Will you finally fix these bugs?!

I was patiently waiting for fixes since 5.x... but now I see that you won't do anything if we don't say something about it...
I have iPhone 4 with iOS 6.1.3, so:
- Cellular Data settings (APN, Username and Password fields in Cellular Data, MMS and Internet Tethering sections) get wiped out on each iOS update... with no exception! I could maybe live with that but what started happening recently I cannot: sometimes just out of the blue these same fields get wiped out. And then I'm left wondering why 3G doesn't work.. sometimes I think it's the coverage but then I remember it might be this annoying bug. And what's more after I fill them back in I have to restart the phone for it to start working again. Everytime you release a new iOS update I install it just to see if you'll fix this bug and of course first I have to fill the settings back in and then hope they at least won't disappear on their own... but they do..
- Keyboard Shortcuts just stop working... This happened in some previous version of 6.x and I found a workaround.. I think I had to delete the shortcuts and add them back in a special way.. thankfully I have just one.. can't imagine the pain if I had much more. After some time after I fixed it the problem just came back... so now I always have to type my email instead of using a handy shortcut.
- Outgoing email sometimes gets stuck at 100%.. it happened on 3G when I needed it most.. and today it happened on wifi as well (it wen't through after 10 minutes or so). BAD
I think I'll switch to competition soon because it's not "it just works" anymore.. I can understand bugs happen and everything but I would really expect them to be fixed after a lot of people write about them... and after a lot of time. This phone is not even good for my GF anymore because the 3G will just stop working and he won't know how to fill those disappearing settings back in.
Do something about it already!!

Never had any of the "bugs" you claim.
If you think Android is trouble free or free from bugs, you live in a fantasy land.
I sold my S3 and went back to my iphone 5 because of the bugginess of android.

Similar Messages

Will you ever fix the BUG n. 5207902 ?

Hi,
I would like to know if Oracle intents to fix bug n. 5207902.
My problem: I cannot debug JSP that is deployed to standalone OC4J - or is it possible?
Branislav

Yes you can debug on a remote OC4J Container.
On the start command you need to include the debug settings
-XXdebug,port4000,detached,quiet
i.e.:
java -ojvm -XXdebug,port4000,detached,quiet - jar oc4j.jar
So in this case port 4000 is the one you can remotely debug to.

If I send my iPhone 3GS in will you still fix it even though you don't sell them anymore?

If I send my iPhone 3GS in will you still fix it even though you don't sell them anymore?

Sorry but you aren't speaking to anybody from Apple.
this is a user to user forum.

Oh, Apple! Will you pleeease fix the new "Mavericks" so that my poor old eyes don't have to continually hit "Zoom In" or enlarge every time I change to a different page?

Oh, Apple! Will you pleeease fix the new "Mavericks" so that my poor old eyes don't have to continually hit "Zoom In" or enlarge every time I change to a different page?

Hi..
Have you tried a different screen resolution ?
System Preferences > Displays > Display > Scaled

Adobe, please fix these bugs/features in Muse

So, here are a couple of really annoying things/bugs that keep happening in Muse.
(I've been working with the software for about three weeks, latest Muse CC update, on a MBP Retina, OS X 10.9.5, NVIDIA GeForce GT 650M 1024 MB + 16 GB 1600 MHz DDR3)
1. When I try to hit "Preview" and browse my website, the links to other pages than the initial one don't work, and you need to go back to the "Plan" and open each one of them individually, and then hit "Preview" in all of them, in order to be able to browse the entire website without getting blank pages.. Is there any way to come around this, and be able to set Muse to render ALL of the pages before previewing the website?
2. When I try to adjust the sizes of thumbnails in a slideshow, and zoom in on guides, it's IMPOSSIBLE to make them align perfectly to ANYTHING! The thumbnails just keep moving and popping around, and they don't follow the mouse movements at all, they just make rough changes in sizes and are very hard to work with. It doesn't matter if I zoom in 800% for example, things don't move or adjust smoothly at all, like in Illustrator for example.
3. Sometimes, it's impossible to copy a slideshow- it just freezes, even if I click down and select the thumbnail box. It seems like a bug, since the copy function comes back after I quit and restart the software, or just make a new slideshow from scratch and then delete it (seems to re-set something, I don't have a clue). The "copy" button under the "Edit" menu is simply shadowed out.. Why is that? It would be really nice to be able to alt-click-drag-and-drop these things, especially when you try to build a portfolio.. But, this is impossible for me, at the moment- the plus-sign in the green circle pops up, but it just moves the thumbnail section, it doesn't copy it..
4. Is there ANY way to make all slideshow thumbnail sections moveable? Even if they have the option "Free Form Thumbnails" deselected? What if I need to move lots of galleries on the same page, that need to have different form options selected, for visual reasons? At the moment, I can't select all different thumbnail galleries on my page, and move them all at the same time, which is quite irritating..
5. When I click a thumbnail in the middle or at the end of the gallery, there's a fast flash of previous images in the gallery, before the chosen image is shown fullscreen. Is there any way to get rid of this unwanted visual glitch? I just want them all to open like the very first image in the gallery, without any ghosting of previous images.. I have the horizontal swipe effect in these galleries, if that makes any difference..
6. Is there any way to make custom adjustments to thumbnail sizes, inserting a fixed width and height? Or, save a slideshow as a template, to use the same properties in another gallery?
7. Will it ever be possible to have different sizes of thumbnails in the same slideshow? What's the best way to make a gallery in a portfolio with artworks of different aspect ratios?
8. Why is not my embedded Youtube videos included when I export the project like a html-file? There's only a broken link/code in the video area, at the moment.. Will this be a problem later, when I really need to upload it on my server?
9. Is it not possible at all to import svg-files in a slideshow? Why is it possible in external widgets, but not in the built-in slideshow widget? I can place and import svg-files into the page, but not drag or import them to the slideshow itself..
I really like Muse, but I find it very hard and irritating to work with lots of times, so please fix these issues, or tell me how to avoid them, thanks!

A BIG THANK YOU for taking the time to share your thoughts regarding how to improve Muse. I've interspersed comments and clarifications below.
1. When I try to hit "Preview" and browse my website, the links to other pages than the initial one don't work, and you need to go back to the "Plan" and open each one of them individually, and then hit "Preview" in all of them, in order to be able to browse the entire website without getting blank pages.. Is there any way to come around this, and be able to set Muse to render ALL of the pages before previewing the website?
There are multiple ways to preview your work when using Muse.
Preview Mode - When you click the Preview button at the top right to open Preview Mode Muse will generate the HTML, CSS, JavaScript, images and assets for the page in the front Design view (or the Home page, if you're not in Design view) in the Preview tab/window. If you navigate to a different page by following a hyperlink Muse will generate the code for that page and display it. This in-app preview uses the OS browser, so the display uses Safari on the Mac or IE on Windows. Since the code for each page is generated/updated when it's navigated to, navigation to a page for the first time is slow.
Preview Page in Browser - If you select this option the code for the current page is generated and opened in your default browser. If you follow a link to another page, it will fail with a 404 file not found error, since this option only previews a single page. It's fast, but limited to one page.
Preview Site in Browser - If you select this option the code for your entire site will be generated and your home page will be opened in your default browser. You can freely navigate between pages via hyperlinks, since the preview exported the code for all the pages of your site. This option is very convenience for previewing your full site, but is much slower for a multi-page site than Preview Page in Browser.
Publish - If you select this option you can create a free temporary website on Adobe hosting. This is very handy when you want to view your site on multiple devices or have someone else review the site before you Publish or Upload the site to its production hosting location.
2. When I try to adjust the sizes of thumbnails in a slideshow, and zoom in on guides, it's IMPOSSIBLE to make them align perfectly to ANYTHING! The thumbnails just keep moving and popping around, and they don't follow the mouse movements at all, they just make rough changes in sizes and are very hard to work with. It doesn't matter if I zoom in 800% for example, things don't move or adjust smoothly at all, like in Illustrator for example.
The web is pixel based. There are (mostly) no fractional amounts. While you can zoom in, ultimately your output will be aligned (and limited to) whole pixel boundaries.
When working with thumbnails, the ramifications of working in whole pixel based media are magnified. For example, if you're using tiled thumbnails and have an 8 wide layout the total width will have to be a multiple of 8. You can only increase all 8 by whole pixel increments.
3. Sometimes, it's impossible to copy a slideshow- it just freezes, even if I click down and select the thumbnail box. It seems like a bug, since the copy function comes back after I quit and restart the software, or just make a new slideshow from scratch and then delete it (seems to re-set something, I don't have a clue). The "copy" button under the "Edit" menu is simply shadowed out.. Why is that? It would be really nice to be able to alt-click-drag-and-drop these things, especially when you try to build a portfolio.. But, this is impossible for me, at the moment- the plus-sign in the green circle pops up, but it just moves the thumbnail section, it doesn't copy it..
If Muse is truly freezing, we'd need to understand more about the steps involved. What I expect you're encountering is the fact you can copy and paste an entire widget, but you cannot copy and paste the individual parts of a widget. If you select the widget cut and copy are enabled. If you click a second time to select one part of the widget, then cut and copy are disabled. Most the widgets don't support having two parts of the same type (i.e. two next buttons, two sets of thumbnails, etc.) so at least copy and paste can't currently be supported. Those are limitations we'd like to remove, but for now they are the current limitations when working with widgets.
4. Is there ANY way to make all slideshow thumbnail sections moveable? Even if they have the option "Free Form Thumbnails" deselected? What if I need to move lots of galleries on the same page, that need to have different form options selected, for visual reasons? At the moment, I can't select all different thumbnail galleries on my page, and move them all at the same time, which is quite irritating..
I believe you're asking to be able to simultaneously select the thumbnail sets for multiple slideshow widgets? You're correct, that's currently not supported. The selection model is limited to selecting items that are siblings in the Layers panel. You can select two slideshow widgets, but not the parts inside one widget at the same time as the parts inside another.
5. When I click a thumbnail in the middle or at the end of the gallery, there's a fast flash of previous images in the gallery, before the chosen image is shown fullscreen. Is there any way to get rid of this unwanted visual glitch? I just want them all to open like the very first image in the gallery, without any ghosting of previous images.. I have the horizontal swipe effect in these galleries, if that makes any difference..
Noted as a feature request. When the sliding transition was implemented the most common ask was for the current behavior, so that's what's provided. Fade provides a transition between two images without any feedback of the images that were passed over.
6. Is there any way to make custom adjustments to thumbnail sizes, inserting a fixed width and height? Or, save a slideshow as a template, to use the same properties in another gallery?
Given the next question is about setting each thumbnail to be a different size, I'm not sure I understand this question. You can select a thumbnail and enter height and width values in the Transform panel or Control Strip. However, all thumbnails share the same size, so all of them will be updated to the new size. Not sure that answers what you're asking?
[edit: Zak] Regarding the second half of this question, a slideshow (or any other object or collection of objects) can be saved in the Library and used again in later projects.
7. Will it ever be possible to have different sizes of thumbnails in the same slideshow? What's the best way to make a gallery in a portfolio with artworks of different aspect ratios?
When "Scale to Fit" is used for the sizing of the thumbnails, they will appear with the aspect ratio of the original image sized to fit within the thumbnail container box.
8. Why is not my embedded Youtube videos included when I export the project like a html-file? There's only a broken link/code in the video area, at the moment.. Will this be a problem later, when I really need to upload it on my server?
Insufficient information here to be certain, but I suspect you've exported to a local folder and then opened the index.html (or other .html) file in your browser? When open a file directly in your browser "file://" protocol is used. Many/most services such as YouTube won't work on a .html page loaded using "file://" protocol. That's part of why Muse has a built-in mini-web server and the Preview, Preview Page in Browser and Preview Site in Browser features, which server up the .html files using "http://" protocol. Or you can Publish to a free temporary site on Adobe hosting.
9. Is it not possible at all to import svg-files in a slideshow? Why is it possible in external widgets, but not in the built-in slideshow widget? I can place and import svg-files into the page, but not drag or import them to the slideshow itself..
Correct. Support for SVG was recently added for Muse 2014.2. Support for including SVG graphics in slideshows was not part of the initial release.
In the future, while it may seem excessive, it's much more effective to create a new thread for each different issue/concern/topic you wish to discuss. When a thread starts with a large number of different topics it often goes unanswered because no one forum member or Adobe staffer feels qualified to respond to all the questions. Or, if it does get responses, it ends up being impossible to follow the discussion because so many different topics are intermingled. Thanks.

Creative centrale continues to be rubbish, how hard is it to fix these bugs?

?I cant bloody believe that creative centrale is so hard to make just WORK.
Firstly when i delete one track off my playlist via centrale, 2-3 random tracks gets wiped off the list. Secondly the programs search feature is virtually useless. Thirdly the program randomly crashes/locks up.
Do NOT pester me with what version im using/is windows updated/did i pay my electrical bill and what the **bleep** ever.
All these bugs you are PERFECTLY aware of cause, and you should **bleep** well have the professional pride to just **bleep**ing fix it.
You have sold me a Ferrari (X-Fi2) among mp3 players, with a 978 Lada motor (centrale) under the bloody hood.
Oh, and post scriptum: The half second lag x-fi2 provides with any x-(fidelity) enabled is also a real killer. Great **bleep**ing work on the end too...and yes its running .22.03.
Best regards from a slightly dissatisfied customer

P?This user interface is the worst piece of garbage I've ever attempted to use. It is totally incomprehensible, especially after the previous interface that was so wonderfully intuiti've.
It can't find files on my hard dri've, I cannot for the life of me figure out how to transfer files OFF of the device onto the hard dri've (gee, who would ever want to do such an esoteric thing?) and trying to figure out how to "tag" files, use the genres, playlists and artists functions is like trying to do yoga on the moon without oxygen.
I have literally spent 0+ hours struggling with this piece of crap. I've got the latest version, I've formatted to start from scratch, everything.
Great job scrapping a great little user-friendly interface for this horrible crap. I will never, ever buy another Creative MP3 player again due only to your "creative centrale" debacle.

Ios7 no call decline option when its locked battert drains fast music is not able to controlled through headset unless the music app is open please fix these bugs

Ios7 no call decline option when its locked battert drains fast music is not able to controlled through headset unless the music app is open please fix these bugs

if they are unable to update all languages in a normal time gap (it is now 6 months ago they released firmware 4.22 for the first product code (actually mine and maybe a few others)), they should not offer those many versions. the huge bug with out of memory in nokia navigator with firmware 3.58 is not fixed yet for those people. really absolutely not acceptable.
besides that, currently my phone is in a nokia service center, microphone doesnt work anymore (the one who i call just hears a very loud noise). my brother got the same phone, his one is in nokia service center since 2 weeks now, because it doesnt charge anymore as there seems to be a connection broken inside the phone).
well that will be fun if the phone returns (approximately 4 weeks), as I guess the phones will have new IMEIs as they will send 2 new phones and not fix the problem (would cost them more). but as i got a western europe with nordics-map licence locked to the imei, the next problem will be there after I get a nokia 6110navi with another IMEI back. i get really upset with this really slow support.

I can not get the add this extention to work today will you please fix it so I can use it as it is broken Please fix the add this button so that it will work!

I get this error message Something went wrong in processing your request. (If you were a web browser, I would say "400 rate limited".) when I try to use the add this button extension for firefox. Will you please help me to fix this problem so that I will be able to use the add this again real soon thank u.

This issue can be caused by corrupted cookies or cookies that are blocked.
*check the permissions on the about:permissions page and in "Tools > Page Info > Permissions"
Clear the cache and remove cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"

Avoid MathScipt Comments in EXE, Build & Run Problems - NI Please Fix these Bugs!

Hello,
After 4 days of intensive work, I have finally found the solution for two major MathScript Problems:
1) Mathscript Comments are included in your EXE File !!
 - Yes, if you do not watch your steps, the EXE will include all your % Mathscript Comments!
2) Problems building, but even worse: An app that builds with NO Error and NO Warnings will not RUN and creates the following misleading Erro Message:
 "The VI is not Executable. The full development version of LabView is required to fix the errors"
 With absolutely NO hint to what VI have the problem.
I have made myself an internal note how to avoid this problem. I am using LabView 2009, 2010 DS1 Release (I think this is 9.01) under WInXP SP2.
Rather than retyping everything, I will post the full text of my Notes below. I also mention several other LV BUG in this note, so pleae read carefully.
One is the TagSrv Error that occurs in LabView 2009 if I programatically deploy Shared Variables under the WinXP Development Environment. After this problem has occured, it will occur every time I restart XP, and in essense I have to restore to before I did this (thanks Nortong Ghost !!!).
Below you can find the full unabridged version of my Build, Run and Bug Notes for LV 2009 / 2010 DS1 (9.01). Hope they can be helpful to my fellow LabView programmers!
2010-07-03:
Building under LabView 2009 / 2010 DS1 Release (version 9.01)
Follow the steps below:
a) To successfully build an EXE that also runs
b) Avoid that MathScript Comments are included in the EXE !!!!!!!!!!!!!!!!
Before Building:
I) Recompile All by pressing Ctrl+Shift and pressing the RUN button on the Application_References.vi
 Then Save All (about 1200 Vis are saved)
II) Make Sure that NO User Defined Mathscript (and Mathscript Nodes?) define Empty Functions:
 This seemed to cause the following problem with the built EXE: The main VI will be broken, and a dialog reports:
 "The VI is not Executable. The full development version of LabView is required to fix the errors"
 MathScitp BUG: Empty Functions causes no Build Errorm but RUN Error:
 The following User Defined MathScript .m files are candidates:
 log_write() and log_clear() whith do_log_write() and do_log_clear() commented out, these functions are empty.
 When calls to log_write() and log_clear() where removed, the problem above vanished !
Building the EXE:
1) Additional Exclusions:
-"Disconnect type definitions": YES
- "Remove unused polymorphic VI instantces": YES
- "Remove unused members of project libraries": NO (do not know if this is important)
2) Advanced:
- Enable Debugging: "NO"
3) Mathscript BUG: The Application Builder Includes ALL MathScript Comments in the EXE if you use the New Build File Layout:
 IMPORTANT !!!!!!!!!!!!!
 Advanced:
 "Use LabView 8.x file layout": YES !!!!!!!
 Using the new layout, causes ALL COMMENTS FROM USER DEFINED MATHSCRIPT .M FILES TO BE INCLUDED IN THE .EXE !!!!!!!
4) BUG: DSC Reference Problem in LabView 2010 DS1 release:
 In VI Deploy_Shared_Variables.vi we deploy alle Shared Variables using the "Deploy Libraries.vi" which is a part of the DSC option.
 As long as only deploying of Variables is used, using this VI should NOT require any DSC Runtime license.
 We have used this before with no compilation problems.
 However, starting with LV 2009 SP1 (or was it the DS1 2010 upgrade) LV will start nagging us to resolve references to tens of VIs
 in the DSC lib file ! Solution: Used press "Stop" on the dialog, and the Build will succeed and the EXE will work !
 Optionally, we could use the following Invoke node for the deployment:
 (see: http://digital.ni.com/public.nsf/allkb/04D9A85B6967EE87862571140065EEC6). Excerpt from this description:
<<Right-click the block diagram to bring up the programming palette and go to Programming»Application Control and place the
 Invoke Node on the block diagram. Using the hand tool, click Method and select Library»Deploy Library>>
5) LabView BUG: Do NOT RUn the Application under the WIn XP SP2 Development Environment if the APP Deploys Shared Vars:
 This will cause the Dreaded TagSrv Error: "TagSrv.exe: This application has requested the runtime to terminate in an unusual way".
 After this Error has occured, it will reoccur each time WinXP SP2 is restarted, and (Network) Shared Variables will NOT work any more!
Geir Ove
Attachments:
LabView_Tagsrv_Error.jpg ‏26 KB

Hello Geir,
I have tried to reproduce the behavior you are seeing where .m file comments appear in the final built executable. However, I am unable to do so using LabVIEW 2009 SP1. I have a caller VI with a MathScript node that calls the adder function in adder.m. The contents of adder.m are as follows:
% ADDER This function adds 3 to its input variable
% y = adder(x)
% INPUT: x
% OUTPUT: y, equal to x + 3
function y = adder(x)
y = x + 3;
I have configured the build specification as you mention in steps (1) and (2):
Additional Exclusions
- "Disconnect type definitions" Yes
- "Remove unused polymorphic VI instances" Yes
- "Remove unused members of project libraries" No
Advanced
- "Enable Debugging" No
At first, I did not include the adder.m file in the project. I built the application and was not able to find the text "adder" anywhere in the EXE. Then, I added the .m file to the project and put it in the "Always Included" section in "Source Files." Again, I was not able to find the search text in the built EXE. In step 3, you mention
geirove wrote:
 "Use LabView 8.x file layout": YES !!!!!!!
but in the 5th post in this thread, you state
geirove wrote:
Compile using the new compile method ( Use LabView 8.x file layout": NO),
I have tried both settings in the Advanced section, but again, I am not able to find any comments in the EXE. I even added a call to the "path" function in adder.m. This puts a warning glyph on the caller MathScript node and generates different code. The EXE will return an unknown symbol error for adder (any VI with a warning glyph will not work in a built app), but I am not able to find any comments in the EXE. This project is attached below.
As for your other item with a broken EXE if you call empty functions, I am unable to reproduce this as well. I have taken the last attachment to your third post in this thread (the log_write function) and called it from the caller VI as well. The EXE runs just fine and I do not find any comments in this EXE either.
Unfortunately, there was a rather serious issue in the LabVIEW 2009 MathScript RT Module, where some internal MathScript VIs could become corrupted when building executables. Have you tried running the "Find Bad Instantiations" tool from this Knowledge Base article? Simply installing the SP1 version on top may not have corrected any VIs that may be corrupted.
Due to our difficulty in reproducing the issues you mention, could you modify the attached project or else attach a new project, appropriately configured, that builds an EXE with .m comments embedded in it? This way, we can uncover any minute details that we're overlooking.
Grant M.
Senior Software Engineer | LabVIEW MathScript | National Instruments
Attachments:
MComments.zip ‏186 KB

Cancelling my BT subscription - will you finally r...

As I've sent you an email with this complaint and cnacellation request, and you've not seen fit to reply (I mean, why would you - you've got my money already), I thought I would register here and re-type a variant of what I sent you. I've also been given a Servivce Request Number of VOL012-**********, but as that isn't being recognised by the Order Tracking part of your site I'm not sure what use that is either.
If I do not get a response this time, I will instead make recourse to the appropriate legal channels. As I'm sure you'll appreciate reading this, you are in clear contrevention of the Sale of Goods Act.
I purchased your BT Infinity broadband, phone and TV package in May 2013 to take advantage of the free BT Sport offer that you were promoting prior to the start of the Premiership this season. After around 6 weeks, I added the BT Vision unlimited package to my subscription, which worked out at £27.50/month (I had paid for a year's phone line rental in advance).
I moved house on 22nd November. I told you this in mid-October, as there was a 4 week gap between vacating my previous property on the 28th October and moving in to the new property. This meant that you had 6 weeks to make sure that the service would be working in time for when I moved in.
I was informed by your sales representative that the new property didn't have superfast broadband. As such, the cost of my subscription would reduce to £25/month as a result. As far as I was informed, the services I had originally purchased would remain the same (less the broadband speed of the Infinity service of course).
Upon moving in, my broadband service didn't come on until Wednesday 27th November for reasons that you neglected to explain (there was a mysterious "delay' apparently).
I also discovered that my BT Vision services weren't working. After calling your technical helpline 11 times in 7 days, I was informed that I would be contacted to resolve the issue. To date, no-one has ever contacted me.
After my patience finally snapped I called you on Monday (9th December) to cancel my BT services. I was put through to Dimansu in your technical department, who was the first person I've dealt with in two weeks who seemed to know what he was talking about, and who genuinely wanted to help instead of fobbing me off with excuses and lies about contacting me. I cannot compliment him highly enough.
Dimansu informed me that the reason I could not access BT Vision is that the service was affiliated to the landline number of my previous address. Dimansu made sure that this was rectified, and I'm delighted to report that my daughter can watch Spiderman cartoons again. Dimansu has therefore made my life that little bit better as a result.
However, I cannot quite believe the incompetence that your organisation has displayed in this regard. You had 7 weeks to get that right, couldn't manage to do so, and then spent the next 2 weeks staggering around blindly trying to find a solution to a problem of your own making. Previous BT representatives had even told me that the BT Vision part of my subscription had been deactivated. Why? How had they come to this conclusion? Do your various departmets exist in vacuums?
However, that wasn't all...
Dimansu also informed me that because I had a Youview box, but no longer had the Infinity package, that I would not be able to watch BT Sport on TV; doing so would require a BT Vision box(?).
At no point was I informed that this was the case. This wilful misrepresentation on your part is nothing short of a disgrace.
I have therefore decided that if you are going to treat me as a fool that I am going to cancel my contract with you. I will also be billing you for the time that you have made me waste, as well as my mobile phone bill for all the wasted calls you have made me make. I hate Murdoch's clan, but if it means purchasing a service where I actually receive what I am being sold then I will bite the bullet.

I have asked a moderator to provide assistance, they will post an invite on this thread.
They are the only BT employees on this forum, and are a UK based team of people, who take personal ownership of your problem.
Once you get a reply, if you click on their name, you will see a screen like this. Click on the link as shown below.
Please do not send them a personal message, as they may not be on duty for a long time, and your message will not be tracked properly.
For your own security, do not post any personal details, on this forum. That includes any tracking number you are give.
They will respond either by phone or e-mail within 5-6 working days.
Please use the tracked e-mail, to reply, not via the forum. Thanks
This is the form you should see when you click on the link. If you do not see this form, then you have selected the wrong link.
When you submit the form, you will receive an enquiry number, so please keep a note of it
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

There's a bunch of crappy pop ups now that I've updated to your latest version. Fix these bugs quick! Using Explorer for a few days

This update ******* sucks. Sick of these unloaded pop ups. ****************** Almost every page is getting them.
''Edited by a moderator due to language. See the [http://support.mozilla.com/kb/Forum+and+chat+rules+and+guidelines Rules & Guidelines] .''

Do a malware check with some malware scanning programs on the Windows computer. 
Please scan with all programs because each program detects different malware.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware: http://www.malwarebytes.org/mbam.php
*SuperAntispyware: http://www.superantispyware.com/
*Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: Home Page: http://www.microsoft.com/windows/products/winfamily/defender/default.mspx
*Spybot Search & Destroy: http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan: http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*http://support.kaspersky.com/viruses/solutions?qid=208280684
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked
Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Will Apple Finally Fix Safari Close X Going Missing Issue?

As many are aware, Safari Tabs suffer from the X close button going missing after extensive use of the browser. I'm familiar with the two main ways to get it back ie: Force Restart, or Reset Safari. However, the issue always resurfaces at some point. Quite frankly, it makes using Safari quite annoying to say the least.
Anyone aware if Apple will in fact have a fix for this at any point in the future? It seems to be an issue that a wide number of people have suffered from.
Any ideas?
Thanks

No it's not. It's suddenly missing on my iPad as well. In fact, it is just many of the disastrous effects of ios 8. I now have a machine- iPad 2- that feels like my lousy Asus computer running Windows 8-- everything is sluggish, odd things like sounds which used to occur no longer occur- like when plugging in power, notes load like a slug, email loads even more slowly, problems running Youtube, etc. In my opinion the whole rollout of this new system is a disaster. I can't find one new thing I like about it, and it has made me seriously reconsider whether to ever buy Apple again. All the hyperbola...for this??? Absurd. they need to get their shop in order before releasing garbage onto the market. Less money spent glorifying the technology, more time spent doing what Steve Jobs did- make it right, make it bloody simple and elegant, and get it right the first time.

Will you, Apple, fix this?

I was oh so excited for the ios4 upgrade for my 3g iPod Touch! I checked everyday for its availability! Now that I have had it for a while, I wish I never upgraded!
The battery life is simply horrible! There is significant lag while scrolling, opening apps, etc.
I am heart broken! I have read and tried shutting everything off, but that is not why I paid $300 for it!!!
They won't let me go back to the previous version, won't let me disable whatever feature I don't like!!! Here I thought Kim Jong-il was bad!!!
Apple, I was very close to converting, but now I am not so sure anymore. Unless you fix this, I am gone.... [I was gonna get the iPhone4, and MacBook pro]. Now I am think about the Samsung CAPTIVATE, and there are better laptop PCs coming out everyday!!!
Very disappointed!!!
I used to LOVE my iPod touch!!! Now it's just another useless gadget lying around the house...
Message was edited by: casper.dawson

I agree whats the point of purchasing a something that you have to shut down all of the features just to run the thing! An update is suppose to fix issues and enhance the product not hinder it! I feel for you casper.dawson I too am very disappointed maybe if enough competition gets out there companies might start providing customers with better service!

When will apple finally fix all the email issues for everyone? Mine is dead

I have read all of the answers to problems and have tried every solution posted and my account email is still acting like is uploading and updating but nothing comes up on the screen. I noticed that a lot of people here has some type of issue with emails which it happens to be at least for me one of the main reasons to buy the iphone (besides how cool it is)
Would apple realize all this issues and help us all to get functionality in the emails? Or there is somebody in this discussion that still have some tricks up their sleeve? I'll take every help i can get, right now I'm the joke of the office as everybody else have Treos and get their email working fine. Its frustrating and frankly the iphone beats the other phones hands down but it wont work!!!!!!!
Help !!!!!!!

Zapallin,
Much of what we have to work with is the email servers and settings that your email provider requires.
What type of email account are you accessing?
Do you notice the same behavior on Wi-Fi and EDGE both?
Is this your own account, a work account with an Exchange server, or a domain that you have hosted somewhere?
This article discusses, including an explanation why in the footnote, some of hte issues with sending email:
http://docs.info.apple.com/article.html?artnum=305634
This article discusses setting up an account to access an Exchange server, such as in an office environment:
http://docs.info.apple.com/article.html?artnum=305883
The note at the top mentions IMAP must be enabled on the Exchange server. In addition many workplaces put their Exchange server behind a firewall, and need to allow access past the firewall either by opening ports up, or via VPN for the Exchange server to work for users outside of the company network.
Hope this helps, and I will try to help further when we have more information about your specific email setup.
Nathan C.

When will Apple finally resolve audio bug muting ipad 2 ?

There is a clear software problem with this device and nobody is admitting to it.
Other members of my family have exactly the same intermittent problem with audio vanishing and then emerging on the iPad 2.
It has nothing at all to do with "mute" or "volume turned down" or any other 1-brain cell answers, it would seem that certain apps are conflicting something and the audio slider simply vanishes all together.
Shutting all the apps down, doing soft resets often bring it back on - but not all the time. Only a few mainstream apps are on this machine such as facebook, twitter, rightmove and autotrader and still the problem persists.
It persists with mine, it persists with my mum's and it persists with a work collegue - and we all own an iPad 2.
Under contract law if a latent fault is not remedied by the manufacturer, regardless of the warranty expiring or not - then it shall be replaced with the very latest model or it shall be completely refunded.
Do apple want to go through that?

Were you somehow under the (mistaken) impression that you're talking to Apple when posting on these forums?

Will you finally fix these bugs?!

Similar Messages

Maybe you are looking for