Will there be raw support for the Canon G10 before CS4?

Not complaining, just asking. I'll upgrade to CS4 eventually, probably sooner if my G10 is not convered in CS3/ACR.
Richard Southworth

Some it is definately that Adobe wants to make you upgrade, they need the
money like all businesses need the money. Anyone that thinks otherwise is
deluding themselves. However, the other part of it too is that with each new
version of Photoshop they add many new features to ACR, not just camera
support but new features. To upgrade the old version of ACR the last one for
CS3 for example they would need to maintain two seperate code bases and that
is a lot of work, that is going to increase the possibility of bugs and
other problems. It is far easier for Adobe to do it once and that is it.
This is why Lightroom and ACR are by and large updated together and why they
share the same code base, they only have invent the wheel once.
Now I am sure there is little reason why Adobe couldn't just make 5.1 work
with CS3. But, that goes back to the whole money thing. I guess you could
say ACR is a privilage and not a right. You earn the privilage to use the
lastest ACR by keeping your updates current.
This time around however, I have to say that Adobe did something that I
approve of very much and that is they release ACR 4.6 for CS3 AFTER CS4
shipped adding support for newer cameras. I would like to see Adobe do this
all of the time. That is do one final ACR update for the previous version of
Photoshop after the new version has shipped. I see this as a sort of thank
you.
Robert

Similar Messages

Will there be raw support for the Canon G10 before hell freezes over?

I know, patience. Just gripes my soul the P6000 made it and the G10 didn't. Sigh.
Richard Southworth

<[email protected]> wrote in message news:[email protected].. > Yes Eric, I understand there's no useful purpose to my post, just > catharsis. > > Richard Southworth Then there is a useful purpose to your post. Stress releif saves lives! Robert

Hi there, when will there be a support for the Olympus PEN E-PL7?

Hi there, when will there be a support for the Olympus PEN E-PL7?

It is on our radar and hoping to add it in an upcoming update.
As soon as it is available, it will be updated in the below article. Camera Raw plug-in | Supported cameras
~ Arpit

When will Aperture provide RAW support for the Nikon D4s?

Just got my D4s and can't work with the RAW files in Aperture 3 ... It says 'incompatible file format'...

Wait and see, the currently available raw support is here.
http://www.apple.com/aperture/specs/raw.html
iMac, Mac OS X (10.7.5)
But even, when the raw supoort for your new camera will have been released, it will probably only be available for you, if you upgrade to OS X Mountain Lion 10.8.5 and at least Aperture 3.4.5. The most recent Digital Camera Raw Support releases have all been released for these versions only: http://support.apple.com/kb/DL1734
Give Apple a little time to do a decent job with the raw support. Your new camera is particularly challenging with the high ISO sensor and the excellent low light sensitivity (ISO 409,600). You will want that the raw support can deal with these new features properly. Last year we have seen quite a few threads with complaints about strange blueish or pink colors on raw images taken in low light for new Nikon and Canon cameras.

Will there be driver support for the 8600m GT under Windows XP?

Hi!
I would like to run Windows XP on my Santa Rosa Macbook Pro. I know that with Bootcamp 1.3 you get drivers for the 8600m GT - the thing is, that those drivers do not seem to be optimised, for the 3dMark 06-test scores pretty low (no more than 10fps in most tests).
Nvidia does not develop drivers for their mobile graphic cards. So the question is: Will Apple publish XP-drivers for that card in the future?
Or do I have to buy Windows Vista?
And has anyone benchmark-results using Windows XP or Vista respectively?
Thanks in advance!
Macbook Pro 2,2 Mac OS X (10.4.9)
Macbook Pro 2,2 Mac OS X (10.4.9)

Thanks for the welcome!
I score about 2.780 points with 3dmark 06. 3dmark 06 didn't seem to recognize the graphics card, by the way.
Ran also Unreal Tournament 2004 and Dungeon Siege. UT 2004 ran better on my old Macbook (Intel Core Duo, 512 MB), Dungeon Siege had 20-60 fps (not impressive at all for such an old game).
So something seems to be wrong... hope it's the drivers and not the hardware.
Greetings!
Macbook Pro 2,2 Mac OS X (10.4.9)

[Consolidation-Locked] RAW support for the Nikon D600?

When will Adobe update RAW support for the Nikon D600?
Message title was edited by: Brett N

Lightroom 4.2 and Camera Raw 7.2 (Elements 11) are currently available and provide support for the Nikon D600.
Go to Help > (Check for) Updates to install.
Please see: http://forums.adobe.com/message/4785056

When will a plugin be available for the canon g1x RAW files?

When will a plugin be available for the canon g1x RAW files?

Seems the DNG converter doesn't support that camera yet. Iridient Digital does but you may want to wait on Adobe. If not Iridient Devloper (Mac only) is an excellent raw converter.

Lightroom 3 does NOT support raw files for the Canon Sureshot S95

Have just bought the new Canon Sureshot S95
after contacting Adobe support I am told Lightroom 3 does NOT support raw files for the
Canon Sureshot S95.
Come on Adobe.....please provide an update asap.

(1) Well Boss I did what you said and used Canon DPP to convert to TIFFs. Choices are 8-bit TIFF or 16-bit TIFF - I chose 16-bit because part (90% part) of the reason for wanting to work in RAW is to keep the bit depth of teh original. On my EOS 40D it is supposedly 14 bits, which gives great scope to play with the levels & curves without seeing poster effects. If I choose 16 bit TIFF then each S95 image becomes a 70MB file, parallel to my JPEG and RAW. Hardly a satisfactory solution.
(I realise, however, that I don't actually know the bit depth of the S95 RAW file - anybody? ).
(2) SUGGESTION- even if you are adding S95 support to the next update (which I dearly hope), be kinder to those with new cameras in general and allow LR to import JPEGs if it cannot import the RAWs (overriding if necessary the 'ignore JPEG' preference setting). I am sure users with that preference would still prefer a JPEG than no picture at all!
Since I discovered this compatibility problem, I switched the camera to record RAW+JPEG*. To my great irritation LR3 ignores the JPEGs even though it cannot load the RAWs. So if I want to import from one supported camera (EOS40D) and one unsupported camera (S95) I have to keep going into preferences to switch on and off the 'ignore JPEG' function.
JJ
* (this seems to be a setting that needs doing in the various different modes of the camera, by the way).

HT4757 RAW support for the SONY RX100?

Anyone know when will Apple be adding RAW support for the SONY RX100?

Unfortunately this is a user forum, so no-one can answer that one for you. You can use the feedback option in aperture to request it though. More than likely it wont come until Canon or Nikon release some more DSLRs, which is usually what prompts an update. For what it's worth you can use the Adobe DNG converter which will convert the sony .arw file into a .dng file that Aperture can read. It is another step to your workflow but you can do it.

[Consolidation-Locked] Please add RAW support for the Nikon D600 to Lightroom as soon as possible!

My Fair Adobe,
Please add RAW support for the Nikon D600 to Lightroom as soon as possible!
ViewNX lets me get to the images, but come on!!! I know Lightroom, and you, ViewNX, are no Lightroom.
Yes, I see everyone else ASKING for D600 support. I'm here to beg for it! Don't make me wait much longer!
Message title was edited by: Brett N
Message title was edited by: Brett N

Rob, my reading of your site is that this plug-in copies settings from raw to jpeg, does it work the other way around as well?
Rob Cole wrote:
One of the great things about the new 0-based defaults and linear tone curve is:
You can develop the jpegs now, in Lightroom, and then sync the settings to the raws later (e.g. using RawPlusJpeg), and provided you select a matching camera profile, they will look almost the same (white balance won't translate over, but everything else will, more or less). Beware lens corrections applied to the raws might alter the registration of precision local adjustments.
Note: I recommend shooting with ADL off in order for this to work better, and consider turning sharpening off in camera as well, and noise reduction and everything else to whatever extent is possible.
Rob

When will there be a fix for the permissions problem in iTunes 11.1.1? I get a list of three or four-hundred when I run the repair program.

Does anyone know when will there be a fix for the permissions problem in iTunes 11.1.1? I have a list of three to four hundred repairs everytime I use the repair program. ~Mike.

SinkeMH wrote:
Does anyone know when will there be a fix for the permissions problem in iTunes 11.1.1
Likely someone does but Apple has not stated if/wehn.
I have a list of three to four hundred repairs everytime I use the repair program. ~Mike.
Then don't use the repair program unless you are actually having an issue.

Will there be a patch for the security flaw for iMac version 10.6.8.?

Will ther be a patch for the security flaw for iMac version 10.6.8?

What security flaw are you referring to? If you're referring to the recent SSL flaw, that was only present in OS X 10.9.
Regards.

WIA support for the Canon MX922

Is there a WIA driver for the Canon MX922 multifunction printer? It doesn't respond to my version of Photoshop which requiresa scanner that is WIA compliant.

Hello.
The MX922 uses a TWAIN driver for scanning.
For many of the latest versions of Photoshop, a TWAIN plugin would have to be installed in order to use a TWAIN scanner with the program. Please visit www.adobe.com for information on how to update the plugin for your version of Photoshop.
If additional assistance is needed, feel free to call us at 1-800-OKCANON.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

When will Aperture 3 support RAW processing for the Canon 5D III?

When will Aperture 3 support RAW processing for the new Canon 5D III?

We are no phophets and also do not work for Apple - so we don't know.
See this thread to join into a discussion with others who also are waiting:
Canon 5D Mk III - RAW update?
Regards
Léonie

Is there Camera RAW support for Lightroom 4.4 and Canon 7D Mark ii?

I need Camera RAW support for Lightroom 4.4 and Canon 7D Mark ii. Is there a Camera RAW version for me?

Thanks for your help. I checked out DNG on YouTube and understand more
about it. I downloaded the DNG converter and transferred in files from my
camera. Then I imported into Lightroom. It works! Thanks again.
On Wed, Nov 19, 2014 at 5:56 PM, Jeff Schewe <[email protected]>

Will there be raw support for the Canon G10 before CS4?

Similar Messages

Maybe you are looking for