Wide table in two pages

Hello!
Can anyone help with this problem:
There is a wide table, that can't fit in one page A4. I want to print it like this:
*Page. 1*
Material     Column-1    Column-2   Column-3
1. table     0,0001         -------------   -------------
2. chair     0,0022         ------------- --------------
*Page. 2* - this is extension for rows 1 and 2
Material     Column-4    Column-5   Column-6
1. table     0,0001         -------------   -------------
2. chair     0,0022         ------------- --------------
*Page. 3* ... this is other rows
Material     Column-1    Column-2   Column-3
1. dog      0,0001         -------------   -------------
2. cat        0,0022         ------------- --------------
Page. 4 and so on....
How to do so in Adobe PDF printing? May be it's more easy to make it in Smartforms?
Thanks!

Hi Kolrnikov,
I think it is not much difficult to get this done. Please try the following.
1) Make different tables with required no: of columns.
2) Give individual data binding to the cells corresponding to different columns
3) Use javascript to replicate material column in all tables
Thanks & Regards,
Sanoosh

Similar Messages

How do I split a table over two pages in Pages?

Hi
I'm trying to split a table in Pages so that the text in the two adjacent rows will fall on two separate pages but I cannot find a way to do this. This was something that is easy to do if using MS Word so I can't believe it would be a feature missing from Pages?
The document I'm working with is my resume and I had my jobs nicely formatted in a long table so it was easy to work with (job title, dates, achievements etc. in different cells). Since updating to Yosemite and Pages 5.5 I've noticed that I now have my career summary and 'Professional Experience' title on the first page but the table with all my job information is now starting on the second page - leaving just a lot of blank space on the first page. One of the jobs on the second page now also splits across pages 2 and 3. I can see that it is trying to keep everything in the table together and that what I need to do is just split the table at a certain point so that I can put the first part of the table back onto page 1 and the second part of it on page 2 - but it won't give me any option to do this.
Any ideas?

Although this thread is several months old, I felt compelled to reply as I have just encountered this gaping hole in Pages functionality. Jerrold Green 1 is incorrect in asserting that the OP's problem is that Pages won't split a cell across pages. The OP clearly indicates that Pages is not moving rows that won't fit on the first page of the table, but rather it moves the whole table to the next page.
So for example, if I have a paragraph of text at the top of page 1, and then insert a table under this paragraph that contains more rows than will fit on the remainder of the page, rather than the rows that won't fit being moved to page 2, Pages moves the entire table to page 2 leaving a big blank space on page 1. But bizarrely if the table contains more rows than will fit on one whole page, then it will move the overflow rows onto the third page, making you wonder why it didn't just do this on page 1.
This is with the table arrangement set to Move with Text. If I set it to Stay on Page, the end of the table just flows over the footer and off the page into oblivion. If I set Text Wrap to None, it just plonks the table right on top of the other text. So it gives you the option to do something silly, but not the most sensible option.
If I am missing something, then can someone please correct me. Without this basic functionality Pages cannot be considered a professional Word Processor. I'll unfortunately have to go back to MS Word.

How do I extend one line of a table to two pages?

I have the problem, that I want a lot of text in one line of the table. Since I have a lot of long and in between short lines, I get a lot of free space on my print-outs as the lines with a lot of text are all put on the next page. And the maximum size of one line is one page. I know from MSword that the lines can be carried to the next page. Is that possible with pages, too?
I'd love to hear an answer!
Thanks,
Lukas

You split the line into two .
As it was explained here a lot of times, a row is an object which isn't allowed to cross pages boundaries.
Yvan KOENIG (VALLAURIS, France) jeudi 28 avril 2011 15:20:35

Same table content in two page...

Hi frends in Adobe forms i have two body page..i want to display same table in two page....while iam trying this issue...
i got table content displayed in one page but in the second page table content is not displaying..i think i have some problem in binding...help me out......

Hi Dinesh,
If u r binding the data to the table in the first page, u can not bind that data again to the other table. Because u can bind the data only once. Next time it ll be empty.
For this u should hv two table in ur context.. eg: *table1* (1:n) and *table2* (1:n) with same attributes.
Then in the code *fetch the data -> set attributes -> bind with table1 node*..
then, set_attrubutes for table2 -> bind table2
Regards,
*Surya*
Edited by: Surya PK on Oct 2, 2009 4:21 AM

Table positioning in Pages 5.5

Hello,
In the new pages 5.5, Apple apparently changed the way tables are distributed in multiples pages. You can't distribute a table between two pages as before. Someone knows how to solve the problem? I need a table that continues from the end of one page to the beginning of another.
Thanks.

Hello,
I'm having the same problem. The only way to break a table is removing the paragraph between it and the text, but it has some collateral effects when you're working with justified text.
I hope they can fix this problem soon!
Thanks!

How to stop table row from being split onto two pages

How do I stop a row of output from being split between two
pages. When the CFDocument loads, sometimes, the last row on a page
"spills" over onto the next. I'd like to figure out who to prevent
these "orphans" from happening, and force the row onto one page or
the other.
Here's my code for the doc... I have a sp that querys the sql
db. Using CFDocument - CF Version 7.02

If you know roughly how many lines of output will fit on a
page (you can test to find out), then you can count result lines
(you should be able to use RecordCount and do some math) and cfif
against your counter and force a page break beforehand if the next
table will be too much to fit on the page. Then just reset the
counter after you page break.

Split a Table of Contents on two pages

Hi everyone!
I would like to split a Table of Contents on two pages after my own wishes. Is it possible? I know that the TOC can be styled but make it split over 2 pages seems impossible. Does anyone have an idea? Thank you for any input!!!

Thanks for the feedback.
It's not my idea.
It's a variant of what Apple explains in the technote:
http://support.apple.com/kb/TS2127
Symptoms
+When you create a document in Pages, you can add page numbers to your pages, and even choose a numbering format (such as 1, 2, 3; A, B, C; or I, II, III). If you create a table of contents (TOC) for your document, the TOC will always display page numbers as Arabic numerals (1, 2, 3), even if you selected a different format for your page numbers (such as if you chose the letter scheme A, B, C).+
+If your page numbers are not Arabic numerals, your document may be difficult to navigate since the TOC and page numbers won't match. As a general rule, you should use Arabic numerals to number your pages if you plan on including a TOC so that the TOC will reference page numbers correctly.+
Resolution
+If you've used a different numbering format, you can edit your TOC using this workaround:+
_+Export your document as an RTF (Rich Text Format) document (from the File menu, choose Export, then select the RTF radio button in the resulting dialog).+_
_+Open the RTF in Pages (from the File menu, choose Open or drag the RTF file onto the Pages icon in the Dock).+_
_+Manually change the numbers in the Table of Contents section so that they match your page number scheme.+_
_+Please note that some of your formatting may change during this process and may need to be corrected.+_
Yvan KOENIG (from FRANCE jeudi 12 mars 2009 20:44:24)

How to: Print table on first page, use second page (back) for text only

Hi, I am looking for a clear document on how to use pagination and the Odd and Even pages.
We need to print a table over several pages, but only on Odd pages.
On the back of each page we need to print "Terms and Conditions". Is that possible? Can it be done without scripting
We are on ADOBE version 8.1
In the file properties, double sided is switched on, and version set to 8.1 and higher.
I created two Master pages, a FrontPage with ContentArea1and a BackPage with ContentArea2.
FrontPage is used for uneven pages, BackPage is used for the even pages. The masterpages are printed correctly (alternating properly).
Two pages were created for the content area's:
ITEMS: contains item data (table with header and footer). Place is "On Odd Page". After "Goto page BackPage". And if the table needs to be paginated it goes to BackPage with overflow leader "Conditions".
CONDITIONS: contains a textfield (Terms and Conditions). Place is "On Even Page". After "Goto page FrontPage". No overflow.
What should happen is that on the front pages the item table is printed. If there are too many lines it should overflow to page number 3 then 5 etc. All the even pages should display the text.
What actually happens is that the item table also gets printed in the content area for the Condition text...
Also the "Conditions" are not printed on the last back page. But only once before it...
Cheers,
Edwin.

Fixed it... After a lot of creating, deleting, playing around with pagination and the inevitable cursing...
I have created 5 pages:
1. FirstPage
     - Odd/Even: Odd (Front) Pages
     - Placement: First page (In page set)
2. FrontPage (For Odd pages)
     - Odd/Even: Odd/Front Pages
     - Placement: Rest of Pages
3. BackPage (For Even pages)
     - Odd/Even: Even (Back) Pages
     - Placement: Rest of Pages
4. LastPage
     - Odd/Even: No Odd/Even Restrictions
     - Placement: Last page (In page set)
5. DummyPage
     - Odd/Even: Blank pages
The 'Terms and conditions' are located on the BackPage and LastPage (as a text).
The table that is printed is (of course) located on a normal page (flowed subform).
Pagination tab: Placement = Following previous, and After = "Continue filling parent". No overflow... Basically, it's all default.
The table lines will now start on the first page and if there are more lines than can be printed on this page, it will continue in the next content area. That will be on the FrontPage.
The trick is that each master page must have a content area (mandatory). Except for Blank pages, but these cannot be used... Blank pages would only be used once, after the first page.
What I discovered is that you can drag a content area away from the Master page and attach it to a different master page.
Logically, if there is no content area on a page, then data cannot be printed there. So, I created a Dummypage. On this page I dumped the content areas from the LastPage and the BackPage. As a result, content cannot be printed anymore on the back of pages. Only the standard text (a text field) is printed there. When the data from the table is overflowing, it will automatically overflow from the FirstPage to the next content area. Which is located on the FrontPages only.
The DummyPage is NOT used anywhere.
The result is that the records can only be printed on the content areas that exist on the First and Front pages. The back pages are now skipped.
Duplex printing is now working correctly, and the text is printed on the back of all the pages.
Cheers,
Edwin.

How do I run a table over multiple pages?

Hi I write TV scripts using a simple two column table which can be many rows long - how can I get Pages to automatically run the table over multiple pages whilst still allowing me to cut and paste and rearrange the script? This is simple in Word and must work in pages but I can't work out how to get it to work. I've tried looking at the Page Break feature but it won't come up from the table?
many thanks

At this time, There is no way to drive tables in Pages with AppleScript.
Do your job in Numbers which allow that.
Yvan KOENIG (from FRANCE vendredi 6 février 2009 13:54:35)

How to display two pages at a time in smartform

Hi folks,
I have requirement that i need to display two pages for each record of the output table . the page 1 is not simillar to page 2 . page1 contains few templates and page2 contains other templates not simillar to first one.
my case, it displays only the first page eventhough i tried using command line.
Is there any exact step to followed to over come this problem.
Please suggest the solution.
Thanks ,
Hemum.

hi,
can u please tell me how and where u are looping throuhg the internal table
check that.
regards,
Ravi Valluri

Insert data into table from JSP page using Entity Beans(EJB 3.0)

I want to insert data into a database table from JSP page using Entity Beans(EJB 3.0).
1. I have a table 'FRIENDS', (in Oracle 10g database).
2. It has two columns, 'NAME' and 'CITY'. Both have datatype strings(varchar2).
3. Now from a JSP page, having two textfields, 'NAME' and 'CITY', I want to insert data into table 'FRIENDS'.
4. In between JSP and database is a Entity Bean(EJB 3.0) and a stateless session bean.
5. I am using JDev as editor.
Please provide me code ASAP or link with similar example.
Thank you.
Anurag

Hi,
I am also trying that scenario. So u can
Post the jsp form data to a Servlet which will act as a Controller.
In the servlet invoke the business method.
Similar kind of app is in www.roseindia.net
Hope this would help u.
Meanwhile if u get any optimal solution, pls post it.
Thanks,
Happy Java Coding.

How do i print a table on odd pages leaving the same space in the even page

Hi,
I have created an RTF for Invoice Printing and the invoice will be physically printed (hard copy using printer) on both sides of the paper.
I now have a table/section to be printed only on the first page and the second page should be printed without this header (the header should be displayed as space).
How do i use even and odd page printing for this? I can send you the xml file and rtf file, could you please help me to achieve this?
Thanks,
Kesava

Guessing here
In the RTF the first page has whatever you were going to put on it.
On the second page you put your invoice format/field codes etc.
I am assuming you are using a for-each at the begining of each invoice?
If the invoice is fixed length, then make the invoice two pages long before you finish the first for-each group.
for-each
page of invoice + blank page
page break
end for-each
Headers and footers might get in the way.

Using VO as form and table on same page

Hi,
We are facing some issues while using same view object on one page. The view object is dropped as input form and as table on same page. There are few fields in the input form that have autosubmit property set to true. Now while entering the data into form, after clicking any autosubmit field, if we refresh the page, then new row gets created in table with value of the auto submit field. This is in cache only and not created in DB. We tried by exposing two instances of same view object in application module but still same issue. Finally we created two view object, one which is EO based and another ready only through query. Its working fine now. But is there any other possible solution, without creating two view objects?
Jdev: 11.1.1.6.
Thanks

Hey Ami,
I've tried understanding your problem but i'm not sure if i could.
The problem is that you can insert via the form but it doesn't update the table ?
Is that it ?
Regards,
Frederico.

Two page view in Reader X

I upgraded to Adobe Reader X and cannot find the two page view, which I find very useful especially in the wide screens we have nowadays.
Anybody knows where it has gone?
thanks

ok, I found it, don't know how I missed this before...

How do I Hide a Row in a Table in a Pages document?

How do I hide a row or column? There is a command to "unhide" but not to hide. Because I cannot hide anything, the unhide command is greyed out - what did Apple do with the Hide Rows command for Tables in Pages? Hide it? lol!
It does not show up in a search of Help - in fact, there isn't even a mention of "unhide" despite there being a command for it!
Why do I want to hide a row? Because if I have an 8 row table in a Pages Template and I only need six of them, deleting the other two breaks all the formulae and inserts #Ref! errors across each formula, rather than automatically altering cell references as other spreadsheets do. In Numbers hiding the cells makes them disappear and does not break the formulae, but this behaviour seems to be missing from Pages.
Or is it me that has missed somethng?

I thought that the descriptions given in the Help are clear.
The ADDRESS function constructs a cell address string from separate row, column, and table identifiers.
ADDRESS(row, column, [type], [style], [table])
row: The row number of the address.
column: The column number of the address.
I dropped the comments about type, style and table as I don't use them here.
=IF(ISBLANK(INDIRECT(ADDRESS(ROW(),1))),"",INDIRECT(ADDRESS(ROW(),2))*INDIRECT(A DDRESS(ROW(),3)))
INDIRECT(ADDRESS(ROW(),1))
returns the contents of the cell whose row is the same than the one containing the formula \[the row number is given by ROW()] and whose column is the 1st one)
INDIRECT(ADDRESS(ROW(),2))
returns the contents of the cell whose row is the same than the one containing the formula \[the row number is given by ROW()] and whose column is the 2nd one)
INDIRECT(ADDRESS(ROW(),3))
returns the contents of the cell whose row is the same than the one containing the formula \[the row number is given by ROW()] and whose column is the 3rd one)
In short, when the formula is applied in row 9 it behaves like:
=IF(ISBLANK(A9),"",B9*C9)
The long syntax is required to be able to enter it only once in the header cell as described in the Help and in the PDF User Guide in a chapter entitled "Applying a Formula Once to Cells in a Column or Row".
As we want to use such a formula, it would be odd to destroy its ability using a different formula in a standard bottom row.
More, in a footer row, we may use shorter formulas than in other rows.
In a standard row 10 we would have to write =SUM(D2:D9)
in a footer row we enter only =SUM(D) which add the contents of every standard cells of the column D.
This feature is also described in the named resources.
Yvan KOENIG (from FRANCE vendredi 3 octobre 2008 18:21:13)

Wide table in two pages

Similar Messages

Maybe you are looking for