Widget for Logged On Users

Is there a widget that will let one determine the users (IP or name) that are logged onto your machine, say for example, remotely? IS there there some other way of doing this?
Thanks. Paulo.

sm04-shows the logged on users of current server.
AL08-shows logged on users of all servers in the network.
Even you can access this from SM51 and selecting the server on which you want to see logged on users and hit user processes tab.
mark as answered if it solved the problem and reward points for the same.

Similar Messages

View RSOP data for logged on user that is not administrator

When troubleshooting group policies I use GPResult and RSOP.msc a LOT! Since we started deploying Windows 7 I've been having the worst time trying to use these utilities.
Normally when a user is not getting policies I can just run rsop.msc and see if there is any error information as well as which policies have and have not applied. In Windows 7 I am prompted for an Admin password when I run rsop. Well that would
be fine but now RSOP attempts to gather data for the administrator; I need to see the data for the logged on user. The only way I've been able to work around this so far is to add the user to the local admin group then I can run rsop and gpresult. When
I'm done I have to remove them from the admin group.
This seems silly to me. Can anyone tell me how to see RSOP and GPResult data as the USER instead of the Admin.
Also please do not chime in telling me to run rsop in planning mode as that only tells me what is supposed to happen, not what is actually happening on the system.

Hi,
Base on my test and research, there’s impossible to use RSOP.msc with user, and run as administrator when you login with user still doesn’t work.
That’s necessary to login with administrator and run rsop.msc. It’s a by design feature.
Thank you for your understanding.
Regards,
Leo
Huang
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Template creation for logged in user

Is there a variable or other means to auto check the 'Document and Settings\<current logged in users>\My Documents'
I can not find how to auto check the box for the current logged in user. It's not in the template editor.
Also searching returned dead end posts...
http://forums.novell.com/novell-prod...shortcuts.html
http://forums.novell.com/novell-prod...s-folders.html
http://forums.novell.com/novell-prod...ing-admin.html
Anyone have experience with this?

myfirelight,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

[Server 2008R2] Filter event logs for logged in users from clients on domain

Hi All,
I am looking for a script which can be run on a domain controller to check which user accounts logged in on the domain. I am looking for both the username and client. Reason why I need this is to check where service accounts are used.
Thanks.
Kind regards,
Bart
Bart Timmermans | Consultant at inovativ
Follow me @
My Blog | Linkedin |
Twitter
Please mark as Answer, if my post answers your Question. Vote as Helpful, if it is helpful to you.

Hi Bart,
To parse the event log, you can refer to the cmdlet "Get-WinEvent", and how to use this cmdlet to parse event log, please check this article, you can also add the "-computername" to query event log from remote computers:
Use PowerShell Cmdlet to Filter Event Log for Easy Parsing
To monitor the logon history, please check this function to start:
function Get-Win7LogonHistory {
$logons = Get-EventLog Security -AsBaseObject -InstanceId 4624,4647 |
Where-Object { ($_.InstanceId -eq 4647) -or (($_.InstanceId -eq 4624) -and ($_.Message -match "Logon Type:\s+2")) -or (($_.InstanceId -eq 4624) -and ($_.Message -match "Logon Type:\s+10")) }
$poweroffs = Get-EventLog System -AsBaseObject -InstanceId 41
$events = $logons + $poweroffs | Sort-Object TimeGenerated
if ($events) {
foreach($event in $events) {
# Parse logon data from the Event.
if ($event.InstanceId -eq 4624) {
# A user logged on.
$action = 'logon'
$event.Message -match "Logon Type:\s+(\d+)" | Out-Null
$logonTypeNum = $matches[1]
# Determine logon type.
if ($logonTypeNum -eq 2) {
$logonType = 'console'
} elseif ($logonTypeNum -eq 10) {
$logonType = 'remote'
} else {
$logonType = 'other'
# Determine user.
if ($event.message -match "New Logon:\s*Security ID:\s*.*\s*Account Name:\s*(\w+)") {
$user = $matches[1]
} else {
$index = $event.index
Write-Warning "Unable to parse Security log Event. Malformed entry? Index: $index"
} elseif ($event.InstanceId -eq 4647) {
# A user logged off.
$action = 'logoff'
$logonType = $null
# Determine user.
if ($event.message -match "Subject:\s*Security ID:\s*.*\s*Account Name:\s*(\w+)") {
$user = $matches[1]
} else {
$index = $event.index
Write-Warning "Unable to parse Security log Event. Malformed entry? Index: $index"
} elseif ($event.InstanceId -eq 41) {
# The computer crashed.
$action = 'logoff'
$logonType = $null
$user = '*'
# As long as we managed to parse the Event, print output.
if ($user) {
$timeStamp = Get-Date $event.TimeGenerated
$output = New-Object -Type PSCustomObject
Add-Member -MemberType NoteProperty -Name 'UserName' -Value $user -InputObject $output
Add-Member -MemberType NoteProperty -Name 'ComputerName' -Value $env:computername -InputObject $output
Add-Member -MemberType NoteProperty -Name 'Action' -Value $action -InputObject $output
Add-Member -MemberType NoteProperty -Name 'LogonType' -Value $logonType -InputObject $output
Add-Member -MemberType NoteProperty -Name 'TimeStamp' -Value $timeStamp -InputObject $output
Write-Output $output
} else {
Write-Host "No recent logon/logoff events."
Get-Win7LogonHistory
Refer to:
https://github.com/pdxcat/Get-LogonHistory/blob/master/Get-LogonHistory.ps1
If there is anything else regarding this issue, please feel free to post back.
If you have any feedback on our support, please click here.
Best Regards,
Anna Wang
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

How to access Portal Logged in user in Web Service application

Hi Experts,
I have created one Deployable Proxy and based on that i have created Web Based (WAR) project. to consume the proxy i have created Servlet based java file which invokes Web services. Based on this WAR project i created EAR application which deploys on J2EE server.
I am facing issue while accessing Portal Logged in user in my Servlet Class in WAR project so can you please provide inputs for how we can access Portal Logged in user in our Servlet class? also how we can access LDAP detailes of portal Logged inuser ?
I tried to fetch the Logged in user from servlet request but i can't access it giving me null value. Following is the method details that i am using in my servlet.
protected void doGet(HttpServletRequest request,HttpServletResponse response)throws ServletException, IOException
IUser user = UMFactory.getAuthenticator().getLoggedInUser();
String strName = user.getFirstName();
If I checked in LDAP values First name for logged in user is present but in my code its giving Null value.
Can you please provide your inputs on above issue.
Regards,
Rahul

have you found a solution this problem yet?

Record display to match log in user

I'm trying to create a log in area with user information. I
have used the update record and it does display a record but only
the first record that I input no matter what username I log in
with. I want to have the record display match the logged in users
information.

Heya Joe,
Try this:
1. Restrict access to page for logged in users.
2. Create form you'll use for Update Record Server Behavior.
3. Add a hidden field in the form for primary_key name and id
= primary_key
4. Add the value for primary_key as the session login_id from
the Bindings Tab in Dreamweaver.
5. Add Update Record Server Behavior. Select primary_key form
field for integer primary key in Update Record SB and add other
form fields corresponding to update record accordingly.
6. save, put, login, visit, update logged in users record.
Hope that helps!

Using alter user to change oracle password for logged in web user on XE

Hi All
I'm building an app using the pl/sql web toolkit on XE (installed on Win XP Pro SP2). (I'm not using the APEX front-end).
I'm using basic authentication and oracle database user accounts, and when a user registers for the first time I create them an oracle user account with dynamic sql, followed by some initial setup stuff, and they then log in with it.
All fine so far.
However I want to allow the user to change their oracle password as part of maintaining their user details. I've done this in the past using the web toolkit and Oracle 9i and it has worked fine using dynamic sql.
Unfortunately I can't get the same thing to work in XE.
For example, if I create the following procedure in the schema aligned to the DAD which holds my application and then run it from a browser (IE or Firefox) then the
Browser and the db just hangs - not even an error message:
CREATE OR REPLACE PROCEDURE ut
AS
v_stmt varchar2(300);
BEGIN
HTP.htmlOpen;
HTP.headOpen;
HTP.title ('User Test');
HTP.headClose;
HTP.bodyOpen;
v_stmt := 'alter user "'||user||'" identified by "BERT"';
htp.print(v_stmt);
EXECUTE IMMEDIATE v_stmt;
htp.print('Done');
HTP.bodyClose;
HTP.htmlClose;
END;
If I run the same statement in SQL*plus it's fine, and if I run the same proc for a different user then it's fine too.
I'm sure it's something to do with trying to change the credentials of the currently logged in user, but I would at least have expected an error message.
I'd be grateful for any ideas.
Thanks
Steve

Hi g.myers
Thanks for your response.
Sorry, yes, bad turn of phrase there. It's not the entire db that hangs. The web browser (either IE or FF) hangs, and if I look at v$session at this point, I can see that the user STATUS=ACTIVE and the STATE=WAITING.
I should also point out that I am using standard Oracle users as users of the application, (e.g. create a new user account called TESTER1). These users are then granted the appropriate privileges on the owning schema in order to run the app, access the tables etc.
Therefore it is the user account (e.g. TESTER1) that is running the password change procedure that is owned by the SYS schema. (However again, this is the exact code and method that I've used in the past and it has worked fine).
If I leave the browser hanging long enough, it will eventually return with the following error:
Proxy Error
The proxy server received an invalid response from an upstream server.
The proxy server could not handle the request POST /h/hopapp.pwdmaint_do.
Reason: Error reading from remote server
cheers
Steve

How do i stop workstation users from saving their network password or credentials for logging into a 2008 R2 Server workgroup?

I have a small workgroup of about 30 users that are a mix of XP Pro, 7 Pro and 8.1 desktop / laptop users that connect to a Windows 2008 R2 Server to use Quickbooks Enterprise, share files and printers. I dont want the users to be able to save their password
on their workstations, I want them to have to log in every time they connect to the server. How do I turn that off?Is the something on the server in Group Policy or a secruity setting that will not allow a saved credential for logging onto the server?

Hi,
I have a small workgroup of about 30 users that are a mix of XP Pro, 7 Pro and 8.1 desktop / laptop users that connect to a Windows 2008 R2 Server to use Quickbooks Enterprise
By connecting to the server, do you mean users log on locally or through remote desktop services, or just through network to access network resources instead of log on to the server directly?
If it’s log on locally, please disable auto logon feature by configure the registry entry
AutoLogonCount to 0, it is under HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon.
If it’s remote desktop connection, please clear Logon Credentials for corresponding remote desktop sessions.
If it’s network access, then it is by design because network logon has a single-sign-on feature.
More information for you:
How to disable Auto Login?
https://social.technet.microsoft.com/Forums/windowsserver/en-US/705b0cf8-53f1-45f9-b6bf-2ba61c8d10bf/how-to-disable-auto-login?forum=winservergen
How Interactive Logon Works
http://technet.microsoft.com/en-us/library/cc780332(v=WS.10).aspx
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Not all users are displayed for log on after a reboot or startup...

Problem summary: Not all users are displayed for log on after a reboot or startup...
This problem only occurs after a fresh start-up or restart. The only users displayed are the initial (admin user) and "Guest". Two other (non-admin) users are not shown for log on.
To work around this problem and get them to log on we have to log on as the admin user, then we can see the other users in the Fast User Switching menu (top right-hand corner of the screen), listed under the current logged on user. After selecting the non-admin user we can log in and use the laptop as normal.
If we lock the screen, use fast user switching or log out all users; all users are available for log in, until a reboot is done; at which point the non-admin users disappear again and we have to log in as the admin user and use fast user switching again.
The laptops are both brand new MacBook Airs. The initial configuration of Mac OS X Yosemite was done using the Apple ID of the purchaser (parent) and then the OS was patched, immediately, through the App store (no further updates available as of the date of this posting). After this Family Sharing was activated and new users set up for the two children who will be using these laptops.
Has anybody else experienced this problem with Yosemite?
Cheers,
David.

David,
Users not enabled for FileVault unlock are only able to log into the computer after an unlock-enabled user has started or unlocked the drive. Once unlocked, the drive remains unlocked and available to all users, until the computer is restarted.
FileVault has to be On.
To Enable the users to be able to unlock FileVault Go to:
System Preferences > Security & Privacy > FileVault ( Tab ) > Click the Lock in the bottom left > Put in your administrator password > Should see an option to Enable Users > Enable User.
Hope that helps,
Weston
Supporting Articles,
OS X: About FileVault 2 - Apple Support

Dashboard based on Crystal Report's Latest instances for the logged in user

Hi,
I am trying design a dashboard based on LiveOffice-crystal report's latest instance for the logged in user. Also there is row level security in the universe on which the crystal reports is created.
In the live office connection i have selected 'latest instance by current user' in the refresh option and published the dashboard to InfoView.
when i open the dashboard in InfoView , i find the row level restrictions being applied for different users. But the data retrived is always on-demand data and not based on the latest instance of the logged in users.
Can anyone throw some light on this issue.
Thanks

Hi,
I am trying design a dashboard based on LiveOffice-crystal report's latest instance for the logged in user. Also there is row level security in the universe on which the crystal reports is created.
In the live office connection i have selected 'latest instance by current user' in the refresh option and published the dashboard to InfoView.
when i open the dashboard in InfoView , i find the row level restrictions being applied for different users. But the data retrived is always on-demand data and not based on the latest instance of the logged in users.
Can anyone throw some light on this issue.
Thanks

Changed Ulimits values for the Oracle user and getting error -bash: ulimit: max user processes: cannot modify limit: Operation not permitted when logging in.

I'm trying to increate the ulimits for max user processes and open files for the oracle user. I've set the values in limits.conf, /etc/profile and in oracle's environment scripts. Now when I log in as oracle I get the below errors. If I change the ulimits back to the original values errors go away but ulimits aren't changed.
login as: oracle
[email protected]'s password:
Last login: Fri Mar 6 09:56:02 2015 from mtkadmin12
You are logging onto an Oracle system.
Kickstarted on: 2014-06-05
-bash: ulimit: max user processes: cannot modify limit: Operation not permitted
-bash: ulimit: max user processes: cannot modify limit: Operation not permitted
[oracle@servername ~]$

Thanks for the update.
I modified the /etc/security/limits.d/90-nproc.conf and added a line for oracle and also modifed the oracle.sh file. The ulimits are setting correctly when I su - oracle but they are still wrong when sshing in as oracle.
[root@mtkdevorap11d-1 ~]# su - oracle
[oracle@mtkdevorap11d-1 ~]$ ulimit -Ha
core file size          (blocks, -c) unlimited
data seg size           (kbytes, -d) unlimited
scheduling priority             (-e) 0
file size               (blocks, -f) unlimited
pending signals                 (-i) 1030982
max locked memory       (kbytes, -l) 94371840
max memory size         (kbytes, -m) unlimited
open files                      (-n) 65536
pipe size            (512 bytes, -p) 8
POSIX message queues     (bytes, -q) 819200
real-time priority              (-r) 0
stack size              (kbytes, -s) unlimited
cpu time               (seconds, -t) unlimited
max user processes              (-u) 16384
virtual memory          (kbytes, -v) unlimited
file locks                      (-x) unlimited
[oracle@mtkdevorap11d-1 ~]$
[oracle@mtkdevorap11d-2 ~]$ ssh mtkdevorap11d-1
Last login: Mon Mar 16 13:04:16 2015 from mtkdevorap11d-2.conveydev.com
You are logging onto an Oracle system.
Kickstarted on: 2014-06-05
[oracle@mtkdevorap11d-1 ~]$ ulimit -Ha
core file size          (blocks, -c) unlimited
data seg size           (kbytes, -d) unlimited
scheduling priority             (-e) 0
file size               (blocks, -f) unlimited
pending signals                 (-i) 1030982
max locked memory       (kbytes, -l) 64
max memory size         (kbytes, -m) unlimited
open files                      (-n) 4096
pipe size            (512 bytes, -p) 8
POSIX message queues     (bytes, -q) 819200
real-time priority              (-r) 0
stack size              (kbytes, -s) unlimited
cpu time               (seconds, -t) unlimited
max user processes              (-u) 16384
virtual memory          (kbytes, -v) unlimited
file locks                      (-x) unlimited
[oracle@mtkdevorap11d-1 ~]$

Users for logging on to receiver systems

Hi,
The user name and the password that the IS needs for logging on to a receiver system to deliver a message are kept in the database of the Integration Directory and cached in the IS.
According to the documentation, the passwords are stored in the secure store of the directory server and in an obfuscated form in the persistent cache on the IS.
Anyone knows what mechanisms are used to make the secure store of the directory server secure?
And does any of you know in what form are the passwords stored in the IS cache? (I suppose that means what hashing algorithms are used?)
Thanks,
Greg

If you don't install the security libraries (during the WebAS install) your secure store passwords will be hashed (one-way)...
If you installed the securitiy libraries then you can encrypt the secure store (the security libraries are also require if you're going to use https)...
The best way to protect your secure store is to protect/secure the filesystem where it resides (/sapmnt/<SID>/global)

Does Muse have a widget that will allow users to book tables and/or pay for take-away?

I have already used Muse to set up my portfolio. Now a new challenge - I need to create a website for mobile / tablet users that permits browsing dishes, booking tables and maybe a widget that allows them to pay on-line before collection? I've scanned through the tutorials but not found anything relating to e-economy pages.

Hi,
No such widget in Muse, but you will need a third party service to achieve this, where you will store the data, like who booked the table, for how long etc. You can embed them in Muse and it should work. An example is given below
Form Templates
Do let me know if you have any question.

In AppStore.app for some reason when I try to update my apps, it asks for the wrong user account than the one that I am logged in with. This makes me unable to update my apps

In AppStore.app for some reason when I try to update my apps, it asks for the wrong user account than the one that I am logged in with. This makes me unable to update my apps

You would have downloaded those apps with the wrong Apple ID then created a new Apple ID which is the on you are on now. This is acting as normal because all content downloaded from the iTunes and App Store is attached to the Apple ID it was downloaded with. To stop this you would delete the apps and redownload them with your current Apple ID you are signed in with.

Urjent:Partition error:Logging out user [Admin], active for 0 minutes

Hi all,
Iam using 11
Wen iam creating Transaparent partition its validating successfully , but wen iam saving it its giving error , partition creation failed
Error: 1051037: Logging out user [Admin], active for 0 minutes
and it s giving error reading ddb file
i tried with maxl also but it continiously running for 30 mints , its horrible , actually it takes 2 mints
how can i resolve this issue, any help would be appriciated
thanks
Edited by: user8815661 on 26 avr. 2010 05:18
Edited by: user8815661 on 27 avr. 2010 04:00
Edited by: user8815661 on 3 mai 2010 04:18

Sounds like there is some sort of ddb file corruption. There are many causes, but the quickest fix I have found is usually a file-based deletion of the ddb file on both the source and target side of this partition. The attempt to create a partition on this database will cause a new ddb file to be created. Of course, this is dangerous. You can't have any other partitions on either the source or target side...or they will be deleted by this step. But the only purpose of the ddb file is for partition definitions, and it exists on both source and target.
I've found this happens if one side of a partition (one of the ddbs from source or target) gets the file deleted, or communication is down between the source database server and target database server.

Widget for Logged On Users

Similar Messages

Maybe you are looking for