Missing element To when using SOAP 1.2 with WS Addressing 1.0 in Response
Hi,
I'm developing WCF using SOAP 1.2 with WS Addressing 1.0 between Windows Server 2012 and JAVA client Oracle JAX-WS 2.1.5.
The Request from the client contains the element <To>, but the Response from the Server somehow will ignore that element, which is required for the client, even I tried to add manually.(refer to http://stackoverflow.com/questions/15808852/how-to-correctly-implement-custom-soap-1-2-headers-and-ws-addressing-in-a-wcf-se)
Is this normal behavior that the Response will ignore the element <To>?
And is there another way to add the element?
Thanks.
I'm developing server side service using .net framework 4.0.
Microsoft Service Trace Viewer shows that in ServiceLevelReceiveRequest the element <To> is exist, but then it is gone in the following step, ServiceLevelSendReply, and TransportSend.
Thanks.
Similar Messages
-
ORA-00907: missing right parenthesis when using group by clause with xmlagg
I have the following query and I am getting ORA 00907 Error when I am using group by clause with the xmlagg function.
select xmlelement("Mitigation",
xmlelement("m_szMethodName",tm.DisplayName),
xmlelement("SubstanceInterferenceProtocolList",
(select xmlagg(xmlelement("MitigationProtocol",
xmlelement("m_szMethodName",tm.DisplayName),
xmlelement("m_szInterferenceProtocolName",tmp.protocol_name),
xmlelement("m_szInterferenceSubstance",tmp.intf_mtrl_prod_code),
xmlelement("m_ProtocolParameters",
xmlelement("m_szProtocolName",tmp.protocol_name),
xmlelement("m_Consumables",
xmlelement("Consumable",
xmlelement("m_szConsumId", xrl.rgnt_pack_name),
xmlelement("m_szProductCode",xrl.pack_prod_code),
xmlelement("m_nVolume",tmp.fluid_vol),
xmlelement("m_szProtocolStep",xps.protocol_step_name))),
xmlelement("m_ProtParamList",
xmlagg(
xmlelement("ParameterValues",
xmlelement("m_szProtocolName",tmp.protocol_name),
xmlelement("m_Time",xpsd.parameter_ntime_value))
group by tmp.ccd_test_id,tmp.intf_mtrl_prod_code)
order by tmp.ccd_test_id, tmp.intf_mtrl_prod_code, xps.protocol_step_intprotocolstep )
from XPR_tdef_mitigation_protocol tmp, xp_reagentlist xrl,
xpr_protocol_settings xps, xpr_protocol_settings_default xpsd
where tmp.ccd_test_id = tm.ccd_test_id
and tmp.ccd_test_id = xrl.ccd_test_id
and tmp.pack_prod_code = xrl.pack_prod_code
and tmp.intf_type = 1
and xps.protocol_name = xpsd.protocol_name
and xps.protocol_step_name = xpsd.protocol_step_name
and xps.ps_action_parameterlist = xpsd.ps_action_parameterlist
and xps.protocol_name = tmp.PROTOCOL_NAME
from XPtoXPRTdef_defn_mapping tm
where tm.DisplayName = 'SYPH'If I remove the xmlagg clause along with the group by clause, the query runs fine and give me the output.
But in that XML format of the output is incorrect for my application.
Could someone help here?Hi,
userAtoZ wrote:
I have the following query and I am getting ORA 00907 Error when I am using group by clause with the xmlagg function.
... xmlagg(
xmlelement("ParameterValues",
xmlelement("m_szProtocolName",tmp.protocol_name),
xmlelement("m_Time",xpsd.parameter_ntime_value))
group by tmp.ccd_test_id,tmp.intf_mtrl_prod_code)Please don't post unformatted code. When posting any formatted text on this site, type these 6 characters:
\(small letters only, inside curly brackets) before and after each section of formatted text, to preserve spacing.
If the code above were formatted well, so that you could match each '(' with its closing ')', it would look something like this:... xmlagg ( xmlelement ( "ParameterValues"
, xmlelement ( "m_szProtocolName"
, tmp.protocol_name
, xmlelement ( "m_Time"
, xpsd.parameter_ntime_value
group by tmp.ccd_test_id
, tmp.intf_mtrl_prod_code
This is exactly what you posted, only the whitespace has been changed.
This makes it clear that the GROUP BY is inside the parentheses with the argument to XMLAGG. You can have an ORDER BY clause there, but not a GROUP BY clause. -
I have just updated to OSX10.10 Yosemite and now Elements freezes when using spot healing or clone stamp.
If you are using track pad, please use mouse and see if your issue is resolved.
Moreover, this issue has been resolved in PSE 13. You can give it atry as well.
Thanks!! -
When using facetime having difficulty with video.msound is ok. Screen says reconnecting
There have been numerous reports of FaceTime problems for the last several days and it is unclear what the cause if. Following is one of many discussions of the issue: https://discussions.apple.com/thread/6096640?tstart=120
-
Hello!
We have the following problem:
LabView (8.2) hangs when using I/O operations with traditional NI-DAQ 7.4.4 after aborting LabView program
We freshly installed LabView 8.2 (2006) and NI-DAQ 7.4.4 on a PC running Windows XP (Service Pack 3). We built a larger vi that remotely controls a traditional NI-DAQ card (AT-AO-10) on a second PC via NI-VISA 5.0.3. We were successfully running this program until a power failure caused the first computer to crash. After this crash we were unable to start the program again: LabView freezes while loading the vi. LabView itself can be started but freezes when adding I/O operations from the NI-DAQ palette to a block diagram.
We have tried to re-install NI-DAQ 7.4.4, but it did not help. We then re-installed all NI software, but still no improvement. In the end we decided to reinstall ALL software, first Windows XP, then LabView and finally NI-DAQ 7.4.4. This worked. However, after a few days of running the program we had to abort LabView via Windows Task manager and afterward we again experienced the same problem as before: LabView freezes when loading the program.
Obviously, we cannot afford to reinstall Windows every time. Are there any known Windows XP / NI-DAQ issues that might cause the freezing of LabView? We would be very grateful for any idea.
Best regards,
MatthiasHello Sprice,
Browse the shipping examples according to “Directory Structure” and then select
DAQ to find the Traditional DAQ examples.
There a lot of examples that are written for counters (Counter >>
daq-stc.llb >> Count Edges (DAQ-STC).vi).
What kind of signals are your photons creating? Are they TTL compatible at a certain
frequency? You don’t care about overwriting
your buffer?
Respectfully,
Rob F
Test Engineer
Condition Measurements
National Instruments -
How to numberformat when using sql:query alogn with c:forEach JSTL tags
Is there anyway to format the numeric values returned from the database when using <sql:query> alogn with <c:forEach> tags
Here is my jsp code
<sql:query..../>
<c:forEach var="row" items="${queryResults.rows}">
<tr>
<td><c:out value="${row.COL1}" /></td>
<td><c:out value="${row.COL2}" /></td>
</tr>
</c:forEach>
Col1 values are numeric without any formats Eg: 1000, 10000, 1000000 etc.
how can i format them to 1,000 , 10,1000 , 100,000 etcIt is polite to mention what your answer was. These posts are not just here for you to ask questions, but to be used as a resource for other people to find answers. Saying "I solved it" with no details helps noone.
I presume you discovered the JSTL <fmt:formatNumber> tag? -
When using printer Epson R1900 with Aperture 3 and if I mistakenly choose the wrong paper such as, epson's luster instead of glossy, does that change the exposure? Like make it too dark one or two stops!
Hi,
If you choose the incorrect settings for printing, yes - the print quality will be affected.
Different papers absorb the ink differently, so you can end up with prints that are too light, too dark, or have a colour cast if you make incorrect choices in your Aperture or printer settings. -
when using apple bluetooth keyboard with iPad, hitting the enter/return key while typing in iMessage only adds another line not 'send' the message? is there a setting to change that somewhere?
Everywhere that I've checked it is not possible to do this. I would like to even do this using the vkb. I hate having to stretch my thumb all the way up just to send a message. It's messaging, not a report or email. Seems backwards. Hopefully some day Apple can add this option.
-
I get the following error message in Windows 7 "Sand Box has stopped working" when using System Exec.vi with wait until completion set to true, if I set it to false there is no error message.
Hello JJVerdi
mmm well System Exec.vi simulates a DOS command window, can you run the sandbox from the cmd window using the same commands without any errors?
you may take a look to this KB, it may be related to your issue:
http://digital.ni.com/public.nsf/websearch/2393462BD57B854186256C4F007B706A?OpenDocument
Regards
Mart G -
When using i-Cloud PAGES with another shared person who is a collaborator, how to you shift ownership control of the file to the shared person who started as a collaborator and needs to take over file ownership responsibilities?
Thanks, but I have searched here but have not found or heard a direct answer to my question as stated above...
-
I'm trying to import contacts from Outlook to Mac address book. I've exported as a CSV but when I try to open with the Address book import tool, the file is greyed out and can't be imported. Any ideas?
Thanks,
IanIf you can't get the exported .csv file to work you might consider using Migration Assistant: http://support.apple.com/kb/HT2518, particular if you need to move more than just your contacts. There is some granularity in the options on what to transfer but I'm not sure if you can choose to just your migrate contacts.
-
Missing Search Field when using 3.1 Create App Wizard ?
Hi
2 points which look like bugs to me;
1 - In all previous versions whenever I used the create app wizard to build up a list of pages, reports always included the 'search across any varchar field' funtionality. This seems to have disappeared when using the Classic form of reports. It is obviously there if you use an Interactive report.
2 - Again when using the Create App wizard, if I use the Classic form (in order to be able to also 'Generate Analysis Pages') these do get built, but not linked in any way (tab, list region, button etc) to any other pages. I can link them myself, but I am demonstrating APEX here and it doesn't look so good....
Can someone just quickly confirm I am not going mad here ?
JulesHi Jules,
You're not going mad! I've reviewed the behaviour of the Search field and the Analysis Pages link using releases 3.0.1 and 3.1.1, and there is a difference in behaviour between the two versions.
Classic Reports generated via the Create Application Wizard in 3.1.1 should have a Search text field above the report region, however this field is missing. I've logged bug 7185486 for this issue. Classic Report&Forms generated via the Create Application Wizard, with the "Include Analysis Pages" option selected, are missing a link to the Analysis pages in 3.1.1. I've logged bug 7185486 for this issue. I've updated both bugs with a workaround. A fix for these issues will be available in a future release. Thanks for bringing these two issues to our attention.
Regards,
Hilary -
Scroll Motion Elements Shake When Using Anchors
When the browser window is narrower than the site, elements with scroll motion "shake", often severely, and sometimes change position when using links to jump to different anchors on the page. What causes this and is there a way to fix it?
Here is the site I'm working with. If you scroll using the scroll bars, there is no issue, it only happens when using the links in the bar at the top. Any ideas? Thanks.
http://cuberogroup.businesscatalyst.com/Hi @Kydos
Thank you for your reply.
I grasp that if you disable the graphic driver in device manager the issue is gone.
Here is a link to Resolving Video and Graphics Issues that will assist with this.
Have you tried running the HP Support Assistant to look for any HP updates?
Here is a link to the HP Envy 17t-1000 CTO Notebook Software & Drivers to verify you have all the recommended updates.
You could also try reseating the card if that does not help.
Next would be to test the card. Testing for Hardware Failures (Windows 7, Vista)
Good Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping! -
Labview misses a read when using Ni USB 8473 can interface
I was wondering if anybody here has had experience with this problem... I already talked to a Labview tech but i have not received an answer yet...
This is my problem..
I have a program that when a button is pressed, it initializes a can interface to CAN0 for example, then it writes... then it waits about 100mills and then it reads... My computer is connected to a simulator through the USB 8473 interface (I have the problem when I connect it to the hardware I am going to use), and everytime I write, this simulator sends a response... The problem is that sometimes I don't see a response... I have made sure that the simulator responds so I know it is responding... I have changed the waiting time before the read from 1 mills to 100 mills to 1 second, and still with the same result...
The way I have fixed this problem is by reading multiple times (3 times)... so every time I send a request, i wait 100 mills... then I read once, wait 25 mills, then read again, wait, then read again....
So, I wanted to know if anybody here has had to do this in order to get around this problem...???
The reason why I was asking this is because I also have another application that has to monitor my hardware by sending requests every 100 milliseconds... so I have two loops, once that writes requests every 100 mills... and another that reads the responses every 20 mills... but sometimes it looks like eventhough i read this many times, I still miss some frames, which are caught later but still not good enough...
I have posted a different thread about the above problem...
If you have questions just ask please...
ThanksYes, by Labview tech i meant NI Support... sorry about that...
I am still waiting for them on this subject...
I'll attach a simplified version of my code (the only difference between this code and the original is that i parse all the data that i get...)
I am attaching these if a couple replys...
Run the receive and respond (simulator) then run the CAN_PROBLEM vi... click on the OK button to write then read... you can tell it missed the message when the Frames to Read field is 0...
how are you sure that you device is sending a response?
Very sure... 100%... the original simulator lets me know when it sends the response...
Can you run bus monitor on another port, ie another USB-CAN device?
I did that, and the other USB-CAN gets it... the program I am running on the other computer is called CANyliser... I think that program waits until there is something in the queue (which I am not doing with mine)... I am just reading after I have wrote teh message (reading after about 100 mills I wrote)... So I am assuming that's plenty of time... i have increased this waiting time to 1 sec and still get the same behaviour...
Attachments:
CAN_PROBLEM.vi 16 KB
ReceiveAndRespond.vi 17 KB
CAN INIT.vi 23 KB -
Question: Application error when using SOAP sender
Hi,
I got the following error when calling SOAP sender:
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="UNKNOWN">APPLICATION_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>application fault</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="http://xml.apache.org/axis/">hostname</SAP:ApplicationFaultMessage>
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
The return message is:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Adapter
-->
<ns2:hostname xmlns:ns2="http://xml.apache.org/axis/">gdcn-admin</ns2:hostname>
From the runtime monitor, it shows:
SOAP: response message contains an error Application/UNKNOWN/APPLICATION_ERROR - application fault
Actually I maintained the host name in file hosts. And with XMLSpy, I can directly connect the Webservice successfully, but with XI, it stops me at this point. It seems the connection has been established, because if the WebService is stopped, I will get error HTTP 0 Null, If it's started, I get the above problem.
Could you please provide the hints.
Thanks a lot!
Best Regards
YuedongHi,
I found the problem:
It's because of the wrong format of message. the message is created with a WSDL file generated by external development system, but it's not correctly explained by XI. I manually created the messge (request & response), then it worked.
Actually the error has nothing to do with hostname. it means the host returns application error (but unfortunately there is no detailed information).
Thanks a lot for your kindly help!
Best Regards
Yuedong
By the way, how can I reward the point?
Message was edited by: Yuedong Chen
Maybe you are looking for
-
How do i back up my iphone 4s to my itunes accout?
-
How to get the unicode escapes for characters outside a characterset
Hi! I'm tryiing to edit into a RTF file and have been fairly successful so far. But living outside the U.S i need some characters outside ASCII. Those characters are supposed to be escaped as unicode-escapes, eg \u45. But I can't find a way to get th
-
I exported a playlist from iTunes to a cd but when I want to import it again, I get error messages on files with non-character symbols in them. Cannot copy 024 Don't You Want Me?: The filename, directory name or volume label syntax is incorrect. Obvi
-
I go to Layout, sometimes it works, other times, it doesn't make the change. I'm using version 3.04. Thanks!
-
Https call using a http binding in soa
Hi, I am trying to do an https call using soa suite 11g.I am using http binding for the same: Below is the url I am trying to call https://test.b2b2.rbs.gxs.com/invoke/URLTest/simpleReceive Below is the header which needs to be passed to the call <He