Wi-fi and data pack...
I've got a new 3gs 16g....with a 1giga internet pack a week. When I stay home i've got a wi-fi connection. Are the data pack (1 giga a week) in standby When I surfing internet in wi-fi at home?.....how can I see what kind of connection is in, when I surf????
Sorry 4 my bad english!
If it says "3G" "E" or "." in the upper left hand corneryou are on cellular data
If it has a "fan" shape of small arcs, you are on WiFi.
Similar Messages
-
Verizon 20$ data pack offered only through best buy?
when you check the verizon iphone 4s on bestbuy.com it says it requires and data pack of at least 20$. but if you check the verizon website it says at least 30$. is this just more false iphone 4s advertising or should i expect to get a 20$ data plan if my phone ever comes in?
This is a promotional plan being offered by Verizon, $20 for 300MB. Limited time to add this feature.
Dan K. | Mobile Specialty Stores
Any opinions expressed in this post are those of
the author and do not represent Best Buy Co., Inc. -
International Data Pack - Notifications Warnings and Alerts
I recently added an $85/300Mb International Data Pack to my iPad. I received no Activation Confirmation, no data usage notificationa at 50%, 85% etc, and no warnings on activation in a new country. I lie awake at night and ponder these things, and the answer is quite simple: If you apply for an International Data Pack to be applied to an iPad (and most likely any Mobile Broadband device) the Pack will be applied OK, and it will work OK, but you will never get any SMS notifications, usage warnings or new country cost alerts!!An iPad SIM is only a 3G device (or 4G on later models) Telstra SMS notifications are in the 2G band, actually not even 2 G, they are sent in the signalling channels associated with voice calls, so SMSs can not technically be received on a 3G/4G Only device such as an iPad!You can try it yourself, turn off any web based messaging such as “iMessage” and send an old fashioned SMS TXT from your phone to your iPad number - your iPhone will not mark it as “Not delivered” but your iPad will never receive it.ps - you dont actually need to turn off iMessage, you can not send an iMessage to your iPad number either!You will see some messages on your iPad, (including SMS messages) but these are messages to your iPhone and only where/when you have your iPad and iPhone messages synced.You will also note that if you turn off iMessage in you iPad settings, you have no options to send an old-fashioned SMS (Thats because it is not technically possible to send (or receive) an SMS from a 3G device!)Others may disagree, so I welcome any debate or alternate opinion
Help - I give up! The website on International Roaming with a pre-paid says: "Usage alertsWe’ll send SMS alerts to keep you up-to-date with your usage. Depending on your Pre-Paid set up you might receive multiple usage and pricing SMS alerts. There is no charge for receiving these SMS alerts.The alerts we’ll send:If you have an International Roaming data pack, we’ll send you an SMS when you’ve have used 50%, 85% and 100% of your data allowance.If you use 100% of your data allowance we’ll send you an SMS reminding you of the cost to use data while overseas.If you’ve set up a Balance Based Automatic Recharge we’ll send you an SMS for every $100 of International Roaming pay-as-you-go (PAYG) data you use.Please note: You can’t opt out of these SMS alerts." Ms_Megahurtz (below) advises me: "....This is why from MyAccount I went into the alerts and enabled email alerts for my iPad so I get those alerts relevant to my iPad Mini 3...." I have been into MyAccount a dozen times, but I can find no path to change any Telstra SMS Alerts (which you can not get on an iPad) to an email alert? I'm a simple emperor of the dark side and the forces of good seem to be prevailing against me, so can anyone help me with keystroke-by-keystroke instructions?
-
Document and Data backup ? - can it be done??
Sorry if this question has already been answered before but im not phone savvy...at all!!!
I have a Jamie Oliver appl that is 244MB, but in it i have downloaded 633 MB docs and data - but the only bit that itunes backup is the 244MB app,...is there any way i can save/backup the 633MB bit too so i don't have to download all the videos/recipe packs again (i know it wont cost to download them again, i just dont want to take up the time and use my downloads).
Any help would be appreciated...thanks, KirstDocument and Data backup ? - can it be done??
Sorry if this question has already been answered before but im not phone savvy...at all!!!
I have a Jamie Oliver appl that is 244MB, but in it i have downloaded 633 MB docs and data - but the only bit that itunes backup is the 244MB app,...is there any way i can save/backup the 633MB bit too so i don't have to download all the videos/recipe packs again (i know it wont cost to download them again, i just dont want to take up the time and use my downloads).
Any help would be appreciated...thanks, Kirst -
SSRS 2008 R2 is extremely slow. The query runs in less than a second in the dataset designer but if you try to view the report it takes over 10 minutes. I have read this is a bug in SSRS 2008 R2. We installed the most recent patches and
service packs. Nothing we've done so far has fixed it and I see that I'm not the only person with this problem. However I don't see any answers either.Hi Kim Sharp,
According to your description that when you view the report it is extremely slow in SSRS 2008 R2 but it is very fast when execute the query in dataset designer, right?
I have tested on my local environment and can‘t reproduce the issue. Obviously, it is the performance issue, rendering performance can be affected by a combination of factors that include hardware, number of concurrent users accessing reports, the amount
of data in a report, design of the report, and output format. If you have parameters in your report which contains many values in the list, the bad performance as you mentioned is an known issue on 2008 R2 and already have the hotfix:
http://support.microsoft.com/kb/2276203
Any issue after applying the update, I recommend you that submit a feedback at https://connect.microsoft.com/SQLServer/
If you don’t have, you can do some action to improve the performance when designing the report. Because how you create and update reports affects how fast the report renders.
Actually, the Report Server ExecutionLog2 view contains reports performance data. You could make use of below query to see where the report processing time is being spent:
After you determine whether the delay time is in data retrieval, report processing, or report rendering:
use ReportServer
SELECT TOP 10 ReportPath,parameters,
TimeDataRetrieval + TimeProcessing + TimeRendering as [total time],
TimeDataRetrieval, TimeProcessing, TimeRendering,
ByteCount, [RowCount],Source, AdditionalInfo
FROM ExecutionLog2
ORDER BY Timestart DESC
Use below methods to help troubleshoot issues according to the above query result :
Troubleshooting Reports: Report Performance
Besides this, you could also follow these articles for more information about this issue:
Report Server Catalog Best Practices
Performance, Snapshots, Caching (Reporting Services)
Similar thread for your reference:
SSRS slow
Any problem, please feel free to ask
Regards
Vicky Liu -
Require name and date before printing form
I have a 13 page PDF that a customer or our staff prints from our website. Often the customer or staff does not name and date each page of the form. Not having a name and date on each page of the form causes problems when they customer returns the form to the office, and the form pack gets divided for scanning into different areas of the customer file. 1) Is there an Adobe product that changes a PDF to require the downloader of the form to place a first and last name in the name field before printing. 2) Also, I would need a date stamp placed on the form when it prints. Is there I product that could help me program this PDF to do these 2 things? This post is the first time I can recall posting in this community. Any other suggestions are welcome. Thank you.
>> 1) Is there an Adobe product that changes a PDF to require the downloader of the form to place a first and last name in the name field before printing.
Many fields have a "Required" property. This is used when a form is submitted to a scripted web page for processing to throw an error message if any required fields are not completed.
One can use this property within a an action for a form to check if required fields are competed.
>> 2) Also, I would need a date stamp placed on the form when it prints.
I would add a form field that is filled in with the print date and time by some JavaScript in the Will Print action. -
Exporting Cross-Tab to Excel using RAS 9.0 - incorrect and data loss
Hello,
Hope somone can help to solve the following issue.
Develop a cross-tab report using Crystal Report Developer 9.0. service pack 5 or above.
(1). Viewing in Crystal Report - no problem - all rows and columns displayed correctly.
(2). Export to Excel using Crystal Report - no problem - all rows and columns exported correctly.
(3). Viewing in RAS 9.0 - no problem, all rows and columns displayed correctly.
(4). Export to Excel using RAS 9.0 - problem - only one or two rows with last rows are exported but wrong data. Most columns are not exported. Seems like exporting errors.
RAS 9.0 was patched with hotfix 200603 and service pack 5.
Please help or is there any hotfix or service pack that resolved this problem? As developer, we can use crystal report for exporting but for users, their only choice is through RAS.
Thank you very much!Please re-post if this is still an issue to the .NET Development - Crystal Reports Forum or purchase a case and have a dedicated support engineer work with you directly
-
I'm wondering, if I'm buying a smartphone (this one is a 3G smartphone) and don't want to use the internet or email on it for the first several months, can I just buy the $29.97/month data package at a later date in order to save money now? Or am I forced to buy the data package now with the phone in order to get the discount price listed for the phone?
I'm wondering because it says "data plan required" next to the phone. But what if you don't want internet or email right away?galaxyguy24 wrote:
I'm wondering, if I'm buying a smartphone (this one is a 3G smartphone) and don't want to use the internet or email on it for the first several months, can I just buy the $29.97/month data package at a later date in order to save money now? Or am I forced to buy the data package now with the phone in order to get the discount price listed for the phone?
I'm wondering because it says "data plan required" next to the phone. But what if you don't want internet or email right away?
you must get the data pack.
if you dont want it, dont get teh phone
if you buy the phone on ebay or someplace else, verizon will add the datapack when you activate the phone -
How can I cancel a data pack?
Now that Extra Data is available, you can no longer add or change your data pack, you can only remove it. You can remove your data pack via your mobile device, through My Account or by chatting to one of our agents online.
How to cancel your data pack from your mobile
Connect to My Plan Manager portal by typing telstra.com/mpm into your mobile's browser
Click on the 'My tab' at the top of the screen to see information on My Plan Manager
Select 'My Data Usage' then 'Data Packs' and select ‘cancel your Data Pack‘.
If you need any further assistance with your data pack you can chat with us online.
How to cancel your data pack via My Account
Log into My Account
Select Plans & usage for your mobile service
Select Buy add-ons then ‘Remove your data pack’
Once you cancel your Data Pack you will not be able to buy another one. If you need more data you can find out more about Extra Data.Re: How can I add, change or cancel a data pack?
This information says that you can downgrade your data pack online but you CANT!!! I do not want to spend hours watching my phone in order to have a 'chat'. I won't buy extra data in future if it is going to be this HARD! I will just turn my internet OFF! -
Just noticed that the $15/150 MB pack has been discontinued. It's been replaced by a $10/75 MB pack. In the data plan chart it says the $10 pack is for Feature Phones that require the data pack. But at the bottom it says that $10 or higher data plans are required for 3G Smartphones. So does this mean that one could get a Smartphone such as Blackberry and be able to use the $10/75 MB plan?
And on a side note the BB Bold isn't listed under Smartphones anymore (except for the CPO version)???derbyguy wrote:
Just noticed that the $15/150 MB pack has been discontinued. It's been replaced by a $10/75 MB pack. In the data plan chart it says the $10 pack is for Feature Phones that require the data pack. But at the bottom it says that $10 or higher data plans are required for 3G Smartphones. So does this mean that one could get a Smartphone such as Blackberry and be able to use the $10/75 MB plan?
And on a side note the BB Bold isn't listed under Smartphones anymore (except for the CPO version)???
I doubt that you can get this plan with a BB. I just tried downgrading my wife's $15/150MB plan to this new plan and wasn't able to do it. I suppose that I could try calling in, though. May try that, but I may be a bit too lazy to try that.
I was able to upgrade my daughters $9.99/25MB plan to the $10/75MB plan on her feature phone, though. She doesn't really come close to the 25MB, but it can't hurt to have a higher allowance at basically the same price, though.
If the Bold is not listed anymore, I would assume that it has been discontinued. Maybe a new model will be available soon? -
All of the smart phones say require data pack but does not clarify which data pack they all require. Can you get any data pack on any of the smart phones?
sterling11 wrote:
which phones require the 10 dollar one?
Thanks to community members for their helpful input. Adding to what was stated, you can select from any of the available data plans available based on the amount of data you wish to use. While the data plans start at $29.99 for 2 Gigabytes, you are free to choose a data plans that more closely match your intended usage. Here is a link for more information on our data plans and help on picking the data plan that best meets your individual needs.
The current featured phone we have available that device requires a data plan is the LG evN Touch. The $10.00 data plan has a 75 megabyte monthly allowance. The other basic phones have the option for selecting the pay as you go option of $1.99 per megabyte or selecting a data plan at the time of purchase. Here is another link to the basic phones we currently offer at our website. Just enter your zip code to be taken to the screen of the phone selection display. I hope this helps -
Difference Between Data Type and Data Object
Difference Between Data Type and Data Object
hi magesh
<u><b>Data types</b></u> can be divided into
elementary,
reference, and
complex types.
<u><b>Elementary Types</b></u>
Elementary types are the smallest indivisible unit of types. They can be grouped as those with fixed length and those with variable length.
<u><b>Fixed-Length Elementary Types</b></u>
There are eight predefined types in ABAP with fixed length:
<u><b>Four character types:</b></u>
Character (C),
Numeric character (N),
Date (D),
and Time (T).
<b>One hexadecimal type:</b>
Byte field (X).
<b>Three numeric types:</b>
Integer (I),
Floating-point number (F)
and Packed number (P).
<u><b>Variable-Length Elementary Types</b></u>
There are two predefined types in ABAP with variable length:
STRING for character strings
XSTRING for byte strings
Reference Types
<b>Reference types</b>
describe data objects that contain references (pointers) to other objects (data objects and objects in ABAP Objects).
<u><b>Data Types</b></u>
1) As well as occurring as attributes of a data object, data types can also be defined independently.
2)You can then use them later on in conjunction with a data object.
3) The definition of a user-defined data type is based on a <b>set of predefined elementary data types.</b>
4) You can define data types <b>either locally in the declaration part of a program</b> using the TYPESstatement) or <b>globally in the ABAP</b> Dictionary.
5) You can use your own data types to declare data objects or to check the types of parameters in generic operations.
<u><b>Data Objects</b></u>
1)<b>Data objects</b> are the physical units with which ABAP statements work at runtime.
2) The contents of a data object occupy memory space in the program.
3) <b>ABAP statements access these contents by addressing the name of the data object</b> and interpret them according to the data type..
4) For example, statements can write the contents of data objects in lists or in the database, they can pass them to and receive them from routines, they can change them by assigning new values, and they can compare them in logical expressions.
5) Each <b>ABAP data object has a set of technical attributes</b>, which are fully defined at all times when an ABAP program is running (field length, number of decimal places, and data type).
6) You <b>declare data objects</b> either <b>statically in the declaration part</b> of an ABAP program (the most important statement for this is DATA), or <b>dynamically at runtime</b> (for example, when you call procedures).
7) As well as fields in the memory area of the program, the program also treats literals like data objects.
hope this helps u,
reward points if useful
Ginni -
Differences between DATA TYPE and DATA OBJECTS
I am new to ABAP,I want to know the differences between DATA TYPE and DATA OBJECTS with some examples.
please help me regarding this.Hi Ashish,
Data Types: Are pure descriptions.
No memory is associated with data types.
Describes the technical properties of data objects.
EX.
1. C-CHARACTER
2. D-DATE
3. F-FLOAT
4. I-INTEGER
5. N-NUMERIC TEXT
6. T-TIME
7. P-PACKED NUMBER
8. X-HEXADECIMAL
9. STRING-Variable length string.
10. XSTRING-Variable length byte string.
Data Objects: Are created during runtime.
They cannot exist without the data Types.
Occupies memory space.
EX:
1. INTERNAL DATA OBJECT- Internal Data objects
LITEERAL- A literal has a fixed value.Ex: WRITE:u201DWORK HARDu201D.
VARIABLES: Data statement is used to create variables.
EX.DATA: NUM TYPE I.
NUM: VARIABLE defined by data statement.
EX: DATA: PRICE LIKE NUM.
CONSTANT-It is a data object, which contains a constant value throughout the program.
Can be declared in program by using CONSTANT statement.
EX:CONSTANT: INT TYPE I VALUE 15.
2. EXTERNAL DATA OBJECT: Are defined in tables i.e In ABAP/4 dictionary you can access this data from table.
EX: TABLES: SFLIGHT
DATA: SEATS LIKE SFLIGHT-SEATSMAX.
3. SYSTEM DEFINED DATA OBJECTS:Space & system variables like SY-UNAME,SY-DATUM, SY-REPID.
4. SPECIAL DATA OBJECTS:
PARAMETERS: Are Variables ,which can accept value from user.
SELECTION SCREEN : Are special internal tables to accept value ranges from user.
3 APPROACHES TO DEFINE DATA OBJECTS.
1. ELEMENTARY TYPES
DATA: Customer _Name (25) TYPE C,
Vendor_Name (25) TYPE C.
2. REFRENCE TO AN EXISTING FIELD:
DATA: Customer _Name2 (25) TYPE C,
Vendor_Name2 (25) LIKE Customer_Name2
3. REFRENCE TO NON-ELEMENTARY TYPE:
TYPES: T_NAME (25) TYPE C
DATA: CUSTOMER_NAME TYPE T_NAME
VENDOR_NAME TYPE T_NAME
4. RECORD-Information in rows & columns.
DATA: BEGIN OF BOOKING,
ID (4) TYPE C,
FLIGHT_DATE TYPE D,
NAME LIKE CUSTOMER_NAME,
END OF BOOKING.
You can also look into SAP help for more information.
Regards,
Indu. -
I want to tether my smart phone to my laptop and use it as a modem. My phone is prepaid. I have tested it with the 400mb that I get with my prepaid recharge and it works just fine. Can I add the 3gb data pack to my prepaid recharge? For some strange reason Telstra does not mention anywhere that I can find if these data packs are for prepaid, postpaid or both.
Thanks again Kalak. Yes, I have. I use prepaid for both phone and broadband. I am a full time house sitter. So I like to have plenty of phone credit just in case I need to contact the home owners or an emergency comes up. I just finished sitting a house where I got NO optus signal at all. It was a 3 month sit, so I simply changed to Telstra for my phone. The owners provided WIFI for internet. Most of the time I use very little phone credit. But I might use 2 $30 recharges in one month at other times...For example. I am booked for 9 months of next year, so I only need "just in case" credit. But I am not booked to sit a house for Nov to Feb, so come Oct the phone will get a hammering contacting home owners. I just had a 4 day gap between house sits. So I went to visit Mum who lives in the middle of Shellharbour City...Optus signal was dismal. So I used my phone as a modem and I was impressed with the Telstra signal and speed...BUT...the speed, signal and coverage does not justify the hefty price Telstra charges. Earlier this year a sat a house for people that drove half way round the country...From Vic to WA. They relied soley on Maccas for internet. The dozen or so times I needed to contact them by email was replied to within a day or two. So Telstra is not just competing with Optus and other telcos, but free WIFI suppliers like MacDonalds. When I came accross these data packs, I thought it was worth further consideration...But Telstra needs to be realistic and competative with the pricing because there are plenty of other options including FREE options. I am still very interested at looking further into these data packs or plus packs. But Telstra needs to be open and clear and so far they have not been...They want to sell me a product, but don't want to tell how the product works or how it is paid for nor tell me exactly what I will get for my money.
-
Prformance Pack and Diagnostic Pack Options with Oracle EE 10g, 11g
For advance performance tuning Oracle supplies performance pack and diagnostic pack. which costs thousands of $$$.
Is there a programmatic or system oriented way or a table in database that would tell me whether a particular site has this option installed in their Oracle EE installation or not?
Thanks,
Rs there a programmatic or system oriented way or a table in database that would tell me whether a particular site has this option installed in their Oracle EE installation or not?Its in the v$option view, following is the output of my 11201 db (EE) .
http://download.oracle.com/docs/cd/E11882_01/server.112/e17110/dynviews_2084.htm#REFRN30167
SQL> l
1* select * from V$option
SQL> /
PARAMETER VALUE
Partitioning TRUE
Objects TRUE
Real Application Clusters FALSE
Advanced replication TRUE
Bit-mapped indexes TRUE
Connection multiplexing TRUE
Connection pooling TRUE
Database queuing TRUE
Incremental backup and recovery TRUE
Instead-of triggers TRUE
Parallel backup and recovery TRUE
Parallel execution TRUE
Parallel load TRUE
Point-in-time tablespace recovery TRUE
Fine-grained access control TRUE
Proxy authentication/authorization TRUE
Change Data Capture TRUE
Plan Stability TRUE
Online Index Build TRUE
Coalesce Index TRUE
Managed Standby TRUE
Materialized view rewrite TRUE
Materialized view warehouse refresh TRUE
Database resource manager TRUE
Spatial TRUE
Automatic Storage Management FALSE
Export transportable tablespaces TRUE
Transparent Application Failover TRUE
Fast-Start Fault Recovery TRUE
Sample Scan TRUE
Duplexed backups TRUE
Java TRUE
OLAP Window Functions TRUE
Block Media Recovery TRUE
Fine-grained Auditing TRUE
Application Role TRUE
Enterprise User Security TRUE
Oracle Data Guard TRUE
Oracle Label Security FALSE
OLAP TRUE
Basic Compression TRUE
Join index TRUE
Trial Recovery TRUE
Data Mining TRUE
Online Redefinition TRUE
Streams Capture TRUE
File Mapping TRUE
Block Change Tracking TRUE
Flashback Table TRUE
Flashback Database TRUE
Transparent Data Encryption TRUE
Backup Encryption TRUE
Unused Block Compression TRUE
Oracle Database Vault FALSE
Result Cache TRUE
SQL Plan Management TRUE
SecureFiles Encryption TRUE
Real Application Testing TRUE
Flashback Data Archive TRUE
DICOM TRUE
Active Data Guard TRUE
Server Flash Cache TRUE
Advanced Compression TRUE
XStream TRUE
Deferred Segment Creation TRUE
65 rows selected.
SQL>HTH
Aman....
Maybe you are looking for
-
my iphone 4 wont connect to wifi. all of my other dvices will and there is no limit on devices. any anwers will help
-
TDS on Professional Fees as open item management account??
Hi, Can we create all TDS Payable accounts as Open Item Managed ?? if we dont create it as open item managed accounts what couldbe the problm?? pls guide me? shashi
-
R/3 to multiple BW systems?
Hello BW Experts, I have the sales order data to be extracted from the R/3 system to two BW system. 1) How to automate the process 2) I assume we have to run the extracts both BW1 and BW2 systems at the same time 3) Is there any best practices to han
-
Every time I try to get on youtube or netflix on safari all I'm getting is a white background and a lot of links and boxes with question marks in them, what is going on?
-
Last Skipped Date, Skip count, are not updated in any songs that i listen in my iPhone5s
I've been using smart playlist that's relays on the play count, last skipped date and skipped count fields... I have been using an old ipod to heard my music through this smart playlist that live updates all the time and it was working great. So my i