Wifi clients get an address but cannot access network

Hello,
I have setup 1131 AP's which connect to a wlan controller 2106
The dhcp server is a windows 2003 server. All equipment is connected to inside lan, no vlans have been configured.
AP's are normally associated and wifi clients get an ip address from the windows dhcp server.
Strange thing however is that when you are connected to the wifi, you cannot access anything. Dns is configured properly and even when you enter an ip address of a website, I cannot reach it.
I have no idea what can be wrong. Is it that we use internally a 172.16.x.x /16 range and the wlan controller uses 172.16.2.x for both ap as management interface and the dhcp scope is 172.16.5.x /16. Same subnet.
Anybody a clue?
Thanks and regards,
Ralph Willemsen
Arnhem, Netherlands

Hello Scott,
This is the running config (changed company name to 'company')
config sysname Cisco2106
config location expiry tags 5
config time timezone location 14
config load-balancing window 0
config interface address management 172.16.2.39 255.255.0.0 172.16.2.254
config interface port management 1
config interface dhcp management primary 172.16.1.7
config interface dhcp service-port enable
config interface address virtual 192.168.222.254
config interface address ap-manager 172.16.2.40 255.255.0.0 172.16.2.254
config interface port ap-manager 1
config interface dhcp ap-manager primary 172.16.1.7
config 802.11b cac voice sip codec g711 sample-interval 20
config 802.11b cac voice sip bandwidth 64 sample-interval 20
config 802.11b 11gsupport enable
config auth-list ap-policy ssc enable
config auth-list ap-policy mic enable
config auth-list ap-policy lsc enable
config logging console warnings
config logging console 4
config logging traceinfo disable debugging
config logging buffered notifications
config logging buffered 5
config mobility group domain "company"
config mobility group member add 00:00:00:00:00:00 172.16.2241 RF_company
config nmsp notification interval rssi rfid 2
config msglog level warning
config 802.11a cac voice sip codec g711 sample-interval 20
config 802.11a cac voice sip bandwidth 64 sample-interval 20
config 802.11a disable network
config database size 512
config dhcp proxy disable bootp-broadcast disable
config network rf-network-name "company"
config network ap-mcast-mode multicast 224
config network multicast mode multicast 224
config network otap-mode enable
config country NL
config rfid timeout 1200
config rfid status enable
config rfid mobility pango disable
config mgmtuser add encrypt admin 1 b56d213abcxxxxxxxxxxxxxxxxx2 75ca55720920f69dad20d8c1aee6b0ffa8e005af 16 f569db123c03d8c62ab3c11c8e31f60b0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 read-write
config wlan session-timeout 1 0
config wlan dhcp_server 1 172.16.1.7
config wlan exclusionlist 1 60
config wlan wmm allow 1
config wlan mfp client enable 1
config wlan broadcast-ssid enable 1
config wlan interface 1 management
config wlan create 1 company "company"
config wlan apgroup add company company
config wlan apgroup description company company
config wlan apgroup interface-mapping add company 1 management
config wlan security wpa wpa1 ciphers tkip enable 1
config wlan security wpa wpa1 enable 1
config wlan security wpa wpa2 ciphers tkip enable 1
config wlan security wpa wpa2 ciphers aes enable 1
config wlan security wpa akm 802.1x disable 1
config wlan security wpa akm psk set-key hex encrypt 1 3d943b0edb82b2f94b183a9f0099b8d7 724fe9f09921d471b36d7451d4f3f5f941aceecb 48 919d3a5b5aa1b2add548add84850a2140f635bf3a65e54ebfb1528a6e91954804e595cfc03415ded89272776cd9f914e000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 1
config wlan security wpa akm psk enable 1
config wlan security wpa enable 1
config wlan enable 1
config advanced 802.11b channel add 1
config advanced 802.11b channel add 6
config advanced 802.11b channel add 11
config advanced 802.11b channel load disable
config advanced 802.11b channel noise enable
config advanced 802.11b channel foreign enable
config advanced 802.11b receiver pico-cell-v2 rx_sense_thrld 0 0 0
config advanced 802.11b receiver pico-cell-v2 cca_sense_thrld 0 0 0
config advanced 802.11b tx-power-control-thresh -65
config advanced probe limit 2 500
config advanced 802.11a channel add 36
config advanced 802.11a channel add 40
config advanced 802.11a channel add 44
config advanced 802.11a channel add 48
config advanced 802.11a channel add 52
config advanced 802.11a channel add 56
config advanced 802.11a channel add 60
config advanced 802.11a channel add 64
config advanced 802.11a channel add 100
config advanced 802.11a channel add 104
config advanced 802.11a channel add 108
config advanced 802.11a channel add 112
config advanced 802.11a channel add 116
config advanced 802.11a channel add 120
config advanced 802.11a channel add 124
config advanced 802.11a channel add 128
config advanced 802.11a channel add 132
config advanced 802.11a channel add 136
config advanced 802.11a channel add 140
config advanced 802.11a channel load disable
config advanced 802.11a channel noise enable
config advanced 802.11a channel foreign enable
config advanced 802.11a receiver pico-cell-v2 rx_sense_thrld 0 0 0
config advanced 802.11a receiver pico-cell-v2 cca_sense_thrld 0 0 0
config advanced 802.11a tx-power-control-thresh -65
config advanced probe-limit 2 500
transfer download path \/
transfer download filename cisco2106-config
transfer download serverip 172.16.5.4
transfer upload path \/
transfer upload filename cisco2106-config
transfer upload datatype config
transfer upload serverip 172.16.5.4

Similar Messages

  • I am trying to download itunes and keep getting an error message cannot access network location %appdata%

    I am trying to download itunes to windows 7 and keep getting the error message "cannot access network location $APPDATA%\." I have contacted an Apple advisor and was not able to resolve the problem. What to do?

    Since this a problem pertaining to the iTunes application, you might have better luck posting this in the iTunes forum.
    https://discussions.apple.com/community/itunes
    B-rock

  • TS4062 I cannot get a WiFi signal, which means that I cannot access all of the other features on my ipod. Is there anyway I can access all of the other features without Siri or WiFi?

    I cannot get a WiFi signal, which means that I cannot access all of the other features on my ipod. Is there anyway I can access all of the other features without Siri or WiFi?

    Hi. The two user tips both describe a sequence of steps that should get your library from the point where it threatens to wipe data from your device to where it is syncing normally, while recovering as much information as possible. It may still be necessary to wipe and reload the device but this should only take place once all the data that can be recovered has been recovered.
    Doing step 1 of 8 and then complaining things aren't the way you want them to be yet strikes me as premature...
    Since you appear to have all your media content, and we are discussing an iPod classic, not an iOS device, the main worries are already taken care of. What's left is ratings, playcounts, playlist membership and checked status. Since your device holds only part of your library at best you could only recover the missing data for the content that is on the device using third party tools.
    Recreating the previous checked/unchecked status of every track in your library from where you are now may not be that easy. Syncing with selected playlists has many advantages, one of which would have been that you would have a named playlist that could have been retrieved by 3rd party software if you had used this method.
    You haven't explained what caused your problem in the first place, but if you have a Previous iTunes Libraries folder holding old copies of your iTunes database (generated with each iTunes update) then it would be possible to restore the most recent of these and then update the library with any changes in your media folder.
    BTW Apple doesn't offer free support for this kind of issue with iTunes.
    tt2

  • HT1218 After a recent iTunes update attempt iTunes no longer functions and the airport extreme base station is not accessable on our computer.  We still have wifi but cannot access the base station software.

    After a recent iTunes update attempt iTunes no longer functions and the airport extreme base station is not accessable on our computer.  We still have wifi but cannot access the base station software.

    Thanks for the reply. I appreciate the response. I tried that approach this evening and it didn't work for me. (Technically it worked for me, when I was hardwired into my base station, but would not work for me wirelessly, which is my main issue.)
    Again, using the approach you recommended works only if I have my ethernet cable attached to the LAN port so my computer is communicating directly to the base station through the hard wire. I am able to scan for my base station and make setting adjustments normally this way too.
    As soon as I disconnect from the LAN port and try to go wireless is where I run into problems. The Base Station's wireless network I created is available to choose in the top right corner of the monitor with all of the other available wireless devices/networks -- but the network I created does not have access to the internet. I am also unable to configure my Base Station wirelessly. When my Airport Utility tries to scan for the Base Station and Network, it cannot find any Apple Wireless Device. It's like the Wireless Network in my base station is not sending out a signal.
    Is there a way to resolve this issue?

  • I created a Group and put in all names and email addresses but cannot get the group to appear in an outgoing email message.  What am I doing wrong?

    I created a Group and put in all names and email addresses but cannot get the group to appear in an outgoing email message.  What am I doing wrong?

    This may help.
    Can't connect to the iTunes Store
    What happens whenyou try to connect? Error messages?

  • Got help fixing my youtube problem, now that is working.  In the process of making the fix, lost my aol set up. Re installed it, but cannot access the icon. How do i get my AOL back?

    Got help fixing my youtube problem, now that is working.  In the process of making the fix, lost my aol set up. Re installed it, but cannot access the icon. How do i get my AOL back?

    If it's an application, it should be in the Applications folder. If in doubt, double click on the hardrive icon to open it up, then press Command+F (find) and in the window that comes up for what you want to find, type in AOL and it should appear. You can either drag it to the Dock for easy access or make an alias of that, and drag that alias to the Dock. Oh, and just so's you know, this forum is for Desktop macs only. We may be able to answer your question about a MacBook Pro. Same kind of animal, but different breeds.
    good luck
    John b

  • I am connected to my wireless network but cannot access the internet. Any ideas?

    I am connected to my wireless network but cannot access the internet. Any ideas?

    Your router may not have given your iPad a valid IP address. Go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
    Sometimes the fix can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPad (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
    If you need more help please give more details on your network, i.e., your router make, model and version, the wifi security being used (WEP, WPA, WPA2), etc.

  • Created new workspace, user created OTN account but cannot access workspace

    hi,
    i recently created GFW_SYSTEMS_TEAM beehiveonline workspace.
    i added 4 external users including myself as an external user using my gmail account: [email protected] so i could verify the process from an external user point of view
    i created my OTN account and verified it but cannot access the workspace using this login.
    when i check the users in beehiveonline-apex i see that all users are verified.
    when i check the users in the workspace, 2x external users are missing but my gmail user is there
    when i check the ~BOLADMIN tool i see that my gmail user is missing - only my oracle account is visible; the other 2x external users are also missing...
    my oracle and gmail email addresses are similar : neil.pritchard@~ oracle.com, gmail.com
    i am accessing from my secondary oracle laptop (OBI); not on vpn
    can you tell me if there are any known conflicts with the above setup?
    more info:
    OS: XP SP2; browser IE8
    when accessing teamcollab or workspaces i get 'Internet Explorer cannot display the webpage' during login authentication
    best regards
    Neil
    Edited by: 972236 on 20-Nov-2012 05:49

    Neil,
    we spotted some provisioning scripts that had failed and are re-running them now - hoefully the extra users will be in the group/workspace soon. The 2 emails for you will not be a clash as they are valid and unique.
    Phil

  • My hard disk crashed and I cannot find out how to "contact customer service" other than this forum.  The website seems to just take me in a circle. I need to de-activate a license but cannot access the software due to a crashed hard drive.  Please help.

    My hard disk crashed and I cannot find out how to "contact customer service" other than this forum.  The website seems to just take me in a circle. I need to de-activate a license but cannot access the software due to a crashed hard drive.  Please help.

    Hi Anthony ,
    Here is the link to connect with Adobe Chat Support.
    https://helpx.adobe.com/adobe-connect/kb/connect-chat-support.html
    Hope your query gets resolved .
    Regards
    Sukrit Dhingra

  • Installed Netweaver 2004s SP7 but cannot access any tools

    I have successfully Installed Netweaver 2004s SP7 Java version but cannot access any of the tool sets. When I try the URL's localhost:50100/irj or localhost:50100/caf it takes me to the initial screen. When I click on any of the tabs (example: Guided Procedures followed by Design time) everything is blank. If I type the URL localhost:50100/webdynpro/dispatcher/sap.com/cafeugpuidt/AppWorkset it takes me to the design time but when I click on anything to create actions or processes, I get the error message "The Web Dynpro 'AppWorkset' Application has expired. Restart the application with refresh button or the following link AppWorkset"
    My goal is to play with Guided Procedures. Is EP the only way to access design time and runtime or are there other ways?

    Yeah well that sounds like DNS problems so I suggest you change your DNS settings to use Google DNS servers at 8.8.8.8 and 8.8.4.4
    If you found this post helpful, please click on the star on the left
    If not, I'll try again

  • HT1941 I have inadvertently changed a file permission setting. When opening Aperture I get the following; Aperture cannot access this library. To use this library make sure it's file permissions are set correctly. I am an old dude new to Mac OS. What up?

    I have inadvertently changed a file permission setting. When opening Aperture I get the following; "Aperture cannot access this library. To use this library make sure it's file permissions are set correctly". I am an old dude new to Mac OS. Looked in settings but have no idea how to allow file sharing to myself. I have been using Aperture actively for 6 weeks. I'm the only one using this Mac. What up?

    Back up all data now.
    This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. If none of this is meaningful to you, you don't need to worry about it.
    Step 1
    If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. You can demote it back to standard status when this step has been completed.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Drag or copy — do not type — the following line into the Terminal window, then press return:
    sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:20 ~ $_ ; chmod -R -N ~ $_ 2> /dev/null
    Be sure to select the whole line by triple-clicking anywhere in it. You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning. If you don’t have a login password, you’ll need to set one before you can run the command.
    The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
    Step 2
    Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
    When the OS X Utilities screen appears, select Utilities ▹ Terminal from the menu bar. A text window opens.
    In the Terminal window, type this:
    resetpassword
    That's one word with no spaces. Then press return. A Reset Password window opens. You’re not going to reset a password.
    Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select  ▹ Restart from the menu bar.

  • Mac OS X version 10.6.8 but cannot access 'mission control'?

    I have Mac OS X version 10.6.8 but cannot access 'mission control'. I have read about it being really good but don't have it on my desktop? I'm not sure if my laptop is too old and needs to be updated or what, but have no idea why I can't find out ANYWHERE how to get it onto my laptop.
    Sarah

    MIssion control is a feature introduced in OS X 10.7. Prior to that, it was called Expose (with an accent mark over the 2nd e).  See this Apple note on how to use Expose.

  • After upgrading to Mountain Lion I am not able to access "security and privacy" button under "system preferences". I like to activate "find my mac" but cannot access privacy setting after upgrade. Kindly advice.

    After upgrading to Mountain Lion I am not able to access "security and privacy" button under "system preferences". I like to activate "find my mac" but cannot access privacy setting after upgrade. Kindly advice.

  • MacBook Pro:  I have changed my old apple id address but cannot now update apps as it sees my old apple id name as the primary holder.  I decided to edit back to the old apple id but it won't allow me to do so. What else can I do?

    MacBook Pro:  I have changed my old apple ID address but cannot update apps now as it still reverts to my old ID address as the primary holder (it is the apple ID that I have purchased the apps, etc).  I have tried to edit back to the old address but it will not let me type in the address and there is no blue edit sign on the rhs.  What can I do to rectify this problem?.  Is there a waiting period after editing an apple ID address? I have spent the good part of yesterday searching the net and know that there is a major problem with this but wondering if anyone has found a solution.  Thank you.

    Hello Jamcef,
    Thank you for the question.  Use these steps to change the Apple ID signed into the iTunes Store:
    Sign in with a different Apple ID
    Tap Settings > iTunes & App Stores.
    Tap your Apple ID.
    If you see the option to Sign In, you can change your Apple ID now.
    Tap Sign Out.
    Enter your Apple ID and Password and tap Sign In.
    Or if you don't have another Apple ID, tap Create New Apple ID.
    You can find the full article here:
    iOS: Sign in with a different Apple ID in the iTunes Store, App Store, and iBooks Store
    http://support.apple.com/kb/ht1311
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • I have lost my Safari app and all the bookmarks that go with it. I have tried to download my back-up on external drive but cannot access it. Tried a start with C key held down but still no access to the back-up app.

    I have lost my Safari app and all the bookmarks that go with it. I have tried to download my back-up on external drive but cannot access it. Tried a start with C key held down but still no access to the back up app.
    Have used Superduper app. to back up and checked back-up occasionally to see if all files present  and appeared OK.
    I had previously started machine using original CD #1 to try and replace Eudora which was acting up. Did not knowingly touch Safari.
    Running iMAC System 10.4.11
    How can I successfully download from the Maxtor back-up?
    Ivan

    Further info.
    I checked the content of my other back-up and found the bookmark Bookmarks.plist in the library under Safari
    Dumped the existing copy in the computer and drag-dropped the back up. All bookmarks restored.
    Solved the Stickies problem by using Spotlight  to find file "stickiesdatabase" and did a drag- drop to replace file. All data restored.
    Re Ical data loss. Used Spotlight to find iCal document in  Library - Preferences where I found com.apple.iCal.plist in folder.
    Got ready to make change but did not immediately remove file. When I returned to Preferences folder to grab above document,
    the readable descriptors had been changed to code consisting of some upper case letters and/or single symbols!
    So now I cannot tell which is the symbol  iCal.plist
    Thanks for leading me so far, but how do I find that plist for my calendar?

Maybe you are looking for