openButton);
buttonPanel.add(clearButton);
//Add the buttons and the log to this panel.
add(buttonPanel, BorderLayout.PAGE_START);
add(radioPanel, BorderLayout.LINE_START);
add(logScrollPane, BorderLayout.CENTER);
public void actionPerformed(ActionEvent e) {
//Handle open button action.
if (e.getSource() == openButton) {
int returnVal = fc.showOpenDialog(FileChooserDemo.this);
if (returnVal == JFileChooser.APPROVE_OPTION) {
log.setText("");
File file = fc.getSelectedFile();
try{
BufferedReader in = new BufferedReader(new FileReader(file));
String data;
while ((data = in.readLine()) != null) {
log.append(data + newline);
}catch(IOException ioe){
log.setCaretPosition(log.getDocument().getLength());
//Handle save button action.
}else if (e.getSource() == clearButton) {
log.setText("");
* Create the GUI and show it. For thread safety,
* this method should be invoked from the
* event-dispatching thread.
private static void createAndShowGUI() {
//Create and set up the window.
JFrame frame = new JFrame("PROGRESS Message Viewer");
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
//Create and set up the content pane.
JComponent newContentPane = new FileChooserDemo();
newContentPane.setOpaque(true); //content panes must be opaque
frame.setContentPane(newContentPane);
//Display the window.
frame.pack();
frame.setVisible(true);
public static void main(String[] args) {
//Schedule a job for the event-dispatching thread:
//creating and showing this application's GUI.
javax.swing.SwingUtilities.invokeLater(new Runnable() {
public void run() {
createAndShowGUI();
} -
Why can I not access the Mac App store?
why can I not access the Mac App store? I cannot enter the Mac App Store; for updates to featured Apps?
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting. -
I would like my music to appear organized in the same way on my iPad as I have done it on my Mac Book. (and on my iPhone as well) Since it is in the cloud, why does it not appear the same way in all devices?
The purpose of iTunes match is to make your music library available to all of your devices anywhere. It will sync Playlists, but no other type of organization you may have made.
If you're having trouble, be sure you are logged into the same Apple ID on all devices but be sure to read this article and pay special attention to associating your devices with an Apple ID. There are important restrictions you should know about. -
I haven't been able to find any answers that solve my problem. My Ipad will not leave the Apple logo. I hold both buttons and the screen goes black and then the Apple logo immediately pops back up. I can't get the red slider screen at all. No matter how many times I hold down both buttons the screen goes black and then the Apple logo pops right back on.
Before you do anything else, try charging via a wall outlet for a while, since its off. Then try turning it back on.
When you put the device into recovery mode it allows you to restore the device when no other options work. You do risk losing everything currently strored on the ipad itself. Hopefully you've performed regular backups either via itunes, icloud or both. Evern if you have synced content to either of those, you may not lose everything. All previous purchases have been saved in the itunes and app stores, so you can dowload them again.
while the ipad is off, press and hold the home button and plug the usb cord into the ipad. You should see a message pop up on the itunes window on your compoter screen that state it has discoverd an ipad in recovery mode.
You should now be able to restore -
Why did Maverick not enable me to access my Documents in the previous format (Grid) and when using the alternative I could not 'clik' to open them. The same applied when I tried to open documents from within my back up disc (LaCie). I had to reinstall 10.8.5 and back up from my LaCie (thankfully) to gain access to all my critical Documents? To deal with this I spent 3 and hlafg hours on telephone to Apple Support ( very helpful - but unable to resolve issues - then 3 hours in Apple Store (again very helpful but only able to assist by clearinng Maverick from my HD and reinstalling 10.8.5. Fortunately LaCie came to the resuce and I was able to back up Mac HD with all my documents but lost about one week of work....!!
Why did I not have the option when upgrading to Maverick to select the new 'Tag" system which I did not want?10.8.5 is the lates ML edition. I use TM and also carbon copy cloner as my second backup. If I were you and you have a TM backup prior to Mavericks I would try another restore at bootup. You should erase your drive first in that process using disk utitlites and then use TM to put back you apps and files. The other choice is to do an internet recovery and then use TM to restore your apps and files. That should fix the permissions issue. I did the same thing and all was OK including getting my original iPhoto progam (9.4.3), iphoto11 and photos back.
-
Why does apple not remove the malware Genieo
Why does apple not remove the malware Genieo - it takes over the Safari browser even with extensions turned off - firefox works fine but the malware is still alive and kicking on my mac. Should I just uninstall safari and hope the malware is not doing more damage in the background?
Hi Sickof --
Apple has never had anything to do with Genio. It is sneakily installed with other apps you think would be helpful. It is very sickening, IMHO.
Here's a thread here -- It's long, I know, but it's got great information for you.
https://discussions.apple.com/thread/4497906?start=0&tstart=0
Keep reading. It's worth it. -
I get this error message"your operation could not be completed" I need help figuring out why I can not access the web page.
amarilysfl wrote:
"Your disk could not be partitioned. An error occurred while partitioning the disk".
https://www.apple.com/support/bootcamp/
If you were using Apple's BootCamp and received this message, quit it and open Disk Uility in your Applicaitons/Utilities folder.
Select the Macintosh HD partition on the left and select Erase and Erase Free Space > Zero option and let it complete (important) this will check the spare space for bad sectors that can cause issues formatting partitions.
Once it's completed, try creating a partiton again in BootCamp.
If that doesn't work, then hold command option r keys down while connected to a fast internet connection, Internet Recovery should load (spinning globe) and then in that Disk Utility, select your entire internal drive and click > First Aid > Repair Disk and Permissions.
reboot and attempt Bootcamp again.
If you still get a error, it might be that you have OS X data on the bottom area where BootCamp partition needs to go. This would occur if you had the drive or computer for a long time or wrote a large amount of files to the drive and nearly filling it up and then reduced some, but it left traces in the area BootCamp needs to go.
To fix this
BootCamp: "This disc can not be partitioned/impossible to move files."
How to safely defrag a Mac's hard drive -
Why can I not change the apple id associated with iphoto and imovies
Why can I not change the appleid associated with iphoto and imovies
Is it not your Apple ID? Is this a used Mac? If so, the Mac, OS X and the iLife apps are all registered to the original owner of the Mac.
When someone sells a Mac they should erase the Mac and reinstall the most recent version of OS X that came with the Mac. And they should call Apple Care and have the Mac, the OS and the iLife apps disassociated from their Apple ID. Can you call the original owner and request that? -
Why i can not see the columns of "Tax Category" in transaction code FS00
Dear Experts,
Why i can not see the columns of "Tax Category" and "Posting without tax allowed" in tab of "Control Data" transaction code FS00?
How can i add the columns of "Tax Category" and "Posting without tax allowed"?
Looking forward to your reply.
Best Regards,
MerryHi,
Go to transaction OBD4, and check whether the field "Tax category" is suppressed in group "Account control" for your GL account group.
If not, then go to OB26 and check the field status for the same field for create, change activity.
Regards,
Gaurav -
Why can I not disable the guest user in the 10.8.2 update? I have never enabled the guest user, but after the update, it was automatically enabled with a "managed" tag. It is not selectable even after entering my admin password to unlock the options. I was able to select the account under "parental controls", but again, could not delete it. Why Apple? Why?!!????
SOLVED Ok. I actually was able to disable it. I had to actually log in as the guest user to make it accessible in the preference window. Then I disabled it and logged out. Apologies if this was obvious for some people, but I have had some sort of issue with something every update since Snow Leopard.
-
HT1454 why i can not get video out from my ipod touch after i did the upgrade
why i can not get video out from my ipod touch after i did the upgrade
why i can not get video out from my ipod touch after i did the upgrade
-
I have upgrade ios 6 to ios7 on my iphone 5. I do NOT like it at all. I want to come back to the previous version. why is it so complicated? Why can I not find the instruction strait from apple? This is the worst possible upgrade ever. It make me think of when ericsson got sold to Sony....drastic PC change.
I would like to have simple instruction on how to downgrade.
It feel like a change that I did not ask for , ok I push the upgrade buttom, but really this is the worst update aver!
HELP!iPhone User Guide (For iOS 7 Software)Sep 20, 2013 - 23 MB
Maybe you are looking for
-
HFR - Tried to create a bottom line / border line on EVERY single page
Currently deal with this issues - Trying to make my report in HFR to perfect. I have a report created in HFR. It vary, can run from 2, 3, 4 ,5 pages. The PROBLEM: at the bottom of each page, there is no line (go across the page) to close that page. e
-
How do I obtain and/or interpret __interval & _collInterval?
I have a use case where I need to upload event log entry metrics that have occurred during the interval collection period. I have tried to use two properties collInterval and _interval to achieve this and am not having any success with either. Using
-
Batch change file date to match exif date
Hi All- I recently got a mac pro. Upon importing my photos to iPhoto, the file date for each is set to the date of the import. When using the mac photo screensaver, the date that shows up for everything is the import date, rather than the date the ph
-
Why do I get an error page when I select Toolkit for CreateJS? I am using CS6 Flash Pro.
Why do I get an error page when I select Toolkit for CreateJS? I am using CS6 Flash Pro.
-
A newbie here. I understand (I think) that this warning arises when the same smart object is used on multiple pages. But since the smart object creates an image file such as a JPEG or GIF, why do I have to create new target files when all I want to d