Windows 7 login problem to TimeCapsule

Hi there
I am hoping someone can help me as I've tried everything on this forum and nothing has worked.
I bought a Time Capsule and as with everyone else, there are no problems when using it with Mac OSX. However, when using it with Windows 7, I am having problems connecting to it. Once I am connected, it works perfectly and I don't experience any of the problems which have been described by other individuals in this thread.
Now here is my problem.
I can connect once and it stays connected for about a day & night cycle. The very next morning after I switch on my pc and try and connect, it refuses and gives me a NetBios error and failed to log in. I have tried the 'fix' on here for that but that doesn't solve it. However, if I update the Time Capsule without changing any settings (I literally just open up Airport Utility and click manual and then update), it connects to the Time Capsule perfectly fine and I can once again access it, until the next morning when it all starts again.
I have tried everything under the sun and googled it to death without any resolution so I was wondering if there was anyone on here who has experienced the same problem and managed to find a solution. Any help would be highly highly appreciated!!!
Thanks.

look under system..system settings user accounts. make sure there still the main admin account and the temp .net account there. if there is and there no other account there then make a new account there. you should then be able to switch to the new account
without issues. if you dont own the pc or go a virus and your not the admin you wont be able to make a new account.

Similar Messages

  • Veriface 3 and windows 7 rc login problem

    I have u110 notebook, Veriface 3 doesnt work on the windows 7 login screen... its shows veriface login window and trying to connect a webcam then its shows only black screen in the veriface login window... But when i login manually then veriface application working good...
    How can i resolve this problem?

    When i selected "super energy sever mode" from the power options, veriface works on the login screen.... but when i selected other power options, veriface doesnt work.
    Message Edited by raid on 06-21-2009 12:52 PM

  • Oracle 10g express edition browser login problem

    Hi
    I installed oracle 10g express edition and after installing successfully logged in browser , unlocked hr login and also created one form then I shutdown the database and rebooted my pc and since then when I try to login to "go to Database Home page" after starting database , I get a cookie 127.0.0.1 with username and password, First of all I am not sure what username/password it is expecting, I believe it requires my Windows XP username and password , I tried to enter couple of times my pc login username which has administrator privileges, I also checked it has ora_dba group but after entering pc username , password browser opens saying "unauthorized". I created another os user and tried with that still same. I tried entering oracle password "SYSTEM" and password for it but still could not login, I tried HR username password still nothing.
    I tried disabling firewall but still same issue. I tried to re-install two time but still same .
    Start database dos prompt does show all the process are started successfully .
    I also did ping for 127.0.0.1 and it does ping.
    I tried everything what I knew.
    Can anyone please help me ..to resolve this issue .

    Hi
    This is how I resolved the browser login problem .
    I checked the listener log
    C:\OracleXE\app\oracle\product\10.2.0\server\NETWORK\log
    And found the error
    TNS-12542: TNS:address already in use
    TNS-12560: TNS:protocol adapter error
    TNS-00512: Address already in use
    I have another version for oracle installed on my pc .
    I ended both the oracle process (Oracle.exe) through the Task Manager
    Then manually started “OracleServiceXe” service through Component Services
    Control Panel – Performance & Maintenance – Administrative – Component Services
    Then did following
    Programs – Oracle Database10g ExpressEdition – Start Database
    Programs – Oracle Databse10g ExpressEdition – Go to Database Homepage –
    Enter username SYSTEM
    Enter password xxxxxx … whatever given at the time of installing.
    And I did successfully login to the browser .
    Hope this will help to those of you who have run into similar problem which I faced
    Good Luck .
    A. Patil

  • I was login a website ,and i have opened cookies , i want to open another window to login the same website use another account , and in the same windows can use the same account , how can i achieve it ? thinks

    i want to use firefox to login a website ,in the same window and different tags can user the same session
    but when i open other window and login the same website use different account .
    how can i achieve it ? thinks

    Your problem has nothing to do with the faults or limitations of a web browser.
    ''There can be only ONE active user logged in on a specific website during a whole Browsing Session. Even if you try to log-in using a new window it will sign-out the earlier User ID from that website. It will keep the most recent logged-in User ID active.''
    This is the general policy on which all websites are built. Even if you try to login the same website from another web browser, you won't be able to login from the second platform either. I just check it. Tried on Mozilla and Internet Explorer.

  • Simultaneous login problem

    Hi 
    I am having simultaneous login problems. In the past I have been able to sign into my skype account on both my Mac Book Pro and my Windows 7 desktop PC. However since I had to change my password I can only login into one machine at a time now. Also when I change my password on the desktop PC I can only sign into that skype / computer. Whenever I type the same account name and same exact password on my Mac Book Pro, it says it doesn't recognize my sign-in details but I am 100% sure that I typed it in exactly the same way as I did on my desktop. Another is that when I reset my password on my Mac Book those details won't work on the Desktop PC and vice-versa.
    I would like to know what is the problem in this situation, I am not sure if this is an application error or a networking error where the account details are not signing in from a different IP or MAC address.
    Please and thank you!

    "The load balancing was already functional:"
    Do you have a description how to do that?
    I Would like to know how.
    "so ALL traffic, not going to the LAN network and so over this interface, went out on the DMZ interface, with source IP from LAN."
    If you put the VPN servers behind 1-1 NAT instead they will use the firewall as GW and the VPN clients will get at your remote sites/LAN IF you add routing definitions in VPN config what networks are reachable through VPN.
    Or you keep servers as they are but also add add more routing definitions in VPN AND static routes to each server with the firewall as gw to those remote networks. Default gw will still be through the DMZ IPs though.
    The problem with more than one VPN client from behind same IP address is, with your current server settings, most likely because of the client side NAT router isn't coping with the task. Your public IP VPN server(s) should mean NAT VPN problem is at the other end (customer/client network router/firewall).
    If two VPN clients behind same NAT router connected to different servers at your end, "12.34.56.80" and "12.34.56.81" (both are public IPs?) respectively I believe at least two should be able to connect.
    3G/4G modems isn't an option?
    Maybe try bringing your own tested working portable router (ethernet/wifi maybe includes a VPN client that connect to your servers) to the customer and put it temporarily on their LAN? There are these small new 3G/WiFi routers too. Depends on wether you need to be connected to customer LAN or not.
    Try other VPN solution, SSL or OpenVPN?
    Use both PPTP and L2TP simultaneously (PPTP could be troubelsome if GRE/TCP 1723 passthrough is disabled)?

  • Roaming profile login problem to the domain

    Hi all,
    Domain Environment, DC Server with Server OS of Microsoft Server 2008 R2 Standart SP1.
    Roaming profiles unable to login to the domain on couple of PC's. They just inserting the password, starting to wait to log in with "Welcome"
    on the screen, its thinking and looks like hes gona open the user's desktop but in this secong its just logging out back to the login screen.
    Thanks for your help.
    Best Regards,
    Vlad Dodin

    Hi Vlad Dodin,
    I want to get more information about this issue.
    Had you got any error messages during the login process?
    If no domain users can log into those PCs?
    If this is just a login problem in those PCs and there is no error Roaming profiles error during the login process, this article may be helpful for you:
    How To Fix Stopping, Freezing, and Reboot Issues During Windows Login:
    http://pcsupport.about.com/od/findbysymptom/ht/windows-freezes-reboots-during-login.htm
    Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information
    I hope this helps.

  • Very slow Windows domain login over IPSec VPN

    Hi
    I'm experiencing very slow Windows domain logins over an IPSec VPN connection. The AD is in Site 1, some users are in Site 2. Two Cisco ASA firewalls connect both sites by an IPSec VPN over the Internet.
    I made some registery changes on the Windows XP client on site2 to let Kerberos communicate over TCP instead of UDP. Still the logins take extremely long (45 minutes). Profiles are very small, so there had to be a problem with Kerberos, MTU sizes or somethin like that. I already changed the clients MTU settings to 1000 byes, but login is still very slow. I made some sniffer logs...
    Does anybody know what the problem can be ?
    Regards
    Remco

    Hi Remco,
    The most common issue with slowness over VPN is going to be fragementation. In general below are the recommendations to avoid fragmentation
    1. For TCP traffic, use "ip tcp adjust-mss 1360" on the Internal LAN Interface on the Router. If you are using GRE then configure "ip mtu 1400" under the Tunnel Interface.
    If you are not using GRE then the value of "ip tcp adjust-mss" depends on the type of transform-set being used E.g. AES\3DES etc, so you can increase the value of TCP adjust command from 1360 to a higher value. Though I will start from 1360 first for testing.
    Also take a look at the below article for MTU Issues
    http://www.cisco.com/en/US/customer/tech/tk827/tk369/technologies_white_paper09186a00800d6979.shtml
    Thanks,
    Naman

  • How to handle WebIntelligence Login Problems?-Troubleshooting Guide needed.

    Hello experts,
    We are using Business Objects XI 3.0 running on Windows Server 2003 Enterprise X64 Edition with Service Pack 2 and
    Microsoft SQL Server 2005 Standard Edition (64-bit). We are using Windows Active Directory Authentication (Kerberos SSO)
    and sometimes can't login to (java) InfoView using the http://<serveraddress>/InfoViewApp/logon.jsp and got either
    the message "Unable to logon to infoview ,Please contact your system administator for assistance.Please close your browser before continuing",
    or do not get any message and the browser window shows an empty login frame where the User name,Password and Authentication
    are not displayed. (The login window doesn't give any idea what the problem is all about..)
    In such cases, I try to login using the Web Intelligence Rich Client using the same username&password, and don't experience any problems.
    Searching in Windows Event Viewer, can't find any hint. As my final attempt, I re-start the Server Intelligence Agent and Apache Tomcat,
    if it still doesn't help, I re-start the operating system and hope the login problem gets solved..
    Does anyone have trustful troubleshooting steps or better an official troubleshooting document (couldn't find any)?
    Best regards;
    Ozcan.

    Hi Bashir and wavery,
    Thanks for your replies. Do you know where to download the update / packs ? I tried to find them under SAP Support Portal -> Downloads -> Business Objects Downloads, but couldn't find any matching item.
    Regards;
    Ozcan.

  • Hide server window at login?

    hey there everybody. So I have a network drive set to automount at login. I just dragged the volume into the account login items, which worked great. however, even when ticking the hide box, it still opens up the finder window at login (of the server). Is there anyway I can get it to hide? thanks.

    This is a problem that got introduced in 10.5.8 (was fine in previous 10.5.x versions). It is present in Snow Leopard (10.6.x) and so far Apple Technical support is not sure if it will be addressed. I personally map to 6 different network volumes so this is extremely irritating. Please send feedback to Apple asking that they fix this problem. The more people who do this, the more likely they are to fix it.

  • Please help ASAP! I downloaded an app to change the Windows 10 login screen & now the screen flashes

    I downloaded Windows 10 Login Background Changer and now when my laptop starts I can't even get to the login screen. After the Acer screen at startup, it says "Please Wait...." but then the screen just flashes continually. Please help ASAP! Thank you!

    I did the exact same thing and had a very similar issue (flashing lock screen and couldn't get past the lock screen). I tried a system restore, resetting my PC, doing a clean install of Win10, and both methods of booting in SafeMode -- none of these methods worked. Called Microsoft several times; Level 1 tech told me to do a USB installation of Win10 (couldn't get my laptop to restart the way the USB installation needed); Level 2 tech told me to do a USB installation of Win8.1 (again did not work because my laptop could not restart properly). Gave up with tech support. The only way i was able to fix this problem was by choosing the "restore PC to factory settings" option. All your files and programs will be lost, but all of mine were already lost anyway after I tried doing a clean install of Win10. My laptop (S7-392) restored to Win8; I updated all my drivers and then made a recovery drive; did a USB installation of Win8.1, updated drivers and made another recovery drive. I have since done a USB installation of Win10 and upgraded my drivers. IF the same issue happens again i'll just end up reverting back to Win8.1 for a while.

  • Password / login problem

    hi
    i've installed oracle 10g . it works fine but next day it says "login denied unable to login " and i've chked for password expiry date its null and i've given some distant date even then i face same problem . So I reinstall every day , but is there any solution to this .
    coz i create my own table space users and load some people soft tables to work . but i find login problems . I have saved screen shots of db pswd / login that i give evry time i load .
    ..KC

    I'm confused. You install ORACLE on a day by day bases just because the pw "got lost"? ORACLE would be out of the market if that is the only solution.
    I assume you are on windows right?`You installed under your account right? The database services got started right? So go into CMD
    Microsoft Windows XP [Version 5.1.2600]
    (C) Copyright 1985-2001 Microsoft Corp.
    C:\Dokumente und Einstellungen\Andy.ABREXISSERVER1>sqlplus / as sysdba
    SQL*Plus: Release 11.2.0.1.0 Production on So Nov 21 14:31:46 2010
    Copyright (c) 1982, 2010, Oracle.  All rights reserved.
    Verbunden mit:
    Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    SQL> select user from dual;
    USER
    SYS
    SQL> select count(*) from dba_users;
      COUNT(*)
            42
    SQL> alter user system identified by admin;
    Benutzer wurde geõndert.
    SQL> EXIT
    C:\Dokumente und Einstellungen\Andy.ABREXISSERVER1>sqlplus system/admin@orcl
    SQL*Plus: Release 11.2.0.1.0 Production on So Nov 21 14:37:29 2010
    Copyright (c) 1982, 2010, Oracle.  All rights reserved.
    Verbunden mit:
    Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    SQL>NO need to reinstall as long as you have access to the owner account of ORACLE.
    -- andy

  • Reopen windows on Login, broken.

    Hello,
    There's something wrong with the "Reopen windows at Login" function on my mac.
    We're using Mac OS X server, with mobility sync; so files are synchronised with the server etc, etc.
    On login, TextMate, Spotify, and a broken Messages instance all open up. There's nothing in the login items, and I've tried clearing the saved application states locally, and on the server. But nothing will reset them. Even when I uncheck "reopen at login", they still reopen!
    Anyone got any ideas why?

    This is for Lion, but the suggestions should still be valid.
    https://discussions.apple.com/message/17711289#17711289
    Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
    Isolating an issue by using another user account
    If the problem is still there, try booting into the Safe Mode using your normal account.  Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don't do them all at once.
    Safe Mode
    Safe Mode - About

  • My MacBook Pro Retina's Bluetooth chipset unknown/odd login message on the login screen states Login Window Authentication Login window Name edit text has keyboard focus. In addition, the login screen is not remembering me

    I have been experiencing several issues with my MacBook Pro Retina mid 2012. My MBPR is scheduled to go into the depot. However, I am wondering if anyone may be able to shed light on a few issues as this is the third "official" time my MBPR is going back for service ("one depot" trip; "one authorized" dealer; several in-store visits).
    My Bluetooth is stating that the Bluetooth Chipset is Unknown (0). I also have had Bluetooth Preferences mysteriously change on me. In addition, while Bluetooth is off there are two serial modems turning on. I have turned them off, but they continue to pop up.
    In addition, when I log in, my MBPR is not remembering me and my login name is not appearing on the slate-gray screen. The name and password are blank and the following message appears in the lower left hand corner. "login window authentication login window Name edit text has keyboard focus."  As a side note, I am the only user. The login issue is a recent occurrence as we just totally wiped it again via a Command + R, and I don't believe I have an accessibility setting set to anything that would cause this, but wanted to check.
    Should I be concerned here? Has anyone else had issues like this? I don't want to worry if I don't have to. I have had so many issues over the course of nine months. 5-6 wipes. Airport card replaced and I am about to pull my hair out if my MBPR doesn't come back worldly like clock work this time. I just can't send my days trying to get a $2300 product to work for me any longer. No idea what is wrong with it, but it is driving me insane. Cross your fingers for me and any guidance you have or thoughts would be welcomed. Thank you. EMM

    A few more issues...
    In Console, the following is greyed out:
    User and Diagnostic reports
    Com.apple.launchd.peruser.0
    Com.apple.launchd.peruser.88
    Com.apple.launchd.peruser.89
    Com.apple.launchd.peruser.92
    Com.apple.launchd.peruser.97
    Com.apple.launchd.peruser.200
    Com.apple.launchd.peruser.201
    Com.apple.launchd.peruser.202
    Com.apple.launchd.peruser.212
    *[user logs are accessible]
    Krb5kdc
    Radius
    My guest files are locked, but again I am the administrator of MBPR.
    I am worried about a keystroke logged or at least, trying to rule it out.
    Also:
    Mdworker32(225) [and other mdworker numbers] are sandboxing; stating deny Mach-lookup
    Com.apple.Powermanagement.control, etc. long attachment with those files with version: ??? (???).
    Postinstall: removing applications/Microsoft Office 2011/Microsoft Outlook.app
    WARNINGS in Console include:
    [NSImage compositeToPoint:fromRect:operation:fraction:] is deprecated in MacOSX 19.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction] instead.
    There are a ton of other warnings. Before I go through this again, can someone tell me if this is normal (all of it -- above too); or if these are symptoms is a keystroke logger or hardware issues? 
    I ask because originally, when my computer went in for diagnostics (more than once), Apple stated the hardware was fine (other than Airport Card -- finally). However, if I've done 5-6 total wipes; created new users; do not have sharing set-up; have not played around in Terminal; and am up-to-date with versions -- and various issues KEEP COMING BACK -- I am left wondering if a keystroke logger would be possible here?!? I thought maybe a faulty logic board, but why would diagnostics be okay, then? Not trying to be hyperbole, just desperate.
    Please help me rule keystroke logger out or at least, tell me so I know, so I can take appropriate action. If you think it could be the logic board with symptoms above, that would be a great too.
    All I want to do is use the computer as intended, but I can't seem to get a real answer, so after nine months -- I am turning to the communities to see if anyone -- anyone at all -- can help. The last thing I can do is have the MBPR come back from the depot and the same thing occur. Any guidance or advice would be so gratefully appreciated.

  • I have lightroom 5 with 5.7 updated.   I use windows.  My problem is with the spot healer or remover.  It worked perfectly when I click on it it don't have the additional circle with a line attached to it where I can move it to another place for better sa

    I have lightroom 5 with 5.7 verson updated.  I use windows.  My problem is with the spot healer or remover in the develop.  It worked perfectly for a while and then suddenly the other circle with a line attached to it where you can move it to a better spot stopped showing up.  I uninstalled the software and re installed it again but it didn't fix the problem and its still the same.  Help please.

    Does the iPod work OK?
    Does it charge when connect to the computer?
    Does it appear in My Computer?
    Look at the dock connector on the iPod. Compare with the iPod that does work/connect.
    I suspect you have a 2G iPod. Those can only go to iOS 4.2.1
    http://support.apple.com/kb/HT1353#iPod_touch_late2009
    iPod touch (3rd generation)
    iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
    The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.

  • Windows Shared Printer - Problem adding: Error 256

    Getting error 256 (username and password) when trying to add a windows printer connected to the LAN which is shared.
    Any clues to the proper method of doing this?
    Beavis2084

    Unfortunately, I think several things can cause that
    error. Please try the Advanced Windows Printer via
    Samba technique:
    In Printer Setup, click Add, then hold the option key
    and click More Printers, select Advanced from the
    bottom of the first menu, select Windows printer via
    Samba. Enter the URI like this:
    smb://usernameonPC:password@[IP address of
    PC]/printersharename
    I have tried your suggestion but no success. To be clear, I used my Windows XP login name for "usernameonPC" and my server name for "IP address of PC" and my printer pool name for "printersharename". Was this right?
    I read elsewhere that I should turn on "Sharing" functions on my PC, which I tried. I also read that I need to make sure I have a "network account" which I tried. Nothing is working. Pretty frustrated now. Thanks for your help. Is there anything else I should be trying?

Maybe you are looking for