Windows 7 / 2008 R2 GPO for Screen timeout not working.

What a joke. Why can't I get a simple screen saver to work VIA gpo with Windows 7 / 2008 R2? What is the fix?
User Config\admin templates\control panel\Personalization---Enable Screen Saver - Enabled, Prevent Changing Screen Saver -Enabled, Password protect the the screen saver - Enabled, Screen Saver Timeout - Enabled.
Number of seconds to wait to enabled scrren saver = 600 seconds.
I have verified these settings via RSOP.msc and group policy modeling. What do I need to get this working!
HELP WITH THIS SIMPLE TASK PLEASE!!!!!!!!!!!!!!!!!!!!

Hi Dave Santel,
Please run the following command on the problematic workstation.
Gpresult /h > %temp%\gpresult.html (“%temp%”
is the path of the gpresult.html, you can set it yourself)
Please check this file gpresult.html which is used for checking the resultant of Group Policy information to see if the GPO has applied.
Regards,
Lany Zhang

Similar Messages

Cold fusion 9 Installation on Windows server 2008 (IIS 7.0) - IIS websites not working ?

I am having a 64 bit machine on which windows server 2008 R2 is installed. IIS 7.0 is configured and running on it. on which I have my organisations main website. I have to install Cold fusion on this machine as some of my site pages are designed with CF.
I used all the default settings for installing cold fusion 9. It got completed succefully. But after I restarted my system and tried accesing my ASP.net website it was not loading the page. Text getting displayed was only as follows '<script> src="'. Later I unsistalled CF and my site was working fine.
Please can any one guide me to successfully install Cold fusion without disturbing my main site deployed on IIS ?

Sarfarajms, I don't recognize what about the CF install would conflict with ASP.NET, but I'll note this:
If you downloaded CF 9 recently, you are still running 9.0--which does NOT formally support IIS 7. If you followed the steps about enabling IIS 6 compatibility and such (in the install guide or some blog entry), perhaps that caused the conflict.
Instead, you will want to install 9.0.1 (CF 9 Updater 1, which is NOT provided in the current 9.0 install). THAT is the first release to formally support IIS 7. And if you read the updater installation guide (http://www.adobe.com/support/documentation/en/coldfusion/901/cf901install.pdf), it discusses how to deal with the upgrade depending on what you had done with respect to IIS, starting at the bottom of its page 8.
Hope that helps.
/charlie

Lock Screen Timeout not working since upgrade to 10.2?

I have always had by Lock Screen Timeout set to 3 mins but since 10.2 upgrade it now appears to be hardcoded to what seems to be about 15 to 30 minutes. Anyone else having this problem?
This is a bit of security problem if you rely upon screen lock to secure your personal data from unauthorised access. If I put the phone down I want to be assured that it will lock out quite quickly.
I suspect that the problem is caused by Lock Screen Notifications so I have switched that off for now to see if it helps. I allow Gestures when locked to unlock the screen. Tend to use the power button to lock. Use gesture to unlock.

Try a reset: when powered on hold down the power button for 10 seconds.
You can restore your phone to factory settings if you wish to see if it corrects your issue. Resetting to factory settings will wipe out all your data so you should save it first. To save all your stuff download and install BlackBerry Link on your computer from the link below. Resetting will not back-up the OS on your phone. Once you have downloaded and installed BlackBerry Link connect your phone to your computer and save your stuff. Once saved disconnect your phone from the computer.
To reset your phone: tap the Settings App, scroll down and tap Security and Privacy, tap Security Wipe, tap the blank box and enter blackberry.
Once Wiped reconnect your phone to your computer and install your stuff.
http://us.blackberry.com/software/desktop/blackberry-link.html
http://ca.blackberry.com/software/desktop/blackberry-link.html

Windows Server 2008 R2 DNS Entry Auto remove not working

Dear All,
I have configured DNS Ageing for 30 days removal of unwanted host entry.but it will not work.
Active directory DNS having all unwanted host in forward lookup zone and as well as reverse lookup zone.
how to solve this ?
pls help
Sunil
SUNIL PATEL SYSTEM ADMINISTRATOR

Hi,
This is a rather common problem when configuring Scavenging and Aging of stale DNS entries. This has to be set in two spots, not just one as so many admins have difficulties with. It isn't very obvious.
Aging and Scavenging must be set on both the DNS Server and on the Zone
that you want to clean. In addition, DNS needs to be Active Directory integrated and resource records need to be dynamically registered. Static entries are ignorned.
First step:
To set aging and scavenging properties for the DNS Zones using the Windows interface
Open DNS Manager.
In the console tree, right-click the applicable DNS server, and then click
Set Aging/Scavenging for all zones.
Select the Scavenge stale resource records check box.
Modify other aging and scavenging properties as needed.
Second Step:
To set aging and scavenging properties for the DNS Server using the Windows interface
Open DNS Manager.
In the console tree, right-click the applicable DNS server, and then click
Properties.
Select the Advanced tab,and then enable Enable automatic scavenging of stale records
check box. Once done, specify the Scavenging period (That is recurring
interval for Scavenging on a DNS server) and click on OK
That will do it. Your DNS entries will then start auto scavenging based on the times you have determined. Word of caution - do not set your aging too aggressively - I have seen where an admin had set aging down to 1 day and when it finally kicked
off, nearly brought the company to a halt.

After i made update to ios system the auto brightness for screen is not working any more although i am turning it on

Before i make update the auto brightness was working properly
The screen was very low bright in the dark automatically and high bright in light
But now after i made update it is nit working
I am surprised that apple system is not stable
Please support
<Email Edited By Host>

This is a user to user support forum and not Apple employees so it is best to not post your email address in an open discussion group.
Have you tried a reboot of the iPhone? Hold both the power and home buttons until the apple logo appears and it restarts, ignoring the red slider if it appears.
My iPhone went to full brightness all the time after updating to iOS 6.1.3. A reboot seems to have helped make it work as it should. Also check Settings > Brightness and Wallpaper and see how it is set, reduce the brightness level it is too bright for you.

Ask for password after screen lock not working!?

Ask for password after screen lock not working? It used to work before mavericks, each time my computer display sleep I'm asked for the password immediately. Now it never asks for it?

From 2008 MacRumors discussion:
SOLUTION: Browse to Home>Library>Preferences and drag com.apple.systempreferences.plist to the desktop.
Caused by a corrupt user preferences file. On restart, you may find user settings have defaulted. Set up as desired.
Worked for me.

Hi I was just wondering, if my iPod nano's serial number says that it is eligible, but its screen is not working, am I still eligibile for the iPod nano 1st gen replacement?

Hi I was just wondering, if my iPod nano's serial number says that it is eligible, but its screen is not working, am I still eligibile for the iPod nano 1st gen replacement?

Yes. They'll still replace your iPod. Several users have indicated that they have returned damaged iPods and were still given a replacement iPod.
B-rock

HT201406 my ipad touch screen is not working please give solution for it.

my ipad touch screen is not working please give solution for it.
i have connected ipad to itunes and done it restore seetings then also my touch is not working but
when i connected ipad to i tunes inside functions are working properly but touch screen is not working what can i do

If you have a screen protector on the iPad's screen, try removing it. If you don't or that doesn't help, and restoring the iPad to factory settings has not corrected the problem, then the iPad probably has a hardware problem and will need to be taken or sent to Apple for replacement.
Regards.

Navigation for screen is not supported

Dear experts,
I am translating a screen and i can see the changes on this system from every clients. but when i want to transport changes to target sistem i am creating a request from se38 with report RS_LXE_RECORD_TORDER. then i am assigning what it wants, when i am looking from se01 to my trasport of changes request there are object list. but if i am clicking twice on it the status message is "navigation for screen is not supported". after transport i can't see the changes on target sistem. how can i solve this problem?
Thanks

No cross posting
Read the "Rules of Engagement"
Regards
Juan

HT1349 Actually, my iphone was hanged and its screen was not working at all .So, I updated its software from market but for reactivation it require icloud account but i didn't know how exactly it is and i was caught in big trouble . But i have its box and

Actually, my iphone was hanged and its screen was not working at all .So, I updated its software from market but for reactivation it require icloud account but i didn't know how exactly it is and i was caught in big trouble . But i have its box and all other accessories .So , kindly help me as early as possible .Thankyou and tell me about its solution
<Email Edited by Host>

Basic troubleshooting steps outline in the manual are restart, reset, restore from backup, restore as new. Try each of these in order until the problem is resolved. If you've been through all these steps and the trouble persists, you'll need to bring your phone to Apple for evaluation. Be sure to make an appointment first at the Genius Bar so you won't have a long wait.
Best
GDG

Hi my name is Aditya. i am using ipad 2. 2 days ago my ipad fall down from my hand and now its screen is not working it is totally blank but shocking thing is that when i take a screen shot the display came back for 2-3 second. any one like me?

hi my name is Aditya. i am using ipad 2. 2 days ago my ipad fall down from my hand and now its screen is not working it is totally blank but shocking thing is that when i take a screen shot the display came back for 2-3 second. dose ne 1 have same problem....?

Anyone have any suggestions? or is everyone else just as clueless as me !

Lenovo Yoga 13 Screen is not working

Hi Guys!
Please go through my complete message as it is very 'painful' experience you can ever come across when buying a laptop.
The Lenovo Yoga is not available in Australia. So, I bought the Lenovo Yoga 13" orange i5 128GB from 'adorama.com' for US $999 + UPS shipping $105. Unfortunately the shippment attracted a custom of 185 AUD which I had to pay later. In total, I have already spent 1400 AUD.
The UPS courier service delivered the shipment to my address an hour back i.e. today on 5th July,2013. I was very happy to receive the product but when I switched on the laptop, the screen is not working properly and is displaying a number of vertical colored lines.
To confirm that it is the screen problem, I connected the laptop to my TV with a HDMI cable upon which I could see the windows display on the TV. This clearly establishes the fact that the laptop's screen is faulty.
Next, when I checked the warranty number online it shows that warranty starts from three months earlier than my purchase date which clearly shows that someone registered the laptop before.
Also, the charger I received with the laptop looks to be a used one with scratches and marks on it.
I am afraid, the product I got from Adorama is damaged and maybe a refurbished one as the charger clearly looks to be used before. I am deeply disappointed with this incident as I was very excited to use that product and also importantly had lots of work to do with it.
I contacted Adorama, and they are saying that they might exchange/ refund after seeing the product for which I have to ship back the product to the United States. They have asked me to provide a quotation of the shipment and told me that they will decide accordingly.
Firstly, I dont know how it will work out and next, I cannot trust these people anymore to refund me the money after returning the product. I am anyways losing the money I paid on customs.
Therefore, as being my fellow Lenovo Yoga mates, I request your advise on this issue to me. I would really appreciate whatever it is.
I kindly request Lenovo to look into this matter.
Thank you!
Amer

I have exactly the same problem just a set of vertical lines on the screen. Never before have I had such a pathetic problem except maybe with laptops that are 6 years old.
For further details I have the Lenovo IdeaPad Yoga 13-inch Convertible Ultrabook (Orange) - (Intel Core i7 3537U 2.0GHz Processor, 8GB RAM, 128GB SSD, WLAN, BT, Webcam, Integrated Graphics, Windows 8) bought from amazon.co.uk ( http://www.amazon.co.uk/exec/obidos/ASIN/B00CA10NUE ).
The screen lasted 6 days before dying. Just enough time for me to waste getting it perfectly set up before it died. There was nothing to indicate prior to the screen failing that it was going to fail. Turned it off one night and turned it on the next morning and the screen was only displaying the vertical bars.
I'm going to try sending the Laptop back to Lenovo. I actually managed to get through to the Lenovo support - they have quite a good system of dropping the laptop off in a local shop that is then picked up by Lenovo, they reckon to have a turn around of 10 calendar days. I can recommend trying to call the Belgium helpdesk as Lenovo can never outsource the help desk people since they need to speak French and Dutch but usually they will also speak English - start the conversation with "Parlez vous anglais?" / "Spreek je engels?" . Admittedly it will be no use if you need to return the item, but if you just need a bit of technical support it might be a good way to go.

Screen willl not work

my screen will not work, ive restared it numerous times and i have also restored it and it still wont work, what should i do?

i am having this same problem. i have a iphone edge running 2.2.1 the screen has a crack but this has never been a problem. After getting frustrated with the phone i left it alone for a few months. I went back to it and restored it many times and got it working. however this only lasted for a few days im am now back to a unresponsive screen now nothing i can do is working. i have dealt with the apple store before and would prefer not to again. any help fixing this would great i bought the phone in nov, 2008 and it has worked great till now.

Screen Rotation not working

I have upgraded my laptop from Windows 8.1 to Windows 10. Since upgrading the Screen rotation function is no longer available or working. When checking in the property part the following message is displayed. no Pen or touch input available for this display?

Hi ,
Thank you for visiting the HP Forums! A great place where you can find solutions for your issues with help from the community!
I came across your post about the Notebook, and wanted to assist you! I have looked into your issue about your HP Pavilion x360 Notebook and Screen Rotation not working after an update to Windows 10. Here is a link to configure the touch display to identify your screen as a touch screen. The document is for Windows 8 but the procedure is the exact same troubleshooting.
Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system at the time of purchase or that need updating. If your computer is having problems finding and installing operating system updates, try using the Windows Update Troubleshooting tool to fix the problem.Here is a document that shows how to update drivers that are not working correctly with Windows 10.I hope this helps. Thanks.

My USB port (closest to the screen) is not working? And what is an IR Receiver in my USB port?

Hi everyone,
     I recently found out that my USB port, closest to my screen, is not working. Before I called Apple Care for help, I performed a PRAM and a SMC RESET, which unfortunately did not work. I called Apple Care and they help me troubleshoot simple resets such as, shutdowns and restarts. The representative I spoke with conluded that the physical hardware has an issue and must be brought to the Apple Store for a diagnosis. I called the Apple Store to at least budget the fee for getting a USB port fixed and it's about $300.00. I never dropped my macbook or had any sort tactile encounterment with hard surfaces by dropping or hitting. I don't understand how my macbook pro would be physically damaged. I then thought maybe my software was out of date (right now I am running 10.9 Mavericks) or I forgot to do the minor software updates, but I was at a lost again because my macbook is up-to-date. I searched for further help and found a way to monitor what's plugged into my usb ports. (I read in the apple forums that a girl had nothing in her usb ports, but upon looking at the System Information> Hardware> USB, that the macbook recognizes that there are drives in the ports) I looked at my ports; one is being used by wirless mouse (the port that works) and the other (the port that doesnt work) is being used by an "IR RECEIVER". Now, is the IR Receiver actually using that port and that's why my macbook cannot recognize other devices inserted into that port? Or is the IR RECEIVER suppose to be in that port and that the hardware for that port is simply damaged (which would mean I need $300.00 to get that fixed)? I know this is a lot, but someone help me?
(PORT THAT WORKS)
USB Hi-Speed Bus:
Host Controller Location:          Built-in USB
Host Controller Driver:          AppleUSBEHCI
PCI Device ID:          0x1c2d
PCI Revision ID:          0x0005
PCI Vendor ID:          0x8086
Bus Number:          0xfa
FaceTime HD Camera (Built-in):
Product ID:          0x8509
Vendor ID:          0x05ac (Apple Inc.)
Version:           5.16
Serial Number:          DJHBAJ06VRDH7FL0
Speed:          Up to 480 Mb/sec
Manufacturer:          Apple Inc.
Location ID:          0xfa200000 / 3
Current Available (mA):          500
Current Required (mA):          500
Hub:
Product ID:          0x2513
Vendor ID:          0x0424 (SMSC)
Version:           b.b3
Speed:          Up to 480 Mb/sec
Location ID:          0xfa100000 / 2
Current Available (mA):          500
Current Required (mA):          2
Microsoft® Nano Transceiver v2.0:
Product ID:          0x0745
Vendor ID:          0x045e (Microsoft Corporation)
Version:           6.34
Speed:          Up to 12 Mb/sec
Manufacturer:          Microsoft
Location ID:          0xfa130000 / 6
Current Available (mA):          500
Current Required (mA):          100
Apple Internal Keyboard / Trackpad:
Product ID:          0x0252
Vendor ID:          0x05ac (Apple Inc.)
Version:           1.18
Speed:          Up to 12 Mb/sec
Manufacturer:          Apple Inc.
Location ID:          0xfa120000 / 5
Current Available (mA):          500
Current Required (mA):          40
BRCM2070 Hub:
Product ID:          0x4500
Vendor ID:          0x0a5c (Broadcom Corp.)
Version:           1.00
Speed:          Up to 12 Mb/sec
Manufacturer:          Apple Inc.
Location ID:          0xfa110000 / 4
Current Available (mA):          500
Current Required (mA):          94
Bluetooth USB Host Controller:
Product ID:          0x821a
Vendor ID:          0x05ac (Apple Inc.)
Version:           0.42
Speed:          Up to 12 Mb/sec
Manufacturer:          Apple Inc.
Location ID:          0xfa113000 / 8
Current Available (mA):          500
Current Required (mA):          0
(PORT THAT DOESN'T WORK)
USB Hi-Speed Bus:
Host Controller Location:          Built-in USB
Host Controller Driver:          AppleUSBEHCI
PCI Device ID:          0x1c26
PCI Revision ID:          0x0005
PCI Vendor ID:          0x8086
Bus Number:          0xfd
Hub:
Product ID:          0x2513
Vendor ID:          0x0424 (SMSC)
Version:           b.b3
Speed:          Up to 480 Mb/sec
Location ID:          0xfd100000 / 2
Current Available (mA):          500
Current Required (mA):          2
IR Receiver:
Product ID:          0x8242
Vendor ID:          0x05ac (Apple Inc.)
Version:           0.16
Speed:          Up to 1.5 Mb/sec
Manufacturer:          Apple Computer, Inc.
Location ID:          0xfd110000 / 3
Current Available (mA):          500
Current Required (mA):          100

I can help with the "IR Receiver" part of your question. That's the piece of hardware inside older MacBook Pros (MBPs) that lets them work with the Apple Remote. "IR" is the standard abbreviation for "infrared," the portion of the electromagnetic spectrum used by remotes for many common devices (stereos, cable boxes, Apple TVs, etc.). The remote sends a coded stream of IR pulses; a corresponding receiver in the target device "sees" the infrared light and decodes it. The MBP's internal IR Receiver sends the received signals to the processor via USB through an internal hub.
The most recent MacBook Pros have dropped the IR receiver and no longer work with the Apple Remote.

Windows 7 / 2008 R2 GPO for Screen timeout not working.

Similar Messages

Maybe you are looking for