Windows 7 64-bit 0xC004E003 error when validating registration code

I am the original owner (2010-03-31) of an ASUS K0IJ laptop that came with Windows 7 64-bit pre-installed.
Windows 7 has run properly for almost exactly two years.  As of this afternoon, I suddenly began receiving "This copy of Windows is not genuine" errors.  Yes, errors  — I am the original and legitimate owner of this computer and
its OEM disc.  I also ran the registration process when I first purchased the computer.
Running WindowsActivationUpdate.exe did not correct this problem.
In Computer —> Properties —> Windows Activation, the "Supply a Different Activation Key" tool will not accept the original OEM license key that has worked for two years. 
If instead I try using the other W7 serial number I have for this computer, I receive the aforementioned 0xC004E003 error.  Moreover, the process does not offer me any other working options such as phone registration: I instead get caught in a "site
loop" where I am referred around and around in a circle to the same set of three or so unhelpful pages.
The MGAdiag.exe tool returned the following:
------ Begin MGAdiag.exe output ------
Diagnostic Report (1.9.0027.0):
Windows Validation Data-->
Validation Code: 50
Cached Online Validation Code: 0x0
Windows Product Key: *****-*****-2QWT6-HCQXJ-9YQTR
Windows Product Key Hash: PVjSC5x6njvqunmbCY3lOD7rYDo=
Windows Product ID: 00359-OEM-8992687-00007
Windows Product ID Type: 2
Windows License Type: OEM SLP
Windows OS version: 6.1.7601.2.00010300.1.0.003
ID: {843BC42F-FD4C-41D8-9D79-5D7C36808118}(1)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/A, hr = 0x80070002
Signed By: N/A, hr = 0x80070002
Product Name: Windows 7 Home Premium
Architecture: 0x00000009
Build lab: 7601.win7sp1_gdr.130104-1431
TTS Error:
Validation Diagnostic:
Resolution Status: N/A
------ Begin MGAdiag.exe output ------
At the risk of stating the obvious, I'm not only frustrated, I'm angry. I am the original owner of this computer which I purchased from a legitimate dealer, and the computer is running the instance of Windows 7 64-bit that came with it.
Why is Microsoft subjecting me  to this insult and aggravation?
Sincerely,
sfosparky

Are you reading the activation key correctly? Did you call Microsoft or Asus and ask them about the problem. You can also set the laptop back to factory specs (But will lose everything you put on it after you bought it) and it should self activate. I'd be
on the phone to Asus and if that doesn't help call Microsoft.
Found the following on the internet.
The problem appears to be in the Licensing Store - please try the following.....
Recreate the Licensing Store with the correct data.
1)Go to the SYSTEM32 folder on the C drive
2)C:/Windows/System32
3) Find the file CMD.exe
4) Right-Click on CMD.exe and select 'Run as Administrator'
5) Type: net stop slsvc (it may ask you if you are sure, select yes)
6) Type: cd %windir%\ServiceProfiles\NetworkService\AppData\Roaming\Microsoft\SoftwareLicensing
7) Type: rename tokens.dat tokens.bar
8) Type: cd %windir%\system32
9) Type: net start slsvc
10) Type: cscript slmgr.vbs -rilc (It may take a long time for this to complete, please be patient)
11) Restart your computer twice. 
You may be asked to enter your COA Key and/or Activate. – if asked for the Key, use the one on your COA sticker on the machine’s case

Similar Messages

  • Quick Time 7.0 Pro (7.7.3) on Win 7 Home Prem 64-bit, Pro paid for, valid registration code, Open Image Sequence (and resulting time-lapse movies) has quit working after several successful operations.  What do?  How fix? Thanks.

    Quick Time 7.0 Pro (7.7.3) on Win 7 Home Prem 64-bit, Pro paid for, valid registration code, Open Image Sequence (and resulting time-lapse movies) has quit working after several successful operations.  What do?  How fix? Thanks.

    This tip is ready for submission.
    It REPLACES the prior version in the Time Machine forum, at: http://discussions.apple.com/thread.jspa?threadID=2057525
    Additions/wording changes to items C3, C4, C5, D4
    New topics C9, C10, C11, and E4

  • Error occurred in deployment step 'Install app for SharePoint': There were errors when validating the App manifest.

    Hi everyone,
    I `m getting error message like this  "Error occurred in deployment step 'Install app for SharePoint': There were errors when validating the App manifest.". when i try to debug the application with "Start Action"="Internet Explorer".This
    application  is  an apps for office application with Oauth with Office 365
    Any help in this regard is greatly appreciated 
    Thanks!!
    Santosh Sutar

    Thanks Fei for your time.
    >>>I would suggest that you create a new project and set it start action with 'Internet Explorer'
    to see whether this issue could be reproduced.  If no, we can compare the difference between the two menifest files.
    As per your suggestion above ,With new project,I can debug with with start action "Internet Explorer" and I
    could not see much difference between the manifest files.
    Please find below my manifest file for the reference .
    <?xml version="1.0" encoding="UTF-8"?>
    <!--Created:cb85b80c-f585-40ff-8bfc-12ff4d0e34a9-->
    <OfficeApp xmlns="http://schemas.microsoft.com/office/appforoffice/1.1" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="TaskPaneApp">
      <Id>084cd6cd-2908-44d1-a5cf-4fa029aec211</Id>
      <Version>1.0.0.0</Version>
      <ProviderName>[Provider name]</ProviderName>
      <DefaultLocale>en-US</DefaultLocale>
      <DisplayName DefaultValue="Office 365 MVC" />
      <Description DefaultValue="Office 365 MVC"/>
      <AppDomains>
        <AppDomain>https://login.microsoftonline.com</AppDomain>
      </AppDomains>
      <Hosts>
        <Host Name="Document" />
        <Host Name="Workbook" />
      </Hosts>
      <DefaultSettings>
        <SourceLocation DefaultValue="~remoteAppUrl/Home/Index/" />
      </DefaultSettings>
      <Permissions>ReadWriteDocument</Permissions>
    </OfficeApp>
    Please suggest on this.
    Thanks !!
    Santosh Sutar

  • 'Install App for SharePoint' There were errors when validating the App Package

    Hello,
    When testing with an app, I tried to add an
    app event receiver before learning that remote event receiver are not allowed with
    Sharepoint-hosted app. So I reseted the Handle app installed and
    Web Project properties of my project and tried to redeploy and this error occurred :
    'Install App for SharePoint' There were errors when validating the App Package
    Something other than the project's properties have been modified but I don't know what.

    I think the best way to figure real reason out is to look at ULS logs.
    This is example, what I had:
    Unexpected        App Packaging: CreatePackage: Unexpected exception: There were errors when validating the App package: There were errors when validating the App Package. Other warnings / errors associated with this
    exception:  The current version of SharePoint is less than the SharePointMinVersion specified in the app manifest. CurrentVersion='15.0.4693.1000', SharePointMinVersion='16.0.0.0'.

  • [Windows] file.url throw error when application executable in root directory

    Here is the bugbase ticked: Bug#3940278 - [Windows] file.url throw error when application executable in root directory
    If you launch AIR application packaged as bundle from root directory and try to get url property of any file you get IllegalOperationError.
    No matter what file url property you try to get.
    It's a big problem when you distribute your application on CD disks or flash drive.
    I'd like to ask everyone affected by this issue to take a minute and vote for the following bug.
    Thanks.

    I checked all deployment descriptions and there are no references to t3://localhost:7001. Few months back, I had the complete clustering setup working on 2 machines and now when I deploy my application on same configuration, it fails with t3://localhost:7001 unreachable error. I created a new cluster configuration on one machine with 2 managed server and it deploys fine. Can not figure out what has changed ?

  • Error when validating

    is it possible to put in the when-validate-item trigger a method to catch a specific error ie i am getting the FRM-50016 error when validating. This is fine and is expected but I want to display this information to the user as a message or so so do i put in the when-validate-item trigger:
    if error 50016 then
    end if
    or something along those lines?
    Thanks.

    You can use an Annonymous Block in your When-Validate-Item (WVI) trigger, which will allow you to handle any Exceptions that occur within the annonymous block. Unless you need specific logic to occur as a result of the exception, typically, you would handle the exception in the On-Error trigger. For example:
    /* WVI */
    BEGIN
       ... Trigger logic here ...
    EXCEPTION
       WHEN OTHERS THEN
           IF Error_Code = 50016 THEN
               ... Exception Specific Logic here ...
           END IF;
    END;Personally, I prefer to keep this type of Exception Handling in the On-Error trigger.
    Hope this helps,
    Craig B-)
    If someone's response is helpful or correct, please mark it accordingly.
    Edited by: CraigB on Nov 10, 2010 9:57 AM

  • Made an error when validating giftcard can I try again ?

    Made an error in validating itunes gift card screen said the card was redemmed but to inaccurate email address therefore couldn't be verified.can I re redeem card or get money credited to new account ?

    Try here >  Mac App Store: "An unknown error occurred (100)" when purchasing

  • Error when launching transaction code CRMBS02

    Hello all...whenever we attempt to launch the t-code CRMBS02 or BS02, we get a popup that says:
    Error in object editing: This syntax cannot be used for an object name
    Selecting the documentation drop down provides:
    Message no. TK103
    Diagnosis
    The syntax of the transferred objects is incorrect. R3TR BSVS  made this check.
    This could be caused by the following:
    The object type R3TR BSVS is unknown
    The syntax of the object name  is incorrect
    The object is a component of a system object
    System Response
    The function terminates.
    Procedure
    Correct the syntax.
    Any suggestions?  When this occurs, it does not enable editing and allows for display only.  I have SAP_ALL assigned to the user, so I don't see any authorization errors when I trace the transaction code.
    Suggestions? 
    Thanks in advance!
    Joe

    Hello Joe,
    Tasks template of type T and Workflow Task of type WF, are no more used after release 45b. The were substituted by the TS Templates and by Workflow Template.
    Please notes: 114811 -
    From release 4.5 onwards only WS/TS tasks can be created via the standard workflow editor transaction however WF tasks created in previous releases may still be maintained.  If it is important to be  able to create WF flows in release 4.5 then you may still do so with  transaction PFWF. This transaction has been removed from the menu to  encourage the use of WS flows wherever possible.
    A copy utility to copy WF flows and it's components to WS flows will be made available to speed up the transfer to client independent flows.
    "Check also note: *152871    Release Upgrade considerations for workflow 3. WS / WF workflows (all releases)
    "From Release 3. 1 onwards, it is possible to create customer workflows
    of type 'WS'.
    Solution: If you have 'WF' workflows, they will continue to run after an upgrade. You can modify them too. However, some of the new features of future releases only apply to 'WS' workflows. See note 114811 for a complete discussion of this subject.
    You should pass from T and WF templates to the New WS and TS templates.
    1) In relation to workflows of type 'WF' (Workflow Task) and task 'T' they have not been developed since release 40B, instead the Workflow Template (WS) was introduced and Tasks 'TS'. This error has seldomly
    been observed in the case of  trying  to work with WFlow tasks of type WF instead of type WS.
    Existing WF will run also in higher releases, however if you change a WF task in a higher release it may produce dumps or numerous errors. This is valid too for Tasks.
    Please refers to note 114811.
    If you want to change them please copy them first to templates type WS or TS rather than WF or T. Use PFTC in order to copy them and then you can make the changes and you will have much more functionality than type
    WF or T.
    Additional Inforamtions:
    Note 1068627 - Composite note about workflow upgrade
    thanks
    Willie

  • Error when executing Java code, java.lang.NoClassFoundError:

    Hi, I am new learner in Java Programming and I am using J2SDK and notepad to write a code. I don't have problem in compiling using javac filename, however I received an error when executing using java filename.
    The error message I got is Exception in thread "main" java.lang.NoClassDefFoundError: Hello/jawa.
    I have verified this simple code - Hello has no issue but somehow it does not run. I even try to compile and execute in other computer also the similiar error returned.
    My Client Platform is Windows XP Professional.
    I would appreciate any expert can help to suggest me the knowledge/solution to fix this kind of error. Thanks
    Jackie

    It looks like you entered the command "java Hello.java" or "java Hello/java" (I assumed 'jawa' was a typo.)
    You should have entered "java Hello" if your class name is Hello. I am guessing that Hello.java is probably the source code file name. The argument to the java command is the fully qualified class name. "java Hello.java" tells the java command to look for a class named java that is in the Hello package.

  • Error when reading preview code

    While loading images to LR 5 I received the following,
    "Lightroom encountered an error when reading from its preview code and needs to quit.
    Lightroom will attempt to fix this problem the next time it launches."
    Every time I launch Lightroom I get this message.  When I click OK, the program closes.  Basically can't do anything.
    Please help!

    You need to trash the preview cache. It’s in the main catalog folder.
    Delete the folder with the ending Previews.lrdata
    The default location for the Lightroom folder is normally Pictures/My Pictures if you did a standard installation.
    Re-launch Lightroom after deleting the Previews folder.
    N.B. do not touch files ending .lrcat

  • Unexpected Error when submitting Claim Code

    Hi there. I have tried all instructions on HP site to link printer for HP ePrint. However, when submitting Claim Code I get the message 'Unexpected Error'. Can someone help?.Thank you.

    Hi , Thanks for posting in the HP Forums, and welcome!  I'd like to help you with the "unexpected error" message you are getting when attempting to submit the claim code for your HP Laserjet Pro M125nw. Are you getting this error message on the HP Connected website when attempting to add your printer? If so try these steps to resolve the issue. Open the HP Connected website in another browser. (For example: if you are using Internet Explorer, try Google Chrome, or FireFox) Remove and re-enable web services on your device to generate a new claim code: Check your printer's IP address.Enter the IP into the address bar of your browser.Select the HP Web Services tab at the top.Select remove web services on the left hand menu.Once web services are removed, click on setup or enable to turn them back on. A new claim code should print.If you are getting the error message when attempting to enable the web services on the printer, try the following steps to resolve the message. Firstly, do you have the printer connected directly to a wall outlet or is it in a surge protector or power bar? Even if you have been using a surge protector/power bar all this time and you feel it is not the cause, please connect it to a wall outlet just so we can eliminate the power source as the root cause. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector
    In this document you will see, ISSUE: Problems or issues may arise when an HP LaserJet series printer is connected to an uninterruptible power supply (UPS), a power strip, or a surge protectorIf that doesn't immediately resolve the issue, I'd recommend downloading the most recent firmware update for your printer here - HP LaserJet Pro MFP M125/M126 Series Firmware Update(NOTE: Make sure the printer is USB connected before running the firmware update utility, as any interruption during the update can cause serious issues) Please respond to let me know if we have resolved this issue!

  • Flash 8 compiler throwing an JSFL error when action scrit code increased

    Hi All,
    I am facing problm when i publish FLA file in macro media flash 8. It showing an JSFL error.
    Anyonw know why it shows jsfl error and how can i solve this issue.
    Thanks in Advance
    Regards
    Subba Reddy

    Hi all
    by doing some research and development, i found macro media flash 8 throwing an error in Action Script 2.0 when it exceeds code size limt. does anyone how to solve this.
    Thanks in Advance
    Regards
    Subba Reddy

  • I  just bought Quicktime Pro for Windows. I want to enter my registration code and get started....but where do I do that? No option in my Quicktime menu.

    I just bought Quick time Pro for Windows. I want to get started, but can't find where I can enter my registration code!

    Edit menu / Preferences / Registration

  • L7780 All in One - Windows 7 Clean Install - Error when printing

    I have a huge problem with a failry new L7780 all in one. I has stopped printing from my laptop. I recently upgraded to Windows 7 with a clean install from Vista....ergo I formated the disk and then reinstalled Windows 7 . And, now every time I print I get the following message "the job has failed due to an error on the printing system"
    The printer is selected as default.
    The printer does connect through wireless onto my network , and does appear on my PC as connected. However, once I press print after a few seconds it seems to disappear.
    I have not altered any network settings and MAC address is off on my router. It was working fine on 2 Home pc's running XP, worked great with Vista. And its only this one Laptop with Windows 7 that can't print to it for some reason.
    However, sometimes when I have shutdown...all of a sudden it prints out what I asked it to 30 minutes ago.
    I have tried installed and re-installing drivers.
    I have tried forced start ups .
    Switching it off at the mains.
    Resetting the network adpater.
    I can only think at this stage there is a compatibility issue with Windows 7.
    Any clues? Any help anyone can offer.
    Cheers,
    Steve
    This question was solved.
    View Solution.

    If this sounds like your issue:
    After installing the product on a network, you turn the computer off, and then on, and the product loses functionality. The product no longer prints and the product icon disappears from the Devices and Printers menu in Windows 7 (64-bit).
    Try this fix:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-89191-1&lc=en&dlc=en&cc=us&...=
    007OHMSS
    I was a support engineer for HP.
    If the advice resolved the situation, please mark it as a solution. Thank you.

  • Windows Server 2008 Explorer error when i right click on folder

    Hi everybody.
    I have installed a new Windows Server 2008 64-bit, update it to latest.
    I have a problem that happens when i right click on a folder. The error only happens if i right click on a folder that has only 1 character long folder name. Doesn't matter if the name is for example: "1" or "a" or "f", the explorer.exe crashes and gives me
    error:
    This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information.
    image:
    full error info:
    Problem signature:
      Problem Event Name:    APPCRASH
      Application Name:    Explorer.EXE
      Application Version:    6.1.7601.17567
      Application Timestamp:    4d672ee4
      Fault Module Name:    msvcrt.dll
      Fault Module Version:    7.0.7600.16385
      Fault Module Timestamp:    4a5bdfbe
      Exception Code:    40000015
      Exception Offset:    000000000002aa8e
      OS Version:    6.1.7601.2.1.0.274.10
      Locale ID:    1033
      Additional Information 1:    f530
      Additional Information 2:    f5308e7edca7281fd3c8f9f1fa48021a
      Additional Information 3:    4a44
      Additional Information 4:    4a44581c8f470fcc2cbc842e91755c88
    The error happened to me on different pc before so it is not related to hardware. The problem happens also if i create folder on desktop, problem stays if i create a new account, the problem goes away if i rename the folder to at least 2 character long name
    (for example: "1a", "de"), by slowly double click it. If i go to Start --> Computer --> Local Disk (C:) --> create New Folder with 1 character long name and than go to Organize, i can cut, but not do the same to paste the folder inside another location,
    because the error happens.
    I didn't install Visual Studio.
    How to solve the problem ?

    This is not the usual behavior of the windows Server. 
    Please perform the following things 
    1) Perform a clean boot 
    http://technetfaqs.wordpress.com/2009/05/18/how-to-clean-boot-in-windows-2008-server/
    2) Go to the safe mode and try to perform a virus check using the malicious virus removal tool
    https://support.microsoft.com/kb/890830/en-us
    3) If none of the above helps then you should generate the dump file and analyze it to find the root cause of the problem which is not easy for the new users. How ever if you generate it and put it to the sky drive I will try to analyze and let you know
    http://support.microsoft.com/kb/254649/en-us
    http://www.arabitpro.com

Maybe you are looking for

  • HP Photosmart 7450 printer media cards

    The manual for this printer says I can use any standard media card. I have a XD picture card which is supported but what does HP mean by STANDARD. They don't specify what memory capacity is standard for any of the supported media cards. I'm trying to

  • LabView 7.1 and MAX problems after installing and removing LabView 8.2

    Hi all, I came into a research lab and am using computers/programs set up by lab members in the past. We have been running LabView 7.1 on a Fujitsu P8020 laptop (its about 6 yrs old maybe?). Recently, we decided to install LabView 8.2. However, we co

  • Purchase Requistion release date as system date

    Dear Experts, Our Requirement is the top management want to know time taken to release a purchase requisition,means the duration between purchase requisition creation date to release date. here user are manually changing the release date to system da

  • Connecting to OS X file shares from Linux

    I need to connect to file shares on an OS X computer and mount them on a Linux server. Every resource I've seen seems to try to do this the other way around. I can ping the OS X computer so I know it can see it. I have enable SMB under sharing and se

  • Why don't some users have option File SharePoint/Office 365 Server Check In?

    All team members have the same permissions in SharePoint. We can all check a doc out in SharePoint. Some of us then have an option on the File menu in Acrobat that says "SharePoint/Office 365 Server" with a "Check In" option under that. Some team mem