Why System.arraycopy function does not follow java naming conventions ?

System.arraycopy should be
System.arrayCopy....
can anyone tell me why is it so ?

BigDaddyLoveHandles wrote:
DogsAreBarking wrote:
System.arraycopy should be
System.arrayCopy....
can anyone tell me why is it so ?Because it dates back to the early days of Java, back when rocks were soft. Note also that java.awt.GridBagLayout has several methods that start with capital letters! Shocking!Hmm, I never noticed that. And in version 1.4 they apparently added identical methods which names that start with lower case. Now that's a funky API :-)
Along the same line, one thing that irks me is that eclipse keeps suggesting
Color.blackas the first auto-completion choice when I type
Color.BThe horror!

Similar Messages

Why can't I find events with cmd-F? I can see the appointment I am searching for, but the search cmd-F function does not find it. Why is this. It used to work...

Why can't I find events with cmd-F? I can see the appointment I am searching for, but the search cmd-F function does not find it. Why is this. It used to work...

Why can't I find events with cmd-F? I can see the appointment I am searching for, but the search cmd-F function does not find it. Why is this. It used to work...

The System.arraycopy Functionality and copying array question

When created arrays such as String[] myStringArray (for example), is it general good practice to use the System.arraycopy function to copy the array?
Why isn't it good practice to use equal instead? Would this work just as well?
String[] myStringArray = new String[] { "My", " Test"};
String[] myStringArrayCopy = new String[myStringArray.length};
myStringArrayCopy = myStringArrayCopy;Or is that just going to make them the same element in memory and if I change myStringArray in antoher part of the program that means myStringArrayCopy will change as well since it is the same thing?

Youre right, the equals sign just assigns the new array same reference in memory as the old array so they are pointing to the same data.
Im 90% sure of that.
If you want to work with an array without changing the original array id suggest using the System.arraycopy method. If you dont mind the contents changing then use the = sign..(but then why use a new array at all?)
Hope this helps, if not theres loads of more experienced people on the boards...
Ocelot

System.out.println does not print out anything

I'm wonder why the dos mode does not print out the System.out.println.
My code has:
import java.io.*;
import javax.servlet.*;
import javax.servlet.http.*;
public class test extends HttpServlet {
   public void doGet(HttpServletRequest request,
   HttpServletResponse response) throws IOException,
   ServletException {
      System.out.println("Hello");
The compilation is ok... but it does not display anything... how come?

"System.out.print()" prints to the log file of the tomcat server. in order to print on the screen use JspWriter.
import java.io.*;
import javax.servlet.*;
import javax.servlet.http.*;
public class test extends HttpServlet {
public void doGet(HttpServletRequest request,
HttpServletResponse response) throws IOException,
ServletException {
response.setContentType("text/html");
PrintWriter out = response.getWriter();
out.println("Hello");
//System.out.println("Hello");
Hope this helps!

Has anyone been able to contact Adobe to learn why their Flash Player does not work on Mac OS 10.6.8, no matter how many updates you install? This seems like a big error by Adobe.

I have thee Mac computers with Mac OS 10.6.8, one of which is a Mac Pro. No matter how many updates I install from Adobe, their Flash Player does not work on any of these 3 computers. I don't know how to contact Adobe Systems about this problem, but I think it is their responsibility to make sure that their so-called "universal" software works proplerly on a relatively recent operating system like OS 10.6.8 that is still in widespread use. When you install the updates, nothing happens -- not even an error message. What is the point of a universal player that is not universal? It works fine on my MacBook Pro with OS 9 Mavericks, but it does not work at all -- indeed, has never worked -- on my 3 Macs with OS 10.6.8. Has anyone contacted Adobe Systems to find out why the Flash Player does not work with OS 10.6.8 and what they plan to do about it?

Where are you getting Flash from?
Get the appropriate dmg installer here and then run it.
http://www.adobe.com/products/flashplayer/distribution3.html
If it still won't install, do these two things: First uninstall any Flash by going into the second level Hard Drive Library>Internet Plug-ins, and trash the Flash Player.plugin and flashplayer.xpt. Then boot into Safe Boot, Shift at the startup chime (give it much longer than a usual boot) and run the installer while booted in Safe Boot.

Since I installed Lion on my macbook the LED light does not pulse when I close the screen - the sleep function does not work.

Since I installed Lion on my macbook the LED light does not pulse when I close the screen - the sleep function does not work neither when chosen after pressing the button nor chosen in the apple menu..

I have had the same problem but on another forum it was suggested that disabling internet sharing would solve this. This fix seems to work on my machine - why it works I do not understand

Palm Desk Top 6.2 Address Look Up Function Does Not Work In Windows 7

I recently upgraded my desk top computer's operating system from Windows Vista Home Premium to Windows 7 Home Premium.  I synchronize with a Palm Tx PDA.  HP PalmOS customer support Chat helped me work through a compatibility issue that was preventing display of Address, Calendar, Memo and To Do items on my desk top computer via the Palm Desk Top 6.2 application.  I now find that the address look up function does not work (although it worked fine when I was running Vista). Without success, I tried running the repair tool as well as reloading the software (both overlay and clean reinstall). I would appreciate any help or suggestions to fix?
Post relates to: Palm TX

Hi,
844869 wrote:
CREATE TABLE TEST_EMPLOYEES
FIRST_NAME VARCHAR2(26 CHAR),
GRADE VARCHAR2(5 CHAR)
INSERT INTO TEST_EMPLOYEES (FIRST_NAME, GRADE) VALUES ( 'William', 45 ); ...Thanks for posting the CREATE TABLE and INSERT statements; that's very helpful.
William&45     1
Robin 43     1
Raymond          43     1
Richard          43     1
Karen          28     1
Michelle               1
Jonathan               1
Mark               1
Ann               1You may have noticed that this site normally doesn't display multiple spaces in a row.
Whenever you post formatted text (such as query results) on this site, type these 6 characters:
\(small letters only, inside curly brackets) before and after each section of formatted text, to preserve spacing.
This is one of the many helpful things found in the forum FAQ {message:id=9360002}
Are the results above what you're getting with some existing query, or are they the results you want?
If those are your current results, post your query. In that case, what are the results you want? Do you want this?FIRST_NAME GRADE RNK
William 45 1
Robin 43 2
Raymond 43 2
Richard 43 2
Karen 28 5
Michelle 6
Jonathan 6
Mark 6
Ann 6
Edited by: Frank Kulash on Feb 21, 2013 2:39 PM
I see you've added the desired results to your original message.
Here's one way to do that:SELECT first_name
,     grade
,     RANK () OVER (ORDER BY grade NULLS FIRST)     AS rnk
FROM     test_employees
ORDER BY grade          DESC     NULLS LAST

Source system BID-010 does not exist

Hi,
I have installed BI statistics in BI 7.0 in Dev.While transporting to QA system, I am getting the following error message:
"Source system BID-010 does not exist"
Can anyone please help!!
Thanks,
Dipti

Hi Siggi,
Thanks for your reply.Logical system BID was not there in QA.I have made the required changes.
I also received an error as " There is no DataSource with these attributes
Reference to transfer structure 0TCTBWOTYPE_TEXT_HA not available. No activation possible. "
I checked in table RSTSODS ,transfer struct 0TCTBWOTYPE_TEXT_HA" is active.
Can you please help..
Thanks
Dipti

New iMac (10.9.4) & now my HP Photosmart 6520 "scan to computer" function does not work

Recently upgraded to a new iMac running 10.9.4. Printing works well from this computer and all other devices (iPad, iPhone, etc.). However, the "scan to computer" function does not work. In the "Scan" section of HP Utility when I click on "Scan to Computer" the error message reads "Scan to Computer Cannot Be Enabled. The software required for Scan to Computer could not be located on this computer. Please download and install the latest HP recommended software for your device from http://www.hp.com/support, and then try again.
Of course I have done this... twice... still no luck. Also ran Software Update and there was an update, but it made no difference.

Yes, did all that... in order. It did not resolve the problem. However, I did find what appears to be the answer. After re-installing the driver software DO NOT immediately follow the prescribed steps. Instead, quit the installer, restart the Mac, and an Apple software update will appear after restart. Install that software update, and even though the computer and software do not call for it, restart the Mac again. Only then add the printer and follow the balance of the steps. It works! Thank you for your help.

Hp the system recovery media does not support this computer, WIN7 GS72 Notebook

HProduct: GS-B66US (17" I3 notebook)
OS: Win7
Bios Rev: F.47
Error message: "hp the system recovery media does not support this computer. You are not able to restore this system"
Changes made to system: Updated bios (I think).
Getting error messages (at system boot, as windows start, and from the intel hard drive controller) warning me to backup data and hard drive my fail.
I replaced the harddrive and inserted the first of my 4 recovery DVDs (created before I updated the bios). After booting from the first recovery disk I get the following message
"hp the system recovery media does not support this computer. You are not able to restore this system with the media"
The computer still boots with the old hard drive (with drive failure imminent messages) I do see support assistant offering another bios update but I did not install it with the hard drive problem
PLEASE HELP
TIA

Hi,
I think there could be two possible reason. wrong media or systemboard is changed.
did you create any recovery media yourself or you ordered the recovery media from hp? also, was there any systemboard replacement done before?
media created on some other computer (same model) may not work on your computer.
you can order the media from hp.com here.
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c00810334
also once systemboard is replaced you need to get the configuration settings done for BIOS(only HP can do it).
hope it helps
Regards,
WW
“I am an HP Employee“
***** Click the KUDOS star on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem***

Crystal Report for VS2010 - The Go To Page function does not work

When running a report into Crystal(VS2010), the Go To Page function does not work. Typing in a page number and pressing Enter does not take you to that page. The report remains on the current page. I'm not sure if there is suppose to be a button like the one in Crystal 8.5(VS2008).

As long as you are using the CR assemblies for VS .NET, the viewer (Win) should look like this:
Remember, the ActiveX viewer based on the Report Designer Component (RDC, referencing craxdrt.dll) is not supported in VS 2010.
- Ludek
Follow us on Twitter
Got Enhancement ideas? Try the SAP Idea Place
Share Your Knowledge in SCN Topic Spaces

Cat0-3750 upgrade. Error: system number 1 does not support the same feature

I am trying to upgrade or rather downgrade from ipadvservices (inadvertently upgraded to) to ipservices on a stack of Cat-3750s, but I get the following error message:
Ios Image File Size: 0x00877A00
Total Image File Size: 0x00B04200
Minimum Dram required: 0x08000000
Image Suffix: ipservicesk9-122-37.SE1
Image Directory: c3750-ipservicesk9-mz.122-37.SE1
Image Name: c3750-ipservicesk9-mz.122-37.SE1.bin
Image Feature: IP|LAYER_3|PLUS|SSH|3DES|MIN_DRAM_MEG=128
Error: The image in the archive which would be used to upgrade
Error: system number 1 does not support the same feature set.
Any ideas?
Chris

I was having the same issue even with entering the following:
archive download-sw /overwrite /allow-feature-upgrade tftp://172.18.108.26/c3kx-sm10g-tar.150-2.SE7.tar
I noticed the image which was running on the switch was correct without the ".bin" at the end:
3560#sh ver | i image
System image file is "flash:c3560e-universalk9-mz.150-2.SE7"
I uploaded a fresh IOS image from CCO and made sure the image name had ".bin" at the end. Seems trivial except the error is produced through a sanity check. See below (please excuse the extra unplugging in the output):
3560#sh ver | i image
System image file is "flash:c3560e-universalk9-mz.150-2.SE7.bin"
3560#$de tftp://172.18.108.26/c3kx-sm10g-tar.150-2.SE7.tar
Loading c3kx-sm10g-tar.150-2.SE7.tar from 172.18.108.26 (via Vlan1): !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!                             !!!!!!!!!
Mar 30 01:33:35.480: %USBFLASH-5-CHANGE: usbflash0 has been removed!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Mar 30 01:34:15.636: %PLATFORM_ENV-1-FRU_PS_ACCESS: FRU Power Supply is not responding!!!!!!!!!!!
[OK - 24893440 bytes]
Loading c3kx-sm10g-tar.150-2.SE7.tar from 172.18.108.26 (via Vlan1): !!!
Mar 30 01:34:35.593: %PLATFORM_ENV-6-FRU_PS_OIR: FRU Power Supply 2 removed!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!                             !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
examining image...
extracting info (100 bytes)
extracting c3kx-sm10g-mz.150-2.SE7/info (499 bytes)
extracting info (100 bytes)
System Type:             0x00010002
Ios Image File Size:   0x017BDA00
Total Image File Size: 0x017BDA00
Minimum Dram required: 0x08000000
Image Suffix:          sm10g-150-2.SE7
Image Directory:       c3kx-sm10g-mz.150-2.SE7
Image Name:            c3kx-sm10g-mz.150-2.SE7.bin
Image Feature:         IP|LAYER_3|MIN_DRAM_MEG=128
FRU Module Version:    03.00.78
Updating FRU Module on switch 1...
Updating FRU FPGA image...
FPGA image update complete.
All software images installed.
Worked for me, hope this helps.

My search function does not work. How can I fix it?

Hello
I need help I just bough a macbook 13 inch, with snow leopard
and the search function does not work.
The window opens but when I write the name i searh it gives me no results.
How can i fix it?
Do i need really to re install all snow leopard?
thanks
pt

Hello paola t & welcome to the forums
I need help I just bough a macbook 13 inch
It may be that Spotlight hasn't completed indexing just yet - is there a dot (indicates busy) inside the magnifying icon top right?
Also, check System Preferences/Spotlight to see what if any exclusions are configured, etc.

Mail search function does not work after reinstalling

Hello!
I recently had to re-install Leopard on my MacBook Pro.
I made a clean install so, I manually copied the Mail folder and preferences from my old home folder to the new one.
All mails are present, and everything works great, apart from the fact that the search function does not work.
I can search for new mails (that came after the reinstall) but the old ones "dont exist" as far as the mail.app goes.
What can I do about it ?

It would probably be easier to do the entire hard drive. The App Store also uses Spotlight, so updating it will help there also. It takes some time to re-index and your computer will/may run slower until it is done.
Direct answer to your question is go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Then go to System Preferences/Spotlight per the linked article and in your user folder, select Library/Mail/V2.
Thanks to leonie for some information contained in this.

Why a bdc program does not run background

<b>why a bdc program does not run background</b>
Thanks.

HI,
BDC programs can run in the background, If you use the Functionmodules which is Uplpoad a file from Presentation server or Upload from presentation server then we can not use the Program in the Background processing. if the BDC program does not have these function modules then we can use the program in Background
Regards
Sudheer

Why System.arraycopy function does not follow java naming conventions ?

Similar Messages

Maybe you are looking for