Why the standalone server unable to instantiate a bean?

I am using JDeveloper 11.1.1.2 and working on an application that has dynamic regions.
The application was running fine within the Integrated WLS. But I got the following errors when the application run within the standalone WLS 10.3.2:
: JspServlet error: Servlet unable to dispatch to the following requested page:
The following exception occurred:javax.faces.FacesException: oracle.adf.controller.ControllerException:
ADFC-10001: cannot instantiate class 'com.amec.convero.converoview.backingBean.DynamicRegionManager' class
The "DynamicRegionManager" is a session bean defined within the adfc-config.xml.
Why do I get this error only when running in a standalone WLS?
The application has no security setup at this point.
Any insight to debug/address this issues is appreciated!

Difficult to say without knowing how you have it all setup.
I can tell you what we did though when we used a proxy server.
We used AD and group policy to set the proxy server in users web browsers (I say we but it was the server guys, no idea about configuring AD etc. :-)).
You can add exceptions to this and we added an exception for our internal domain name so the browser would ignore the proxy server setting for internal requests and go direct to the web servers.
Jon

Similar Messages

When Starting OC4J, why the report server doesn't start automatically? !!

Dear All,
I have DS 10g on my system and I start the OC4J when I have to run either forms or reports.
But when I attend to start the do the following command from the form:
WEB.SHOWDOCUMENT(..../getjobid<jobid>?server=<servername>...), I have an error: FRM-41213: Unable to connect to the report server <servername>.
I noticed that if I run the following URL:http://<server>:.../reports/rwservlet, it gives me a list of command, but the server still not running..But if I add any command to the above URL like for example "getserverinfo" or "showjobs" then the server is started. Now, and after the command, if we return back and we run the report from the form, the report will run successfully.
The question WHY??
Regards,
Joe
Message was edited by: Joe
Joe Farah

Hello,
That's the way it works ...
http://download-uk.oracle.com/docs/cd/B14099_17/bi.1012/b14048/pbr_strt.htm
2.1.3.1 Starting the In-process Server (Windows and UNIX)
If you are using Reports Server as an in-process server (the default configuration), sending a run report request starts the in-process server; however, if you are sending a request through a command line, the servlet must be invoked first using either the run report URL or the Web command URL. When you have successfully started the servlet, this also means you have successfully started the in-process server.
If you use "Oracle Application Server", the "in-process" reports server will be started automatically by opmn ...
Regards

The Director role is optional in Lync Server 2013 - could anyone please explain why the director server has lost its importance??

Could anyone please explain why the director has been removed from spotlight as it had much importance in LYNC 2010 and now being an optional role in LYNC server 2013.[any call flows regarding director servers would be much useful]

Hi SJ Praveen,
A Director is a server running Lync Server 2013 that authenticates user requests, but does not home any user accounts. Lync 2013 Front End servers have the same registrar service and functionality
as the Director.
The Director isn't providing any special functionality. If the Director goes down, all pools would become inaccessible when the clients queried DNS for the SRV record until an administrator
makes a manual internal DNS change that points users to a Front End pool to handle the sign-in request from Lync clients. Microsoft has made the Director functionality relevant for organizations that have specific security requirements, such as allowing all
external users to register to a specific internal server instead of the Front End servers. This server role is merely optional and not needed for most Lync Server 2013 deployments.
Best regards,
Eric

Why the weblogic server 8.1.4 throws NullPoniterException?

Recently my weblogic server 8.1.4 throws the exception as follows:
java.lang.NullPointerException
at org.apache.struts.action.RequestProcessor.getServletContext(RequestPr
ocessor.java:1136)
at org.apache.struts.action.RequestProcessor.doForward(RequestProcessor.
java:1062)
at org.apache.struts.action.RequestProcessor.processForwardConfig(Reques
tProcessor.java:455)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.ja
va:279)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:148
2)
at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:507)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run
(ServletStubImpl.java:1053)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java:387)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:28)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.ja
va:27)
at com.whir.common.util.SetCharacterEncodingFilter.doFilter(SetCharacter
EncodingFilter.java:93)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.ja
va:27)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationActio
n.run(WebAppServletContext.java:6316)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(Authenticate
dSubject.java:317)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:
After the exception is thrown, the weblogic server 8.1.1 can't work normally. How can I deal with this problem?

Alright Now I have only a copy of Weblogic 8.1.4.
So now what I am doing now is, I'm currently download 10.3.3 Server and installed it onto my pc.
Which means to say I will have 2 different version of server on one PC.
Is it possible for my to run these 2 different version server on one PC?

Why the LDAP server does not accept any connection upon the installation of iPlanet Application Server Enterprise Edition 6.0 Test Drive Phase II

"I am carrying my tests under W2000 with all the default installation options. I've checked the user ID (admin), password and port are correct. However, I was not able to start the Netscape Console and also, the kregedit exited with messages:
Could not connect to LDAP server on cr7260et017 port 389 as user cn=Directory Manager: Can't contact LDAP server
GXBindInit: GXBindBasic failed
GXContextInit: GXBindInit failed 2
[18/Jan/2002 13:56:48:3] error: ENGINE-context_init_failed: EngineClassSpace ContextModule.createContextInit failed:
error: could not get context
*** Errors in initialization from registry ***
Errors in initialization, exiting ..."
(previously submitted to Portal Services/Wireless)

Hi,
I'm not sure if there are known issues with iAS test drive and Windows 2000 howevere I would like to help you in cracking the error.
The GXBIND error appears only when the iAS is not able to communicate with the directory server. In our case, let us proceed by the following...
1. Check if the directory server is running. Verify this by checking the services and look for an entry for directory server and it must look something like
"Netscape Directory Server 4.1 (machine name)" and the status is started.
2. Next, if you are not able to start the console of directory server, then you must check if the directory administrative server is running. This is also verified with the services and look for the entry...
"Netscape Administration Server 4.2" and the status is started.
3. Next, if both of the above are running, then you need to login to directory server console by using cn=Directory Server and issuing the password. If you are able to login successfully then, iAS will work, if not, then rectify the problem with directory server and I'm sure iAS will work.
4. If you have forgotten the password for cn=Directory Manager, then there is a work around for fixing the password in directory server and iAS.
Please let the outcome once you have done this.
Regards
Raj

Why the J2EE server doesn't compile my JSP ?

I made up a simple JSP to start learning J2EE, i tried it on an Java IDE on my PC and it works; when i try to deploy the page on my web site host server(supporting J2EE) and execute it, i got a blank page only.
Browsing the Html code, i see the same code i wrote; the JSP special tags have not been executed.
What's wrong ?
Have i to deploy the page in a particular way, or it is a J2EE server problem?
This is the simple page :
<%@ page contentType="text/html"%>
<html>
<head><title>JSP Page</title></head>
<body>
<%= "Java Server Page"%>
</body>
</html>

Try this:
<%@ page language="java" %>
<html>
<p><%= "Java Server Page"%></p>
</html>You don't need to that content HTML stuff - the JSP knows that it's going to send HTML down to the browser.
It works on my machine deployed in a WAR and running under Tomcat 4.1.27. Here's the HTML I get when I "View Source":
<html>
<p>Java Server Page</p>
</html>Works fine. - MOD

Why do i get the message server error when trying to restore my icloud backup i dont know if my backup was completed

hi can anyone tell me why the message server error shows
i did a icloud backup and have not been able to see if it was completed
i now have a replacement iphone and want to know how i get the files back
please help

Hi there n@nnydee!
I have an article for you that will give you some steps to go through in order to troubleshoot this issue with restoring from your iCloud back ups. The article can be found right here:
iCloud: Troubleshooting restore issues with iCloud Backup
http://support.apple.com/kb/ts4036
Thanks for using the Apple Support Communities!
Cheers,
Braden

CLI104 Unable to communicate with the administration server:

i am doing a glass fish clustering with load balancer plugins using SJWS7.0 as the loadbalancer.
i installed glassfish v2.1 and set up a cluster with a single node and single instance
and i did all the steps as per this document
https://glassfish.dev.java.net/javaee5/build/GlassFish_LB_Cluster.html
i did all the steps with out any errors.
but when i am trying to run the commad <websrvr_install_dir>/bin/wadm deploy-config --user=<websrvr_admin_user> <websrvr_instance_config>
i am getting following errors
CLI104 Unable to communicate with the administration server: Unable to connect t
o admin-server. Please check if the server is up and running and that the host
and port provided are correct.
i don't how to fix this error , i search a whole day for fixing this errors.now i am waiting for help .please help me to fix this one
Thanks and Regards

The glassfish document that you mentioned does not provide any instructions to start the web server's administration server.
Could you verify that the web server's administration server is indeed running? Do the following to start web server's administration server:
$ <websrvr_instance_dir>/admin-server/bin/startservAfter that step try out the deploy-config command as described in the document.
HTH.

Getting error while deploying New WebService project on standalone server

Hi,
I have created a new Model project for WebService and I am able to test this new webservice project by launching "TalentTasksServiceImpl.java" file locally but getting some error while deploying it on standalone server. See below log for more details,
08:03:16 PM INFO: Unable to load annotation javax.interceptor.Interceptors for parsing. The annotation is ignored.
08:03:16 PM INFO: Unable to load annotation javax.interceptor.Interceptors for parsing. The annotation is ignored.
08:03:16 PM INFO: GenericWSWarAnnotationListener.parseAnnotatedClass Adding Servlet Mapping with URL pattern /TalentTasksService for annotated WebService class oracle.apps.hcm.talent.common.tasksService.applicationModule.server.TalentTasksServiceImpl
*08:03:16 PM Error: Could not load endpointInterface oracle.apps.hcm.talent.common.tasksService.TalentTasksService*
08:03:17 PM #### Deployment incomplete. ####
08:03:17 PM WSA process exited with code 1.
I have verified the jar selection mention on this forum link: help..
Any help on this will be greatly appreciate.

Yes Frank. Ours is an SDO service created as per [Service enabled Application Modules|http://docs.oracle.com/cd/E23943_01/web.1111/b31974/bcextservices.htm#CJAJGIEB] . We have created the deployment profile as a 'Business Component Service Interface' profile.
Our attempt to deploy onto standalone from Jdev also fails with the same error. Unsure why the interface is unable to load - Error: Could not load endpointInterface oracle.apps.xyz.common.tasksService.TasksService.
Does this mean, the deployment process is unable to locate this interface? We have cross checked our deployment profiles quite a few times and could not find anything amiss.

Data Services- The job server you selected is not working

Long Text:
After logging in to the Data Services designer,when try to run a job it shows error -The job server you selected is not working
Latest Software version -BODS 4.0 SP2
Reproduce Steps:
1. Double click on the Project from repository, it will display the project in Project area.
2. After that it will display all the jobs under the project.
3.Right click on the job and try to execute, then it will display the "Execution Properties" windows.
Here the we can the default Job Server has been selected.
4. Try to click ok to execute the job and then we get the error-"The job server you selected is not working"

Hi
Please contact your Data services administrator to check on the server why the job server is not working.
There might be several issues like connectivity with the repository, access details , mapping in the management console etc.
And let us know the exact issue.
Regards
Puneet

[Forum FAQ] How to sync time with a Domain Controller for a standalone server

As we all known, if a computer belongs to an Active Directory domain, it will sync the time automatically by using the Windows Time service that is available on Domain Controllers.
While a standalone server will synchronize with its local hardware time and Windows time server. (Figure 1)
Figure 1.
Under some circumstances, a standalone server is necessary in a product environment. We can sync the time of this standalone server with the Domain Controller using
the steps below:
1. Modified the value of the AnnounceFlags:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\Config
Under this entry we can see the default value of AnnounceFlags is 10 (Decimal), we configure the value as 5 (Decimal). (Figure 2)
Figure 2.
2. Confirm the value of the registry key below is set to 0:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\TimeProviders\NtpServer
Figure 3.
3. Configure the standalone server to synchronize with a specific time source (Domain Controller).
In our test, we configured our Domain Controller (192.168.10.200) as the time source. Used the following commands:
w32tm /config /syncfromflags:manual /manualpeerlist:192.168.10.200
4. Sync the time with the Domain Controller using the command below:
w32tm /config /update
From the figure below (Figure 4), you can see the after we did all the steps above, the time on the standalone server was synced with the Domain Controller.
Figure 4.
(Note: Peerlist is a separated list of DNS servers, or IP Addresses for the time servers)
More information:
Windows Time Service Tools and Settings
http://technet.microsoft.com/en-us/library/cc773263(WS.10).aspx#w2k3tr_times_tools_dyax
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Thank you for the instruction! I am sure it is one of the scenarios that majority of administrators will run into. So I suggest to write a wiki about it and publish it for this month's TechNet Guru in Windows Server section. This month's TechNet Guru can
be found here:
Calling All Wise Men! Windows
Server Gurus Needed! Apply Within! No One Turned Away!
Thanks for your informative post. :)
Regards.
Mahdi Tehrani |
|
www.mahditehrani.ir
Please click on Propose As Answer or to mark this post as
and helpful for other people.
This posting is provided AS-IS with no warranties, and confers no rights.
How to query members of 'Local Administrators' group in all computers?

Problem occured while starting the Manged server of weblogic9.2

Hi all,
I am cnfiguring the OWSM on 2 machine which are in Clustering mode(Pre-Prod Env)
I have done the installation of SOA SUITE10.1.3.1 for the same.
After installation , i started Admin server.
But i am facing issue while starting the managed server of weblogic9.2 through admin Server Console.(which are clustered).The managed Server state goes to ADMIN and raise the error that failed to start the server.It does not go into RUNNING state.
The error i was recieved is :
*####<May 13, 2009 10:21:01 AM IST> <Info> <ServletContext-/bea_wls_internal> <ggneai65> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1242190261158> <000000> <HTTPClntLogin: Login rejected with code: 'Failed', reason: java.net.ProtocolException: HTTP tunneling is disabled*
*     at weblogic.rjvm.http.HTTPServerJVMConnection.acceptJVMConnection(HTTPServerJVMConnection.java:88)*
*     at weblogic.rjvm.http.TunnelLoginServlet.service(TunnelLoginServlet.java:80)*
*     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)*
*     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)*
*     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)*
*     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)*
*     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)*
*     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3244)*
*     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)*
*     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)*
*     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2010)*
*     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:1916)*
*     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1366)*
*     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)*
*     at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)*
*'>*
because of which deployment of OWSM failed at managed server.
please help me for the same ASAP.
its urgent.
Regards
Gaurav

That is an INFO message you received and would not stop a managed server from starting. To get rid of that INFO message, enable tunneling on the admin server.
Check your node manager log file to see why the managed server is not starting.

Convert JAVA standalone server in Switch over cluster

Hi Experts,
I am too confuse about the procedure to convert my current system in Switch over cluster.
Should I install the standalone server as HA?
Should I separate SCS after creating the standalone server?
Please, help me.
Marilia

Hi Marilla,
Not sure, if I understand your question correctly.
you should install new system as HA and do system copy from Old to new system. If you OS is windows, Please check the MSCS HA installation guide.
http://www.sdn.sap.com/irj/sdn/index?rid=/webcontent/uuid/b09d53ac-8b0f-2b10-6798-ecfd55894839
Thanks,
Arjun

The report server cannot open a connection to the report server database

I have SQL server installed to I can connect to RS using my domain/user account. However, when I try to go to http://<machine_name>/Reports/Pages/ReportViewer.aspx, I get error as
    * The report server cannot open a connection to the report server database. A connection to the database is required for all requests and processing. (rsReportServerDatabaseUnavailable) Get Online Help
          o Login failed for user '<machine name>\ASPNET'
    * I also noticed that after I installed RS,I do not see reports folder under C:\Inetpub. This folder does not exist, I manually created reports virtual folder in IIS and liked it to C:\Program Files\Microsoft SQL Server\MSRS10.MSSQLSERVER\Reporting Services\ReportServer
    * Thsi is obviously permissions issue and I missing something so your help will be really appreciated.
During installation, I always specified user as domain\user.
Thanks

Hi NewToReporting,
From you descriptions, I know you have tow questions: 1.Why the SQL Server Reporting Services does not create virtual directories in the wwwroot? 2. Why the error "A connection to the database is required for all requests and processing" happen? If I have misunderstood, please do not hesitate to let me know.
One of the changes in SQL Server Reporting Services 2008 is the removal of the Internet Information Services (IIS) dependency. So, we won't see report server virtual directories in the wwwroot folder.
The second problem is caused by the user '<machine name>\ASPNET' does not have permission to login the SQL Server database "Reports".
To solve the issue, please follow these steps:
1.Open SQL Server Reporting Services Configuration Manager(Start - All Programs - Microsoft SQL Server 2008 - Configuration Tools)
2.Go to "Database" tab.
3.Click "Change Credential"
4.In the coming dialog, fill the textboxes with this information(some textboxes are not modifiable )
Server: <the server name of the report server catalog database>
Authentication Type: Current User - Integrated Security (This will use the user we are login to connect to the database server.)
UserName:(If selecting "Current User - Integrated Security", this textbox is not modifiable. )
Password:(If selecting "Current User - Integrated Security", this textbox is not modifiable. )
5. Click Next
6.In the coming dialog, configure the following information:
Authentication Type: Service Credential(This will use the user the reporting services running under to connect to the report server catalog database. The user is the one we configured in "Service Account" tab)
UserName:(If selecting "Service Credential", this textbox is not modifiable. )
Password:(If selecting "Service Credential", this textbox is not modifiable. )
7.Click Next to confirm the information.
8.Click Next to apply.
This will auto add the user '<machine name>\ASPNET' to login group, set this user to be the owner of report server catalog database, and also give this user "RSExce" role.
Now, we are able to connect to the report server.
For more information, please see:
Why Leave IIS: http://blogs.msdn.com/bwelcker/archive/2007/12/04/everybody-why-leave-iis.aspx
Configuring a Report Server Database Connection: http://msdn.microsoft.com/en-us/library/ms159133.aspx
If you have any more questions, please feel free to ask.
Thanks,
Jin ChenJin Chen - MSFT

Why do I see 'Unable to check revocation because the revocation server was offline'?

Hi,
In a lab we've been renewing our Subordinate Issuing CA cert fine for 3 iterations. On the 4th renewal attempt, when I try to perform a 'Certutil -InstallCet Cert(4).crt, I receive the message 'The revocation function was unable to check revocation
because the revocation server was offline. 0x80092013'.
Why could I perform a renewal operation successfully up to this point but cant now? What does this message really mean cause no servers are offline?
Thanks for your help! SdeDot

Thanks Paul.
The first error I found in the registry was the DSConfigDN was incorrect due to me copying the commands from another test system.
We didn't specifically code a CDP or AIA on the Root cause each time we renewed the Cert on the Root, on the Sub CA we published the renewed Cert to AD and added the renewed Cert and renewed CRL to the local Root store.
What follows is the RootCA registry.
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\CertSvc\Configuration\FlyByNightRootCA:
Keys:
CSP
EncryptionCSP
ExitModules
PolicyModules
Values:
ViewAgeMinutes           REG_DWORD = 10 (16)
ViewIdleMinutes          REG_DWORD = 8
CAType                   REG_DWORD = 3
    ENUM_STANDALONE_ROOTCA -- 3
UseDS                    REG_DWORD = 0
ForceTeletex             REG_DWORD = 12 (18)
    ENUM_TELETEX_AUTO -- 2
    ENUM_TELETEX_UTF8 -- 10 (16)
SignedAttributes         REG_MULTI_SZ =
    0: RequesterName
EKUOIDsForPublishExpiredCertInCRL REG_MULTI_SZ =
    0: 1.3.6.1.5.5.7.3.3 Code Signing
    1: 1.3.6.1.4.1.311.61.1.1 Kernel Mode Code Signing
CommonName               REG_SZ = FlyByNightRootCA
Enabled                  REG_DWORD = 1
PolicyFlags              REG_DWORD = 0
CertEnrollCompatible     REG_DWORD = 0
CRLEditFlags             REG_DWORD = 100 (256)
    EDITF_ENABLEAKIKEYID -- 100 (256)
CRLFlags                 REG_DWORD = 2
    CRLF_DELETE_EXPIRED_CRLS -- 2
InterfaceFlags           REG_DWORD = 41 (65)
    IF_LOCKICERTREQUEST -- 1
    IF_NOREMOTEICERTADMINBACKUP -- 40 (64)
EnforceX500NameLengths   REG_DWORD = 1
SubjectTemplate          REG_MULTI_SZ =
    0: EMail
    1: CommonName
    2: OrganizationalUnit
    3: Organization
    4: Locality
    5: State
    6: DomainComponent
    7: Country
ClockSkewMinutes         REG_DWORD = a (10)
LogLevel                 REG_DWORD = 3
HighSerial               REG_DWORD = 0
CAServerName             REG_SZ = Server03
ValidityPeriod           REG_SZ = Hours
ValidityPeriodUnits      REG_DWORD = c (12)
CAXchgCertHash           REG_MULTI_SZ =
KRACertHash              REG_MULTI_SZ =
KRACertCount             REG_DWORD = 0
KRAFlags                 REG_DWORD = 0
CRLPublicationURLs       REG_MULTI_SZ =
    0: 65:C:\Windows\system32\CertSrv\CertEnroll\%3%8%9.crl
    CSURL_SERVERPUBLISH -- 1
    CSURL_SERVERPUBLISHDELTA -- 40 (64)
    1: 8:ldap:///CN=%7%8,CN=%2,CN=CDP,CN=Public Key Services,CN=Services,%6%10
    CSURL_ADDTOCRLCDP -- 8
    2: 0:http://%1/CertEnroll/%3%8%9.crl
    3: 6:file://%1/CertEnroll/%3%8%9.crl
    CSURL_ADDTOCERTCDP -- 2
    CSURL_ADDTOFRESHESTCRL -- 4
CRLPeriod                REG_SZ = Hours
CRLPeriodUnits           REG_DWORD = c (12)
CRLOverlapPeriod         REG_SZ = Hours
CRLOverlapUnits          REG_DWORD = 0
CRLDeltaPeriod           REG_SZ = Hours
CRLDeltaPeriodUnits      REG_DWORD = 0
CRLDeltaOverlapPeriod    REG_SZ = Minutes
CRLDeltaOverlapUnits     REG_DWORD = 0
CAXchgValidityPeriod     REG_SZ = Weeks
CAXchgValidityPeriodUnits REG_DWORD = 1
CAXchgOverlapPeriod      REG_SZ = Days
CAXchgOverlapPeriodUnits REG_DWORD = 1
MaxIncomingMessageSize   REG_DWORD = 10000 (65536)
MaxIncomingAllocSize     REG_DWORD = 10000 (65536)
CACertPublicationURLs    REG_MULTI_SZ =
    0: 1:C:\Windows\system32\CertSrv\CertEnroll\%1_%3%4.crt
    CSURL_SERVERPUBLISH -- 1
    1: 0:ldap:///CN=%7,CN=AIA,CN=Public Key Services,CN=Services,%6%11
    2: 0:http://%1/CertEnroll/%1_%3%4.crt
    3: 2:file://%1/CertEnroll/%1_%3%4.crt
    CSURL_ADDTOCERTCDP -- 2
CACertHash               REG_MULTI_SZ =
    0: e0 bb 32 b9 bf f7 43 1d 23 e2 da b6 26 10 33 d8 00 61 e6 14
    1: a8 77 c8 09 af f0 07 4c 70 51 78 80 09 26 b1 05 f5 16 e5 be
Security                 REG_BINARY =
    Allow CA Administrator BUILTIN\Administrators
    Allow Certificate Manager BUILTIN\Administrators
    Allow Enroll Everyone
SetupStatus              REG_DWORD = 1
    SETUP_SERVER_FLAG -- 1
DSConfigDN               REG_SZ = CN=Configuration,DC=TestPKI,DC=Net
AuditFilter              REG_DWORD = 7f (127)
CRLNextPublish           REG_BINARY = 2/28/2015 4:22 AM
CertUtil: -getreg command completed successfully.
Thanks for your help! SdeDot

Why the standalone server unable to instantiate a bean?

Similar Messages

Maybe you are looking for