Wich is the best format to compress this for youtube?

hi...have this "problem" ...i did this video clip right?..shot in a panasonic p2....all the compositing work done in after effects ..and all that stuff...i render it all out in avi without compretion....looks great...( im a selfmade videoguy...) but i cant find the best way to compress this video clip for you tube....i mean...whem i compress this with encoder....in diferents ways ..and upload the video in youtube....loss quality...to much for me....any advice in how to make it looks good...will it be fine....(btw...i render all in avi in after effects..and them open all the video in premier..to give them they order...bad english..i dont know if you can get what in trying to say....please..help....a example here....
http://www.youtube.com/watch?v=xZzYScpvuWw

this are the setting i use to compress the video inencoder...is the way i know to do it...maybe that is wrong too...btw...one friend told that if i increase  the bitrate it will help...is that true??and if is...where i can do that???..in the settings of the encoder just see a limit of ten...ok..i hav the video in avi in premier ...them i clik make movie...and use this settings....any advice????thanks

Similar Messages

  • What is the best format and page weight for graphics?

    The Apple support adviser suggested that I ask this question here. I am creating a presentation that will be shown with varying kinds of monitors and projectors. I want to be sure that my graphics are clear and easy to read.
    How much does page weight matter? Graphics can be 72ppi, 150ppi, 300ppi, 600ppi, etc. Is there an optimal weight?
    The support adviser suggested saving images as .pdf files before inserting them into Keynote to avoid distortion, but he said that I should ask here just in case experienced Keynote users have other ideas.

    That is what happens when you change the size of an image.
    The best format for a logo is vector.  Then you can change its size, rotation, etc without any distortion or pixelation.
    If you are unable to go with a vector graphic, try to use several images of varying sizes and switch between them as needed to recreate the tween, or, try a PNG and hope the pixelation isn't too bad.

  • When using stream clip what is the best format to convert to for editing...

    On FCE? Many thanks!

    This is what you need to use if you want to edit video in FCE without having to constantly render.
    Within the Apple Intermediate Codec selection there are parameters you can set (frame size, frame rate and a few other things) ... but these do not normally need to be tweaked because in most cases MPEG Streamclip is smart enough to detect the nature of your source video file(s) and select the appropriate settings for you.
    The point is, if you're not capturing video directly from a DV, HDV or AVCHD camcorder, then you need to convert your video as above if you want to edit it in FCE with minimum issues.

  • What is the best format to import images into iBA? How should I compress my images before importing? What is the best file format? PNG? Jpeg?

    What is the best format to import images into iBA? How should I compress my images before importing? What is the best file format? PNG? Jpeg? I'm trying to figure out the best file format / compression for importing images into iBA. Also, does anyone know how iBA will compress the file? Are the assets attached (like a website) or flattened out? Does anyone know how iBA handles this? Many many thanks to anyone with insight into this.

    This question is largely answered by the following thread...
    https://discussions.apple.com/message/17805700#17805700

  • I have a external Hard drive of 1TB. I want to transfer HD movies to it from my MAC but it can only take 4 gb at a time, now i have to format it which is the best format in this situation NTFS or exFAT, as i use windows part ion as well??

    I have a external Hard drive of 1TB. I want to transfer HD movies to it from my MAC but it can only take 4 gb at a time, now i have to format it which is the best format in this situation NTFS or exFAT, as i use windows part ion as well?? plzz help
    Merry Christmas

    Repartition and format the drive for a Mac:
    Drive Preparation
    1. Open Disk Utility in your Utilities folder.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.

  • My Macbook pro was stolen 09/12, the police just returned it to me. I want to remove all the data and start over. Format the drive's etc. I have windows 7 on 1 partion and mountain lion OSX on the apple partition. How is the best way to do this?

    My Macbook pro was stolen 09/12, the police just returned it to me. I want to remove all the data and start over. Format the drive's etc. I have windows 7 on 1 partion and mountain lion OSX on the apple partition. How is the best way to do this?

    Have a look here...
    what-to-do-when-your-hard-drive-is-full.html

  • The BEST format to use with iDVD is .DV video from QT Pro ?

    The BEST format to use with iDVD is .DV video from QT Pro ?
    Hi Jon
    If you remember my video (640x480) NTSC in iMovie Project.
    Someone told me that exporting movie to DV video QT from iMovie share option, for burning in iDVD, is the best quality possible.
    Is this true ?
    If so what are the parameters ? Again is for seeing in a widescreen TV

    Someone told me that exporting movie to DV video QT from iMovie share option, for burning in iDVD, is the best quality possible.... Is this true ?
    As usual, this is really a matter of individual opinion. I personally prefer the Apple Intermediate Codec (AIC). It is newer codec specifically designed for use as an "intermediate" editing compression format. It is slightly more efficient than DV-25 (18-20 Mbps for audio + video vs. 28.5 Mbps) and is less restrictive (i.e.,the user has more control over certain settings). On the other hand, the very nature of having a highly standardized (few user option) compression format does appeal to many users since there are fewer things the user can mess up.
    If so what are the parameters ? Again is for seeing in a widescreen TV
    Bit rate, frame rate, and encoding dimensions are part of the standard and do not have user parameters as such other than selecting the NTSC or PAL standard. With regard to the aspect ratio, you simply select which you want to use—4:3 or 16:9. However, as I've previously mentioned, it is possible to distort your output by either entering the wrong aspect or to actually "lose" the embedded flag/value in some work flows. (I.e., a 4:3 aspect movie displayed at 16:9 makes the people an objects appear short and fat while encoding a 16:9 aspect movie as 4:3 will make them look tall and skinny.) Movies should always be encoded in their original aspect ratio since any modern digital TV will allow the user to disport—i.e., force a 4:3 file to fully fill a 16:9 display screen. In fact, some will even allow you to spread the distortion evenly across your screen or to the spread it proportionally. (On my set these features are called "H-Fill" and "Justify" respectively.) If you were to use the AIC video compression format rather than DV, then you would have to manually enter the display dimensions for the "standard" and/or "definition" format you are targeting.

  • The best format for output

    Hi All,
    working in animation project to be broadcasted on a TV channel as HD1080 50i,
    1- all the animation layers was rendered from TOONBOOM as .SWF to keep it in vector for compositing issue.
    Dose SWF lose any quality? we always use TGA sequence with alpha in our past SD projects but now we found SWF is a smaller file size and allows zooming Because it keeps all vector lines.
    2- compositing each scene in after effects cs6 and then render them.
    What is the best format for output to deal with premiere cs6 as a real time playback ( my editing pc includes gtx680 4gb., many HGST 3tb with raid controller,64g ram, aja kona 3g) so do I go with TGA sequence (I think it will destroy the raid Because of the large number of small-sized files in read and write ) or MOV uncompressed (I'm afraid of the space size and don’t know it will play in real time ) or what is the best compressed format Maintaining video image quality as its now will be my only master source?
    Many thanks,
    sherif

    Thanks Rick for your reply,
    Regarding the SWF i moved to flash pro forums and they are supporting me now,
    My system is a pc, win.64, I7-3930K, 64G RAM, EVGA GTX680 4G, Many HGST 3TB with raid controler,
    Some advised me to go with Quicktime Prores HQ or DNXHD or DPX ,
    In this year project my client's requirement for delivery is :
    DNxHD 120 Codec, wrapped with QuickTime rapper, which means a file with MOV extension and the codec used is DNxHD 120 ( 1080@50i HD)
    So do i work with dnxhd 120 from the beginning to the delivery? (and it will be my only master source) or another format encode it at the end to dnxhd 120? ( i will distribut this project to many channels after the first run exclusivity period end with different requirements).
    Thanks,
    Sherif

  • What is the best format to use on an external hard drive so I can both back up my Macbook Pro and also put movies on it from another hard drive (PC)?

    I am looking for a solution to whether if it is best to get two hard drives or one that can do two things that I want.
    I am looking for a hard drive format that can both back up my 500GB Macbook Pro but I was also wondering if I could also put movies on it from another hard drive that is PC based. Would partitioning the hard drive work for this? I don't know what are the best formats to use.
    If this is too hard it might just be easier having a separate 500GB hard drive for back up of my Mac and another bigger hard drive for the movies etc (the files are probably bigger than 4GB). Any help would be greatly appreciated as I need to make a decision soon!

    Csound1 wrote:
    Microsoft has not released the official exFAT file system specification, and a restrictive license from Microsoft is required in order to make and distribute exFAT implementations. Microsoft also asserts patents on exFAT which make it impossible to re-implement its functionality in a compatible way without violating a large percentage of them.[13] This renders the implementation, distribution, and use of exFAT as a part of free or open-source operating systems or of commercial software, for which the vendors could not obtain a license from Microsoft, not only technically difficult, but legally impossible in countries that recognize United States software patents.
    Can't help with that, if one is using a Windows machine then they are subjected to their rules and control.
    Limited support outside Windows and Mac OS X operating systems as of 2012, when most consumer electronic devices could only handleFAT12/FAT16/FAT32, rendering exFAT (and flash memory formats using it) impractical as a universal exchange format.
    The OP said they plan to store movies on the external drive.
    Many movies today are well over 4GB in size, thus exFAT has to be used and formatted on the PC, which the Mac can then read.
    Older Windows NT versions up to Windows Vista without Service Pack 1 do not support exFAT.
    Irrelevant, Microsoft provides a free download of exFAT for Windows XP, and Vista shouldn't be running on pre SP1 anyway.
    Some distributions of Linux have begun to include support for exFAT. It is however, only available as a file system in user space, as it's not supported by the kernel.
    Irrelevant, OP is using Windows and OS X, not Linux and if they did Linux can read the files at least and transfer, which is all they care about really.
    Windows Vista is unable to use exFAT drives for ReadyBoost. Windows 7 removes this limitation, enabling ReadyBoost caches larger than 4 GiB.[14]
    Irrelevant, the OP's is intending to use it as transfer drive between Mac's and Windows for movies.
    The standard exFAT implementation only uses a single file allocation table and free space map. FAT file systems instead used alternating tables, as this allowed recovery of the file system if the media was ejected during a write (which occurs frequently in practice with removable media). The optional TexFAT component adds support for additional backup tables and maps, but may not be supported.
    Some relevancy, but only exFAT can handle 4GB+ files between Mac's and PC's, so the need outweighs the possible problem.
    The OP needs to follow the standard Windows practice of "safely removing hardware" before physically disconnecting the external drive. If a write is occurring, it won't allow disconnecting until the write is finished.
    Support for up to 2,796,202 files per subdirectory only.[1][nb 3] Microsoft documents a limit of 65,534 files per sub-directory for their FAT32 implementation, but other operating systems have no special limit for the number of files in a FAT32 directory. FAT32 implementations in other operating systems allow an unlimited number of files up to the number of available clusters (that is, up to 268,304,373 files on volumes without long filenames).[nb 4]
    Not a issue, only in extreme cases of a lot of small files. The OP plans to use it for movies which are usually large and take up a lot of space on the drive.
    IMMO It looks like you just ran off and copied something to argue your point when all the points are basically irrelevant.
    There is only one format that can easily share 4GB sized files between Mac's and PC's without further complications.
    It's ALSO possible to install MacDrive on the PC and format the drive on the Mac HFS+, but I didn't recommend that because I know it's a hassle just like third party NTFS writing software is a hassle on Mac's.
    If you so anti-Microsoft format, then you must know Paragon has to pay a license fee to Microsoft for using the NTFS format.
    At least with exFAT there is no fee to Redmond, at least not yet.

  • What is the best way of compressing a large 3 hour final cut file

    What is the best way of compressing a large 3 hour final cut file. I shot the play and it is in final cut and I rndered it so now I have a 22gb file that I need to put on a dvd . Any suggestions
    Thanks
    Macbook Pro
    2.3 GHz Intel Core i7
    with Final Cut Pro 7.0.3
    using Lion as operating system

    Presuming your menus aren't complicated(include audio or video) the total size for the MPG-2 and AC3 files should probably be under 8GB for a dual layer disk. The inspector will tell you the estimated size. 2-pass varible bit rate would be recommended.
    Trying to fit 3 hours on a DVD-5 will only bring very noticable quality hits. Compressor will let you change the average bit rate so that you can fit 174 minutes but trade-off isn't worth it in my opinion.
    Be aware that dual-layer -R and +R media may not play well for everyone everywhere.
    I presume you are not making 1000 or more copies? If you were replication could solve this.
    One other alternative would be to break-up the show into two parts and spread it across two DVD-5s.

  • What is the best way to compress a song?

    What is the best way to compress a song to bring it into IMOVIE?

    I assume you are referring to compressing the file size of the resultant song, rather than compressing the audio dynamic range of the tracks in the song.
    GarageBand only outputs .AIFF files which are uncompressed 16-bit, 44.1KHz stereo audio.
    As far as I know, there is no point in compressing the GarageBand song before importing it into iMovie, because iMovie uses the same format for audio internally as GarageBand does.
    You can open a GarageBand song in iTunes and use iTunes to convert it to an MP3, but when you import that MP3 into iMovie it's going to up-sample the MP3 back into AIFF format anyway.

  • What's the best format to import in to iMovie?

    Okay, here is the situation, I have a lengthy Keynote presentation which I plan to export via QuickTime so it can be imported in to iMovie in order to do voice-overs. The question I have is what the best format is to use to export from Keynote in order to import in to iMovie. I am obviously looking for the format which is the smoothest, doesn't lose any quality, and will look clear once imported in to iMovie. Also, there is no reason to use H.264 since size during the transfer doesn't really matter to me, besides, H.264 seems to be somewhat jerky with Keynote exports (or maybe it's just my computer) as I am using some of the graphics intensive transitions and effects.
    Also, I know that when you send movies directly from Keynote to iDVD or from iMovie to iDVD, it uses a format which is directly compatible and there is no conversion that takes place, is there a format which will work this way from Keynote to iMovie or does it always have to do the conversion.
    Finally, the other thing you should know is that I created the presentation in Keynote using 1280x720 in order to achieve the true widescreen aspect ratio. Now, I am NOT looking to keep this in HD, once I import it in to iMovie, I only need the standard DV Widescreen resolution since I will eventually transfer it to iDVD to burn it as a widescreen DVD. So, I would also appreciate some sort of input as to whether I should export the QuickTime file out of Keynote as the full 1280x720 and then let iMovie do the down-sampling, or should I export it directly out of Keynote using the standard definition widescreen resolution? Please, I would appreciate ANY help on this!!!

    Thanks for your suggestion Bruce, however I found another way as well. I finally found that using the full resolution (1280x720) with Apple Intermediate Codec @ 60FPS turns the best results (for a relatively low disk usage). I finally went with the 60 frames per second because I was having problems getting a somewhat jerky output using Current or 30FPS in any format. I realize that iDVD reduces the FPS eventually, but it seems to be perfect when I take that route. Although the jerkiness isn't noticeable on most effects and transitions, if you use the newer transitions like Reflection or Doorway, you will definitely notice a less than perfect playback.
    I know that I said that file size didn't matter, but I decided using uncompressed video was just too large, I think the file size was like 25-50GB or something like that. I took forever to import in to iMovie, so I quit with that route.
    I really appreciate the Garageband suggestion, that was by far the best way to go. I never really tried using the new GarageBand in iLife '06 so I didn't even realize that it had movie scoring—what a GREAT feature! I definitely should have recorded directly in to GarageBand rather than in iMovie, something is just not right with iMovie's audio handling. Anyway, thanks for the help!

  • What is the best way to do this.... (put extracted text in a certain way)

    Hi all inDesigners.. i have a i hope simple question...
    Lets say i have a DB with category of ads's for instance Cars..   and we have ca1-add,car2-add and so on.. in the db...
    so i want to c what is the best format to export the db so i can import it in in design to look like these attachments below.
    the first pic you have the category name i guess this ill do all manually... with the color coding that's all ok but if you notice
    basically you have 4 columns , that contain normal ads yellow background ads and banners... so my question is what is the best format to export so i get add1 and then a separator line under add2 and a separator line under.. and so on..
    and is there something like this functionality..
    any line that begins with the phrase for instance Yellow_add make the add txt frame yellow so it will look like in the attached jpg?
    is the idea to make the ads like 160 char limited and do an export for each add 160 char (fill in the blanks) and make in inDesign equal space lines so when i paste the txt it will take the shape like in the jpg's?
    thanks.

    Come onnnn!!!
    in one pint i was thinking you are kidding with your explanation!!!
    really!
    I am very grateful for your long and very detailed explanation and instructions but this is all impossible we are talking about a 300 page add paper 1
    2 i have a database and i have a team of programmers that can customize the output as i want of course i guess they can not make it inDesign friendly but as i said
    they can program the output when exporting the yellow adds to format it in a certain way, so i am trying to SEE (c) is there a way (for me logically it has to be) to make a rule as i said make the background between ##> and <## ...
    it is soo simple !!!  like the programmers will export the Database for me like..
    add1
    add2
    ##> add3 <##
    add4
    And in design should take care of the rest..
    Rule 1 , will make it look like
    add1
    add2
    and rule 2 (if inDesign was made by smart enough people )
    add2
    Add3these Adobe guys are funny when i write the mesage the table background is yellow but when i post it it will become transparent very nice Adobe
    add4
    See for me it is impossible to do it manually or it is like very time consuming... imagine i can ask the programmers to output it(the yellow ads)in any way i want.. What would be the best solution?

  • Editor here, what's the best format to use for iMovie?

    Hi all.  I edit professionally, using Final Cut among other products.  I haven't touched iMovie since...I can't remember when.
    We have a client who is going to be using some of our footage for a project they will be editing themselves, using some version (unknown at present) of iMovie.
    Assuming their computer is new, and they have a fairly current version of iMovie HD, what's the best format to transcode our original files to?  I could always default to DV anamorphic, but would rather give them HD files.
    Thanks for your help.

    If they have a current Mac and are on iMovie 11 (current) or iMovie 8 or 9, give them Apple Intermediate Codec.
    This works well for HD files.
    Other formats that would work: Motion JPEG-A, Apple Animation Codec, h.264, DV, HDV.
    ProRes 422 will only work in iMovie if your client has Final Cut Pro installed on the same machine (and thus has the necessary components).

  • What is the best format and size for a logo in a flash project?

    I have this flash project in which i animate a logo from big to small, the logo in the big state looks pretty good but when the flash movie reduces the image the logo tends to pixelate(i dont know if this term is correct).
    Thanks,

    That is what happens when you change the size of an image.
    The best format for a logo is vector.  Then you can change its size, rotation, etc without any distortion or pixelation.
    If you are unable to go with a vector graphic, try to use several images of varying sizes and switch between them as needed to recreate the tween, or, try a PNG and hope the pixelation isn't too bad.

Maybe you are looking for