Windows 7 and Snow Leopard Question

Okay, sorry for sounding naive here, but i'm browsing through questions about Windows 7 and bootcamp... and its problems... Why would one install something that isn't even supported yet?
I mean, last I checked, Apple posted this: http://support.apple.com/kb/HT3920 about the compatibility of Boot Camp and Windows 7.
The reason why I ask is that, I'm planning on switching from a Dell (which is running Win7 on it)to a macbook pro. I actually really like Windows 7 but considered the idea of switching to a mac.
So I guess the first question, I'm curious about. The second question is... what other sort of problems have people experienced with installing Windows on a mac using bootcamp?

Resizing partitions isn't supported, though there is an over-priced utility or two, but I feel double what you need now.
Most people don't need Ultimate, Home Premium 64-bit if you have 4GB or more is fine. If you keep the Dell, you'll need another copy.
Updating drivers shouldn't be a big issue.
Having good thermal fan control is essential - and that has almost always been weak or non-existent.
Battery life in Windows is also shorter than on similar PC laptops I think even still.
Mac OS can always be booted off internal AND external hard drive (no limit to one boot volume) and is lighter on disk space. All depends on what you load up on each system.
And whether you plan to run Windows natively as it sounds like, and whether you want to run Windows inside Mac OS (Parallels and Fusion let you use your Boot Camp volume).

Similar Messages

Need OS X Lion and Snow Leopard for iCloud functionality but I have a windows bootcamp on my mac. Problem?

I have a windows bootcamp on my macbook. I need to download OX Lion and Snow Leopard so I can . If I do download both programs, will I loose my bootcamp functionality?
Much apprecitive.

In addition to what Kappy suggested, please check your Mac against the hardware requirements of Lion before starting this project.
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Allan

Cricket UM185C Broadband Modem and Snow Leopard 10.6.x

Cricket has (fraudulently in my opinion) jettisoned support for the UM185C USB Broadband modem and Snow Leopard after very little time. I only paid for the UM185C less than 6 months ago and here I am with wasted money and a service I've paid for that is useless.
Anyway, I saw here where intrepid forum users where able to get the Cricket A600 USB Broadband Modem and Snow Leopard to work together after a series of terminal hacks, etc.
http://discussions.apple.com/thread.jspa?threadID=2142240&start=15&tstart=0
Is there any hope for making the UM185C work or should I simply discontinue service with Cricket and report them to the BBB for fraud and leave well enough alone.
I think the fact that there's no mention of the UM185C in these forums tells me that most Mac users are ditching Cricket for broadband and I can't blame them. What an unethical company they are. By the way, want to have some fun? Try downloading the "mac" version of the driver from the Cricket site for the UM185C; it's an .exe file for Windows.

Hi Cowicide Moo,
My name is Ryan and I work in partnership with Cricket Wireless. We are sorry to hear about any confusion you may have encountered regarding the types of software supported by our various selections of broadband devices. On our website, we provide a clear list of modems and support software for customers to be able to determine the correct device to purchase for their computer.
http://www.mycricket.com/support/faq/What-computers-and-operating-softwareandnbs pare-the-Cricket-Broadband-modems-compatible-with
As you'll see, the UM185C is supported by Mac OS X Leopard (10.5+) and earlier, but does not currently support Mac OS X Snow Leopard (10.6+) 32-bit. Please let us know if you have any other questions.
Best,
Ryan on behalf of Cricket

In limbo between Leopard and Snow Leopard - stupidly didn't back up

I've got an old-school black MacBook, about four years old now. I never cared enough to upgrade it to Snow Leopard, but now I want Lion. So, I borrowed my parents' five-license Snow Leopard install disc and started off on the journey to upgrade to Snow Leopard, download the App Store update, then download and install Lion. I didn't get far.
First, let me say that I didn't back up my hard drive. Like an idiot. Yes, I know it was stupid, so there's no need to say anything. My previous installs (a few clean re-installs) have gone without a hitch, so I figured I'd trust Apple and just run the installation without backing up. Dumb.
The Snow Leopard installation started fine, but was interrupted when the installer said the install failed. Restart, try again. Booting from the install DVD, things seemed to be going fine a second time around -- picked my language, got to the install set-up screen, picked Macintosh HD as my installation drive. And then things stopped working. The installer said my HD could not be written to and that it needed repair. So I went to Disk Utility to try that. Repair Disk wasn't available, so I clicked Verify Disk. That got interrupted when it said the disk needed to be repaired, after which the Repair Disk button was clickable. Tried to repair, but apparently my HD is screwed beyond the capabilities of Disk Utility.
I tried to reboot the MacBook from the HD, which Disk Utility said still had Leopard running on it. The computer wouldn't boot up. Safe Boot didn't work. So, without any other real options, I thought I'd try my luck by just trying the install again. Booted up from the install DVD, and ran into the same issues. Didn't magically fix itself, of course. So my MacBook is stuck in limbo between Leopard and Snow Leopard, won't boot from the HD and won't let me repair the disk when booted from the DVD. What do I do?
I plan to try a couple third-party disk-utility programs tomorrow (8/25/11) to recover the files on my HD. There's not much I care about on there (just some iPhone photos and my resume, really), so doing a clean wipe of the HD and installing Snow Leopard is an option. But I'd of course rather be able to recover my personal files. Is this possible at this point?
Another question I have regarding a clean wipe: If I end up having to clean off the HD and lose all my data, I'll lose the iTunes configuration for my iPhone. Will iTunes be able to import my apps and settings from my phone if I plug it in?
Thank you very much.

For a hard drive try Newegg.com http://www.newegg.com/Store/SubCategory.aspx?SubCategory=380&name=Laptop-Hard-Dr ives&Order=PRICE
Or OWC http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/
Here's instructions on replacing the hard drive http://creativemac.digitalmedianet.com/articles/viewarticle.jsp?id=45088
Here's a cheap SATA external hard drive case on eBay http://cgi.ebay.com/USB-2-5-SATA-HDD-HARD-DRIVE-EXTERNAL-ENCLOSURE-CASE-BOX-/120 636286623?pt=PCC_Drives_Storage_Internal&hash=item1c167ba69f

Running Leopard and Snow Leopard

Hey guys and gals... I recently bought a new macbook pro with snow leopard installed. This is all great, but the program that I use the most (pro tools) only works on leopard (unless of course I want to pay 150 dollars to upgrade my pro tools, which I do not). Is there any way to run leopard and snow leopard just as some people run windows and osx? I would also like to not have to restart my computer every single time I wanted to switch back and forth. ANY help is greatly appreciated!
Justin C

Is there any way to run leopard and snow leopard just as some people run windows and osx?
Basically, not if the computer was released after Mac OS X 10.6.
I would also like to not have to restart my computer every single time I wanted to switch back and forth.
This function requires Mac OS X Server.
(50521)

Nokia N86 and (Snow) Leopard

Does anyone here know if the Nokia N86 smartphone is compatible with the latest cats, Leopard and Snow Leopard?
I currently have an N73 and it interfaces just fine either via USB or Bluetooth and the Nokia Multimedia Transfer app (1.4). iSync, iPhoto, iTunes are able to speedily do their thing with the phone. Bluetooth connectivity started working again after the 10.5.8 update. However, that phone is getting dated and my carrier is currently offering very attractive hardware upgrade plans for the holiday season; since the main use I have for it (besides making calls and sending SMS's) is taking pictures, the N86 fabulous 8 megapixel camera with mechanical shutter and Zeiss lens is really attractive.
Nokia says the Multimedia Transfer app is not compatible, but it said the same thing about the N73, so I'd rather ask the Discussions Collective any experiences with this N86 phone. Yeah or nay?
Oh, and why am I blaspheming about a Nokia instead of following the One True Faith and getting an iPhone? Cause it is too bloody expensive over here with our carriers! Not only is it expensive to get, it is even more so to maintain!! Doubles or triples what I currently pay.

This article should answer your question:
http://support.apple.com/kb/HT2824
If you can't find your phones there, there might be some third party support options on http://www.macupdate.com/ or http://www.versiontracker.com/macosx/

Can I have both Lion and Snow Leopard on One Hard Drive?

My problem is I need to run a PowerPC game on Lion which Lion no longer supports. So i thought i could download Snow Leopard back to my Mac and partiition my hard drive in the process as that is the only way i know of to have both Lion and Snow Leopard. I went through the Boot Camp Asistant process and it seems it will only partition Windows 7 to my Mac when i need Snow Leopard. If anyone has any idea how to help me have both Lion and Snow Leopard at the same time on just one hard drive or figure out how to run the PowerPC programs on my Mac (if there is a way around it). The help will be well appreciated!

How To Run Snow Leopard On A New Mac
This does not apply to new Mac Minis or MacBook Airs. When newer models are introduced that also require Lion for hardware support, the techniques described below will no longer work with the possible exception of using Parallels 7.
What has to be done:
Create a new partition on the hard drive.
Get a clone of a 10.6.8 Snow Leopard system. Put the cloned Snow Leopard system onto the new partition.
Step One: Create a new partition on the hard drive
To resize the drive and create a new partition do the following:
1.    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
       After the main menu appears select Disk Utility and click on the Continue button. Select the hard drive's main entry then click on the Partition tab in the DU main window.
2.   You should see the graphical sizing window showing the existing partitions. A portion may appear as a blue rectangle representing the used space on a partition.
3.    In the lower right corner of the sizing rectangle for each partition is a resizing gadget. Select it with the mouse and move the bottom of the rectangle upwards until you have reduced the existing partition enough to create the desired new volume's size. The space below the resized partition will appear gray. Click on the Apply button and wait until the process has completed. (Note: You can only make a partition smaller in order to create new free space.)
4.   Click on the [+] button below the sizing window to add a new partition in the gray space you freed up. Give the new volume a name, if you wish, then click on the Apply button. Wait until the process has completed.
You should now have a new volume on the drive.
It would be wise to have a backup of your current system as resizing is not necessarily free of risk for data loss. Your drive must have sufficient contiguous free space for this process to work.
Step Two: Obtain a clone of a Snow Leopard system:
You will need access to a Mac already running Snow Leopard. You will need a 16 GB USB flash drive or an external hard drive to which you can clone the Snow Leopard system from the Mac that has Snow Leopard installed. Alternatives are:
Option One:
Install a new Snow Leopard system onto a USB flash drive. Boot the Mac used for installing with the USB flash drive. Update the flash drive system to 10.6.8 using the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard. Verify that you can boot the Mac with the USB flash drive.
Take the USB flash drive to your new Mac and try booting from it. If it works then clone the system from the flash drive to the newly made partition:
          Clone using Restore Option of Disk Utility
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
          Destination means the new partition on the internal drive. Source means the USB flash drive.
Option Two:
If you have a large enough external drive you can erase and use, then it would be easier to just clone the entire Snow Leopard system from the source Mac computer to the external drive.
          Clone using Restore Option of Disk Utility
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
          Destination means the external drive. Source means the Snow Leopard Mac's internal drive.
After cloning verify that it will boot the source Mac. If so then take the external drive to your new Mac boot with it. If all is well then restore the clone to the new partition on your new Mac:
          Restore the clone using Disk Utility
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
          Destination means the new partition on the internal drive. Source means the external drive.
If the above seems too daunting then you might consider running Snow Leopard inside an emulator such as Parallels 7. You are permitted to install a single copy of Snow Leopard inside a virtual machine. You will need to first purchase a copy of Parallels 7 and install it on your new Mac. Create a new virtual machine configured for Mac OS X. You may then install Snow Leopard in the virtual machine then download Mac OS X 10.6.8 Update Combo v1.1 and update to 10.6.8. Be sure to include Rosetta in your initial Snow Leopard installation. Rosetta is not installed by default rather it's an optional install.

AVCHD and Snow Leopard (I-Movie / Final Cut Express)

AVCHD and Snow Leopard. I have been using Final Cut Express 4 and I-Movie 08 since they both came out. I have been using the same AVCHD camcorder (Cannon HG10) with both programs, and it has worked perfectly. Now I have installed 10.6 and 10.6.1 and now neither program will allow AVCHD transfer. Both recognize the camcorder but won't transfer.
A little poking around on the internet and I discovered that Snow Leopard won't support AVCHD (http://www.shedworx.com/no-avchd-in-snow-leopard). Third party web site mind you.
So far I agree it won’t work with AVCHD. Now since both programs were developed to use one of the most widely utilized formats in HD camcorders, again AVCHD, this accidental or intentional over site smells of Microsoft, not Apple.
I like some of the features of Snow Leopard but for me the video aspect is one of the top requirements. Apple had been the leader in the multimedia revolution and this mis-step with AVCHD is it’s typical of Apple.
I have just restored back to 10.5 and every thing is working again.
Now that were around the block here is the question. If anyone can come up with a solution…that does not include the used of third party software to convert, please let me know.
And to Apple, please fix this problem, I’m already hearing the complaints with QuickTime X, and seen the headlines, “Snow Leopard, is it Apples Vista?”.

CAM2399 wrote:
A little poking around on the internet and I discovered that Snow Leopard won't support AVCHD (http://www.shedworx.com/no-avchd-in-snow-leopard). Third party web site mind you.
This is, to be polite, a misunderstanding. Shedworx are being careless with their terminology.
1. SL itself does not support AVCHD, but neither did Leopard.
2. AVCHD support is built in to the movie editing software (iMOvie, FCE, FCP), exactly as it was in 10.5
3. I am happily editing AVCHD from my HG10 in iMovie 09 and in FCP, in exactly the same way I did under 10.5
So you have a specific issue with your camera, you've taken that with some carelessness from Shedworx, and on that basis you've decided, incorrectly, that Apple does not/will not support AVCHD.
There were many cases under Leo where people reported problems getting their camera to communicate with iMovie. Solutions include:
1. Trashing iMovie preference files
2. Repairing permissions
3. Copying the AVCHD folder tree from the camera to disk, and importing to iMovie from there
4. Using MPEG Streamclip to convert the camera footage before importing to iMovie
5.Making sure the camera is running on mains power, not battery, and that it's in playback mode.

I have a desktop Mac OS X Leopard. I want to upgrade to Quicken 2007, Install Snow Leopard and download iLife '11. I heard that Quicken and Snow Leopard can clash and have problems. What would be the best order for installing these products. Thank You.

I have a desktop MAC OSX Leopard. I want to upgrade to Quicken 2007, install Snow Leopard, download iLife'11. I heard that Quicken and Snow Leopard can clash..........that is why I am upgrading Quicken. What would be the best order of installing these products. I have gotten defferent opinions and I want to be sure I install them correctly.
Thank You.

First, install OS X, then install your third-party software.
How to Install OS X Updates Successfully
A. Repair the Hard Drive and Permissions:
Boot from your current OS X Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
B. Make a Bootable Backup Using Restore Option of Disk Utility:
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the
      Destination entry field.
6. Select the source volume from the left side list and drag it to the
      Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal
startup drive.
C. Important: Please read before installing:
1. If you have a FireWire hard drive connected, disconnect it before installing the
      update unless you will boot from this drive and install the update on it.
      Reconnect it and turn it back on after installation is complete and you've
      restarted.
2. You may experience unexpected results if you have installed third-party system
       software modifications, or if you have modified the operating system through
       other means. (This does not apply to normal application software installation.)
3. The installation process should not be interrupted. If a power outage or other
      interruption occurs during installation, use the standalone installer (see below)
      from Apple Downloads to update. While the installation is in progress do not use
      the computer.
D. To upgrade:
Purchase the Snow Leopard Retail DVD.
Boot From The OS X Installer Disc:
      1. Insert OS X Installer Disc into the optical drive.
      2. Restart the computer.
      3. Immediately after the chime press and hold down the "C" key.
      4. Release the key when the spinning gear below the dark gray Apple
          logo appears.
      5. Wait for installer to finish loading.
      6. Follow instructions.
After installing Snow Leopard you should update it by downloading and installing Mac OS X 10.6.8 Update Combo v1.1.

Install Leopard and Snow Leopard from an external drive?

Hey guys,
I have a 120GB ext drive and was curious as to if its possible to install Leopard and Snow Leopard from it if I have the DMG's. I guess my main question is how would I setup formatting in Disk Utility?
Thanks!

Set up two 10GB partitions and a third partition for the rest of the drive on the external drive, use Disk Utility to "Restore" the mounted installer DVD to a 10GB partition on the drive.
Plug the drive into a Mac and hold the option key down during boot. Select the installer you wish to use.

I tried copying a photo and pasting it in another event/group within iPhoto but the paste feature doesn't work. This wasn't an issue with both Leopard and Snow Leopard. Do you have any solutions or tips?

I bought a new MacBook Pro with OsX Lion as operating system. I use iPhoto a lot and when I tried copying a photo then pasting it to another event/group, the 'paste' feature doesn't work. This wasn't the case with Leopard and Snow Leopard where the 'paste' feature worked. What I did was to paste the photo first to the desktop before transferring it to the new event/group. I brought my Mac to the Apple store where I bought it and the technicians were themselves surprised that the 'paste' feature didn't work. Chalked it up to glitches in the Lion os. So how do we fix this? I just find it absurd that a feature that used to work in Snow Leopard has been disabled in Lion, and the user still has to undergo an additional step to make it work, when new technology is supposed to make things easier for users.
Also, hasn't anyone noticed that it takes longer for the computer to boot upon opening?

Instead of copy and paste drag the photo to the new event. Or flag it and use the add flagged photos to selected event command
LN

CAn I run Lion and snow leopard on the same computer with different sign-ins?

CAn I run Lion and snow leopard on the same computer with different sign-ins?

Alternatively, partition your internal HD and dual-boot it. Do note that you have to reboot to switch back and forth. You can't do it by logging out and back in.

New iPod Touch won't sync with computer - have latest version of iTunes and Snow Leopard. Computer won't even acknowledge the iPod.

New iPod Touch won't sync with computer - have latest version of iTunes and Snow Leopard (10.6.8). Computer won't even acknowledge the iPod. Have restarted both, changed ports, etc. What's do I need to do?

Have you tried here:
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
Do not forget the Additional Information topic.

IPod touch second generation. Trying to sync to mac. Have updated itunes and snow leopard. When I plug it in, it is recognized in iphoto, not itunes. ipod is freezing. Have tried several times to set back to factory settings, but computer wont see it

iPod touch second generation. Trying to sync to mac. Have updated itunes and snow leopard. When I plug it in, it is recognized in iphoto, not itunes. ipod is freezing. Have tried several times to set back to factory settings, but computer wont see it

Try here:
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

Is it possible to install Lion on the second hard disk on my Mini (2010) Snow Leopard Server, and switch between Lion and Snow Leopard? I like those voices Lion has in speech.

Is it possible to install Lion on the second hard disk on my Mini (2010) Snow Leopard Server, and switch between Lion and Snow Leopard? I like those voices Lion has in speech.

When baltwosaid NO emphatically, that was described as CORRECT ANSWER. Ditto in the caeses of the radically different answers from Camelotand Matt Clifton
Could it be that CORRECT ANSWER needs better defining by Apple?
That apart, yes, switching might involve rebooting. About the voices, well, I was the other day adding voice to a commentary in a video I was working on. There's only American English accent in SL — Lion I believe has British ones as well.
Why not, I wondered, try to install Lion purely for academic interest, maybe with an SD card (Sandisk Ultra II, 16GB) as Tom Nelson says is possible at http://macs.about.com/od/macoperatingsystems/ss/Perform-A-Clean-Install-Of-Os-X- Lion-On-Your-Mac.htm

Windows 7 and Snow Leopard Question

Similar Messages

Maybe you are looking for