Windows 10 SDK 10.0.10069 : The installer failed. User cancelled installation. Error code: -2147023294
I get this error when installing VS 2015 Community RC. I'm installing on Windows 10 build 10074. I tried uninstalling VS and tried performing the steps from other known issues... Change > Custom > Select feature > Update.
I also get the other errors as well...
Emulators for Windows Mobile 10.0.10069 : The installer failed. User cancelled installation. Error code: -2147023294
Emulators for Windows Mobile 10.0.10069 : The installer failed. User cancelled installation. Error code: -2147023294
Same issue here, on a Surface Pro 3.
I've tried all I can think of, including a full reinstall of the OS (10074). Basically it always fails with the errors below.
Launching VS I do have the UAP templates installed, but not the emulators. I can create a new Windows Universal app no problem, however it shows up as a Windows 8.1 type in the properties pane. Missing lots of references so obviously nothing builds.
Tried installing the tools separately (the ones linked by Paul Chapman in a separate thread). These installed fine, and gave me the emulators (at least in the drop down, haven't been able to verify they work as nothing else works). Proceeded to "repair"
the VS install after this and at that point the install completed without errors, however nothing still works inside VS. Then proceeded to "modify" and remove any Universal app stuff, rebooted and reinstalled, only to get the same error again and
back at square one.
Tried, as far as I can remember, fresh installs from both the ISO and webinstaller (as there was some talk about the ISO containing older code and missing some tools).
Spent a week trying to get a Win10 rig up now, to no avail. Previous builds (with CTP6) would give me a UAP mobile install error, which seemed linked to Hyper-V not working, however Hyper-V was working just fine...
Oh, and obviously - No, I did not cancel the install myself.
Here are some relevant lines from the install log,
[060C:0CF0][2015-04-30T14:20:08]i000: MUX: Source confirmed
[060C:1994][2015-04-30T14:20:14]i000: MUX: Finished connecting secondary installer pipe
[060C:14D4][2015-04-30T14:20:19]i000: MUX: Updating secondary installer progress display name: Windows 10 SDK 10.0.10069
[060C:14D4][2015-04-30T14:20:25]i000: MUX: Updating secondary installer progress display name: Tools for Windows 10 Universal Apps (Windows SDK 10.0.10069)
[060C:044C][2015-04-30T14:28:13]i000: MUX: ExecuteError: Package (VSSecondaryInstaller_box) failed: Error Message Id: 1603 ErrorMessage: Windows 10 SDK 10.0.10069 : The installer failed. User cancelled installation. Error code: -2147023294
[0288:0054][2015-04-30T14:28:48]e000: Error 0x80048646: Process returned error: 0x80048646
[0288:0054][2015-04-30T14:28:48]e000: Error 0x80048646: Failed to execute EXE package.
[060C:044C][2015-04-30T14:28:48]e000: Error 0x80048646: Failed to configure per-machine EXE package.
[060C:044C][2015-04-30T14:28:48]i000: MUX: Installation size in bytes for package: VSSecondaryInstaller_box MaxAppDrive: 0 MaxSysDrive: 2063301632 AppDrive: 0 SysDrive: 2060471296
[060C:044C][2015-04-30T14:28:48]i000: MUX: ExecutePackageComplete for secondary installer
[060C:044C][2015-04-30T14:28:48]i000: MUX: Disconnecting secondary installer pipe
[060C:044C][2015-04-30T14:28:48]i000: MUX: Return Code:0x80048646 Msi Messages:Windows 10 SDK 10.0.10069 : The installer failed. User cancelled installation. Error code: -2147023294 Result Detail:0 Restart:None
[060C:044C][2015-04-30T14:28:48]i000: MUX: Set Result: Return Code=-2147187130 (0x80048646), Error Message=Windows 10 SDK 10.0.10069 : The installer failed. User cancelled installation. Error code: -2147023294, Result Detail=, Vital=False, Package
Action=Install, Package Id=VSSecondaryInstaller_box
[060C:044C][2015-04-30T14:28:48]i000: Setting string variable 'BundleResult' to value '0'
[060C:044C][2015-04-30T14:28:48]w350: Applied non-vital package: VSSecondaryInstaller_box, encountered error: 0x80048646. Continuing...
Think I'll go buy a Mac...
Similar Messages
-
Some users are receiving the following errors after Visual Studio setup completes
Emulators for Windows Mobile 10.0.10069 : The installer failed. User cancelled installation. Error code: -2147023294
Windows 10 SDK 10.0.10069 : The installer failed. User cancelled
installation. Error code: -2147023294We've fixed this issue, and have released an update as of 7PM PDT 30 April 2015.
New installs of Visual Studio 2015 RC should expect to no longer encounter this problem, unless
you lose your internet connection during installation. (That is, this error now indicates that the Windows SDK or Windows Emulator setup invoked by Visual Studio setup has lost internet connectivity and cannot download necessary files.)
To fix the issue, re-run setup and select the features "Universal Windows App Development Tools" and/or "Emulators for Windows Mobile" again.
If you have already installed Visual Studio and encountered this problem, you can now modify your Visual Studio installation to successfully install.
Go to Program & Features, select Visual Studio 2015 RC, and select Change. Click
Modify, then select the features "Universal Windows App Development Tools" and/or "Emulators for Windows Mobile", and click
Update.
Note that "Universal Windows App Development Tools" will be already selected. This is expected. Keep it selected, and click
Update.
An alternate solution is to install the Windows 10 SDK and Windows Emulators separately. Go to
https://dev.windows.com/downloads/windows-10-developer-tools. Scroll to the bottom of the page and install
the Windows 10 SDK and Windows 10 emulators outside of Visual Studio setup.
Thanks!
-Paul -
I am using win 10 home insider preview, build 10074. When I am trying to install VS 2015 community RC, selected Universal Windows App, it failed at
emulators for windows mobile 10.0.10069 : the installer failed. fatal error during installation. error code: -2147023293
VS file version is 14.0.5596.25192Hello EL_1980,
The error -2147023293 translated to Hex is:FFFFFFFF80070643
0x80070643 is a general error here so it is hard for us to troubleshoot. Please try download the ISO format of Visual Studio 2015 Community so that you can use the fciv.exe tool to verify the hash value. All info are listed on the VS2015 download page:
https://www.visualstudio.com/en-us/downloads/visual-studio-2015-downloads-vs.aspx
Please click first "Visual Studio 2015" tap below image.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
I tried my first Windows CD burn with iTunes; the burn fails at different points during the burn, with error codes 4450 or 4280.
I have the same problem, after years of everything working great. Last time this happened I tried using a different brand of CD and it worked, but I must warn you that now iTunes rejects all three brands I have been trying to use.
-
Hello everybody,
I get an issue when i try to deploy the latest version of Blackberry Desktop Software using a Group Policy Objetc.
The package tries to install a the computer's startup but i can't find the product installed.
On the event viewer and after a rsop.msc i get the following error: User cancelled installation
I worked threw this link http://supportforums.blackberry.com/t5/Desktop-Software-for-PC/Unable-to-install-Blackberry-Desktop-... and i installed vcredist_x86 and msxml6 on the client computer but the problem is still the same.
Could anyone help me for this issue.
Over simple way to solve my problem would be to let me know where i can download an older version of Blackberry Desktop Software because there is a link on the website but it doesn't work.Well folks. I've had enough.
The 9780 is a great phone, it's easy to use, practical and dependable. However, the Desktop Manager software has been giving me too many sleepless nights. On two occassions I must add: once at the end of last year when I bought it and only managed to solve it by myself after 4 weeks of trawling through online forums, blogs and other BB help sites and the recent one was last week when I tried to install it on my new Windows 7 notebook.
I know this is not entirely the fault of RIM, Microsoft also has a part to play. But considering the state of technology these days, it shouldn't have to be so difficult. I want a phone and software that makes my life easier and not have to be a slave to it by trying days and nights to solve its problems.
Hence, I have officially decom my phone and gotten an iPhone 4 instead. The switch ain't that difficult for me as I have always been platform neutral. As long it fits my needs, does it job well and doesn't give me too much headache, I'm cool with it.
Ciao folks! -
Attempting to copy to the disk failed. An unknown error occurrred (-51).
I apologize if this issue has been addressed before, but I’m pretty well at the end of my rope here. As mentioned in the title, the message is:
“Attempting to copy to the disk failed. An unknown error occurred (-51)”
I have tried resetting my 20G iPod, as well as re-downloading and running the iTunes and iPod installer. If I delete something off of my iPod, unplug it, and then plug it back in again, the song name is there again, but this time it has an exclamation point next to it and it won’t play the song. It plays the rest of the music fine through the computer and through my stereo (I was having some problems with it skipping to the next song in the middle of a song, but I reset it and haven’t had the problem since). I don’t want to have to restore the iPod for the simple fact that I didn’t take the time to backup all my music. That would be a pain. Also, something else I’ve noticed is that I can actually hear its hard drive now kicking in and out when it’s really quiet and plugged into the computer. I hope that I just never noticed that before.
Without having to restore, is there anything else that I haven’t tried? HELP!!
15" Powerbook G4 Mac OS X (10.3.9)Welcome to Apple Discussions!
See if either of these help (even though they apply for different error numbers/messages)...
http://docs.info.apple.com/article.html?artnum=302684
http://docs.info.apple.com/article.html?artnum=301267
Also, make sure everything is up to date...
iTunes
iPod Updater
Updating iPod's Software
If none of that works, you may need to restore...
Restore the iPod
But you can try to recover your music first...
MacMuse: Computer Crashed
btabz -
Global query block is causing a DNS server to fail a query with error code Name Error exists in the DNS database for WPAD on a Windows 2008 server.
The global query block list is a feature that prevents attacks on your network by blocking DNS queries for specific host names. This feature has caused the DNS server to fail a query with error code NAME ERROR for wpad.contoso.com. even though data
for this DNS name exisits in the DNS database. Other queries in all locally authoritative zones for other names that begin with labels in the block list will also fail, but no event will be logged when further queries are blocked until the DNS server
service on this computer is restarted. -
TS1368 I cannot connect to the iTunes Store. I receive Error Code -1202. This problem began yesterday. I have been successfully connecting to the store for months on this PC. I am running Windows 7 and the Windows Security Center. Thanks for any help.
Hello alankilner,
And welcome to Apple Discussions!
Using Proxy: Yes
Try temporarily disabling this setting by following the steps outlined in this Apple support document.
http://support.apple.com/kb/TS1490
B-rock -
I am having problems saving documents back to SharePoint when any of the document properties (metadata columns) are set to be "managed metadata". The check-in/save fails with error:
The document could not be saved. The server said:
“The operation failed because an unexpected error occurred. (Result code 0×80020005)”
Please ensure you have completed all required properties with the correct information and try again.
I have seen similar threads that suggest this is a known issue with this version of Acrobat but I would like conformation from Adobe that this is a known issue and whether it is fixed in a newer version?
Adobe Acrobat version 10.1.13
SharePoint 2010Hi quodd,,
We are sorry for the issue being faced by you. I need some information from you so that I take further steps:
1. Which Adobe product are you using Acrobat or Adobe reader- what is the complete version?
2. How are you opening and saving the PDF, the exact workflow?
Are you doing it from within Adobe Reader/Acrobat application or opening it from browser, doing changes and saving it using browser itself.
3. Can you try to save a PDF to library with Custom template and managed metadata columns using browser directly.
4. Please verify that columns name do not contain spaces or some other special characters.
Can you try to save PDF to library with Custom template and just a single managed metadata column with a simple name
Thanks,
Nikhil Gupta -
I have problems with the 'installation of creative cloud. Error Code: 205
I have problems with the 'installation of creative cloud. Error Code: 205 What can I do to fix this?
Errors 201 & 205 & 206 & 207 or several U43 errors
-http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html -
Attempting to copy to the disk failed. An unknown error occured (-4)
I am simply trying to sync my son's iTouch with iTunes and I get the following error:
"Attempting to copy to the disk failed. An unknown error occured (-4)"
All my software (e.g.: iTunes) and the iOS is fully up-to-date.
iTunes (v.12.1.0.50)
OSX Yosemite Version 10.10.2 (14C109)Hello there, Wyrzezbiator.
The following Knowledge Base article offers some great steps for the very issue you're describing:
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/ts3694#4
Configure your security software
Related errors: 2, 4, 6, 9, 1000, 1611, 9006, 9807, or 9844. Sometimes as a result of this issue, a device might stop responding during the restore process.
Check your security software and settings, which can block ports and prevent connection to Apple servers during update and restore.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
I'm having problem downloading the complete suit. Only 41% has downloaded and it says this "Creative Cloud desktop failed to update.(Error code: 50) Contact Customer Support
Meresianak73703965 have you utilized the steps listed in Error "Failed to Install" Creative Cloud Desktop application to reinstall the Creative Cloud Desktop application?
-
I am using Windows 7, 64 bit, Adobe 8.1 Professional, ActivClient Agent, with CAC card
Trying to sign a document digitally however I keep getting : The windows Cryptographic service provider an error: the keyset is not defined. Error code: 2148073497
-I have tried by deleting my certificates off the computer and reinstalling, this did not help.
-I have tried rebooting the computer, this did not help.
-I google the error message and can't locate any step by step instructions to fix this problem.
Could use some assistance. Please do not assume I'm top of line knowledgeable in Adobe when giving me a fix. That is the reason I am looking for step by step instructions. Thanks.
Navy ChiefHi Chief Mendenhall,
It's really a Microsoft error, not a Acrobat error, but I know that doesn't make the inability to sign any less frustrating. This probably has something to do with the communication bridge between Acrobat, Windows, and the CAC software. I know you're not responsible for software upgrades, but is there any chance you can download the free Adobe Reader (Adobe Reader Install for all versions). Even though Reader doesn't have the same editing capability as Acrobat Pro, it will allow you to sign a PDF file, and what I'm looking to see is if this is somehow related to the age of version 8.1, which is well past its end-of life. Even version 9 in longer supported.
Thanks,
Steve -
CR XI R2: Database logon failed. Database Vendor Error Code: 1005
Hi:
I am trying to incorporate Crystal Reports XI R2 with in-house application - Windows platform, Oracle9i, Websphere Studio Application Development 5.1, and JVM 1.4.2 with OCI8 driver and JNDI connection.
I am not getting any error while running it in the project where I first implemented. If I import a EAR file from that project and deploy it in another project and run it, I am getting error in the new project as follows:
[10/23/08 18:43:11:843 IST] 40994099 SystemOut O ERROR - JRCAgent4 detected an exception: Database logon failed. Database Vendor Error Code: 1005
at at java.lang.Throwable.<init>(Throwable.java)
at at java.lang.Throwable.<init>(Throwable.java)
at at com.crystaldecisions.sdk.occa.report.lib.ReportSDKExceptionBase.<init>(Unknown Source)
at at com.crystaldecisions.sdk.occa.report.lib.ReportSDKLogonException.throwReportSDKLogonException(Unknown Source)
at at com.businessobjects.reports.sdk.b.i.if(Unknown Source)
at at com.businessobjects.reports.sdk.b.i.a(Unknown Source)
at at com.businessobjects.reports.sdk.b.i.byte(Unknown Source)
at at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)
at at com.crystaldecisions.proxy.remoteagent.y.a(Unknown Source)
at at com.crystaldecisions.proxy.remoteagent.r.a(Unknown Source)
at at com.crystaldecisions.sdk.occa.report.application.cf.a(Unknown Source)
at at com.crystaldecisions.sdk.occa.report.application.cf.a(Unknown Source)
[10/23/08 18:43:27:234 IST] 40994099 SystemOut O ERROR - JRCAgent4 detected an exception: Some parameters are missing values
at at java.lang.Throwable.<init>(Throwable.java)
at at java.lang.Throwable.<init>(Throwable.java)
at at com.crystaldecisions.sdk.occa.report.lib.ReportSDKExceptionBase.<init>(Unknown Source)
at at com.crystaldecisions.sdk.occa.report.lib.ReportSDKParameterFieldException.throwReportSDKParameterFieldException(Unknown Source)
at at com.businessobjects.reports.sdk.b.i.a(Unknown Source)
at at com.businessobjects.reports.sdk.b.i.a(Unknown Source)
at at com.businessobjects.reports.sdk.b.i.byte(Unknown Source)
at at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)
at at com.crystaldecisions.proxy.remoteagent.y.a(Unknown Source)
[10/23/08 18:43:28:359 IST] 40994099 SystemErr R Exception at EPFPageFactory.getPage: java.lang.Exception: Error in EPFImapgeObjectInstancesBase.getInstanceProperties: null epfImage.
Any help or suggestions would be highly appreciated.
thanks,
PrakashI suspect it is probably just a WSAD configuration issue. If you have simply moved the EAR from one project to another, it might be missing some libraries or the some of the libraries may have been corrupted in the move, or it might be a problem with the build path. Try deleting and readding the JRC libraries to the project. If you are deploying to the test server within WSAD, try creating a new instance of it and deploying the project on the new instance.
-
Creative Cloud desktop failed to update.(Error code: 1)
Hello, I'm running a MacBook Pro Retina with Yosemite 10.10.2. I tried to update Creative Cloud Desktop manager and then tried to cancel it (it was killing my bandwidth while I was trying to work). It disappeared from the bar at the top of the OSx screen.
I couldn't get it back. I restarted my machine. When I clicked on Creative Cloud this time, I was prompted to update, but almost immediately got an error. There are other mentions of Error Code 1 on the forum, but they appear to be first time installations, not updates. Suggestions welcome! Thanks
Creative Cloud desktop failed to update.(Error code: 1)
Update:
Still no success. I tried the instructions here: Error "Failed to Install" Creative Cloud Desktop application which says to uninstall Creative Cloud. I got an error: "Unable to uninstall Creative Cloud Desktop. Quit Creative Cloud desktop and try again." But CC desktop is not running. I had a look in activity monitor and didn't see anything.Okay - I think I resolved this by closing some stalled processes in Activity Monitor, then restarting Creative Cloud desktop, then updating in the normal way.
Maybe you are looking for
-
How to connect printer, win laptop, & anroid phone through router
Without knowing the specifics. Cloud Print. http://www.google.com/cloudprint/learn/
-
Do I need to install Font files after adding new languages to EBS
Hi All, I added Spanish and Portuguese languages to my 12.1.3 EBS (Enterprise Linux 5). As per post steps of MOS doc 788053.1, I just wanted to confirm whether I need to execute the step to install font files or not: I need to do if one of below cond
-
Openings for 2 to 3 years experience with LabVIEW in Chennai / Coimbatore
We are hiring at #Yashika Industries for #LabVIEW developers with#2to3years of experience working with small and medium/ large scale #LabVIEW projects, experience working with #NIcRIO platform,#LabVIEWRT #LabVIEWFPGA is a plus. #CL
-
Can remote developers connect to a CF host
Our LAN has a small server with CF and a SQL Server database and our Flex projects are set to ColdFusion Flash Remoting Service. The server has a fixed IP, but at the moment this is only linked to inetpub. We now have a developer with Flex Builder on
-
This is driving me crazy. My Mac Mighty Mouse (hardwired, not airborne, and not the new MagicMouse or whatever the digitally stimulated mouse is called) will NOT SCROLL DOWN. It will scroll up and sideways. But it won't go down, like that evening sun