WIFI on 2504. Users can't see any computers in "My network places".

Hello. I'm using 2504 CISCO controller and three AIR-CAP2602I-R-K9 access points. So I organized simple WIFI network with AES encryption. Users can easily connect to the proper SSID and after put a login have Internet access.But they just can't see any computers or shared folders on servers in "My Network Places". If I connect any workstation by wire I haven't this problem. So the issue appears only during WIFI access to the LAN.
Please advise, what can I change in 2504 settings.
Thank you.

The WLC doesn't block this unless P2P blocking is enabled. The easiest way to test is to create an open SSID and map that WLAN to an existing wired Vlan. Doesn't tweak the WLAN except for making it wide open. Them associate your wireless client to that new SSID and see if they see the resources.
That is the configuration I was telling you about that you had a screen shot of. As long as that is disabled, you should be able to see the resources.
Sent from Cisco Technical Support iPhone App

Similar Messages

Windows 7 does not see other computers in My Network Places

Hi all,
I have a weird issue with a behavior of Windows 7 machines. The setup is as following: domain with WinSrv 2008R2 DC-s, functional level of the domain is WinSrv2008R2, there are Windows XP and WIndows 7 machines on the network. Users use My Network places
to access shares on other people-s PC's. Everything was fine while we had WinSrv2003 domain controller. After it was upgraded to WinSrv2008R2, Windows 7 machined cannot see all of the computers in My network places. To make things even worse, there are no
rules - some Win 7 machines see others just fine, some see 30 PC's (out of 100), some see all after doing a refresh...all sorts of different situations. I have no idea where else to look. Can it be some DNS setting that I missing? Any help is much appreciated
Dino

Hi Dino,
As I known, by default computer browser service is not started in windows 2008 server and higher OS.
You should enable NetBios over TCP/IP on the NCI settings and start the browser service in the services.msc and it should show you all the list of computers connected on
network.
we should enable Network Discovery in the Network and Sharing Center first.
Please also temporarily turn off firewall on each machine.
In addition, please modify relevant settings on Windows 7 machine.
a. Click Start and open Control Panel.
b. Open "Network and Sharing Center" and click "Advanced sharing settings".
c. Expand the current network profile (such as "Home or Work"), and then select the following options:
"Turn on Network Discovery",
"Turn on file and printer sharing",
"Turn on sharing so anyone with network access can read and write files in the Public folders",
"Turn off password protected sharing"
If the issue persists, try to access another computer by entering
\\computername in the Start Search box. Let us know if it works properly.
For a test, you may also disable IPv6 in adapter properties.
a. Click the Start Button, type "devmgmt.msc" (without quotation marks) in the Start Search box and press Enter.
b. Double click to expand "Network Adaptors".
c. Right click your network card and click Properties.
d. Click Advance tab. High light Speed & Duplex
e. If you would like to use the full functionality, please set the Value to the highest Full.
f. Click OK.
Hope it helps.
Regards,
Blair Deng
Blair Deng
TechNet Community Support

User can't see any free/busy - on one PC only.

Hello,
I have one single user who cannot see the free/buy info of any other user from his normal desktop PC using Outlook 2010.
If he uses Outlook Web App on the PC, it works perfectly.
And if he uses Outlook 2010 on another PC (on a different network sub-net), it works perfectly.
What network dependencies does the free/busy info have please?
Exchange 2010 with Outlook 2010.
Thanks,
- Alan.
(Also posted to Outlook IT Pro forum.)

Hi,
As we know Availability service is responsible to fetch the free/busy details in outlook 2010 where Exchange 2010 is installed.
I suggest to enable Logging of Availability Service, then post the result of log file so that we could dig this issue further:-
How to Enable Logging of Availability Service:-
Start Outlook.
On the
File tab, click Options.
In the
Outlook Options dialog box, click Advanced.
In the
Other section, click to select the Enable troubleshooting logging (requires restarting Outlook) check box, and then click
OK.
Restart Outlook
When Outlook uses the Availability Service to retrieve free/busy information [Try to fetch free/busy for other users to simulate the issue],
log files are generated in the following folders:
%temp%\OLKAS
The file name of the log files uses the following format:
yyyymmdd-hhmmssss-AS.log
For example, a log file that is generated on March 30, 2010 at 2:14:20.0029 P.M. will be named:
20100330-1411200029-AS.log
Post result of this log.
Regards, Sourabh Kumar Jha

Can't see any computers

When I search for computers on my network, for file sharing, I cannnot find any.
When I try to connect to another computer using its IP address, it still cannot connect.
It worked just fine, untill the computer I was transering files from, crashed, and unexpctedly dissconected my mac.
Just so you know, this is the only mac in my house, the other computers are Windows.
In short, it appears the Windows computer messed up my macs file sharing capabilities.

AWESOME!!
Thanks for helping!
Do you know how to make the computers appear under the network folder, automaticly?
It's OK if you can't; I don't use file sharing often, any way.

Can't see Canon MX410 printer in network places

Hi,
I have a Canon MX410 series printer that is cabled to a desktop PC running Windows 7 and is shared by three laptops, two or which are also running Windows 7 and one of which is running Windows 8.1.
At some point, the printer and its attended functions (fax, etc) stopped showing up in Network Places. I also run Collobos Presto on the desktop, but my Ipads can no longer see the printer.
I deleted the printer and all Canon software from all machings and then tried reinstalling the printer on all each using the MX410 CD. I chose a full install for the desktop and a custom install - installing only the drivers - for each of the laptops, but to no evail.
This used to work in the past and I'm uncertain what changed.
Thanks,
s660117

Hi s660117,
It is recommended that you contact live technical support . There is NO charge for this call. Real time feedback of a live technical support call would be very beneficial in this case.
Please dial 1-866-261-9362, Monday - Friday 10:00 a.m. - 10:00 p.m. ET (excluding holidays). A Canon technical support representative will be able to resolve this issue faster.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

User can't see items to add to worksheet

Hello!
I have a problem with some user who does not see any items from business area when trying to create workbook in Discoverer Dekstop.
Environment:
OD:XP Prof SP2
DB: Oracle XE 10.2.0.1.0 Production
Desktop Clinet 10.1.2.48.18
EUL Library 10.1.2.48.18
EUL 5.1.1.0.0.0
The testing scenario was:
created a user in Oracle XE and 4 tables imported in this schema, create joins, indexes... Created 5 users with select granted on this tables. Each user has his own EUL and all can work with no problems except one user. This particular user log into Discoverer Administrator and creates an EUL and Business area. But when the user logs into D.Desktop and tries to create a Workbook, at setp 2 of the Create Workbook wizard there are no items to add to the Worksheet. All the users have the exactly the same clients, privileges and were created in the same way. All off them can work normally in D.Administrator. Any ideas why this user can't see any items from BusinessArea?
Thanks for Your help, Peter

Hi Peter
You might get better luck if you post questions about Discoverer into the Discoverer forum: Discoverer where I am one of the principal answerers of questions.
With regards to this particular issue it sounds as though the user does not have the correct EUL setup inside Desktop.
To check and fix, use this workflow:
1. Log on to Discoverer Desktop
2. When prompted whether to create or open a workbook, click the Cancel button
3. From the toolbar, select Tools | Options
4. Click the EUL tab - it is the last one so you will need to scroll across
5. Look at the value for Default EUL
6. If it is not the one the user created, use thr drop-down to select the right one
7. Click the OK button
8. From the toolbar, select File | Connect to Database and reconnect
9. The user should be able to see the items now
When an EUL is created you have the option of creating a public or a private EUL. If any user creates a public EUL then all users will have access to that EUL but not to the business areas and items in that EUL, not at least until the owner grants access. New connections to Desktop will pick up a default EUL which will be one of the public EULs, and not always the EUL just created by the user on that machine.
Could this be the case with you?
I hope this helps
Best wishes
Michael Armstrong-Smith
URL: http://learndiscoverer.com
Blog: http://learndiscoverer.blogspot.com

Can't see any text members when I use flash 8.

I'm using flash 8 and some of my users are having trouble
seeing my site because they can't see any of the text!!! In some
computers it works ok but some users can't see any text member even
if they upgrade the flash player to 8 version. How do I correct
this!
I had had problems with this when I ran a swf directly, I
couldn't see any text; but when I put the swf into a html file I
can see the text members that the web page has. Why is this
happening!!! This did'nt happend with version mx. How can I correct
this problem!
Please help!
Thanks a lot!
Brenda Sanchez.

just because people say they have flash 8 doesn't mean they
actually have flash 8 have any of them navigated to a flash player
detection site and confirmed they have flash 8? have any of them
right clicked on an embedded swf and confirmed they have flash
8?

My iphone can't see any wifi networks

my iphone can't see any wifi networks ... i tried to reset network setting and reset all setting and update the ios system but no way

I, too, fear it might be a hardware problem . I removed all security from my router but still no networks appear in the list nor can I connect directly by typing in the SSID. Tried two routers: Apple Airport Extreme and a Linksys something-er-other provided by Bell.
I will give HP a call tomorrow and see if they can sort this out.
Thank you for your help/advice!
Edit: almost certain it's a hardware problem: I clicked on the Help button while on that "Scanning for networks" dialog during initial setup and as one of the "helpful" suggestions, it said my Mac address was 00:00:00:etc.

My wife uploaded new fonts to her macbook and now can not see any writing on her screen, can I fix this?

Hi, my wife uploaded new fonts to her macbook and now can not see any writing on her screen, can I fix this?
System fonts deleted accidentally. Does anyone know how I can fix this please?

Thanks Mike,
Absolutely right. I restarted in Safe Mode. This enabled me to see the actual text on the screen. Then I backed up. Then reinstalled. All fixed.
Thanks again,
Chris

Can not see any Data in OKE.OKE_K_FUND_ALLOCATIONS

I am looking in this table with SQLPlus and TOAD and can not see any rows.

Hi Hussein;
First I ran:
select fu.user_name, fr.responsibility_name
, fu.user_id, fr.responsibility_id resp_id
, furg.responsibility_application_id resp_appl_id, furg.security_group_id sec_group_id
from apps.fnd_user_resp_groups furg
, apps.fnd_user fu
, apps.fnd_responsibility_vl fr
where furg.user_id = fu.user_id
and upper(fu.user_name) = upper('&User_Name')
and furg.responsibility_id = fr.responsibility_id
order by 1, 3
Passing in SYSADMIN
Taking this row:
SYSADMIN,General Ledger Super User,0,20434,101,0
I ran:
I ran exec fnd_global.APPS_INITIALIZE (0,20434,101,0);
I still get no rows returned.
Is thier a way in the App to ensure the SYSADMIN,General Ledger Super User can see this data? Or am I missing something else?

Apple TV 3 not seeing any computers on the homeshare but is connected to wifi

I've had this problem for a few weeks now.
I got an Apple TV 3 from my Dad and put it in my new house. Connected it to my Wifi no problems but the problem is that it won't connect to my homeshare - it can't see any of the computers in my house.
It's connected wirelessly, it works with Airplay, I've done all of the diagnostic tests. My homeshare is definitely on, my firewalls are off, the router ports are open, the router has been reset several times, iTunes is left open, the homeshare is set up correctly in terms of usernames etc. I'm just out of ideas on why it won't connect to the homeshare.
I even took it to an apple store - they connected it to their own homeshare no problems so the ATV itself is working properly.
Someone help!

Let's get the troubleshooting steps.
1. Make sure you have iTunes on your computer updated to latest 10.7 version. (applies to both - Mac and PC)
2. Make sure you have your Apple TV updated to latest software 5.1 (Apple TV 2nd and 3rd Generation)
3. Make sure that the computer (with iTunes running) is on the same LAN (Local Area Network) as the Apple TV.
4. Use the same Apple ID on both iTunes and Apple TV (Apple TV can work / switch between different Apple IDs but keep it simple for now)
If you still cannot see your computer from the Apple TV (Computers)
1. Reset your Apple TV
On your remote Hold down Menu and Down, until the Apple TV status light blinks rapidly
2. Make sure you have no antivirus or firewall on your computer that may be blocking access to your computer over LAN.
Let me know if you need detailed info on any of the steps above.

TS3276 Having trouble sending jpeg images as attachments in Mac email.....they go thru as images and PC users can't see the SAVE or QUICK LOOK boxes that Mac mail has. One friend scrolled over the image, right clicked on it and saved as a PNG file.

Having trouble sending jpeg images as attachments in Mac email.....they go thru as images and PC users can't see the SAVE or QUICK LOOK boxes that Mac mail has. One friend scrolled over the image, right clicked on it and saved as a PNG file.

Apple Mail isn't going to change the format of any of your attachments. it isn't going to corrupt them either.
Exchange is a transport protocol and server. The issue you describe is not related to Exchange.
There are many different versions of Microsoft Outlook in use and they all have e-mail bugs. Different versions have different bugs. Some Apple Mail hack to get around a bug in Outlook 2003 may cause the same message to be problematic in Outlook 2000. Fix them both and another issue will cause trouble in Outlook 2007. You can't fix this. Apple can't fix this. Microsoft can and has but that is irrelevant if your recipients are using older versions.
One specific problem is that Apple Mail always sends image attachments inline, as images, not as iconized files. You can change this with Attachment Tamer. Just be aware that use of this software will break other things such as Stationery. E-mail is just a disaster. To date, no one outside of Apple has ever implemented the e-mail standards from 1993. Apple has continually changed its e-mail software to be more compatible with the de-facto standards that Netscape and Microsoft have unilaterally defined and people documented as "standards" after the fact. The e-mail messages that Apple Mail sends are 100% correct and do not violate any of the original standards from 1993 or the Microsoft/Netscape modifications. The problem is entirely bugs and limitations in various versions of Outlook.

Hi. I don't know where my videos go on MAC. I can see all my photos in iPhoto folder, but can't see any video. Is there any other place they go or should i do smth different to find copy them separately? Pls help

hi. I don't know where my videos go on MAC. I can see all my photos in iPhoto folder, but can't see any video. Is there any other place they go or should i do smth different to find copy them separately? Pls help

Try user folder/Movies.

After changing a mail list name in Server end, users can't see the update in outlook client

Dear all,
This is a real issue. I am a Help-desk in a global company and after changing a mail list name in Server end, users can't see the update in outlook client. Even I download Offline address book in full detail, user still can't see the change in her outlook.
Does anyone know how to fix it?
Thanks,
Franklin hong

Hi,
Would you please detail what you did by "changing a mail list name in Server end"? What is the mail list and what server?
If you switch to Online Mode instead of Cached Exchange Mode, does the user see the change?
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Can't see any tumbnails, Can't create proxy.

Hello,
I'm new into the FCS support and I do have a problem now with my FinalCutServer version 1.5.2 running on an Xserver with V-trak.
First of all everything was running correctly but after some one did "propagate permissions" on my root harddrive everything was messed up ofcourse.
I was able to create a back-up of the FCS database (production media and proxy media folders are stored on the V-trak).
I did a complete clean install of the server and FCS and did place back the backup.
Everthing works fine now but the only problem is that I can't see any thumbnails, when I rightclick on an image and click on View Original that all works perfect. When I click in the top and then at the left the landscape looking icon I get the error message that he can't create a proxy.
This also happens with new images that go into FCS.
I did already try to right-click on an image and then Analyze or re-create proxy but none of that works.
Is there anyone who can help me or that have the same issues after restoring a back-up?
Kindest regards,
Luc Janssen
Update: Maybe important to know, my Proxies.bundle is empty.

Sounds like propagating the permissions is what screwed you up, as I'm sure you're aware. That's something that has to be adjusted in the Server Admin app, not in FCSvr. How does FCSvr connect to the storage? Whatever user it's connected as needs to have read/write access to your proxies bundle and also the directory in which it lives. It looks like it doesn't have write access, which explains why it's empty, so proxies/thumbnails/poster frames cannot be generated. Go to the "Search All Jobs" list and see what it says when you try to generate a proxy or thumbnail - I'm guessing you'll see a bunch of FAIL's. Open one of the jobs and look for the error message - I'm betting you'll see something to the effect of "Could not be created: Permission denied."
Permissions changes can really screw your distribution up - I find that permissions issues are what plague my own distribution almost weekly. If you have a distribution where your users have Finder-level access to the storage that FCSvr is cataloging, you may have situations where your users will create folders and files that FCSvr doesn't have write or even read access to, because of various reasons (maybe the user copied the folder/file from elsewhere, maybe their umask is 022, etc). That can lead to wanting to use Server Admin's "Propagate Permissions" functionality, which if used improperly can cripple your entire distribution.
Good luck.

WIFI on 2504. Users can't see any computers in "My network places".

Similar Messages

Maybe you are looking for