Wiki Images Missing with external address

Hey Guys,
We have a issue with a wiki server.
The set up is a mac pro server with 2 partitions. The data partition holds all service data (this should not make any difference). The School is a Department of Education school so is very limited what can be done.
Their internal dns is schools.internal, however they have a external dns record which is wiki.atwellcollege.wa.edu.au. The department has set up a reverse proxy and routed it all through to their internal ip address
Since upgrading to mountain lion images won't display when accessing through the external address, even if they are on the school network. However if you use the internal dns name when at school all works fine.
The other thing I find strange is if you copy a image link and paste to a new web page it changes the url to put the domainname,%20url
eg
This is a wiki page which I have made to be accessable with no password - https://wiki.atwellcollege.wa.edu.au/wiki/projects/xciteimagetest/xcite_image_te st.html
In safari if you right click on the blue question mark and copy image address. You get https://wiki.atwellcollege.wa.edu.au/wiki/files/download/2d891b4a-9127-44e8-b82b -602454b892f0
If you past this into a new page in safari it changes it to - https://wiki.atwellcollege.wa.edu.au,%20wiki.atwellcollege.wa.edu.au/wiki/files/ download/2d891b4a-9127-44e8-b82b-602454b892f0/Casper%20Admin.tiff
Then if you remove the first section "wiki.atwellcollege.wa.edu.au,%20" to leave just - https://wiki.atwellcollege.wa.edu.au/wiki/files/download/2d891b4a-9127-44e8-b82b -602454b892f0/Casper%20Admin.tiff
The image works fine

Assuming all your images are missing, I also assume that all the folders in the Folders Panel are also missing (i.e. with the "?" mark)? In which case it should be a case of right-clicking (ctrl-clicking on Mac) on the top-level folder in the Folders Panel, choose "Find Missing Folder", then navigate to and select the correct folder on your hard drive. That will reconnect everything below, folders and files.
Before doing that, however, it might be sesible to try to figure out why this problem has occurred....if you were on Windows I'd speculate that either the external drive isn't connected, OR Windows has changed the drive letter (which can happen when other devices get connected). In your case, however, your drive is still apparently connected, and as the Mac system doesn't use drive letters, only names, I assume you haven't tried to change that name? What about the organisation of your picture folder hierarchy, have you been changing things outside Lightroom?

Similar Messages

HT202360 Why does email forwarding not work with external addresses?

I have tried to setup an internal email account which is meant to forward emails to an external account.
Under the account's mail options i have set "Mail should be: " to Forwarded and typed in the email address underneath. However, both with an external domain and the me.com domain it does not send the email. If i send an email directly from the accounts using my IMAP account the server has no problems sending the emails to the addresses.
The results of running sudo serveradmin command mail:command = getAutoForward is:
mail:<<id1>>:fwdAddress = "[email protected]"
mail:<<id2>>:fwdAddress = "[email protected]"
mail:<<id3>>:fwdAddress = "[email protected]"
Is there sometime i'm missing?

I have also tried adding a new email account with the [email protected] to see if it was the original account that was the problem, but the new email account doesn't send the emails on either.

How to dynamically display in Image Field with external pic source

Hi Guys,
I have the following scenario:
I need to have a form that needs to display an x amount of images on the same page area. I have not found any documention with regards to creating an undisclosed number of Image Field elements, so I am experimenting with using a Table to display entries of type Image Field.
I do not know at design time which pictures will be shown in this table. This needs to be calculated dynamically when an Incident Number is supplied to the Java WebDynpro application that uses Adobe LiveCycle Designer (Dont worry about this).
Now, first of all: Is it possible to use the URL of images that are OUTSIDE the form structure? In other words, usually one would imbed the image in the forms structure, but because I do not know this image's URL at design time I need to pass it dynamically? Please comment!
Also, what is the FormCalc syntax for accessing a field in the "Data View" view at the left side of the designer? For example, If i want to access the following part in the "Data View"view, what syntax should I be entering in the script editor:
I would like to access this value as I would like to append it to the end of this statement so that I can get the value dynamically:
this.value.#image.href= ???????

You cannot change the url of the image on the fly for security reasons.
In your case you have to use the dynamic image fields in the xdp form, encode the external images with base64 encoding to be a string, populate with those strings the xml and render your template with this xml.
Here: http://eslifeline.wordpress.com/2008/09/05/inserting-image-in-a-xdp/#comments you have a good example by Girish Bedekar for such a process.
Yan.

ITunes Artwork missing with external library

I have a Seagate GoFlex Home and it happens to have an iTunes Library.
So I started putting some of my music onto the drive and when the iTunes do recoginse it, the album artwork is missing. So far I have only put up few albums that I have because I am very picky about my music and I do need artwork. However, when I play a song, the artwork apears in the playing section, but not in the library.

hi,
it will only work when your library could be available.
beside, if I may suggest, it is more reliable to place your library files on your external drive along with your songs than keeping the library files on the internal drive. that way, you will avoid the issue to mistakenly open your library while your external drive isn't mounted.

Can't export images edited with external editor

Images edited within iPhoto '11 export to the desktop without a problem but images that have been edited with an external editor (Photoshop CS4) will not export. The following dialog come up:
Exporting...
Unable to create /Users/<name>/Desktop/
Cancel
Don't know if this has any bearing but the problem is on my wife's iMac, not my MacPro.
Any clues to the source of the problem will be appreciated.

Thanks TD for your input. While I could not get the rebuild to work (it would show 97% done then hang up), it helped me isolate the problem. I ended up deleting all the images that were edited by PS CS4 then tried to do the rebuild again. Still no luck. I then opened the file sans the edited PS images and it worked.
I then edited one of the images using PS CS4 as the external editor and that worked. I then exported the image to the desktop and that also worked. The only think I can think of is that the original edits were done in iPhoto 9.0 and I have since updated it to 9.1. Whatever - it works and the only loss were some edits on a dozen or so family candid shots.
Your help in getting me headed is most appreciated.
Ed

Local machines showing up with external addresses??

I've got one of those problems that suddenly makes me realize how little I understand about the gory details of OS X networking. Any help about the following would be greatly appreciated.
I'm running a "relatively standard" home network environment. That is, I've got a DSL connection to my ISP, and am running a router/NAT environment that connects a number of machines -- Mac, Windows, and Linux -- to the external network. Internally, all the machines have addresses in the range of 192.168.0.x. However, because of the static/NAT address mapping, the machines whose internal addresses are mapped to external static addresses show up at external hosts as 216.xxx.yyy.zzz (the address range assigned to me by my ISP). The other machines, which are on the network via NAT, show up as 66.xxx.yyy.zzz, the address assigned by my ISP. Finally, I'm running a local DNS server that handles addressing issues for my domains and sub-domains that are hosted on local machines. All the machines use this local server for their DNS, with my ISP's DNS server as secondary. All of this is to say that it's more or less a pretty typical configuration, and, in general, everything is working fine.
Here's where it gets tricky:
* Machine A is a Fedora 10 linux box, which hosts an externally visible domain and runs, among other things, a web server. It's assigned to one of the addresses that's mapped to a static IP address.
* Machine B is a MacBook Pro, running Snow Leopard (10.6). It typically runs at 192.168.0.6, which is NOT one of the addresses mapped to a static address, but "just" a NAT address.
Now, suppose Machine B hits the web browser run by Machine A: the log files should show the traffic arriving from the local address, 192.168.0.6. However, it instead shows up as coming from 66.xxx.yyy.zzz, the external NAT-affiliated address. This seems wrong, especially since all the other machines on my network show 192.168-type addresses when hitting the web server.
I now change Machine B's address to 192.168.0.5 -- one of the statically-mapped addresses. Browsing traffic at Machine A is now arriving from 192.168.0.5, which is (I think) as it should be.
I now change Machine B's address back to 192.168.0.6. The web traffic on Machine B is now reported to be arriving from 192.168.0.6 -- NOT 66.xxx.yyy.zzz.
Thus my confusion. It's complicated by the fact that I don't know where to look for the problem. All the log files on all the machines seem relatively normal; there are least no glaring problems screaming out from them. I'm tempted to blame the MacBook, since it's the only one showing the problem, but I'd feel better if I knew what to do and how to fix it.
Any advice out there? This is driving me kinda nuts. Thanks!

Let me first say I think your network is far from 'relatively standard'. :-D
Yeah, you're probably right...
Given that you have two public subnets - 216.xxx.yyy.zzz and 66.xxx.yyy.zzz - do you have two routers? or does one router handle them both?
Just one router. It handles the NAT translations for the machines not on static addresses and the mappings of the statically-addressed machines to the 216 address space. I confess that one of the things I don't understand is how the NAT machines end up on the 66.xxx.yyy.zzz address (externally, the traffic from all these machines appears to be coming from that one address). It's all just part of that internet magic, I guess.
In addition, what else do you change when you change the Mac's IP address? Do you change its router address? it's DNS Server address?
I have two Location profiles set up for the MacBook -- one for 192.168.0.6, and one for 192.168.0.5. I changed the address simply by flipping back and forth between them.
Which machine in your network is handling DNS?
Machine C -- a Mac Pro running Snow and BIND. It's been working quite nicely for quite awhile; it pre-dates by quite awhile the problem with the MacBook.
Re Dave's question above this one: Yes, everything is working; the only practical issue is that I have some ssh restrictions set up that control the ability to log in as different users from different hosts, and the fluctuating IP addresses can mess this up. But, other than that, although I worry that these messages are indicating that something else is wrong somewhere, things generally seem to be working okay. Should I just go forth and be happy?

I want to place an image in my InDesign document that can work with an address like this (\Resources\Thumb) rather than this (C:\Users\JSmith\Desktop\InDesign thumbnail Test\001\Resources\Thumb) is this possible?

I want to place an image in my InDesign document that can work with an address like this (\Resources\Thumb) rather than this (C:\Users\JSmith\Desktop\InDesign thumbnail Test\001\Resources\Thumb) is this possible? In a nutshell I want to point the link to an image in a directory that uses just part of the address.

I know this is something you can do in Maya with linked files. I guess InDesign just isn't there yet.
MW Design - Yeah I think "Relative paths" is the right term! I want to create a Layout with an image in the center of the page - and then duplicate my folder structure with that file. With that, I want to replace the Linked image file with a diferent image file of the same name. In effect having multiple files of the same layout with different images. I hope that made sense.

CCR Error 154 - Planned Order Missing in R3 with External Key

Hi Experts,
We have duplicate orders generated for E Type products at a particular locations. When I went into the CCR then one error was observed - Planned Order Missing in R3 with External Key (CCR Error 154). And all the duplicate orders which were of PPDS Orders only came into the CCR log.
Request you all that if anyone has any information regarding this then please reply.
Thanks and Regards
Joseph

Hi,
This error occurs in cases where order is deleted in APO and not deleted in R3.
Reason and steps to be followed in CCR:
Orders once deleted in APO wil have change pointer R and orders created in APO which has to flow to R3 will be having change pointers C.
In this case you need to follow the steps mentioned below.
step 1 select change pointers icon x then do iteration . This will delete the orders in R3 and bot R3 and APO will be in sync.
w/o selecting change pointers icon X if we do the iteration you will get PPDS planned orders in APO since orders to be deleted in R3 is not actually deleted and flow back to APO and hence you will have duplicate orders.
step 2 select orders with change pointers C , seletc the change pointers icon X and do the iteration.
This will publish the orders in R3 and will return back to APO.
In your case step 1 was not followed and hence you are getting duplicate orders.
Thanks,
nandha

Missing element To when using SOAP 1.2 with WS Addressing 1.0 in Response

Hi,
I'm developing WCF using SOAP 1.2 with WS Addressing 1.0 between Windows Server 2012 and JAVA client Oracle JAX-WS 2.1.5.
The Request from the client contains the element <To>, but the Response from the Server somehow will ignore that element, which is required for the client, even I tried to add manually.(refer to http://stackoverflow.com/questions/15808852/how-to-correctly-implement-custom-soap-1-2-headers-and-ws-addressing-in-a-wcf-se)
Is this normal behavior that the Response will ignore the element <To>?
And is there another way to add the element?
Thanks.

I'm developing server side service using .net framework 4.0.
Microsoft Service Trace Viewer shows that in ServiceLevelReceiveRequest the element <To> is exist, but then it is gone in the following step, ServiceLevelSendReply, and TransportSend.
Thanks.

How do I move images from my external back to my computer?

Approx. 6-7 months ago I moved all my images to my external hard drive and worked from there. I've since upgraded to a much larger internal hard drive and want to move them back. I intially moved them via finder and Lightroom would say that the images are offline (obviously). I'm not quite certain how to point Lightroom to the files. What should I do?

2 prefered solutions:
Move the top level folder(s) from within LR (drag/drop each folder). This way, LR will keep track of the image locations
Move the top level folder(s) in finder, then open LR and chose "Find Missing Folder ..." on the top level folder(s) which show a "?".
Both options are best performed if you only have a few (best is one) top level folder with all your photos.
Beat Gossweiler
Switzerland

R&R Backup (Image) on two external USB drives

Hi Forum,
in the early BIOS state of my T500 and working with Vista I had to rebuild my system several times due to OS failures. For that reason I periodically run R&R and make images on an external USB drive.
Since I'm traveling very much I always have the USB drive with the image with me. The drive contains one basic backup and some incremental backups up to level 25 (at the time being).
Now my goal: in case of a theft or a failure of that USB drive, I want to keep a second image on another USB drive at home.
Now my questions:
1: Is it possible to make backups with R&R (basic and incremental) of one computer on several USB drives?
In that case R&R must detect which incremental level is present on the USB drive and create the appropriate backup (management of the levels on the USB drive, not on the computer).
Example: USB drive A contains one basic backup and some incremental backups to level 12 (consistent) - USB drive B contains one basic backup and some incremental backups to level 17 (consistent as well).
2: If the answer to question 1 is "yes" - does R&R manage this automatically in the windows interface or is it necessary to use the DOS level (rrcmd.exe). Which switches are to be set?
Many thanks for help
Axel

It is a difficult question: the help file isn't entirely clear.
Here is my recent experience: using R&R 4.21 I had backed up my machine to the internal drive + 1 external USB drive several times, so that there was the base back-up and several incrementals on both drives. I also had copied the base backup + earlier incrementals to DVDs using the advanced menu entry for that task, just to be on the safe side. And, using another program (the free version of Syncback by 2BrightSparks), I regularly duplicate documents + pictures to the USB drive, so I'm covered in 3 different ways on 2 types of external hardware.
On one or two occasions I did an incremental backup on the internal drive only--but the next time I did an incremental with the external USB drive attached, the missed incrementals were synchronized onto the external drive.
Now, 2 weeeks ago I decided to zap the main disk and rebuilt the OS + programs to have a "clean slate" for 2010. When I had finished reinstalling everything minus personal files, I made a base backup (the only choice offered) on the internal drive with the external drive attached. This effectively erased the existing earlier backups on the external drive and copied over the new base backup.
So this synchronization only operates in one direction: the external USB drive's store of R&R backups is a replica of what is on the main internal drive.
I strongly suggest trying this all out (i.e. missing an incremental backup on the external drive, then making sure it has catched up after the next incremental backup) after making an external copy on DVD of the R&R backups. In fact, if you have the nerve, the patience and the time (and the DVD backups!), you should also try a bare metal restore of the DVD backup (I did last year when I bought this machine and hadn't too many personal files on it-- R&R 4.21 does actually work!)
sorry i can't be more specific, but my advice is to practice the "disaster recovery" at least once, early on, in order to be sure how it works if disaster does strike.

16bt files with external editor

Am I missing something very obvious?
No matter what I do, I am unable to export to external editor (photoshop) and have them open as 16bt files. They always open as 8bt.
What am I doing wrong?

No, you are right. My nice 16 bit file goes to 8 bits
when opened in the external editor. Needs to be fixed.
Needs to be fixed and we should not be forced into Adobe RGB (1998)! What if the scene gamut exceeds this? I can’t get ProPhoto? Or the scene gamut is much smaller but I want 16-bit sRGB?
Is there any logic in how Aperture is providing this encoding? Again, I suspected it was based on the EXIF data the camera writes to the RAW file based on the matrix. I’m lazy but should set my Canon to sRGB, shoot RAW and see what Aperture thinks it should use. But that doesn’t matter because having only sRGB or Adobe RGB (1998) doesn’t cut it.
Why not allow us to setup as we do with Export how we want the Open with External Editor to handle all this?
From a color management perspective, this application is hopeless lame. Hard to believe it’s from the company that started the ICC and introduced ColorSync. We can’t control the rendering intent for output color spaces. The Histogram doesn’t tell us squat about the rendered image and there’s no RGB info palette (that again should tell us the values AFTER we produce a true RGB image. How can they call this a Pro tool?
Message was edited by: digitaldog

Editing with External Editors

Heya folks, a quick query as i suspect ive probably missed something, i have Pixelmator installed as a cheaper image editor with much of the functionality of Photoshop, and i want to use it as my external editor. How do i go about doing that? I go to Images > Edit With> but the option for external editor is greyed out.
Any ideas?
cheers
Rowan

from page 350 of the user's manual:
To set an external editor in Aperture:
1 Choose Aperture > Preferences, or press Command-Comma (,), then click Export.
2 Click the Choose button below the External Image Editor field, navigate to an
application in the Select Application dialog, then click Select.
The application’s name appears in the External Image Editor field.
3 Choose the appropriate 16-bit file format (TIFF or PSD) from the External Editor File
Format pop-up menu.
This is the file format Aperture uses when opening files in external editors.
j

RETURNED MAIL WITH MY ADDRESS NOT SENT BY ME?

Received 3 emails today, all with similar addressing but from different systems. All included my email address as the
return path but usually with an
unknown name listed with my email address. Any help on why this is happening and what this is appreciated. Below is a
summary of the email with my address removed. I noted that my IP was not in any part of these emails...
This is the mail system at host hm995.locaweb.com.br.
I'm sorry to have to inform you that your message could not
be delivered to one or more recipients. It's attached below.
For further assistance, please send mail to <postmaster>
If you do so, please include this problem report. You can
delete your own text from the attached returned message.
The mail system
<[email protected]>: host cdptpa-smtpin02.mail.rr.com[75.180.132.244]
refused to talk to me: 554 5.7.1 - ERROR: Mail refused - <201.76.51.156> -
See http://www.mail-abuse.org/cgi-bin/lookup?201.76.51.156
Reporting-MTA: dns; hm995.locaweb.com.br
X-Postfix-Queue-ID: 1ECB057AA1C7D
X-Postfix-Sender: rfc822; amyan***@mac.com
Arrival-Date: Sat, 31 Jul 2010 08:01:35 -0300 (BRT)
Final-Recipient: rfc822; [email protected]
Original-Recipient: rfc822;[email protected]
Action: failed
Status: 4.7.1
Remote-MTA: dns; cdptpa-smtpin02.mail.rr.com
Diagnostic-Code: smtp; 554 5.7.1 - ERROR: Mail refused - <201.76.51.156> - See
http://www.mail-abuse.org/cgi-bin/lookup?201.76.51.156
From: Jennelle Tighe <@mac.com>
Date: July 31, 2010 7:01:34 AM EDT (CA)
To: [email protected],[email protected],[email protected],jackie.shaw4@ntlwor ld.com,[email protected],
[email protected],[email protected],[email protected],grea [email protected],[email protected]
Subject: [SPF:fail] cunningham.alan sgranato
http://snipr.com/zzvxc
Message from yahoo.com.
Unable to deliver message to the following address(es).
<[email protected]>:
This user doesn't have a yahoo.com account ([email protected]) [0]
--- Original message follows.
Return-Path: <
Received-SPF: softfail (mta1142.mail.sk1.yahoo.com: domain of transitioning does not designate 201.76.51.159 as permitted sender)
X-YMailISG: q9V8txgcZApmSlNeYOOXLfMX8TOFOY_1uiuaiiP5wPDE0jUg
4UmUQldoccccVjHzzkTW3dDJekNwKkCGsSkTL8H3D7_0DuV7P6HDLJ652ylv
QyD0d08BJq7apaQgnekuLQPSiq4GVxRykfxumsg.thXY8HbaaO_LDbpjHLrq
wUM9tyWFIBDYOkF4OYhTTTod1eUs8KFZCbaDWxL3DDcjOe9aLhf5wM6HpN
IH.aPpHLVEVzxWkt3BE99Lms5ZAnzlTrXGdZeZMoml3wvygYdy70JY.j62
HVykt7lTdYK7hkgKCDIU2ZohE6D6k4VgCLHfG.lWTsK.iD_4CgG3DabGej7a
v3xSS1qx3SH2NtoaBXi9dFzgjP2PvwDodw3MZ_minTL7ctsnnhGAV2ppUVYj
wwBoOMJCUqdGuUlfquAhyYyrKaPiVnF19EW7L0jxhybaKVn3QlsU0pO33LFK
twUd3iEVzTi8alNinIWbMQDR7j6IxRUVjtYfbBnCNfH3nAL2UastSDWNtSne
c12SCBVHrJ.aeJpOe.JwiaRsmNHfsIFhMcs32Ji1tiq.WJPE7e3Sqkpf3XJI
QxoFdso95VzMubbJBUHnJQ0kkEPs9e8VwMwf.6jUQfnBBRvW73sFnm_BkiHN
9mq6hflNYTdRCSOF
X-Originating-IP: [201.76.51.159]
Authentication-Results: mta1142.mail.sk1.yahoo.com from=mac.com; domainkeys=neutral (no sig); from=mac.com; dkim=neutral (no sig)
Received: from 127.0.0.1 (EHLO smtp-shared-995.locaweb.com.br) (201.76.51.159)
by mta1142.mail.sk1.yahoo.com with SMTP; Sat, 31 Jul 2010 04:01:36 -0700
Received: from hm995.locaweb.com.br (smtp-shared-995.locaweb.com.br [201.76.51.145])
by smtp-shared-995.locaweb.com.br (Postfix) with ESMTP id 22E7B57AA1CC0;
Sat, 31 Jul 2010 08:01:35 -0300 (BRT)
Received: from hm741.locaweb.com.br (hm741.locaweb.com.br [200.234.200.125])
by hm995.locaweb.com.br (Postfix) with ESMTP id 1ECB057AA1C7D;
Sat, 31 Jul 2010 08:01:35 -0300 (BRT)
Received: by hm741.locaweb.com.br (Postfix, from userid 896)
id 10DC71A5BD1; Sat, 31 Jul 2010 08:01:34 -0300 (BRT)
X-Locaweb-ID: 63325679646D56794F69426F625463304D53357362324E68643256694C6D4E76625335696369776 764584E6C636D356862575536494
74E796458706C61584A765A47397A6457777559574D3D
To: [email protected],[email protected],[email protected],jackie.shaw4@ntlwor ld.com,[email protected],
[email protected],[email protected],[email protected],grea [email protected],[email protected]
Subject: [SPF:fail] cunningham.alan sgranato
X-PHP-Script: www.cruzeirodosul.ac.gov.br/xlancyber/imagens/img/list.php for 212.117.165.179
From: Jennelle Tighe <
Message-Id: <[email protected]>
Date: Sat, 31 Jul 2010 08:01:34 -0300 (BRT)
X-Virus-Scanned: clamav-milter 0.95.1 at hm995
X-Virus-Status: Clean
X-SPF-Scan-By: smf-spf v2.0.2 - http://smfs.sf.net/
Received-SPF: SoftFail (hm995.locaweb.com.br: transitioning domain of
does not designate 200.234.200.125 as permitted sender)
receiver=hm995.locaweb.com.br; client-ip=200.234.200.125;
envelope-from=<; helo=hm741.locaweb.com.br;
<a class="jive-link-external-small" href="http://">http://snipr.com/zzvxc
* MESSAGE TRUNCATED *
<Edited by Host>

I don't think they need an IP, If I were to send an eMail that had your addy spoofed, when it git returned it would get returned to you.
If you don't recognize any of those names in the TO: line, then no worry, you just ignore the thing... I doubt you have any worries, & even less control of these things.
EDIT:
http://en.wikipedia.org/wiki/E-mail_spoofing
http://www.windowsecurity.com/articles/Email-Spoofing.html
Message was edited by: BDAqua

A Better Way to Edit RAW with External Editor?

The settings for the external editor will only let you edit the images in Tiff or PSD, I want to edit the RAW image itself. The only way I know how to do that is expert the master, edit it and then import it back in.
This is a hockey workflow and frustrating especially when I then do a quick fix in Aperture itself and then want to edit the image again externally in GIMP.
I just want to edit the RAW image in my external editor when needed, yet do my folder management within Aperture.

I was afraid of that...
I don't use lightroom or Photoshop. I used to be a Photoshop user until the cost became so prohibitive. I have since switched to using GIMP as my eternal editor, it's native files are .xcf (musch like the Photoshop .PSD) but Aperture doesn't support .xcf files and I doubt they ever will since GIMP is a free open source tool, rather than a commercial product.
I have been playing with 3.01 now for a few days and finding that the heal tool and burn and dodge tools seem to be improved. Even though in GIMP they were destructive to the original RAW file those items were noticeably better in the external editor.
Also, any extreme editing still needs to be done outside of Aperture, so I will take a Catapult or just keep my current workflow....

Wiki Images Missing with external address

Similar Messages

Maybe you are looking for