Why won't Canon Pixma MG5350 print in black and white?

Similar Messages

Why can't I print in black and white only?

Why is the HP Officejet Pro 8600 Plus not able to print black and white only if the black cartridge is still not empty?
What I mean is I went into the settings to set the printer to print black and white only as well as print text only in black. Yet I am FORCED to replace the cyan, magenta, and yellow cartridges because they are depleted. What does cyan, magenta, and yellow ink have anything to do with printing black considering a SEPARATE black cartridge exists and is still full?
I am aggravated at how the driver for this printer is designed TO FORCE me to purchase nonblack cartridges when I purposefully set the printing to be BLACK ONLY. I am unable to go forward with my printing. This is considered a show stopper and is unacceptable considering that the setting I assigned and the cartridge(s) depleted message contradict each other. If the setting is made to print in black and white only including text, then print black and white since I know the black ink is still available.
Take into consideration that printing can take place at anytime. Not being able to use black as my alternate color (WHICH IS NOT EMPTY AND IS A SEPARATE CARTRIDGE) forces me to stop. I am unable to go forward until the store opens. WalMart is not always an option. That is time lost.
The inability to switch to use the black cartridge only is a time waster.
Let's call it for what it is, a form of ransom. HP wants me to spend money on color cartridges that have nothing to do with printing black and white. When I am ready to print in color, that should be a time of my choosing.
Incidentally, the form I am trying to print is black and white only. No color is on this form. It makes no sense to force color printing of a black and white document.
This question was solved.
View Solution.

Hi,
To protect itself specially the printheads, many printers NEED other inks even they only print black. During the warming up process, printers require all inks therefore they may stop before we can continue. Some printers allow user to print (specially the ones which have tri-color ink tank) but they may print at a baby snail speed.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

C3180 won't print just black and white

C3180 is the printer i have and the operating system i'm working on is a mac. macbook pro. i would like instructions on how to use only the black ink cartridge. would i still have to disable the ink detection? i am trying to print a black and white document but my color is out of ink and the black is full. despite this, the doc still comes out in a light grey.. thanks -tegan

Hello tegankrobinett!
The printer model you have is not manufactured by Canon USA. It looks like this particular model is made by HP, so we would suggest reaching out to them for assistance. Thanks!

PSC 1510 All in one printer - won't print even black and white when colour cartridge not recognised

My PSC 1510 All in one printer is flashing the "check printer cartrige icon" and both "Black" and "Colour" icons at the bottom left of the printer.
It won't print at all, even when I select grayscale (black and white). The help pages tell me that if I remove the colour cartridge the printer will switch to backup mode and I'll still be able to print in black and white (though not copy or scan). But this is not the case, and I can find no way of switching manually to backup mode. The help pages have no useful explanation of backup mode. I've also tried cleaning the cartridge (which I'm pretty sure isn't empty) but that makes no difference.
Can anyone help? I'd be very grateful.

gabri21 wrote: I have a very similar problem with my PSC1510 but only the colour cartridge light is blinking. I am also unable to find any useful information to set up printing in back up mode. Can anyone assist in resolving this problem for us?
With only one cartridge light blinking I would suspect the cartridge, they do rarely fail (much more often for reman cartridges, see here). Clean the cartridge contascts as shown here. If that fails and the cartridge is an original HP then check the warranty date as shown here. If the cartridge is in warranty return it to your dealer for a warranty replacement.
The printer will automatically switch to backup mode if the black (or color in some printers) cartridge is removed. I do not know if this works with the PSC 1510, some all-in-on devices insist on having both cartridges present.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Why will my photos only print in black and white?

My computer crashed a while ago and I had to re-install my photoshop elements 6. Since then, photos will only print in black and white through elements, even though they'll print in colour through other programs on my computer. This must be a settings issue in the elements program but I can't find anything that seems to work. Any help would be greatly appreciated!

Hi toxryan,
Thanks for taking the time to help. Issue definitely not resolved.
In Organiser there is no direct print link so I click on 'file' then 'print'. There are no relevant options in the print box - options only deal with type of printer, size of paper etc. If I try 'page setup' there are no relevant options. If I try 'more options' the only mention of colour is 'colour management' where it asks if I want print space same as the source etc.
This is driving me mad. Any ideas?
Thanks
Heather

Photosmart 8750 won't print sharp black and white photos

I am trying to print some black and white photographs using my photosmart 8750 printer. Up until now, I have just done color photographs. After printing my first black and white photograph, I'm very disappointed. While it is definitely gray scale, the dark black colors in the photo aren't coming out black at all...just a shade of gray. I have the gray photo cartridge installed. Is that my problem? Everywhere I read, it says that is what should be used.

Try the troubleshooting steps in this page. Does the diagnostic page print properly?
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Printing in black and white only - looking for a definitive solution

Hi
I've been trying to find out once and for all how to make sure my black and white text documents are printing only from the large pigment-based cartridge (525 PGBK), rather than using the smaller black dye-based cartridge (526BK), or from a combination of the dye-based colour cartridges. I've trawled through endless forums, and finally in frustration I recently called Canon's Australian phone support team.
I thought I'd nailed it. The phone support person told me that if the document I'm printing is definitely black only, then all I need to do is print normally, with grayscale DE-selected. He said nothing about also de-selecting duplex. But I've since read online advice that contradicts this in relation to other models (I haven't found any advice based specifically on the MG6150, apart from the phone guy from Canon). Some say you need to SELECT grayscale and DE-select duplex; others say to DE-select both grayscale and duplex; others say to select grayscale, DE-select duplex, and also select dither (on my screen that's under Main > Print Quality > Custom). I'm now wondering whether I've nailed it after all.
If anyone from Canon is reading this, can you please give a definitive answer to these questions:
1. How do I ensure that my black and white text documents print only from the large pigment cartridge?
2. Can I print in automatic duplex using this method, or do I have to do manual duplex?
2. Will this also work for purely black and white NON-text documents as well (e.g., photos that have been converted from colour to B&W)?
3. If not, is there another way of forcing B&W NON-text documents to print from the pigment cartridge? What about a way of forcing colour documents to print from the pigment cartridge?
4. If my smaller black dye cartridge (526BK) isn't being used up at the same rate as the other dye cartridges, is there a way of forcing the printer to use this instead of the pigment cartridge for B&W text documents, but NOT to mix in any of the colour cartridges at the same time?
5. Does this procedure work for all other Canon printer models in addition to the MG6150, or just a limited range?
Many thanks for your patience in reading this -- I'm really trying to get the best out of my printer rather than give up and buy a different brand, and I'm sure others would appreciate a definitive answer to these questions as well.

I have at MG8100 and it seems that there is no solution to this. I have scoured the web for one and it seems that there is no way to print in black and white only. The grayscale option uses all the colours including black to print.
I have gone through a ton of colour ink just printing black and white documents. Its cost me a fortune and I've worked out that I can get it done cheaper by going to the print shop.
As far as I am concerned this unbelievable. A printer that doesn't give you the option to print using black ink only! And its not advertised or made known in any way. You have to buy the product and then find out later that it does not have a black and white print option. It seems there are a lot of people out there that are unhappy about this, and the "problem" seems to go quite far back. Why haven't Canon responded by adding this feature?! I wont say it here, but I think it must be obvious. Brings to mind the story of housecleaning product manufacturers that increase the size of the closures so that consumers will use more of the product, which is actually wasteful, so as to increase the purchase cycle.
This leaves a really bad taste in my mouth. I'm flogging mine now, and I am done with Canon for good!

Printer only printing in Black and White

My printer ( HP deskjet 920c) is only printing in black and white. How can I change settings to print in color ?

Which version of OS X are you running? I don't see the Deskjet 920c as a supported printer here -->> http://support.apple.com/kb/HT3669#HP.
Usually, on my Canon PIXMA MG8220, it's just a matter of setting up the printer to print in color mode in the Print dialog box.
Clinton

Hoiw do I force my new mf8580cdw to print in black and white only (grey scale)?

First of all I am using windows 7 - 64bit and my printer is the MF8580CDW. I am using the UFRII print driver. I have tried changing one/all of the profiles in the print settings and printer properties to "black and white" printing but the software keeps chainging my selection back to "Auto[Color/B&W]". I have also tried enabling the toner saver option to no avail. When I changed the settings I clicked "Apply". Why is the driver not saving my settings? How do I force the printer to always print in black and white?

Hi,
From the application used to print open the print dialog.
Click Properties / Preferences / Settings to access the Printing Preferences dialog.
Click the Advanced button.
Under Printing Features set the Print in Grayscale value as Black Ink Only.
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Deskjet 3050 does only print JPG files in color - all other docs are only printed in black and white

Dear All,
I have a problem with my Deskjet 3050 Printer. (USB connected with my laptop).
My printer won't print colored documents in color but only in black and white (except for JPG files (photos) which are printed in color.
Word documents or PDF files (for example) are always printed in black and white - even if these are in color.
Copying colored pages with my printer is no problem.
This works perfectly well. The printer is connected to my PC via USB.
The cartridges (color and black and white) are practically new and original HP cartridges.
Could the problem be related to the printer settings which I might have changed by accident.
Thanks in advance for your advise.
Cheticamp
This question was solved.
View Solution.

Hi Cheticamp,
From the control panrl go to Devices and Printers.
Right click the printer and select Printing Preferences.
Cluck the Advanced button and ensure that Print in Grayscale is set as off and confirm.
From Word click on File > Print and click on Settings.
You will see the dame printing preferences screen.
Press Advanced and ensure the grayscale optio is set as off for Word as well.
Hope that helps,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

PRINTS ONLY BLACK AND WHITE

My hp photosmart 5512 will only print in black and white on my gateway PC, but will print correctly on my laptops, does anyone know why?

I tried turning the printer on when it only said 35% but it still printed out in black and white. It hung at 35% after about 3 minutes so I don't think I could have waited it to get to 100%. Usually print jobs get in the queue in a matter of seconds so I don't think the workaround is working for me.

HT204135 my printer works but i can t print in black and white

i hane an epson nx515 it s works but the problem i cant print in black and white ,i have a mac 10.7.3

Using the Preview application as a reference, if you select to print and only see a limited amount of information, you need to press the Show Details button in the print dialog to see the additional menus. Then, if you click on the Preview menu you may see a Color menu and within this could be a Grayscale setting, which will print using only the black ink. This is what I see with my Canon inkjet, not sure what menus exist in the Epson but I would expect there to be something similar.

I can't print in black and white. How do I fix this?

I have a HP Officejet 6400 and I tried printing a PDF from preview and it doesn't give me the option to print in black and white. Why? How do I fix this?

There's a Preview drop-down menu (just says Preview in the Print dialog box) and if you scroll down you should see "Quality & Media with a check box for Grayscale Printing:
See if it works for you.
Clinton

HT3669 I have an HP deskjet color printer that only prints in black and white from my mac ... how do I get it to print in color

I have an HP deskjet color printer that only prints in black and white from my mac ... how do I get it to print in color

Check the printer itself. Some printers you need to set the color & B&W settings on the printer itself instead of the Mac. If that is not the case w/your printer, contact HP tech support and/or post in their forums if they have one.

How can I print in black and white?

I have asked friends how to print in black and white and they show me how to do it on their computers. They do it by just switching the colorysync profile to black and white or greyscale but when I go to print and go to the same drop down menu for colorsync profiles, there are no other profiles.

First, as print dialog box functions vary with the Mac OS version, we need to know what version of the Mac OS you have. "iOS 5.0.1" in your profile is not a computer OS but rather for iDevices. Do "About this Mac" from the Apple menu to see what version you really have. It should be 10.something
Second: control of the type of printing is int eh hands of the printer software, Please post the both the make and model of printer you are using.

Why won't Canon Pixma MG5350 print in black and white?

Similar Messages

Maybe you are looking for