Wifi functional on MBP running 10.8.5 but not on imac running 10.8.5.

Hi all
i am facing a very wierd situation where in i am able to connect to my wifi router which is TP-Link 3240 via my MBP running 10.8.5. I also have an iMac on which earlier i was running 10.8.4 but started facing issues in wifi connection. I was constantly getting self-assigned ip address on iMac. After browsing a bit i manually updated the iMac to 10.8.5 but still i m facing issues regarding connecting to my wifi router. All of my other devices successfully connect to it getting a DHCP address but only specifically on iMac (2011) i am facing this issue. Pretty much tried everything from removing System config folder to resetting the SMC. I am still facing the same issue. Any help is highly appreciated. Also after going through the console logs, there is the following error line:
subnet_route: write routing socket failed, Network is unreachable.

hi carpetbeatle.
I am facing the same issue even in the recovery partition. getting a self assigned ip and alert on no internet connection. Curious part is before i changed my router it was getting connected to same network from another router, only difference being the SSID was hidden on the router as in router didnt broadcasted the SSID, but on the new router with ssid broadcasted i dont know whats the issue. ne other suggestions

Similar Messages

I can't connect to my school's free wifi. i was able to do it before but not anymore i get the self assign ip agrees message .it has no password only a pop up window before you connect to agree to school terms for wifi use. i don't get that window anymore

I can't connect to my school's free wifi. i was able to do it before but not anymore i get the self assign ip addrees message .it has no password only a pop up window before you connect to agree to school terms for wifi use. i don't get that window anymore. i tried everything I can think of. It is a 2010 macbook pro but i recentrly updated to osx lion and even with lion it was working fine so I nkow it is not the update. also Im able to connect to other internets at home it works great. starbucks too. but i became so frustated that i reset my computer to manufactuter setting and reinstall snow leopard on it. still I cant connect. I need help please i have been searching all over the web for help and i see people has been having this same problem for years now.. oh yeah and i know it is not the internet cuz there are other macs connecting to it without a single problem so i think it is an isolated problem plase help....i have follow many advises such as delete the internet from your prefered netwoks. restar your commputer etc etc.

Be sure Safari does not have the Block Pop-Up Windows preference set.
Where I work now there are several unencrypted VLANs that require authentication, and Safari promptly pops up a window for me to register every time.

Remote Enabled function module of SAP working - debug mode but not run mode

Hi,
When a remote function module is called from Java a message should get thrown from the function module which the FM is throwing but Java is not able to fetch the error. This problem is coming in execution mode but if we are in debugging mode and go to the function module remotely the error is getting triggered.
Please suggest the solution to the problem.
Thanks,
Abhishek

Hello
try something like this
try {
JCO.Client.execute(myFunction)
} catch (JCO.AbapException ex) {
System.out.println ("ABAP Exception: " + ex.getKey() + " " + ex.getMessage());
the problem is, that JCo ABAP Exceptions are subclasses of java.lang.RuntimeException so the Java Compiler doesn't force you to catch them
regards franz
reward points if useful

ITunes install 10.6.3 freezes on MBP (but not on iMac)

The installation of the iTunes update 10.6.3 on my iMac Mac OS X (10.7.4), 2011, 27", i7, SSD ran without problems
But
After trying to install iTunes 10.6.3, I get all kinds of strange problems on my MBP 10.7.4 2011, i7, SSD
Almost all programs I use cause problems and I cannot end Mail or restart the laptop. Must be forced.
Document "Read first" in the install package is not readable.
The installation process runs until abt. 70% finished, then says 2 more minutes, 7 minutes, 12 minutes etc.
After reinstalling Lion I'm back at iTunes 10.6 (40) and the MBP seems to work reasonably normal
Have I done something stupid?
Time for Apple to do something?

Thats what me and the guy on the phone thought, he tried tking
Me through it, he then said, actually, there is only
Support for mac users on the site aswell, as he was trying to direct me to email support aswell, though he then realised that gettin support on the apple express is now just for mac too
I cant complete the install of iTunes 10.6.3, no.
As cant many other windows 7 users.
But it does install so much that its useable, but doesnt fully install and doesnt complete mobile device application at all, so i cant sync or even connecty iPhone to itunes.
The message reads pretty much the same as this one posted earlier
"The installer encountered errors before iTunes could be configured
Errors occurred during installation. Your system has not been modified"

Iphone dropping wifi then reconnects while on skype or viber but not netflix

while on call in skype or viber at home, my iphone 4 would drop the VOIP call, wifi icon immediately switches back to 3G then after 2 seconds switches back to wifi again(I never have to go connect again manually, it always comes back by itself). All happens without any intervention, and once the wifi icon comes back i can dial skype call again. This could happen 3 or 4 times on a 30 mins skype/viber call.
I have a 1st gen 3G iPad as well and I use it to watch movies on netflix, it has never dropped the wifi like that even after watching movies for more than an hour. Its just very strange. I've search around the internet and people who have iphone wifi drop problems always have to go reconnect to wifi manually or restart the phone to connect, which is not my case. I've also tried resetting the network settings on the iphone, didn't help.
I have 2 PCs, a Macbook pro, and a PS3, all using the same wifi connection, and like the ipad none of them have any problems with the wifi at all (not all connected a the same time, i usually have the MBP and the 2 iOS devices connected at all times). And for the iPhone, the wifi drop seems to isolate to Skype and Viber calls only. Anyone have any idea how to fix this? by the way, i have never tried VOIP call on other wifi networks other than my house, so I don't know if this is because something is wrong with my equipment at home. VOIP call on 3G network when wifi is not available doesn't have any problem.
I have a AT&T iphone4 on 4.3.2, wifi is through a Linksys router (g i think), I'm also using an AT&T microcell that 70% of the time doesn't even show up on my iphone. Thanks!

I have the same issue with my Iphone4, never had this with my Iphone 3gs. I have tried a different router (I have a d-link and a netgear) and no difference. I read on another forum that bluetooth might interfere. Yesterday I ran a test and after I turn bluetooth off I did not have any dropped Skype calls. before this my Skype call would drop or I would have a really bad connection about 8min or so into the call. I think this is because the iphone will start up bluetooth and it interferes with wifi. I am not 100% sure this cures the problem but it might.
Marcel.

PDF Documents with Functional Buttons - Works for IE and FireFox but not for Chrome and Safari

To all,
Good morning. Our institution developed a PDF document with functional buttons for printing and e-mailing. When the document is viewed via Internet Explorer and Firefox, the functional buttons work as expected. However if the document is viewed via Chrome and Safari, the functional buttons do not work. The workaround for those who are using Chrome and Safari, the PDF document needs to be saved to their local drive before the functional buttons work.
Has anyone experienced this issue before? If yes, what was your solution other than the workaround.
Thanks.
Babylon5

Here's how to configure your browser to run Adobe Reader: http://helpx.adobe.com/acrobat/using/display-pdf-browser-acrobat-xi.html

WiFi Direct to Officejet or connect to Internet, but not both

My PC is running Windows 7 Professional. I have HP 7610 that includes the WiFi Direct feature allowing for a PC or other device to establish a WiFi connection to the printer without using a router. Pretty nice feature, however, the software setup establishes a separate "network" for the PC-to-printer connection from that used to connect to the Internet. So, in order to print I have to disconnect from the Internet and connect to the printer's network connection, then reverse that when done. It's akin to virtually plugging and unplugging phone lines!
I have attempted using Win 7's Microsoft Virtual WiFi Miniport Adapter via CMD line instructions, see http://community.spiceworks.com/how_to/show/897-how-to-set-up-virtual-wifi-in-windows-7, and though that does enable the virtual WiFi connector and create a secure network connection to the printer, it does not seem to allow me to access the Internet and use the printer at the same time.
Any ideas, or am I stuck until a router enters the fray?

This will work for you.
Connect wireless printer anywhere, convert from wired, bypass failed radio, add WPA2 security.
http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/Connect-your-wireless-printer-when-away...
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

I can access a function in a package using OCI drivers but not PDO drivers

Hello all, i am a newbie to Oracle and its drivers for PHP. I would like to use PDO, and I have my database activity in packages, which have procedures and functions. My package has overloaded functions and that has been giving me a tough time with these drivers. So one signature of my function get_data contains a four arguments and all four are numbers, while another signature of get_data has the first two as numbers and the next two as varchar2. So when I try to access this function which is part of a package, I am able to retrieve data, and the driver I am using is OCI8, but when I try to do the same with PDO, it does not work. It gives me this error,
*General error: 6553 OCIStmtExecute: ORA-06553: PLS-307: too many declarations of 'GET_DATA' match this call (/var/www/php-5.3.3/ext/pdo_oci/oci_statement.c:146)' in /var/www/pdo_check.php:251 Stack trace: #0 /var/www/pdo_check.php(251): PDOStatement->execute() #1 /var/www/pdo_check.php(345): dbPDO->execPackage2() #2 {main} thrown in /var/www/pdo_check.php on line 251 *
I got this error earlier with OCI drivers, then I added the datatype while binding the values.
Has anybody had this headache earlier??
##Works
*$qu = oci_parse($connect, 'select pack.get_data(:p1,:p2,:p3,:p4)as rc from dual');
$p1 = (int)121;
$p2 = (int)222;
$p3 = (int)324;
$p4 = (int)001;
oci_bind_by_name($qu,":p1",$p1,10,OCI_B_INT);
oci_bind_by_name($qu,":p2",$p2,10,OCI_B_INT);
oci_bind_by_name($qu,":p3",$p3,10,OCI_B_INT);
oci_bind_by_name($qu,":p4",$p4,10,OCI_B_INT);
oci_execute($qu) or die("did not execute");
$r = oci_fetch_array($qu);*
##Does not work
*$sql = 'select pack.get_data(:p1,:p2,:p3,:p4) from dual';
$result = $this->dbConnect->prepare($sql);
$p1 = (int)2;
$p2 = (int)2;
$p3 = (int)2;
$p4 = (int)6;
$result->bindParam(':p1', $p1, PDO::PARAM_INT);
$result->bindParam(':p2', $p2, PDO::PARAM_INT);
$result->bindParam(':p3', $p3, PDO::PARAM_INT);
$result->bindParam(':p4', $p4, PDO::PARAM_INT);
$result->execute();*
I am still perplexed why is PDO giving me an error, when I have virtually mentioned everything is asks for?

I think the only person who can really answer this question is Chris Jones. For my money I tend to steer clear of PDO as it is a bit quirky ( at least in my experience ) and it does not support reference cursors.

Function works in MS Project Pro 2010, but not in MS Project Server 2010

I have an custom enterprise text field in Project Server 2010 that uses the "Instr" function and it works fine. I created a local custom text field in MS Project Pro 2010 that was similar, but uses the "InstrRev" function and
it works fine. I then go to project server 2010 and try to create a custom enterprise text field using the "InstrRev" function and I get a message that says, "This formula contains errors. Correct the formula and try again."
It's the exact same formula that I tried in project pro - copied and pasted. Why is that? Does Project Pro allow for a wider range of VBA functions in local custom fields than Project Server does when creating enterprise custom fields?
Is there some way around this?
Thanks,
Joe

Hi Joe,
There is a way around it.
Logon to MS Project Professional.
Creat that field there
Add Field to Enterprise while in MS Project.
It has just worked for me.
Please let me know if it worked for you.
Best Regards,
Alex

Functionality to copy SO working in quality but not in Production system -

HI Friends
I have created a ztcode which uses bapi BAPI_SALESORDER_CREATEFROMDAT2 to create copies of a manually created sales order
this function was working perfectly fine as till now we only had one line item per sales order
last week we added a material which has 2 BOM items (both non stock)
We passed only the parent item into the bapi so the orders created thru the bapi had only the parent item and the child items exploded on to the order because of the BOM config already in place.
This works perfectly fine in Quality systems but failed in production
Both the systems are identical in nature in all respects visa vis transports config and system patch as well.
The BOM is maintained in CS01
both the child items are marked as Relevant for sales and BOM usage is marked as 5
I am failing to understand why it doesnt work in production
And as we have used std bapi my tech consultant has been debugging without any sucess as well
Would appreciate any thoughts on how to find a lead in solving this mystery.
Regards
Supreet Upadhyay

HI Shiva
Thanks for the answer ,we have reimported all the relevant transports thrice but in vain
Also the config is in place,I forgot to mention earlier that the manual order that we create which is used as a reference to create copy orders explodes the child items
So config doesnt seem to be an issue here.
The code should also be ok coz it works in quality
so we think somehow it has to do with the production system
we are clueless in what direction should we investigate
Supreet

HT2471 I have MacBPro and when I call wifes I Pad, she can see me but not hear me. What can I do to fix this?

I have MacBPro and when I call wife's I pad, she can see me but not hear me. Any fix?

HI,
I presume this is FaceTime you are using on the Mac ?
Make sure these ports are open in your router
http://support.apple.com/kb/HT4245
9:37 PM Wednesday; December 26, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Not connected to wifi upon opening MBP

When I open the cover of (waking up) my MBP most of the time I am immediately connected to my wifi router and, in turn, the internet. Somtimes it takes a few second to get the radiating bars to turn black black and sometimes it just keeps cycling. In the later case, I need to turn wifi off on the MBP and then turn it back on again. Proximity to the router does not seem to matter.
While it is not a big deal, it tends to be annoying. My old MBP never had this problem. I also have never encountered this problem on two iMacs that are on all the time.
Any ideas what the problem might be and how to resolve it?
It is the latest MBP running Mavericks and the router is a Linksys G

Try resetting your SMC.
Resetting the SMC of an Intel-based portable Mac with a battery you should not remove on your own
Note: This will not delete any data.
The SMC is responsible for controlling various system functions. None of your data will be deleted by resetting the SMC.
Shut down the computer by going to Apple () > Shut Down…
Select Shut Down or allow the computer to shut down automatically.
Plug in the MagSafe power adapter into a power source and then connect it to your Mac if you have not already done so.
On the built-in keyboard, press the (left side) Shift (⇧), Control (⌃), and Option (⌥) keys and the Power Button at the same time.
Release the (left side) Shift (⇧), Control (⌃), and Option (⌥) keys and the Power Button at the same time.
I hope I solved your problem.
Austin

HT1218 After a recent iTunes update attempt iTunes no longer functions and the airport extreme base station is not accessable on our computer. We still have wifi but cannot access the base station software.

After a recent iTunes update attempt iTunes no longer functions and the airport extreme base station is not accessable on our computer. We still have wifi but cannot access the base station software.

Thanks for the reply. I appreciate the response. I tried that approach this evening and it didn't work for me. (Technically it worked for me, when I was hardwired into my base station, but would not work for me wirelessly, which is my main issue.)
Again, using the approach you recommended works only if I have my ethernet cable attached to the LAN port so my computer is communicating directly to the base station through the hard wire. I am able to scan for my base station and make setting adjustments normally this way too.
As soon as I disconnect from the LAN port and try to go wireless is where I run into problems. The Base Station's wireless network I created is available to choose in the top right corner of the monitor with all of the other available wireless devices/networks -- but the network I created does not have access to the internet. I am also unable to configure my Base Station wirelessly. When my Airport Utility tries to scan for the Base Station and Network, it cannot find any Apple Wireless Device. It's like the Wireless Network in my base station is not sending out a signal.
Is there a way to resolve this issue?

MBP running at a snail's pace, and a myriad of other interrelated issues, please help :'-(

Hello, my MBP is running very slowly, MS Office for Mac constantly freezing, Safari constantly freezing, various little issues are arising with many different functions/programs when I try to use them; i.e., the enter key will just stop working in Excel or my Adobe Acrobat will shut itself down out of nowhere, Finder freezes and/or won't relaunch; these are just a few examples, but the overall theme is that I am experiencing problems in usability and functionality with my MBP across the board. There is no rhyme or reason to any of it, and all programs and apps seem to be affected. I first began noticing the problems upon installation of the Yosemite upgrade so initially thought that was the issue, but I have since found that malware items have added themselves to my Safari extensions. I found instructions to remove them entirely, but could not find them anywhere on my computer other than the Safari extensions when I followed the steps provided. I tried clicking "uninstall", but had no luck, which is not surprising since I am pretty sure the "uninstall" option listed with the extension is just part of the malware. I have "disabled" the extensions, but that didn't do anything. I'm sure that they have implanted themselves elsewhere and are lurking in the shadows of my operating system and wreaking havoc throughout my computer.
The whole situation is making it extremely difficult to get anything done, and if I don't fix it soon it is going to be the major contributing factor to my complete mental collapse.
PLEASE HELP!!!
I tried to find suggestions in other areas of the Apple Support Community, and found the EtreCheck tool in one of the discussion threads. I ran the report on my system, and it looks like my MPB is riddled with problems. I don't even know where to begin in order to correct them. I am not sure if the malware has just taken over and is behind all of these, or if I am dealing with several different sources of trouble.
Any help with this would be much appreciated, the EtreCheck report is as follows:
Problem description:
MBP usability decreased significantly after installing Yosemite. Computer constantly freezing and completing any task in any program/using any function of MBP takes 5-10x as long as it used to.
EtreCheck version: 2.1.8 (121)
Report generated February 8, 2015 at 7:53:07 AM EST
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    MacBook Pro (13-inch, Late 2011) (Technical Specifications)
    MacBook Pro - model: MacBookPro8,1
    1 2.4 GHz Intel Core i5 CPU: 2-core
    4 GB RAM Upgradeable
        BANK 0/DIMM0
            2 GB DDR3 1333 MHz ok
        BANK 1/DIMM0
            2 GB DDR3 1333 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
    Battery Health: Normal - Cycle count 364
Video Information: ℹ️
    Intel HD Graphics 3000 - VRAM: 384 MB
        Color LCD 1280 x 800
System Software: ℹ️
    OS X 10.10.1 (14B25) - Time since boot: 4 days 17:53:1
Disk Information: ℹ️
    ST9500325ASG disk0 : (500.11 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
        Macintosh HD (disk1) / : 498.88 GB (332.61 GB free)
            Encrypted AES-XTS Unlocked
            Core Storage: disk0s2 499.25 GB Online
    MATSHITADVD-R   UJ-8A8
USB Information: ℹ️
    Apple Inc. FaceTime HD Camera (Built-in)
    Apple Inc. BRCM2070 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Inc. Apple Internal Keyboard / Trackpad
    Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
    Mac App Store and identified developers
Kernel Extensions: ℹ️
        /Applications/Kies.app
    [not loaded]    com.devguru.driver.SamsungACMControl (1.4.26 - SDK 10.6) [Click for support]
    [not loaded]    com.devguru.driver.SamsungACMData (1.4.26 - SDK 10.6) [Click for support]
    [not loaded]    com.devguru.driver.SamsungComposite (1.4.26 - SDK 10.6) [Click for support]
    [not loaded]    com.devguru.driver.SamsungMTP (1.4.26 - SDK 10.5) [Click for support]
    [not loaded]    com.devguru.driver.SamsungSerial (1.4.26 - SDK 10.6) [Click for support]
        /Library/Extensions
    [loaded]    com.sophos.kext.sav (9.2.50 - SDK 10.8) [Click for support]
    [loaded]    com.sophos.nke.swi (9.2.50 - SDK 10.8) [Click for support]
Problem System Launch Agents: ℹ️
    [killed]    com.apple.CallHistoryPluginHelper.plist
    [killed]    com.apple.CallHistorySyncHelper.plist
    [killed]    com.apple.cmfsyncagent.plist
    [killed]    com.apple.coreservices.appleid.authentication.plist
    [killed]    com.apple.EscrowSecurityAlert.plist
    [killed]    com.apple.Maps.pushdaemon.plist
    [killed]    com.apple.rcd.plist
    [killed]    com.apple.recentsd.plist
    [killed]    com.apple.SafariNotificationAgent.plist
    9 processes killed due to memory pressure
Problem System Launch Daemons: ℹ️
    [killed]    com.apple.AssetCacheLocatorService.plist
    [killed]    com.apple.awdd.plist
    [killed]    com.apple.coresymbolicationd.plist
    [killed]    com.apple.ctkd.plist
    [killed]    com.apple.emond.aslmanager.plist
    [killed]    com.apple.GSSCred.plist
    [killed]    com.apple.ifdreader.plist
    [killed]    com.apple.installd.plist
    [killed]    com.apple.nehelper.plist
    [killed]    com.apple.periodic-monthly.plist
    [killed]    com.apple.periodic-weekly.plist
    [killed]    com.apple.sandboxd.plist
    [killed]    com.apple.softwareupdate_download_service.plist
    [killed]    com.apple.tccd.system.plist
    [killed]    com.apple.wdhelper.plist
    15 processes killed due to memory pressure
Launch Agents: ℹ️
    [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    [running]    com.adobe.AdobeCreativeCloud.plist [Click for support]
    [running]    com.canon.MFManager.plist [Click for support]
    [unknown]    com.oracle.java.Java-Updater.plist [Click for support]
    [running]    com.sophos.uiserver.plist [Click for support]
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
    [unknown]    com.oracle.java.Helper-Tool.plist [Click for support]
    [running]    com.sophos.common.servicemanager.plist [Click for support]
User Launch Agents: ℹ️
    [loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    [loaded]    com.adobe.ARM.[...].plist [Click for support]
    [loaded]    com.divx.agent.postinstall.plist [Click for support]
    [loaded]    com.kodak.KODAK AiO Firmware Updater.plist [Click for support]
    [loaded]    com.kodak.KODAK AiO Software Updater.plist [Click for support]
    [running]    com.kodak.StatisticCollection.plist [Click for support]
User Login Items: ℹ️
    iTunesHelper    Application Hidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
    Dropbox    UNKNOWN (missing value)
    bomgar-scc-20140103-113305    UNKNOWN (missing value)
    KiesAgent    Application Hidden (/Applications/Kies.app/Contents/MacOS/KiesAgent.app)
    fuspredownloader    Application Hidden (/Users/[redacted]/Library/Application Support/.FUS/fuspredownloader.app)
Internet Plug-ins: ℹ️
    AmazonMP3DownloaderPlugin1017277: Version: AmazonMP3DownloaderPlugin 1.0.17 [Click for support]
    OVSHelper: Version: 1.1 [Click for support]
    Default Browser: Version: 600 - SDK 10.10
    AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 [Click for support]
    AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 [Click for support]
    AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
    DivXBrowserPlugin: Version: 2.2 [Click for support]
    FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
    Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
    QuickTime Plugin: Version: 7.7.3
    Silverlight: Version: 5.1.10411.0 - SDK 10.6 [Click for support]
    SharePointBrowserPlugin: Version: 14.4.7 - SDK 10.6 [Click for support]
    AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
    CANONiMAGEGATEWAYDL: Version: 3.2.0.1 - SDK 10.6 [Click for support]
User internet Plug-ins: ℹ️
    WebEx64: Version: 1.0 - SDK 10.5 [Click for support]
    Google Earth Web Plug-in: Version: 7.1 [Click for support]
Safari Extensions: ℹ️
    Saveonmac
    iMedia Converter Deluxe
    MacVeXe
    DivX Plus Web Player HTML5 <video>
3rd Party Preference Panes: ℹ️
    DivX [Click for support]
    Flash Player [Click for support]
Time Machine: ℹ️
    Time Machine not configured!
Top Processes by CPU: ℹ️
        16%    WindowServer
        11%    SophosAutoUpdate
         8%    com.apple.WebKit.Plugin.64
         8%    Safari
         2%    SophosUIServer
Top Processes by Memory: ℹ️
    120 MB    Safari
    116 MB    SophosWebIntelligence
    43 MB    SophosScanD
    43 MB    InterCheck
    39 MB    WindowServer
Virtual Memory Information: ℹ️
    44 MB    Free RAM
    751 MB    Active RAM
    724 MB    Inactive RAM
    1.21 GB    Wired RAM
    60.34 GB    Page-ins
    819 MB    Page-outs

The minimum requirement is 2GB, but most people think 4GB is the bare minimum.
I primarily buy from Crucial, Other World Computing, or MemoryTen. As long as they have a "configurator" where you pick you exact Mac from a list and it lists all the compatible memory for that Mac, AND it has a lifetime warranty on the RAM, it should be ok. Macs are very picky about the RAM because they use it to its full capacity. If there are any faults in the modules, it will crash.
There are suggestions for sites in other parts of the world on the EveryMac website. Look down in the Section for RAM where you'll find links to their sponsors (OWC is the US-based one).
In Apple's world, there is a difference between and "Upgrade" and an "Update." Updates should generally be installed as they patch vulnerabilities and fix bugs.
Upgrades on the other hand are an entirely new Operating System (OS). A change in the OS can cause many problems with your installed software as it may not be compatible with the changes. It may rely on programming interfaces that have been removed. They should know that they will be removed as Apple publishes those facts many years prior to removing the features.
An Upgrade takes you to a major, new version of software whereas and Update just makes changes to the same major version of the software.
Yosemite was an Upgrade, not an Update.

How do I use my Time Capsule to back up my wife's MacBook Pro running 10.4.

I just installed a Time Capsule. I've extended the range with two Airport Expresses. I've connected my MacBook running 10.6.3 to the wireless network. I've connected my wife's MacBook Pro running 10.4.11 to it. I've connected my wife's 3G iPhone to it and my first gen iPhone to it and our Apple TV to it. All devices can connect to the internet. I've connected the Time Capsule to the printer and printed wirelessly from both computers.
I've backed up my MacBook and seen that the Time Machine is backing up my MacBook as it should.
How do use the Time Capsule to back up my wife's MacBook Pro running 10.4.11? I've tried connecting them via ethernet cable and via USB cable. In both cases the Time Capsule failed to show up as an external drive and wasn't seen by the 10.4.11 back up utility.
How do people do this? (Other than convincing their wives to let them upgrade their MacBook Pro to 10.6.3?)

James Elliott1 wrote:
How do people do this? (Other than convincing their wives to let them upgrade their MacBook Pro to 10.6.3?)
That really is your best option. Sooner or later, you're going to have a problem with the "other" data on your Time Capsule, since the backups of your Mac will, eventually, fill up all the available empty space. That will, of course, limit the space available for the other backups.
There's a very cumbersome workaround in the blue box of #Q3 of the Using TIME MACHINE with a TIME CAPSULE *User Tip,* also at the top of this forum.
Another is to connect a USB drive to the Time Capsule, partition it if desired, and back up one Mac to it and the other to the TC's internal drive.

Wifi functional on MBP running 10.8.5 but not on imac running 10.8.5.

Similar Messages

Maybe you are looking for