Windows 7 and Virtual App locations?

We have quite a few virtual apps here, and the process I've been using is to
-create a folder c:\Program Files\Vx
-Copy the <virtualapp>.exe to this folder
-execute the <virtualapp>.exe
This is so laptops can use the apps when away from our network.
We are finding that on Windows 7 (64 bit) some apps are not starting from this folder properly, while others are. I'm reading all sorts of things about the C:\Program Files folder on Win7, not pretty.
My question is, where to you store your ZAV executables locally? Or is there a way to let ZCM push them down, cache them, so they can be run when offline?
Appreciate any thoughts.

Originally Posted by mickers
We have quite a few virtual apps here, and the process I've been using is to
-create a folder c:\Program Files\Vx
-Copy the <virtualapp>.exe to this folder
-execute the <virtualapp>.exe
This is so laptops can use the apps when away from our network.
We are finding that on Windows 7 (64 bit) some apps are not starting from this folder properly, while others are. I'm reading all sorts of things about the C:\Program Files folder on Win7, not pretty.
My question is, where to you store your ZAV executables locally? Or is there a way to let ZCM push them down, cache them, so they can be run when offline?
Appreciate any thoughts.
In my experience most customers place virtual apps in a folder on the root of c:, such as c:\vapps and often make this a hidden folder. In terms of execution is makes no difference but you may run into issues with x64 Win7 when using PROGRAMFILES.

Similar Messages

  • Where are the calculator, voice recorder, compass and contacts apps located by default?

    What is the default location of the calculator, voice recorder, compass, stocks and contacts apps now that the clock is on the home screen?

    In the Utilities folder (2nd screen)?

  • Removing Windows Components and controlling start location

    I'm wanting to do a interactive application that is fullscreen across two monitors. I know that invoking the normal fullscreen procedure will defult the the fullscreen to only the main monitor. I was wondering if there was a way around this. Like, if I removed the windows borders and flash toolbar from the application, set the initial window location to start at (0,0) and then set the stage size to the resolution of the two monitors horizontal resollution compined. Is that possible, and if so what the things(terms,methods) I new to start looking at.
    Thanks,
    Joe

    You cannot do that with browser or projector (unless you use a third party projector) but you can with AIR. There was a discussion about this so if you search the archive you should be able to find it
    Kenneth Kawamoto
    http://www.materiaprima.co.uk/

  • Xcompmgr messing with openbox windows (conky and kde apps only)

    here's the involved packages:
    openbox 3.4.7.2-1
    nvidia 177.82-1
    xorg-server 1.5.3-3
    xcompmgr 1.1.4-1
    kdelibs3 3.5.10-2
    conky 1.6.1-2
    now the issue is primarily with xcompmgr.  when it's running (default options or the whole -cCfF... stuff doesn't make a difference).  i have the following:
    whenever a kde apps window opens.  (i.e. i start amarok or k3b; k3b opens new windows during burn start/stop process) my conky will disappear only to flicker and reappear a few seconds later. (this only happens with kde apps)
    when i'm tweaking my conky i will often `pkill conky; sleep 3; conky` to see my changes.  when i kill conky, ALL of my active windows on the current desktop disappear and only reappear if a) they are redrawn because of an update to their contents on their own accord, or b) (kinda the same thing) i grab a window and drag it all over the screen resetting whatever i pass over to it's correct visual state.  (this only happens when killing conky)
    this is annoying me, i love the shadows/fading from xcompmgr but this flickering makes my whole experience feel unstable and i have to turn it off after a few minutes.  turn off xcompmgr and it's rock solid just as before... snappier too i think.
    this behavior started immediately after the recent xorg update (i saved that for last because i know were all sick of _that_).  i changed nothing, but for the -Syu when this happened.
    anyways, your thoughts and help is much appreciated.

    so i'm resurrecting this thread because i hoped, and  prayed, that xorg 1.6 in testing would fix this problem.  i've been working my ass off to keep my system back in xorg 1.4.  my desktop just looks so oldfashioned w/o shadows and transparency. 
    ok so to re-outline, i'm running:
    pacman -Q stuff
    xorg-server 1.6.0-1
    nvidia 180.29-3
    openbox 3.4.7.2-1
    xcompmgr 1.1.4-1
    with this gpu:
    hwd -s | grep video
    Video : GeForce 7150 / nForce 630i server: XFree86 (vesa)
    i created a minimal xorg.conf via nvidia-xconfig an added a few suggested options (although they _really_ don't seem to affect this bug...):
    cat /etc/X11/xorg.conf
    # nvidia-xconfig: X configuration file generated by nvidia-xconfig
    # nvidia-xconfig: version 1.0 (buildmeister@builder62) Thu Feb 5 00:08:50 PST 2009
    Section "ServerLayout"
    Identifier "Layout0"
    Screen 0 "Screen0" 0 0
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Unknown"
    ModelName "Unknown"
    HorizSync 28.0 - 33.0
    VertRefresh 43.0 - 72.0
    Option "DPMS"
    EndSection
    Section "Device"
    Identifier "Device0"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    Option "NoLogo" "True"
    Option "RenderAccel" "True"
    Option "TripleBuffer" "True"
    Option "BackingStore" "False"
    Option "DamageEvents" "True"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Device0"
    Monitor "Monitor0"
    DefaultDepth 24
    SubSection "Display"
    Depth 24
    EndSubSection
    EndSection
    now, here's what happens:
    i startx, .xinitrc or autostart.sh bring up xcompmgr, bmpanel, and conky
    if i open amarok or k3b, conky and bmpanel (both using transparency) vanish while the splash screen(s) show.
    when i burn something with k3b (and new windows appear) i see similar behavior
    sometimes it's just for a sec and then it's back, sometimes conky comes back with part of itself missing
    also, if you execute `pkill conky` from an xterm, all windows are 'destroyed' until you [blindly] grab that xterm window and move it about your desktop 'revealing' the desktops contents.  please see this screenshot for this in action.
    killing xcompmgr fixes all this... but it's so ugly.  the problems go away if i downgrade to xorg-server 1.4 (and also adjust any related/dependant packages to match).
    please please, tell me i'm not alone!  a fix would be nice too .
    thanks in advance... again
    Last edited by brisbin33 (2009-03-05 01:30:10)

  • Cannot get rid of critical notification to "Get a developer license" for Windows store and phone apps

    I have no intention of developing such apps so I'm not going to get a license for them. How do I get rid of this notification?

    Hi CarlinScott,
    This KB update explained such issue in VS2013 Update 4 and provided a fix for such issue, reference:
    https://support.microsoft.com/kb/3018885?wa=wsignin1.0
    You can try to
    Download for Update to Microsoft Visual Studio 2013 Update 4 (http://www.microsoft.com/en-us/download/details.aspx?id=44998)    
    Hoping it can help you.
    Thanks,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Windows 8.1 Photos app doesn't display photos from Home Server V1 network drive

    I have my photos stored on a Home Server V1 network drive (\\homeserver\photos) and I have added the drive to the Pictures library. When I open the library in desktop Explorer I can see all the photos
    and my Photos live tile shows photos from the network drive. When I open the Photos app I can see all the folders. However, when I open a folder I get the message 'There are no files or folders in this view.'
    Any help is appreciated.
    I am running Windows 8.1 with the latest updates.

    Adding another voice to this - I hit exactly the same issue myself yesterday.  I haven't got the device with me now, but as the original poster says:
    I have \\server\photos mapped to my p:\ drive in Windows 8.1, and this is in my pictures library.  
    The p:\ drive has many (100s) subfolders, which I can browse using Windows explorer and desktop apps like Picasa.
    When I start the "photos" app, I see all my folders (each with a thumbnail picture), but when I click into a folder I just get the "There are no files or folders in this view".
    It's probably worth saying that as this is Home Server v1, I had a bit of fun and games to get permissions right to access the share:
    I log into Windows 8.1 (on a Surface Pro 3) using my Microsoft account
    I've mapped the home server photo drive to "P:\" on my SP3; when I did this I provided the admin user ID and password for the home server and told windows to remember the credentials.
    I added p:\ to my pictures library in Windows 8.1 on the SP3.
    FWIW - I use a similar mechanism to add music from my home server to my music library, but the XBox Music app seems to be able to see individual tracks OK.
    Any ideas?

  • Installing 11i apps on windows xp and Red Hat linux AS 3.0

    Hi,
    I am a newbie to Oracle E-business suite............i will be very helpful if anybody could help me with the full procedure on how to install Oracle apps on windows on Windows XP and Red Hat linux AS 3.0.........starting with configuring ip.....i would really appreciate if somebody helps me out...........well thanks in advance..waiting for a optmistic reply...
    Thanks again,
    Virendra

    I have done installation on XP and 2000 servers are heres the steps... detailed ones. I also request those who install Oracle Apps 11i to first read the installtion pdf's which helps you understand clearly the prerequisites overall.
    You cannot find the Pre installtion steps(such as Mks Toolkit and GNUMake config) in more clear terms from those documents.Which are explained here.
    The Must PDF's to refer before installation
    1)r1152ins.pdf
    2)11iconcepts.pdf
    According to the 11iconcepts PDF you can decide your business needs the N-Tier Architecture and Database Server and Application Tier Server File System in a very clear terms.
    The installation process can be divided into
    Pre Installtion,Installation and Post-Installation stages.
    I would caution everyone to concentrate more on Pre Installation stage and which is more critical for a successfull installtion of Oracle Apps and to be free with later cropping up problems.
    Further before moving into Installtion stages i have to Explain the Number of CD's and Installtion type's in Oracle App's.
    In many places you may need to wait patiently even more than 10 minutes for screens(Dialog Boxes) to appear dont conclude prematurely some problem on system.
    In oracle Apps 11.5.1 it consist of 12 CD's.
    1) Start Here CD(RAPID Installation Wizard)
    2)1-11 CD's
    1-3 Application Top information
    4th Oracle DB
    5-6 IAS and other tools
    7-11 Oracle Apps DB.
    You have to decide whether you are going to do a Single Node Installation(No Post-Installation Task) or Multi Node Installation. Refer(r1152ins.pdf)
    While installing for Multi Node you can see the Installation locations to be mentioned as
    Appl_Top,Common_Top,Data_Top etc.Try to install Appl_top and common_Top in one drive and Data_Top in another Drive(Single Node) and in different nodes in Multi Node installation.
    Installation Types
    Production ==>Real time Env implementation's
    Test ==>For test Env Purposes
    Vision Demo==>R&D or learning Purposes.
    Pre-Installation steps
    ======================
    Space Requirement for types of installtions
    Install VC++
    How to Download and install MKS tool Kit
    How to Download and Configure GNUMAKE
    Env path setting
    Create Applmgr user in Win2000
    Space Requirement for types installtion:
    Memory Requirement
    1 GB of RAM(512 Fine for initial Installtion)
    but planned for more user connections another 1 GB of Ram and according to the number of user's and Application needs you have to Increase the Memory.
    HDD capacity
    APP_Top(A)
    COMMON_TOP(C)
    DATA_TOP(D)
    Test DB : 22 + 20 GB (60 GB recommended)
    Prod DB : 22 + 20 GB (60 GB recommended)
    Vision Demo DB: 22 + 35 GB (80 GB recommended).
    Plus space for ur staging area.
    This are the actuall space required for the Oracle Apps Alone plan for more space for future needs etc.
    Softwares on System
    Win2000 server with Patch1,Winzip and Acrobat Reader Latest version etc.
    Install VC++:
    Install a clean installtion of VC++ of Visual Studio Family 6.0
    It should be first installed before installing MKS or GNUMAKE
    NOTE: When Visual C++ is installed, let the installer register all environment variables. This will allow executables to be linked from the command line.
    How to Download and install MKS tool Kit:
    Note:Try to purchase the MKS tool kit from the below site.
    or try to download the trial version valid for a months time.
    http://www.mkssoftware.com/products/tk/ds_tkio.asp
    Evaluation copy from
    http://www.mkssoftware.com/eval/
    Choose "MKS Toolkit for Interoperability " Download it in C:\
    Again you have to click the downloaded kit to start the actual download of 38 MB of MKS tollkit Evaluation version.
    You will be sent a Demo serial number to your mail id==>copy the same to a Notepad on your desktop.
    Now start the installtion of the MKSToolkit on your system by clicking on the MKStoolkit downloaded.
    It will prompt you for the Demo serial number which has to be provided.
    The MKStoolkit will be successfully installed.
    How to Download and Configure GNUMAKE:
    1) HOW TO GET AND INSTALL GNUMAKE ON WINDOWS2000
    This can be done by performing the following steps:
    NOTE: Please, be aware that you must install Visual C++ BEFORE installing GNUMAKE, because its installation process involves linking executables.
    1) Before downloading GNUMAKE, you will need to acquire some utilities which will be used for unpacking files. You can obtain the required utilities at the following
    URL: ftp://ftp.gnu.org/gnu/windows/emacs/utilities/i386/
    The directory contains the following files:
    README
    djtarnt.exe
    gunzip-1.2.4-i386.exe
    gzip-1.2.4-i386.exe
    tar-1.11.2-i386.exe
    tar-1.11.2a.exe
    Only two of the files are required:
    gunzip-1.2.4-i386.exe and tar-1.11.2a.exe
    2) After downloading the above files, rename them as follows:
    gunzip-1.2.4-i386.exe => gunzip.exe
    tar-1.11.2a.exe => tar.exe
    Place them into a directory that you can set in you PATH environment variable.
    3) Point your browser to the following
    URL: ftp://ftp.gnu.org/gnu/make
    The files needed from this directory are:
    make-3.77.tar.gz
    make-3.78.1.tar.gz
    make-3.79.1.tar.gz
    make-3.79.tar.gz
    Development requires to install version 3.77 or above. Downloading the latest version is perhaps best decision, but there are advantages to downloading the version required by development (3.77). (This document assumes that version 3.77 has been downloaded) (NOTE: AVOID USING SPACES IN
    DIRECTORY AND FILE NAMES. GNUMAKE,VISUAL C++, ETC. DO NOT ALWAYS DEAL WELL WITH SPACES)
    4) For instance, suppose you have downloaded file make-3.77.tar.gz on a directory called C:\GNUMAKE, unpack this file using gunzip.exe from a Command Prompt Window
    Example: C:\GNUMAKE>gunzip make-3.77.tar.gz This last action, will expand file make-3.77.tar.gz and the extension .gz will be removed.
    5) On the same Command Prompt Window, you should UnTAR the file, with the following
    command: C:\GNUMAKE>tar -xvf make-3.77.tar This will create a new subdirectory called MAKE-3.77 under C:\GNUMAKE, the original directory.
    6) In the new subdirectory, there is a batch file
    called build_w32.bat; run the batch file to generate GNUMAKE.EXE
    Try this from Command Prompt more than once if succesfully not built message appers till you get Generated successfully.
    Note:If Possible run all the bat files in the MAKE-3.77 and also config.bat in the sub directory by double clicking it.
    WARNING: There is a known issue with this last step, "GNU make fails to build regardless of chosing build_w32 or nmake"
    See [NOTE:115937.1]
    for work around. RELATED DOCUMENTS ----------------- For Microsoft Visual C++, MKS Toolkit and
    GNUMAKE support, you should contact their respective vendors Microsoft Visual C++, MKS Toolkit
    and GNUMAKE are registered trademarks.
    http://support.microsoft.com/ http://msdn.microsoft.com/ http://www.mks.com/
    http://www.gnu.org/ Note:104010.1: Release 11i on NT: Software Requirements
    Note:115937.1: GNU Make won't make on windows NT
    Important:All the downloaded files from GNU makes web sites shall be put in a single folder called gnumake under c:\ .Try to search for config.bat file inside this folders just click and
    run it.
    Env path setting:
    Try to search make.exe generated in c:\program files\mkstoolkit\mksnt and copy and paste it
    c:\gnumake\MAKE-3.77\windebug and c:\gnumake\MAKE-3.77\winRel also paste both this paths in the
    My Computers==>Properties==>Advanced==>Environment variables==>Path setting's
    After all this check as follows from CMD mode.
    1)execute make at c:\>
    2)execute gnumake at c:\>
    In win2000 it may return error messages or Target wrong ignore it.If it is on Win NT then it will return proper status.
    Create Applmgr user in Win2000:
    Create a Applmgr user account in win2000 .
    Installation:
    =============
    What here you require is the Patience .
    Load the START HERE CD and run the C:\> cd \cdrom\rapidwiz
    For Test and Prod it will ask for the location of Appl_Top,Common_Top and Data_Top location. Mention there path and ensure if more than one installtion say eg.Vision and Test or Prod to check the Path in all the tab pages its corresponding values and path's.
    In Vision Demo many of the Options are not propmted from the user.
    It will then do the system checking for Host Name and other details.All the checking should have been passed or if failed it will mark it in RED cross mark.Rectify the mistake and then onceagain proceed or else you will have problem after installation.
    The Installation time takes around 5 to 6 Hrs of time.
    For info on Post installation or on Multi Node follow the pdf's i have mentioned above.
    The most tedious of all is succesfully crossing the Apps system checking it does for all
    installed products it requires without any failure.
    The GNUMAKE configuration or steps were nowhere given and it was all our trail and error exp.
    This is possibly the most elaborate steps to install Apps on Win. post for further help. email me at [email protected] or [email protected]
    Rajeev.

  • How Do I Change the Language of Start Menu and Modern Apps After I Installed Windows? Applying Language Pack only Localizes Traditional Applications?

    Howdy,
    I installed Windows 10 Technical Preview with original language settings for the US region.
    No that I need my Windows localized to Espanol - Spanish.
    I type "language' in Cortana, select Add language to this device and click Add a language on the Region & language.
    Then I select added language and click Set as primary.
    After the restart I see that while Windows Explorer is displayed in Spanish, Start menu is displayed in English (including app sections such as Explore Windows), as well as Modern apps that have retained their English names (such as Mail).
    I even set the location to Spain in regional settings (although I didn't like the idea, as I want to browse the US market). To no avail.
    How do I change the language of the Start menu and modern apps?
    Thank you.
    Well this is the world we live in And these are the hands we're given...

    Okay, I ran the in-place upgrade and it worked!
    What I did:
    1. Downloaded and attached Espanol edition of Windows Setup ISO.
    2. Started setup.exe from that ISO.
    TIP: If need be, you can downgrade your installation of Windows 10 Enterprise Technical Preview to Windows 10 Pro Technical Preview by changing two registry values, EditionID and ProductName. You may use the following registry file on Windows 10 Enterprise
    Technical Preview:
    Windows Registry Editor Version 5.00
    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion]
    "EditionID"="Professional"
    "ProductName"="Windows 10 Pro Technical Preview"
    Import these settings into registry and start setup wizard from the Windows 10 Pro Technical Preview setup CD. Voila! Windows will offer upgrade of your current setup of Windows 10 Enterprise Technical Preview to Windows 10 Pro Technical Preview with
    saving all your settings and applications!
    The only thing that wasn't localized are the new app sections. I still see Explore Windows and Everyday apps. Probably, these UI strings haven't yet been translated.
    Well this is the world we live in And these are the hands we're given...

  • Trying to uninstall CS5.5 Master Collection, but programs don't appear in standard Windows Programs and Features location

    I'm uninstalling CS5.5 after deactivation in order to gain space for CC, but am having problems doing so.  I'm on 64-bit Windows 7 and installed from the Master Collection disks on both my desktop and laptop - neither one has any of the Master Collection programs showing up in the standard uninstall location, which is the only recommended Adobe uninstall method.
    If I run the original install disk, it recognises the existing CS5.5 programs, but only gives the option of installing further program options rather than uninstalling existing ones - is there any way to use the disks to uninstall programs?

    Fixed it - used the disk to reinstall one of the existing CS5.5 apps, and then the Adobe Master Collection showed up as an item in the Programs and Features location, which I could select and uninstall all apps.

  • Sqldeveloper - Windows 7 64 Bit - unable to launch the Java Virtual Machine located at ...

    Hi,
    I have:
    jdk 1.6.0_30
    SQL developer 2.1.1
    both for windows x 64
    My system is windows 7 enterprise and in control panel the path for java JRE is C:\Program Files\Java\jre6\bin\javaw.exe
    In sqldeveloper.conf the SetJavaHome is C:\Program Files\Java\jdk1.6.0_30
    The sql developer doesn’t work, the error is: unable to launc the Java Virtual Machine located at path
    C:\Program Files\Java\jdk1.6.0_30\jre\bin\server\jvm.dll
    Can Someone help me?
    Thanks in advance
    Diego

    You could try upgrading to SQL Developer 3 which is more up to date.
    Try running <sqldev>\sqldeveloper\bin\sqldeveloper.exe from a cmd window and see
    if there is any more information.
    If you type java -version in the same command window what do you get?

  • I have iTunes open in Windows XP and get an error 45048 message when I try to update apps thru the store. How can I fix this? I have reinstalled iTunes twice.

    I have iTunes, latest version, open in Windows XP and get an error 45048 message when I try to update apps thru the store. How can I fix this? I have reinstalled iTunes twice but problem continues.

    Try contacting iTunes via email to check if there is an issue with the account. go to apple.com/support/itunes
    Click on iTunes Store account and billing and select inquiries. On the right side click on "email us".
    Before doing that trying viewing your account information first. Open the iTunes on you mac, look at the menu and select store and select view my account. Try removing the card (this is only applicable if you don't have a pending charges with iTunes) and hit done. Sign out, quit iTunes and sign back in and try updating the apps again.

  • I went on iTunes today and the app store on my iPhone 5 and both were in the UK location. How do I change my locatin back to america so I can see all the american trends and not the UK/London ones?

    I went on iTunes and the App store today and both of them have somehow changed to be in UK form. The money symbol is different and it shows me whats trending there and not in america, where I live. How can I change the location back to it's original form so I can see whats trending in america and everything else. Please help.

    Try going to the bottom of the Featured tab in the App Store app on your phone and tap on your account id, tap on 'View Apple ID' on the popup and log into your account, and then select the Country/Region section and select the US.

  • How can I see my jabber buddy list as a default and not a new message window on my message app??

    I recently got my OS reinstalled and since then I had a multitude of issues.
    1) my texts kept showing up on my macbook pro so I took my cell number off the preferences on messages on macbook.  Can I still have people facetime me using my cell phone number?
    2) I do see my jabber buddy list when I click on the message center as a default.  I keep getting the new message window, can i set a default that when i click on it I see who is online vs. having to go to windows and select buddy list all the time??
    3) what is bonjour and why would i want to use it?

    Hi,
    Re 1)
    The settings for Messages > iMessages are separate from the FaceTime ones on both Mac and iOS devices.
    Re 2)
    If you have a Jabber (Google or Facebook Chats included) ID in Messages > Preferences > Accounts you can go to the Window Menu and display them.
    By default they are a combined list (Any AIM, Jabber, Yahoo or Bonjour account that is logged in)
    In the Preference > General section you can untick the item that gathers them into one list to show them separately.
    They also appear in the Window Menu separately with their open CMD + # keystrokes.
    Once you have them On show quit the app that way.
    It will "Remember" that they were on Show the next time you open the app.
    Re 3)
    Bonjour is a process on the Mac that "sees" all other Macs on your LAN and shows them in the Side bar of the Finder window as "automatic" Shares.
    In iChat and Messages it is an included account that cannot be deleted
    If Enabled it can have it's own Buddy List (see 2) )
    It shows the Names of the peopel singed in on the other Macs on your LAN that are also using iChat or Messages with the Bonjour Account Enabled.
    The name is taken from the My Card in the Address Book or Contacts app.
    The My Card should have the Mac User's details (you on Your computer when Logged in) and a head and Shoulders icon.
    I have three computers
    One is running iChat 4.x.x and on that machine (running Leopard) the My Card calls me Ralph G4 as it is running on G4 tower.
    My Laptop has me as Ralph MacBook Pro
    This iMac I am posting from has the My Card of Ralph Johns
    On this computer if I have iChat running on the other I see Ralph G4 and Ralph MacBook Pro as "Buddies"
    It can do everything that the AIM and Jabber logins can do.
    Text Chat, Audio Only Chat, Video Chat, Screen Sharing, File Transfers etc.
    10:21 pm      Saturday; February 15, 2014
      iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • Windows 10 Mail and Calendar app will not sync with Office365 account

    I'm playing around with a Windows 10 PC build 10130. I want to try out the mail and calendar app to see if it's good enough for daily use, in lieu of Office.I keep getting the "Make My PC more secure popup box" and clicking enforce these policies does nothing.Opening mail and calendar, I get the "This device doesn't meet the security requirements set by your email administrator" error.I am logged inusing a domain account (but with local admin rights)The machine is using Bitlocker.I used just password, now using PIN too to log-on.Based on another post in Office365 forums I removed the setup account from the machineOur mobile device mailbox policy is pretty standard-Allow mobile devices that don't fully support policies to synchronize.OWA for Devices blocks devices that don't support device encryptionPassword: Required, 4 characters,...
    This topic first appeared in the Spiceworks Community

    I'm playing around with a Windows 10 PC build 10130. I want to try out the mail and calendar app to see if it's good enough for daily use, in lieu of Office.I keep getting the "Make My PC more secure popup box" and clicking enforce these policies does nothing.Opening mail and calendar, I get the "This device doesn't meet the security requirements set by your email administrator" error.I am logged inusing a domain account (but with local admin rights)The machine is using Bitlocker.I used just password, now using PIN too to log-on.Based on another post in Office365 forums I removed the setup account from the machineOur mobile device mailbox policy is pretty standard-Allow mobile devices that don't fully support policies to synchronize.OWA for Devices blocks devices that don't support device encryptionPassword: Required, 4 characters,...
    This topic first appeared in the Spiceworks Community

  • I have Windows 7 and just recently experienced a problem with itunes freezing up when I clicked on the "apps" tab.  Everything else seems to work okay in itunes.  I have uninstalled it and reloaded it 4 or 5 times, but still freezes up.

    I have Windows 7 and just recently experienced a problem with itunes freezing up when I clicked on the "apps" tab which shows the apps that are loaded on my phone.  Everything else in the itunes software seems to be working okay.  The problem is in the part where you sync the newly purchased apps.  The apps will all be blank that are downloaded and that part of the software crashes itunes or freezes up.  I can get out of itunes okay after the freeze up, but it just stops me from syncing anything that I have newly added.  If anyone has had this problem before or knows someone that has, please let me know how I can fix it.  I have uninstalled and reloaded itunes 4 or 5 times, but the problem is still there.  I might add that I have been using itunes and purchasing apps for 2 to 3 years without any problems.  HELP.

    You would get better response from the iTunes community forum.
    Have a nice day!

Maybe you are looking for