Will WLCS work with Cisco 1231G WAPs? Along with 1552s?

Have a partner with a client that has 1231Gs installed and wants to add a WLCS. Will that device control those WAPs? The partner is adding LAP1552LWs. Will they play together?
Thanks - Art

Hi Art,
This is the Cisco Small Business Support community. The WLCS and 1231G are not supported in this community. Maybe you can find your answer here: http://www.cisco.com/en/US/products/ps6366/prod_configuration_examples_list.html
Thanks,
Cindy Toy
Small Business Support Community Manager

Similar Messages

Is the new TMobile contract free iPhone6 factory unlocked? What I mean is will it work in India or Middle east with a local sim over there?

Is the new TMobile contract free iPhone6 factory unlocked? What I mean is will it work in India or Middle east with a local sim card over there?

Previous T-Mobile versions of iPhones (5, 5s, 5C) bought directly from Apple required no activation with T-mobile at all, and would accept any sim card.
Since you are essentially paying full price for the phone. You cannot be locked to a carrier.
They simply came packaged with a T-Mobile sim you could discard and replace with your own.
There's no real reason to think this will change for the new iPhones.
Cadujr from sao paulo wrote:
I bought 2 iPhone's 5S that were "contract-free" and they worked just fine with other carriers.
Could some one from the US check if the "contract-free" iPhone 6 could be used with a local carrier?
When they are released, I'm sure many people will do just that.

HP Wireless Printers cannot connect to WPA2-secured WiFi networks with Cisco/Meraki WAPs

In the last two months, I've had the displeasure of working with two very different HP printers and attempting to make them work on a WPA2-secured wireless network. All attempts to authenticate fail with "invalid phassphrase".
I'm not the first person to encounter this, it's a problem with many different HP wireless printers (I just happen to have physical access to the OfficeJet Pro 8610 & Deskjet 3511).
My equipment is a Cisco ASA 5505 Firewall running ASA 9.1x & Cisco Aironet 1142 running IOS 15.3.x.
What does work on the WPA2/AES SSID: Apple MacBook Air running OSX 10.10.2, Three Windows-Based laptops running Windows 8.1 Update 1, an iPhone 5s, Three Windows Phone 8.1 devices, Roku 2, PlayStation 4, PlayStation 3, Sharp Aquos TV, Amazon Streaming Stick, and an Android Tablet (Jellybean). Basically, everything.
What does not work on the WPA2 network: OfficeJet Pro 8610 & Deskjet 3511.
To test the theory there is a problem with HP's implementation of WPA2 with regard to Cisco Aironet IOS, I built out a second SSID that only works in WPA/TKIP mode. This solution works. Both HP printers will join the WPA/TKIP network.
So, I'm able to demonstrate there is a certain connectivity issue. When i look at AAA Debug on the WAP's console, I can observe the HPs attempt to authenticate "Bind I/F" on the WPA2 SSID, however they do not achieve authentication and do not pass the AAA phase. However, on the WPA SSID, they bind and authenticate successfully.
To help illustrate this, here is my WAP running config. It's about as simple as it can get. There is no relevant MAC filtering or ACLs bound to any interface. Noting that I have an ACL on remote access to the WAP (i.e. Locked down to SSH, disabling telnet). The main point being that the ASA firewall is not a factor in this problem as the issue is at the WAP before WPA2 authentication can complete, therefore the printers never reach the network / when the printers connect to the WPA network, the operate fully & correctly.
If anyone at HP can indicate why this particular config is somehow improper or broken, that would be fantastic. There should be no reason why Cisco / Meraki WAP owners have to lower wireless encryption standards just for a printer, be forced into wired, create separate SSIDs with lower encryption specifically for a device.
Building configuration...
Current configuration : 6064 bytes
! Last configuration change at 12:46:47 UTC Fri Aug 20 1993 by admin
version 15.3
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
hostname 10-10-50-1
logging buffered 1024768
logging rate-limit console 9
aaa new-model
aaa authentication login default local
aaa authorization exec default local
aaa session-id common
no ip source-route
no ip cef
ip domain name freedom.local
dot11 syslog
dot11 vlan-name inside vlan 50
dot11 vlan-name inside-wpa-only vlan 70
dot11 ssid inside
   vlan 50
   band-select
   authentication open
   authentication key-management wpa version 2
   mbssid guest-mode
   wpa-psk ascii 7 xxxxxx
   information-element ssidl
dot11 ssid inside-wpa-only
   vlan 70
   band-select
   authentication open
   authentication key-management wpa
   mbssid guest-mode
   wpa-psk ascii 7 xxxxxx
   information-element ssidl
dot11 band-select parameters
   cycle-count 3
   cycle-threshold 200
   expire-supression 20
   expire-dual-band 60
   client-rssi 75
dot11 wpa handshake timeout 500
dot11 network-map
username ADMIN privilege 15 secret 5 xxxxxx
ip ssh version 2
bridge irb
interface Dot11Radio0
no ip address
no ip route-cache
encryption vlan 50 mode ciphers aes-ccm
encryption vlan 70 mode ciphers aes-ccm tkip
ssid inside
ssid inside-wpa-only
antenna gain 0
mbssid
speed basic-1.0 basic-2.0 basic-5.5 basic-11.0 6.0 9.0 12.0 18.0 24.0 36.0 48.0 54.0 m0. m1. m2. m3. m4. m5. m6. m7. m8. m9. m10. m11. m12. m13. m14. m15.
channel 2412
station-role root
l2-filter bridge-group-acl
interface Dot11Radio0.50
encapsulation dot1Q 50 native
no ip route-cache
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
interface Dot11Radio0.70
encapsulation dot1Q 70
no ip route-cache
bridge-group 70
bridge-group 70 subscriber-loop-control
bridge-group 70 input-address-list 700
bridge-group 70 output-address-list 700
bridge-group 70 spanning-disabled
bridge-group 70 block-unknown-source
no bridge-group 70 source-learning
no bridge-group 70 unicast-flooding
interface GigabitEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
interface GigabitEthernet0.50
encapsulation dot1Q 50 native
no ip route-cache
bridge-group 1
bridge-group 1 spanning-disabled
no bridge-group 1 source-learning
interface GigabitEthernet0.70
encapsulation dot1Q 70
no ip route-cache
bridge-group 70
bridge-group 70 spanning-disabled
no bridge-group 70 source-learning
interface BVI1
mac-address xxxx.xxxx.xxxx
ip address 10.10.50.1 255.255.255.0
no ip route-cache
ip forward-protocol nd
ip http server
ip http authentication aaa
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
ip route 0.0.0.0 0.0.0.0 10.10.50.2
logging history size 100
access-list 111 permit tcp any any neq telnet
bridge 1 route ip
line con 0
access-class 111 in
line vty 0 4
access-class 111 in
length 0
transport input ssh
line vty 5 15
access-class 111 in
transport input ssh
end

I get the same behavior with a laserjet m451nw. I need to enable tkip to get the printer working, it doesn't support pure aes-ccm (every other device here supports pure aes-ccm, even cheap ones), although it's advertised as working.
The following snippet of config works, but I still think it should work without the tkip "hack".
dot11 ssid whatever
vlan 1
band-select
authentication open
authentication key-management wpa version 2
interface Dot11Radio0
encryption vlan 1 mode ciphers aes-ccm tkip

New Vista pc sound blaster will not work can someone help please even with dri

hi i have a brand new vista machine with athalon 64 duel core x2 5000 (2.6 Ghz 52 k)with 2Gb ram my old pc was xp .8 celleron but mother board blow hense the change
Anyway can someone pls help i have creative 2 i think it was my brother who put the card from my old pc to this new one i have the instalation disc it says audigy sound blaster made 200 I my self are not very good at tecky stuff i edit video (Home movies) and add sound to them this will not run on vista pc i feel like throwing it in the bin half my software will not work from xp i just get e messege saying windows is shuting the programe and will not work i've try'd downloading the patch for the beta driver on the site that will not work it just crashes windows out and that is it
can someone tell me what ime doing wrong or do i need to buy a new sound card system or try to wait for a new updated driver from creative
Also what is vista beta
i have on my new pc vista home basic 32 bit are these not the same system
thankyou
ps this is my first post
regards
Simon in U/K

nevermind, managed to sort it although i have now lost everything, never again will i have a sony phone, pile of junk is probably the nicest term i can think of for them, this happened with mine, and my partners was broken (somehow screen smashed without any assistance) within 2 weeks of having it. samsung all the way!

Will It Work on Leopard: iMac Late 2009 with Quad Core i7, 8GB and 4850 Mobility GPU

Hi. I'm doing an experiment if the garbled screen (unreadable but the OS and files are not being corrupted at all) I'm experiencing since I upgraded to Lion (up to Yosemite) is a software bug (specifically when it's running it's 3D drivers) or a hardware bug (possibly the GPU is failing). I would rule it as a hardware, that the iMac's GPU is failing but when I used Ubuntu 14.04 Live CD which does not use any of the 3D drivers (it doesn't use OpenGL) for its 3D acceleration, it's perfect there which is why I feel it may be a software bug- no problems with 3D acceleration.
If Leopard would work on the late 2009 iMac with i7 quad core, that'd be great.
Thank you in advance.
God bless, Rev. 21:4

The only issue I have found is that the there are no additonal display resolution settings to adjust.
So the iMac is stuck with its native resolution in OS X 10.5.8 Leopard (I hate the iMac's 2550 x 1900 resolution. Everything is just too small for my 50 year old eyes.)
You can adjust the size of icons and icon text size in the Finder Prefs and View Options, you can adjust the Dock size, but that is pretty much it.
No way to adjust the size of the text in the top main menu bar or make the text in the title bar on Finder windows larger, either.
But everything else works.
I can access all of my other external drives, most of the applications, that are mostly updated to work just with OS X 10.5.8 Leopard, launch and work fine. My Wacom Intuous3 tablet seems to work fine add I can adjust the preferences and controls of all of by pens and airbrush tool.
My older IR Microsoft and Logitech mice work fine.
I can't believe how much faster OS X 10.5.8 runs on this iMac.
If I hadn't updated all of my Apple apps on OS X 10.6.8 Snow Leopard and all my updated iTunes, iPhoto and Aperture Libraries, long ago, needed more up to date web browsers (TenFourFox wasn't available back in 2011) and Mail clients, more up to date Flash and security updates, I might have just stayed using OS X 10.5 Leopard on this iMac.
It is quite a bit faster than Snow Leopard. Even that much faster considering I am running OS X 10.5.8 from my external FW800 drive.

Will It Work on Tiger: iMac Late 2009 with Quad Core i7, 8GB and 4850 Mobility GPU

Hi. I'm doing an experiment if the garbled screen (unreadable but the OS and files are not being corrupted at all) I'm experiencing since I upgraded to Lion (up to Yosemite) is a software bug (specifically when it's running it's 3D drivers) or a hardware bug (possibly the GPU is failing). I would rule it as a hardware, that the iMac's GPU is failing but when I used Ubuntu 14.04 Live CD which does not use any of the 3D drivers (it doesn't use OpenGL) for its 3D acceleration, it's perfect there which is why I feel it may be a software bug- no problems with 3D acceleration.
If Tiger would work on the late 2009 iMac with i7 quad core, that'd be great.
Thank you in advance.
God bless, Rev. 21:4

Tiger won't work.
Install OSX Restrictions

WCS and WLC versions for Cisco 3600 WAP

Hi,
I got a few Cisco Aironet 3602i. The minimum WLC version to support these is 7.1.91.0. I am planning to upgrade to 7.2.103.0. The minimum WCS version to support these WAP is 7.0.220.0 and the next available 7.0.230.0. Checking the release notes for both of these WCS versions, there is no mention of support for WLC versions listed above.
http://www.cisco.com/en/US/docs/wireless/wcs/release/notes/WCS_RN7_0_230.html#wp152663
Am I missing something here ? What versions would be required on WCS and WLC to make all the three entities (WLC, WCS, WAP) inter-operable ?
Thanks,
Regards, Rashid.

Thanks Scott.
Table-5 from your link indicates WCS 7.0.230.0 support for WLC 7.1.91.0, although release notes for WCS fails to mention this. I think thats the only option in the our existing WCS based network then. Other option being to upgrade to NCS.
The NCS page http://www.cisco.com/en/US/products/ps6305/index.html indicates it will be offered to existing WCS customers when releases. Would we be required to pay for the product or both product and licenses or none ?

Netboot will not working, getting globe, then flashing folder with question mark.

I just created a netboot image which went off without any problems. I copied the two .nbi folders to my NetBootSP0 folder, and enabled them within netboot. My OS X server which is my netboot server and dhcp server. When I boot using N or Option N, I get the flashing globe for several seconds, the request goes through to the server and gets ACK {SELECT} however a few more seconds after, I get the flashing folder and question mark before it does a normal boot. I have read the other posts about DHCP and Subnets. My server and and clients are all 255.255.0.0. Any suggestions would be very helpful as I need this to work for several buildings.

This might work for some:
I had the same problem of the netboot image not mounting/opening, spinning globe then booting back to the Mac HD on the client and it was only when I remembered that we had manually experimented with jumbo frame rates and the MTU settings for our 32TB RAID in the Hardware settings for Ethernet ports on our servers. I turned the settings back to "Automatic" and 1000baseT on, then the whole NetInstall and Neboot was working perfectly again.

Messages will not work on 2009 21.5 iMac with Yosemite

I have a 2009 iMac with Yosemite 10.10.2 and cannot get messages to work with a good AIM account, any ideas?

In order: No, and I don't know for sure, but strongly suspect no.
Only the 27" models have video input, and things like TV tuner/capture cards are always going to have a lag that is unacceptable for gaming. Even if you had a 27", it wouldn't work very well for use with a game console. I've been there, done that, with just about every possibility you can think of.
For a time I had an Xbox, PS2, and GameCube all connected to a Dell monitor and the sound chained through my computer. It worked, but it was a very convoluted and fragile system. The best thing I ever did was just buy a surround sound receiver and TV for my game consoles.

Facetime will not work on my late 2009 mini with MLion

I have a 2009 mini, upgraded to Mlion. Facetime worked with Lion, but not now.
Also, the icloud icon that should appear on my Safari Browser, is not there.

No need to dial a number. Click on your contact's email address to call them.

Standard Hours Required on a Work Center for a month along with CC

HI Gurus,
My requirement is :
I need a report which fetches how many hours are required in a month on a particular cost center attached to work center for a plant.
Is there any standard report to fetch this . If no how can we develop a report. Which tables we need to combine in CO and PP.

Hi,
Check report S_ALR_8703611.
Regards.

I recently installed FF 29.0 and found loads of issues with it, Noia 4 did not work nor did Fox Clocks along with other issues. Have these been fixed in 29.1???

Is FF 29.1 just the same as FF 29.0 where we the user loose control of our browser and can't customise it to our liking. If so how do I stop the annoying pop ups telling me to install it because security issues or not I'm staying with FF 28.0. Thanks peoples for any replies they are very much appreciated cheers.

hello jazzie5, on the noia 4 page the theme's author stated that the development has discontinued - as an alternative you can use https://addons.mozilla.org/firefox/addon/noia-fox/
for fox clocks & firefox 29 please see this helpful comment by a user of the extension: https://addons.mozilla.org/firefox/addon/foxclocks/reviews/582886/

HT1849 If I complete my album will I also get the digital booklet along with it?

I have recently completed my album and I am not sure if I should have received the digital booklet or not?

Hi jjlovecub!
I found an article that I believe will answer your question:
Is bonus material included as part of my Complete My Album download?
Complete My Album will include whatever content is included on the eligible album on the iTunes Store at that time. For example, bonus materials only available at pre-order fulfillment will not be included in the Complete My Album purchase.
That answer is taken from the article located here:
iTunes Store: Complete My Album Frequently Asked Questions (FAQ)
http://support.apple.com/kb/ht1849
Thanks for using the Apple Support Communities. Have a good one!
-Braden

After installing Mavericks my iMac has become increasingly unstable with various applications crashing along with some white screen, kernel panic-style restarts. This has even continued after a fresh install, what should I do now?

Following an Apple Support Team member's advice, I retrieved as many files as I could and erased and repaired the HD before completing a fresh install from a bootable USB. Once I restored all of my software I set it backing up to Time Machine over night only to find that it had crashed and restarted over night before that had completed. I attach the crash report below:
Anonymous UUID:       F1CB4D58-C5DE-D8BB-D543-3270C7724738
Wed Oct 30 21:51:58 2013
panic(cpu 2 caller 0xffffff80070dc19e): Kernel trap at 0xffffff80071c5e3d, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x0000000000001018, CR3: 0x0000000029716000, CR4: 0x0000000000000660
RAX: 0xffffff81d7fa3740, RBX: 0xffffff80368dc8c2, RCX: 0x0000000000001000, RDX: 0xffffff8027862650
RSP: 0xffffff81d7fa3720, RBP: 0xffffff81d7fa3770, RSI: 0x0000000000000005, RDI: 0xffffff8027862650
R8: 0xffffff81d7fa3490, R9: 0xffffff81d7fa348e, R10: 0x0000000000002000, R11: 0x000000000000065e
R12: 0xffffff80368dc8f0, R13: 0x0000000000000000, R14: 0xffffff80368dc8c2, R15: 0xffffff80368dc8e8
RFL: 0x0000000000010202, RIP: 0xffffff80071c5e3d, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x0000000000001018, Error code: 0x0000000000000002, Fault CPU: 0x2
Backtrace (CPU 2), Frame : Return Address
0xffffff81d7fa33b0 : 0xffffff8007022f69
0xffffff81d7fa3430 : 0xffffff80070dc19e
0xffffff81d7fa3600 : 0xffffff80070f3606
0xffffff81d7fa3620 : 0xffffff80071c5e3d
0xffffff81d7fa3770 : 0xffffff80071db854
0xffffff81d7fa37c0 : 0xffffff80071daf60
0xffffff81d7fa3800 : 0xffffff80071e1fa0
0xffffff81d7fa3830 : 0xffffff80071d9e8f
0xffffff81d7fa38f0 : 0xffffff80073611e4
0xffffff81d7fa3a00 : 0xffffff80073697cb
0xffffff81d7fa3bd0 : 0xffffff80071fc9db
0xffffff81d7fa3c30 : 0xffffff80071d544b
0xffffff81d7fa3cb0 : 0xffffff80071d4da4
0xffffff81d7fa3d70 : 0xffffff80071c2ebf
0xffffff81d7fa3f50 : 0xffffff800743de23
0xffffff81d7fa3fb0 : 0xffffff80070f3e06
BSD process name corresponding to current thread: backupd
Mac OS version:
13A603
Kernel version:
Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64
Kernel UUID: 1D9369E3-D0A5-31B6-8D16-BFFBBB390393
Kernel slide:     0x0000000006e0
Model: iMac11,3, BootROM IM112.0057.B01, 4 processors, Intel Core i5, 2.8 GHz, 16 GB, SMC 1.59f2
Graphics: ATI Radeon HD 5750, ATI Radeon HD 5750, PCIe, 1024 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333531533643465238432D48392020
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333531533643465238432D48392020
Memory Module: BANK 0/DIMM1, 4 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333531533643465238432D48392020
Memory Module: BANK 1/DIMM1, 4 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333531533643465238432D48392020
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.74.0-P2P
Bluetooth: Version 4.2.0f6 12982, 3 services, 23 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Serial ATA Device: ST31000528AS, 1 TB
Serial ATA Device: OPTIARC DVD RW AD-5680H
USB Device: Hub
USB Device: BRCM2046 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Internal Memory Card Reader
USB Device: Hub
USB Device: My Passport 070A
USB Device: Built-in iSight
USB Device: IR Receiver
Thunderbolt Bus:

What else do you need?
Crashed again overnight during back-up:
Anonymous UUID:       F1CB4D58-C5DE-D8BB-D543-3270C7724738
Fri Nov 1 00:25:41 2013
panic(cpu 2 caller 0xffffff80184dc19e): Kernel trap at 0xffffff80187cf663, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x0000000000008014, CR3: 0x000000002b62c000, CR4: 0x0000000000000660
RAX: 0x0000000000000000, RBX: 0x0000000000008000, RCX: 0xffffff81e9e8bcc8, RDX: 0x0000000000000001
RSP: 0xffffff81e9e8bc60, RBP: 0xffffff81e9e8bcb0, RSI: 0xffffff8042096108, RDI: 0x0000000000008000
R8: 0xffffff81e9e8bcd0, R9: 0xffffff81e9e8be70, R10: 0x000000000000064e, R11: 0x0000000000000297
R12: 0x0000000000000000, R13: 0x0000000000000001, R14: 0x0000000000000000, R15: 0xffffffffffffffff
RFL: 0x0000000000010202, RIP: 0xffffff80187cf663, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x0000000000008014, Error code: 0x0000000000000000, Fault CPU: 0x2
Backtrace (CPU 2), Frame : Return Address
0xffffff81e9e8b8f0 : 0xffffff8018422f69
0xffffff81e9e8b970 : 0xffffff80184dc19e
0xffffff81e9e8bb40 : 0xffffff80184f3606
0xffffff81e9e8bb60 : 0xffffff80187cf663
0xffffff81e9e8bcb0 : 0xffffff80187cf310
0xffffff81e9e8bd00 : 0xffffff80187cea6f
0xffffff81e9e8bde0 : 0xffffff80185ff47a
0xffffff81e9e8be50 : 0xffffff80187bf04c
0xffffff81e9e8bec0 : 0xffffff80187bc6de
0xffffff81e9e8bf10 : 0xffffff80187bee5a
0xffffff81e9e8bf50 : 0xffffff801883de23
0xffffff81e9e8bfb0 : 0xffffff80184f3e06
BSD process name corresponding to current thread: mdworker
Mac OS version:
13A603
Kernel version:
Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64
Kernel UUID: 1D9369E3-D0A5-31B6-8D16-BFFBBB390393
Kernel slide:     0x0000000018200000
Kernel text base: 0xffffff8018400000
System model name: iMac11,3 (Mac-F2238BAE)
System uptime in nanoseconds: 285206678247
last loaded kext at 264611740123: com.apple.filesystems.msdosfs          1.9 (addr 0xffffff7f9a865000, size 65536)
last unloaded kext at 114432919226: com.apple.driver.AppleUSBUHCI          650.4.0 (addr 0xffffff7f9909b000, size 65536)
loaded kexts:
com.apple.filesystems.msdosfs          1.9
com.apple.filesystems.smbfs          2.0.0
com.apple.driver.AudioAUUC          1.60
com.apple.driver.AppleHWSensor          1.9.5d0
com.apple.driver.AppleBluetoothMultitouch          80.14
com.apple.driver.AGPM          100.14.11
com.apple.filesystems.autofs          3.0
com.apple.iokit.IOBluetoothSerialManager          4.2.0f6
com.apple.driver.AppleMikeyHIDDriver          124
com.apple.driver.AppleHDA          2.5.2fc2
com.apple.driver.AppleUpstreamUserClient          3.5.13
com.apple.kext.AMDFramebuffer          1.1.4
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.AMDRadeonX3000          1.1.4
com.apple.driver.AppleMikeyDriver          2.5.2fc2
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AppleHWAccess          1
com.apple.driver.AppleLPC          1.7.0
com.apple.kext.AMD5000Controller          1.1.4
com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport          4.2.0f6
com.apple.driver.AppleBacklight          170.3.5
com.apple.driver.AppleMCCSControl          1.1.12
com.apple.driver.AppleUSBCardReader          3.3.5
com.apple.driver.AppleIRController          325.7
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          35
com.apple.iokit.SCSITaskUserClient          3.6.0
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCIBlockStorage          2.4.0
com.apple.driver.AppleUSBHub          650.4.4
com.apple.iokit.AppleBCM5701Ethernet          3.6.9b9
com.apple.driver.AppleFWOHCI          4.9.9
com.apple.driver.AirPort.Atheros40          700.74.5
com.apple.driver.AppleAHCIPort          2.9.5
com.apple.driver.AppleUSBEHCI          650.4.1
com.apple.driver.AppleACPIButtons          2.0
com.apple.driver.AppleRTC          2.0
com.apple.driver.AppleHPET          1.8
com.apple.driver.AppleSMBIOS          2.0
com.apple.driver.AppleACPIEC          2.0
com.apple.driver.AppleAPIC          1.7
com.apple.driver.AppleIntelCPUPowerManagementClient          216.0.0
com.apple.nke.applicationfirewall          153
com.apple.security.quarantine          3
com.apple.driver.AppleIntelCPUPowerManagement          216.0.0
com.apple.driver.AppleBluetoothHIDKeyboard          170.15
com.apple.driver.AppleHIDKeyboard          170.15
com.apple.driver.IOBluetoothHIDDriver          4.2.0f6
com.apple.driver.AppleMultitouchDriver          245.13
com.apple.kext.triggers          1.0
com.apple.iokit.IOSerialFamily          10.0.7
com.apple.driver.DspFuncLib          2.5.2fc2
com.apple.vecLib.kext          1.0.0
com.apple.iokit.IOAudioFamily          1.9.4fc11
com.apple.kext.OSvKernDSPLib          1.14
com.apple.iokit.IOSurface          91
com.apple.iokit.IOAcceleratorFamily          98.7.1
com.apple.iokit.IOBluetoothFamily          4.2.0f6
com.apple.driver.AppleSMBusPCI          1.0.12d1
com.apple.kext.AMDSupport          1.1.4
com.apple.AppleGraphicsDeviceControl          3.4.12
com.apple.iokit.IOFireWireIP          2.2.5
com.apple.driver.AppleHDAController          2.5.2fc2
com.apple.iokit.IOHDAFamily          2.5.2fc2
com.apple.driver.AppleSMC          3.1.6d1
com.apple.driver.IOPlatformPluginLegacy          1.0.0
com.apple.driver.IOPlatformPluginFamily          5.5.1d27
com.apple.iokit.IOBluetoothHostControllerUSBTransport          4.2.0f6
com.apple.driver.AppleBacklightExpert          1.0.4
com.apple.iokit.IONDRVSupport          2.3.6
com.apple.driver.AppleSMBusController          1.0.11d1
com.apple.iokit.IOGraphicsFamily          2.3.6
com.apple.iokit.IOSCSIBlockCommandsDevice          3.6.0
com.apple.iokit.IOUSBMassStorageClass          3.6.0
com.apple.iokit.IOUSBHIDDriver          650.4.4
com.apple.driver.AppleUSBMergeNub          650.4.0
com.apple.driver.AppleUSBComposite          650.4.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.6.0
com.apple.iokit.IOBDStorageFamily          1.7
com.apple.iokit.IODVDStorageFamily          1.7.1
com.apple.iokit.IOCDStorageFamily          1.7.1
com.apple.iokit.IOAHCISerialATAPI          2.6.0
com.apple.iokit.IOSCSIArchitectureModelFamily          3.6.0
com.apple.iokit.IOEthernetAVBController          1.0.3b3
com.apple.driver.mDNSOffloadUserClient          1.0.1b4
com.apple.iokit.IOUSBUserClient          650.4.4
com.apple.iokit.IOFireWireFamily          4.5.5
com.apple.iokit.IO80211Family          600.34
com.apple.iokit.IONetworkingFamily          3.2
com.apple.iokit.IOAHCIFamily          2.6.0
com.apple.iokit.IOUSBFamily          650.4.4
com.apple.driver.AppleEFINVRAM          2.0
com.apple.driver.AppleEFIRuntime          2.0
com.apple.iokit.IOHIDFamily          2.0.0
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          278.10
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.AppleKeyStore          2
com.apple.driver.DiskImages          371.1
com.apple.iokit.IOStorageFamily          1.9
com.apple.iokit.IOReportFamily          21
com.apple.driver.AppleFDEKeyStore          28.30
com.apple.driver.AppleACPIPlatform          2.0
com.apple.iokit.IOPCIFamily          2.8
com.apple.iokit.IOACPIFamily          1.4
com.apple.kec.pthread          1
com.apple.kec.corecrypto          1.0

I have created my site with Muse and have uploaded to an external ftp hosting, now my secure log in will not work because I am not using BC. Is there a way to create a secure log in that will work with out being forced to use BC?

I have created my site with Muse and have uploaded to an external ftp hosting, now my secure log in will not work because I am not using BC. Is there a way to create a secure log in that will work with out being forced to use BC?

Hi
Secure Zone login feature will only work if you host your website with Business catalyst.
Please take a look to this as an alternative
Password Protect Pages Widget for Adobe Muse
Also, check this thread,
Re: Can I create a login/password protection in Muse for a HTML5 page or two?

Will WLCS work with Cisco 1231G WAPs? Along with 1552s?

Similar Messages

Maybe you are looking for