Why won't I even startup?

Earlier in the week I noticed significant lag time when accessing the web and other applications (in what appeared to be regular use of the hard drive) and I heard an ever so faint ticking sound from my hard drive. Fearing a hard drive failure, I restarted and the problem was still there. I restarted with Apple's dagnostic CD and every test "passed". I ejected the CD via mouse at startup and zapped the PRAM. Upon restart, I got only the gray screen with the Apple logo and the spinning sprocket. It spins and spins and will not startup. (I do not see text that says restart).
I tried starting up with the Tiger disc and get to the screen where I choose English as my default language. Suddenly, I get the spinning beach ball and nothing happens.
When I try to restart with Disc Warrior, I get the gray screen as before.
Does anyone have a clue as to what's going on here?!
Many thanks in advance for your help!

Mac 101 may not help with this one. I just had the same thing happen to me. I could boot from the recovery DVD but anytime I tried to boot from the drive it locked up the same as yours at the same spot (the sprocket locked up). When I booted to single user mode, I could move around the hard drive's directory structure with no problem from a terminal session.
I called Apple support and they had me reinstall the OS, the same problem yet again. Long story short, they deduced it was a hardware problem of some type and had me bring it in to the Apple Store. Hopefully I will get it back in a couple of weeks.
I hope you had better luck with me and you got yours started!
iMac G5 20" Rev. B Mac OS X (10.4.3) 250 gig HD 1.5 gig RAM

Similar Messages

Why won't Macbook Pro startup properly without external monitor & keyboard?

If I connect a external monitor and keyboard to my late 2011 Macbook Pro (running Lion) it starts up just fine.
But if I try to start it up without these (or any other devices) attached, I get no display on the internal screen and the internal keyboard is ignored (the caps lock light doesn't light up when the key is pressed).
However, I don't think it's a hardware issue, as a PRAM reset seems to work (I get the second chime) indicating that the keyboard is OK. And I get a second or so of grey screen before the screen goes black.
I've tried resetting my SMC and my PRAM. The latter seemed to fix the problem once - but then it came back, and won't go away again this time.
I've also tried starting in safe, single user, and verbose mode, but none of these seem to make any difference.
I've been having some issues installing Windows (under both BootCamp and Parallels) but wouldn't have thought that these were related.

I have solved my own issue, so wanted to post here in case anyone else encounters the same thing.
My Macbook was less than 90 days old, so I booked a telephone support call from Apple. But they couldn't help. So I booked a genius bar appointment. I turned up, powered up my Macbook, and it worked fine!
Since it was working OK, there was nothing for them to investigate (though they ran some basic diagnostics anyway). But as soon as I got home it stopped working again.
Now this was really weird, so I started eliminate anything that was different between the environments - power supply, cooling pad, laptop stand...
My Macbook normally sits on an aluminium cooling pad, which in turns sits on a steel laptop stand. And when sitting on both of these (or just the stand) it exhibited the behaviour above. However, when I put it on a wooden desk it worked fine! So I replaced the aluminium cooler with a gel pad and it still worked fine. But why...?
I also noticed another difference. Once I reconnected an external display and keyboard, I found that my internal display now stayed on - whereas previously it had gone off (with only the external display staying on).
Searching on the internet, I discovered that this was normal behaviour under Lion, and what I had experienced previously was abnormal behaviour when the lid is open - but normal behaviour when the lid is closed. And since Macbooks use magnets to determine whether or not the lid is open, those who preferred the closed lid behaviour were using fridge magnets to fool their Macbooks into behaving that way.
It seems that my stand and/or cooler was acting in the same way as a magnet, and making my Macbook think that the lid was closed. So the internal display stayed off whether or not I had an external display connected. Isolating it from the stand with a gel pad has resolved this issue.
So I guess that Macbooks weren't designed to be used on metal surfaces...

Why won't my tabs & windows reopen as they should, even tho I have it set for them to do so?

Why won't my tabs & windows reopen as they should, even tho I have it set for them to do so?
"Firefox can be configured to restore all windows and tabs that were open when the application is closed or terminated unexpectedly. This article describes the circumstances under which your session is restored and how you can configure it."
I have it set up, in "Tools", "Options", etc., for my windows and tabs to reopen & be restored to the webpages that they were previously at before I, for one reason or another, restarted my computer! But, after I restart my computer and the Firefox browser, it always goes to my homepage; the windows & tabs NEVER restart as they should!
It wasn't always like this. It has only been within the last few weeks that this has become a constant and consistent problem. I assume that a Firefox update somehow disabled something & that's why it isn't working properly but, whatever...
How do I fix this so that my windows & tabs reopen as they should!?

Have you checked to make sure that under>> Options >> General >> That the startup behavior is appropriately? I had the same problem after upgrading and setting my homepage. It should be set to "show my windows and tabs from last time".
Just re-read your post. sounds like you've tried this already.

Why won't my iphone 3gs charge even though it is plugged in?

Hi guys, so I've had my 3gs for nearly 2 years. A couple of weeks ago I noticed that charging it wasn't going easy. When my iphone shuts down from no battery life and I plug it in to charge, it charges enough to turn itself back on, but when it eventually turns back on it won't charge anymore? Even though it is still plugged in and switched on by the plug. So I have to take out the USB, turn off the switch to the plug, turn the switch back on, plug the USB back in and it charges again.
BUT, recently not even that does it. I've tried different plug sockets, i've rebooted it. I've tried leaving the USB cable in and just turning on and off the plug switch.
So at the moment it's just going through a circle of running out of battery, charging and turning itself back on, having 4% battery and dying again and repeating.
So I googled my problem and didn't really find a solution. I mean the plug and USB cable are fine. Clearly it charges fine because it charges enough to turn itself back on when it's shut down.
I found out that when the iphone is plugged in but turned off it still charges so I tried this when it started itself up again, and it charges!!
But why won't it charge when the phone is on and plugged in??

Hi waplington123,
If your iPhone will not start up unless connected to power, you may want to troubleshoot using the steps in this article -
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Specifically -
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Thanks for using Apple Support Communities.
Best,
Brett L

Why won't my ipod touch sync? It is all up to date and everything, and i know it is connected because when i plug it into my computer it charges, but it doesn't even show that it is connected so i can't sync all my new songs:(

Why won't my ipod touch sync? It is all up to date and everything, and i know it is connected because when i plug it into my computer it charges, but it doesn't even show that it is connected so i can't sync all my new songs:(

http://support.apple.com/kb/TS1538
http://support.apple.com/kb/TS1591

Why won't my line spacing change even after I change the # in the leading panel

why won't my line spacing change even after I change the # in the leading pane

Is this for text you've already typed? Did you select it first? If that's not it, for PSE 11 and 12 go to the far right of the tool options, click the four-lined square and choose Reset Tool. For PSE 10 and earlier go to the far left options bar, click the tiny triangle (or the tool icon for really old versions) and choose Reset Tool.

Why won't adobe flash player run on my computer, even though it tlles me it has installed correctly

Why won't adobe flash player run on my computer, even though it tlles me it has installed correctly?
Regards, bricky3

Thought for Today: “It may be that our prime purpose in life is simply to be kind to others.” – Source unknown.
Hi Pat,
Thank you for your advice – I had not tuned in to the “public forum” implications.
Much appreciated.
Best Regards,
Ray Bricknell
<mailto:[email protected]> [email protected]

HT1351 Why won't movie files from flip camera won't play on ipod even after being converted?

Why won't movie files from flip camera won't play on ipod even after being converted?

Try the standard fixes:
- Reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory defaults/new iPod.

Why won't this song play even after I authorized the computer? It says that I need to authorize the computer, then I enter my username and password and it says the computer is already authorized. But then the song still won't play. What do I do?

Why won't this song play even after I authorized the computer? It says that I need to authorize the computer, then I enter my username and password and it says the computer is already authorized. But then the song still won't play. What do I do?

Use the Apple ID support -> http://www.apple.com/support/appleid/ - click through the contact information and select the iTunes, etc., hot button. You can have Apple call you or email them.
Clinton

TB won't open even though Task Manager says its running. Why?

Windows 8.1.
TB worked fine 'til few days ago.
Now it won't open even though Task Manager indicates it's running.

It is possible that your security software (firewall, anti-virus) blocks or restricts Thunderbird without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Thunderbird and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full, unrestricted, access to internet for Thunderbird.
*https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating

Why won't my Mac, with Mountain Lion installed boot up?

I had problems getting my Mac to boot so I made a Genius Bar appointment at my local Apple Store. The ran some tests and discovered a "disk i/o" error which they said indicated that my hard drive needed replacing. Hard drive replaced, brought it home, restarted, set up, Disk Utility run (permission checks out, disk checks out), Time Machine back up loaded and still all I get is the grey screen with the apple logo and the spinning wheel (not beach ball). Why won't it boot up? Any ideas???

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.a. Boot into Recovery by holding down the key combination command-R at the startup chime, or from a local Time Machine backup volume (option key at startup.) Release the keys when you see a gray screen with a spinning dial. When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode by holding down the key combination command-T at the startup chime. Connect the two Macs with a FireWire or Thunderbolt cable. The internal drive of the machine running in target mode will mount as an external drive on the other machine. Copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 6
Boot into Recovery again. When the OS X Utilities screen appears, follow the prompts to reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
Step 7
Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a backup.
Step 8
A dead logic-board battery in a Mac Pro can cause a gray screen at boot. Typically the boot failure will be preceded by loss of the startup disk and system clock settings. See the user manual for replacement instructions.
Step 9
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested.

Why won't my external hard drive open

So I downloaded mavericks when it came out and now one of my external hard drives will not open but disk utility Will recognize the hard drive but I cannot access the lights on the hard drive work you can feel it spinning but it just won't access I've tried everything I know the hard drive fine why won't my Mac read my drive?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Why won't my MBP 13.3 Retina start up?

Why won't my MBP 13.3 Retina start up? Bought late 2013. First had problems waking it from sleep. Now when I turn it on, the gray screen comes up with the apple logo and then the wheel spins for a few seconds before the screen turns black. The computer has not been dropped or damaged, but it has been used in a tropical climate.

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

Why won't my MacBook Pro's screen turn on?

Why won't my Mac Book Pro's screen turn on at start up?

Test after taking each of the following steps that you haven't already tried. Stop when the problem is resolved. Back up all data before making any changes.
Sometimes the cause of the problem may be an outage in Apple's network, in which case none of the steps below will have any effect. You just have to wait for the outage to be fixed. That should rarely, if ever, take more than a few hours.
Step 1
Sign in to the App Store by selecting Sign In from the Store menu. If you're already signed in, sign out and then sign in again.
Step 2
Log out or restart the computer.
Step 3
Remove or disable "LittleSnitch" or any similar third-party software that blocks outgoing network connections according to the developer's instructions.
Step 4
Start up in safe mode and log in to the account with the problem.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
After testing, restart as usual (not in safe mode.)
Step 5
If possible, connect to a different network and test.
Step 6
There are reports that resetting the PRAM may solve the problem in some cases. I can't confirm.

Why won't Apple give out the unlock code for an iPhone 3Gs when the contract was honored and I am still an AT

Why won't Apple give out the unlock code for an iPhone 3Gs when the 2 year contract was honored and I continued to be an AT&T customer with an iPhone 4. I wanted my old 3gs unlocked so my daughter could use it overseas when she is deployed. AT&T service over there *****, the international plan was not worth it. The individual SIM cards per country are much more reliable and cheaper. Teslestial in Iraq and Afghanistan, Telecom in Croatia,Vodafphone in Germany and Italy. Why Apple will not unlock these phones for our military to utilize is incomprehensible to me. These young men and women are fighting for these Apple people to go to work every day, safe, to live lives they have become accustom to yet releasing a phone to use on another network they can't do at least for the military.... WHY APPLE?? WHY? A good excuse not some of the many lame excuses I have received on the phone many times. AT&T states it is Apple that will not allow them to unlock the phones... Please tell me why? All I want Is my daughter to have a phone I trust, to be able to call me when she is given the free time to do so and I trust the apple phone.
Apple, please reconsider your stance on this issue. I am having a hard time understanding why you will not unlock the iPhone.
A simple code could allow me to talk to my daughter while fighting for our country the Great USA. Apple should be on the front line and enabling those fighting for our life, liberty and pursuit of happiness to use unlocked phones on reliable local GSM networks.
I honestly hope that someone who has some sort of authority to begin allowing the release of unlock codes, and not forcing people to unlock their phones with some program produced by some hack just to be able to use your wonderful phone. That is is in a nutshell, People love the iPhone so much that they want the ability to use it on the most reliable GSM carrier available to them. That should be a major compliment. Even men and women on the front line want your phone. I agree, my service is not the best where I live either, love the GSM technology so stay with it, but if I had the ability to change to the other GSM network that has much better coverage in this area of the country I would change. To change now I would not have my iPhone and that I will not part with.
Apple, please reconsider opening up the lock code and allow your gem of a phone to be used by many more people in many more areas and most importantly overseas fighting for our country. I know if this is really thought about Apple would understand and come to the conclusion to release the unlock codes, and stop the people from hacking in to use the iPhone on other networks.
I would love for my daughter to be able to use my iPhone 3gs while fighting for our Free country.
A response would be appreciated.
Thank you.
An Apple customer for 10 years, phones and computers.
P

Defiled:
I did sign a two year contract and completed that contract. The 3gs is no longer in service. My daughter is going overseas to protect you and your family. I was attempting to find a way for her to have a reliable phone that could offer her some connection with home as she travels through the middle east. She travels in missions all over.
At&T unlocks other phones of theirs why not the iPhone? AT&T says that Apple will not give them the code, it is not the carrier. If I would have known this situation would have come up I would have bought and unlocked 3gs phone"Deggie" . My main complaint is that Apple has not good excuse as to why they will not allow their phones to be unlocked from services well, AT&T . I bought the phone full price, completed the contract terms, even went for and iPhone 4 with another2 year contract, along with owning an apple computer... I love the product. My main issue is give me a good answer as to why you won't allow a phone to be unlocked. It doesn't hurt Apple, People still have to buy the phones from them, and use their App store and iTunes.
Sorry, just upset about my daughter heading over there, boots on the ground, and just pray she will be safe. Would have liked to facetime her while she is in the airports and in specific areas allowed for that.
Please don't come down on me for asking this question. I understand all the contracts etc.... but to single out the iPhone specifically to not unlock after contract is over does not seem fair.
Thank you for your responses.

Why won't I even startup?

Similar Messages

Maybe you are looking for