Windows 8.1 and FTP problems

Hello,
I am having problems with Windows 8.1 and FTP clients.
I am using Syncback (just takes forever) and Filezilla 3.7.3 Portable, the last one gives after some time the following error "The maximum number of clients (10) for this user are already connected".
Setting the maximum number of clients on the server form 10 to 15 has no noticeable result.
When using the same network, computer and software, but now Windows 8 (different partition on the same computer), the FTP job just runs fine with no problems.
Should Windows 8.1 have special settings to be able to use FTP?
Thanks, Wouter

Please try these steps:
Reducing simultaneous connections for incorrectly configured servers
https://wiki.filezilla-project.org/Using#Reducing_simultaneous_connections_for_incorrectly_configured_servers
Make sure that you close connection as soon as you are done with them, as some ftp clients will generally leave their connection open unless told otherwise. Additionally, some clients such as Filezilla will allow multiple connections for any new activity,
which uses up connections quickly. While this does make for faster transfers.
I use mostly Cute FTP and I have been sometimes doing it to just close ftp software (Alt+F4) and not closing connection; but the point is that when you have been connected then you must close connection properly as well.
Regards,
Kate Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

Windows Vista ULT and Quicktime problem

I apologize if this has been posted already, I did a search and found nothing so here goes...
I just installed Windows Vista Ultimate and wanted to get iTunes and Quicktime running as soon as I could. I installed the latest version found on apple's website but every time I try to start Quicktime up, it does absolutely nothing at all. I try to click on a quicktime file and it does nothing as well. Even stranger, I try to uninstall quicktime and it hangs for a sec and then pretends I never asked it to do anything.
iTunes crashes every time I try to run it but it WILL uninstall.
Anyone know a fix to any of this?
Mahalos plenty!
-Jordan
P4 3.2ghz 2gig RAM Other OS

Right, I read that article and did what they asked, but it didn't work and doesn't address the problem I have now.
According to the info Apple provided on that article, it implies that iTunes and Quicktime will work with Vista. I can wait for an update if thats the case, I just want to make sure I'm not doing anything wrong.
Mahalos!
P4 3.2ghz Windows XP Pro

Windows 8.1 and FTP (intermittent problems)

I have updated to windows 8.1 recently and i have found that my FTP connections (in every ftp program i have) will work for a good 5-10 minutes before it becomes completely unresponsive ("connection timed out") and to get it working again I need
to reconnect to my wifi.
firewall is off completely
no anti virus of any sort
my ftp server works on xp 7 and windows 8.0
passive or active, doesn't matter. it doesn't work.
when i reconnect to my wifi it fixes it temporarily.
and most importantly, is there any solution to this?
Thanks in advance, Nate.

I can confirm the same exact problem.
If I reinstall Windows 8 everything is fine; the moment after the 8.1 upgrade, FTP connections are unstable.
It has nothing to do with firewalls, network or FTP clients.
I also tried to update network drivers but nothing changes.

Dell Audigy 2 and Windows SP3 driver and static problems

SB0243
Ok, Creative you and Dell have left us customer behind and giving us the shaft.
I know you tell us to go to Dell to get drivers, and Dell still has the same driver posted they had when i bought my PC in 2003.
Funny thing is that the only driver i find that work without the static problem is the one from the creative CD from 2003. The only catch is that none of the other sound Apps will install or work with windows SP3. So you end up with a card that has sound without static but only in two speaker mode, no mixer, EAX, CSMM, sound bank, etc... you know all the other stuff.
I have installed Danial K driver at one time and they worked good for months then the static came back one day. Now after a fresh install of windows with SP3 i end up here with only the old driver working with just two speakers.
This is very sad that a big company like creative can not create a driver that works with current software. You need to fire all your programmer and go hire two with all the money you paid everyone else and maybe then these two top programmer might be able to make something that works. This has become a joke in the sound industry.
It was said that this ship is sinking, i think it has sunk at this point, us rats are jumping ship to some other card that works. Most likey it is not going to be from creative.
Rainey

?Hey, I cant get CMSS to work here, im on windows 7 32bit, wich CMSS version are you using? I cannot open THX Console or EAX Console.

Bluetooth problem in ideapad s210 touch windows 8.1 and audio problem

Hi .. i have lenovo s 210
i have a problem with audio output, the sound is muted and it said that my bluetooth audio device can not be started. i download realtek High definition from the support system and the audio system start working again. But when i check the device manager the bluetooth problem still not fixed. It said i had a code 10 problem. I just recently update my windows to 8.1, but before there is no problem with the audio... and recently i find out that i can not use my bluetooth too. and all the bluetooth system seems doesn't work out
what should i do??
thanks

Actually, I solved this issue myself after a while.
I induced a system restore prior to the date when I began to experience this error.
It then happened once more, so I went to the "PC Settings" menu and selected "Update and recovery".
There were apparently updates to be installed, so I clicked "More details/information", and found that there were 3 Intel-related drivers that were listed, but for some reason, Windows 8 didn't automatically install them, so I checked each one of them and proceeded to install them and it has been smooth sailing for me ever since that.
SO.
A piece of advice for all those who have experienced the issue I detailed in my former post:
Check what updates need to be installed on your computer in the "PC Settings" app thing, and see if there are any driver-realted updates (like for your graphics card, especially).

T60p & Windows 7 Pro and Bluethoot problem with Access Connections.

Hi,
I reinstalled Windows 7 Pro (64bit) at my T60p laptop.
I use Access Connections (v. 5.97) manage my wi-fi, lan connections.
(installed with all features lan, wi-fi, modem etc.)
So here is problem.
When I start Access Connection. Bluethoot goes ON ...
Trying disable Bluetooth via Access connectios (Power Off), but it's still going "ON" and stays "ON"...
Any good solution to keep bluethoot off without disable it at bios?
Earlier version of Access Connections keeps bluetooth OFF...
/P

If you are not using the Bluetooth and you want to disable it, the easiest way is to disable the device in the Device Manager.
Go into the Device Manager by searching for Device Manager in the start menu, Open the Device Manager and select hardware, choose the Bluetooth device, right click, and finally choose 'disable'. If you want to use the Bluetooth device in the future you will have to return to the Device manager, right click and 'enable' the device.
I hope this information has been helpful, please let me know if you have any further questions.
Thank you for being a part of the Lenovo Family,
Catie
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Donate KUDOS and Click "Accepted Solution"

WLC and windows radius issue and another problem

Hi everyone.
We have a problem with a costumer wireless infraestructure which has a WLC using a Windows 2003 radius server. for authentication.
The users can't connet to the SSID from monday. Anything haven't been changed and the configuration is correct.
I think its a client problem because the clients who use Linux can connect.
Any idea?
I have attached a debug dot1x events when a windows client try to connect.
We have another problem with another SSID using local wpa2/pkm/ascii authentication..
This SSID is used for smartphones. The clientes who use Android can connet, the clients who use IPhone can't.
Is this a cospiracy? xD
Thank you for avance.
Best regards

for the debug you attached, I see the client send an EAPOL start message, after it gets the Identity request. It seems to move beyond that, and then
Jul 30 15:36:47.396: 18:3d:a2:65:bd:54 Processing Access-Reject for mobile 18:3d:a2:65:bd:54
I'd take a look at the IAS logs to see why this particular client was rejected.
HTH,
Steve
Please remember to rate useful posts, and mark questions as answered

Yoga 11S Windows 8.1 and battery problem

Just got the 11S. First did all the windows updates and then did the windows 8.1 upgrade. With the exception of the missing dolby audio driver, the updates and upgrade went flawlessly.
Then I noticed that the battery was stuck at 62%. I did some research and tried changed the Lenovo Energy Management settings, nothing I could do helped. I uplugged the machine and let the battery drain but if I plugged it in, the percentage would not change.
I finally called tech support and they worked with me for almost 2 hours uninstalling and reinstalling a variety of drivers both for the 11s and other machines that they thought might work. After no success, I was told it was Windows 8.1 which was causing the problem and I needed to reinstal Windows 8.
Reinstalling WIndows 8 did not help the problem. The battery still wouldn't charge at all and the percentage was down to 32%. A return/exchange was set up and I should be getting a new machine.
Question now, I saw the 11s listed as being 8.1 compatible on one of the other forums here. Has anyone successfully upgraded to 8.1 and the battery is still charging and the rest of the machine still works?
Solved!
Go to Solution.

Received the replacement yesterday. This one seems to be fine. I was able to apply the Windows updates and then upgrade to 8.1 without any major issues. I did have to reinstall the audio drivers to get the dolby home theater boot error fixed but I had to do this with the original machine as well. I installed all the 8.1 drivers on the website as well.
I do have a concern as to whether the original machine was new or a repackaged return. When I first plugged in the original machine, the battery was at 62% which now looking back is odd. The replacement machine was at 60% which makes sense as it is at the limit. 62% is past that but not fully charged either. It is as if someone had already had this machine plugged in, had problems with something, possibly the battery charging, and returned it. The machine was then cleaned up and repackaged but nobody every checked the battery.
It's just a theory but something was not right with the first machine.

Windows 2k server and decimal problem

Our essbase server's operating system is windows 2000. When loading data, especially dollar amounts greater than $10 million, we get xxx.549999 instead of xxx.55 which causes erroneous numbers in variance % calcs. Hyperion finally said today this is a known issue with the servers operating system and there are no fixes. Anyone else have this problem? Or found a solution?

More info on the scenario
The protocol is TCP/IP and there's only one networkadapter and we're able to login to this server so it's seems to me that the combination of protocol and adapter is working fine. Ping to the databaseserver is also ok.
The problem with the terminalserver started one week ago without any changes done to the server.
Have seen on unix-systems that one possible reason for the 12538 could be a missing link between the adapter and the product (like sqlplus) but haven't found a way to verify this in the NT-world.
Thx,
Baard

Windows 7 software, and password problems

A friend got a new computer (old had had 30 gb drive, 256 mb Ram, and viruses). So I helped hime pick up a new laptop (Windows 7 home premium), etc, and am helping him get everything set up. He has a Linksys wireless router wrt54g V8. He was able to connect immediately to the network as there was no security on it (it said unsecured)...his neighbors had secured networks, he did not. I said that this needed to be fixed. He had the origional cd (bought 11\07), so I tried to install the software on Windows 7. It would not install (wrong operating system\whatever). In my very limited knowldge of routers (set up mine a few years ago), I remembered that there was an ipaddress 192.168.1.1 where some things could be changed. We did get to the wireless tab, and there was a 'reset' button on it. I thought that this would be where we would be able to change it from unsecured to secured...apparently I was wrong. By clicking that button, his network disappeared from the list of networks. There is a new linksys... network in the list now. Anyway, I got him going again hard wired to the comcast router. How to correct this situation, I have a number of questions? Does this router work on windows 7, and where is the software to download and how to execute it (I did find a .bin file on line, but have no idea of how to execute it, if everything I need is in it, and if it is applicable to windows 7). OK, if I do not need to install anything on the new system, how do I recreate the wireless connection to the wireless router with a secured connection? How do I create a new network (or recover the old one) and secure it without software, and some kind of password (which he does not know)? Thanks.

What is the Model no of the Router...?
As you pressed the reset button on the router..You need to configure the router from scratch.And the router does works on Windows7.
As your ISP is Cable,follow the steps given here to configure the router.

Windows 8.1 Pro - FTP.exe not able to put file to FTP Server

Hi
We have replaced our Windows XP environment to Windows 8.1 Pro. Now I have problem with sending files through FTP to very old devices. Devices are runninng FTP Servers. Each time I try to "PUT" file on Windows 8.1 I receive message after some time:
"Connection closed by remote host"
If I make the same on Windows XP file is stored on FTP successfully.
From Windows 8.1 I am able to upload software only via Filezilla, but I need command line solution like FTP.exe or ncFTP.exe (non of them are able to stor file)
I have observed in Wireshark, that ftp.exe sends about 80kB of data, waits for some time and then it stops.
Summary of my problem:
Source Appl
Destination
Status
Win XP ftp.exe
FTP Server upload ok
Win 8.1 ftp.exe
FTP Server upload failed
Win 8.1 ncFTP.exe
FTP Server upload failed
Win 8.1 filezilla
FTP Server upload ok (but no command line solution)
Win 8.1 environment:
- standard installation of Windows 8.1 with newest Microsoft patches
- firewall ports - opened for inbound and outbound traffic
- no antivirus
FTP Server on problematic devices:
- old FTP Server, transfer in passive mode
I need command line solution tu upload files. Now I am not able to upload 1500 devices as we don't have Windows XP anymore.
What I have observed, when I type "PUT file" it takes about 20-30 seconds to start transfer on Windows XP or through filezilla.
Is there any problem with timeout in Windows 8.1 when it transfer files to old FTP server (working in passive mode)?
Thanks and regards,
Marcin

Hi Marcin,
Here is a thread talking about Windows 8.1 and FTP, see:
Windows 8.1 and FTP problems
https://social.technet.microsoft.com/Forums/windows/en-US/db3793a6-2810-464c-af9a-522b05f51ba9/windows-81-and-ftp-problems?forum=w8itprogeneral
Further, I am currently checking on the issue, if more things found out, I will update here.
Thank you for your understanding.
Best regards
Michael Shao
TechNet Community Support

Just purchased Wndows Vista and having problems with the port for Palm 125

I just purchased a Windows Vista computer and having problems with getting my Palm 125 to sync with the desktop. I get an error message saying: "Com1 not available" What do I do?
Thanks,
Frustrated
Post relates to: Palm m125
This question was solved.
View Solution.

Sorry, that didn't work. I get no drop down menu from the Hot Sync Manager for the Serial Port. What comes up often is: "The selected port, COM1, is not available at this time. Hot Sync Manager will open the port when it becomes available."
Could it be the Norton Antivirus Firewall that is preventing the Hot Sync Manager to open the Serial Port? Just a thought. Thanks for your help.
Post relates to: Palm m125

Ftp activity monitoring on windows and ftp service

hey guys,
i have several problems configuring the ftp service on my xserve - when creating a user, which will connect to ftp, everything seems to be ok, but when trying to connect - it does not make the LIST command. failed to get the list and that's it.
when trying to connect not in a just simple ftp mode, but in sftp (ssh) - it connects with no problem, fast, but seeing all of the directories in my server. well this is the main problemo i get. i want a user to see only his folder with it's contents. yes, i tried "user can see his home directory only". nothing helps. or i do smthng wrong with the creating of users and their dir's?
another thing. did you guys ever heard of a thing like to monitor ftp activities in the xserve on windows? see, we are a printing house. the clients are uploading their files onto the server via ftp, and a person must see all of the activities, so he can operate with the files later on using the workflow system. well another way or solution would be configuring automator do deliver the files into a certain hotfolder, so the workflow can automatically process them. to tell the truth, i never tried automator:) does it do smthng like this? like, it sees when the file is uploaded to the end and delivers it?
i got the xserve not so long ago. well i thing that was the smartest decision of this year. the thing is, all workstations in the house are pc's. don't ask why:) it's because of the software was bought long ago and was for win, so we have to buy everything new if we want to get mac's in the house. aaaand it costs a bit of fortune in the printing business.
so only the server is xserve, all workstations are pc's, so that is the question: how to monitor ftp activities on the xserve on a pc workstation?
guys, please help. this is a great importance to me.

when trying to connect - it does not make the LIST command. failed to get the list and that's it.
This is a classic passive vs. active FTP problem - the #1 problem with FTP and firewalls. You need to toggle the mode in the client.
another thing. did you guys ever heard of a thing like to monitor ftp activities in the xserve on windows
The only thing I can think of is going to be server-side. Either a Folder Action (or maybe Automator workflow) or a process that watches the FTP logs and takes appropriate action. Either way this is something you want to run on the server rather than on a client system.

Dual boot Windows 7 (64) and Arch Linux (64) problems

Hello:
I am new to Arch Linux and just finished installing the 64bit on my laptop. It had a prebuilt Windows 7 (64) installed which I kept but split the hdd from 160Gb to 80Gb and 80Gb. I installed Arch there and set 4 partitions, all of them as Logical - a 64 MB ext2 /boot partition; a 512 MB swap partition; a 15 GB root partition; and the rest as my /home partition. My partitions look like this:
Disk Drive: /dev/sda
Size: 160041885696 bytes, 160.0 GB
Heads: 255 Sectors per Track: 63 Cylinders: 19457
Name Flags Part Type FS Type [Label] Size (MB)
sda1 Primary Unknown (27) 12889.02
sda2 Boot Primary NTFS 106.93
sda3 Primary NTFS [] 73915.11*
sda5 Logical Linux ext2 65.81*
sda6 Logical Linux 509.97*
sda7 Logical Linux ext2 15002.92*
sda8 Logical Linux ext2 57549.55*
The install was succesful(this was running from the core install cd) and I installed GRUB to my /boot but when I restarted it loaded Windows 7. I have used Knoppix USB disc to boot and see my Arch Linux install files and edited the /boot/gur/menu.lst file.
In Windows I installed EasyBCD 1.7.2 and tried to get NeoGrub bootloader working as a dual boot. I tried getting rid of the boot flag for Windows with cfdisk and setting it to my (Logical) sda5. That did not work. So far the only way I have booted into my Arch Linux install has been by going to the Live CD, choosing "Boot from Existing Linux Install" and editing the command files there.
root (hd0,4)
kernel /vmlinuz26 root=/dev/sda3 ro
initrd /kernel26.img
My goal is to get a dual boot working for Windows 7 and Arch Linux 64 and continue installing the Xorg and KDE to Arch. I just don't know what the problem is here. I don't mind reinstalling Arch if something went wrong, but I would like to keep my Windows running in order and add Arch on.
Any help would be greatly appreciated.

I ran the LiveCD and chose "Install to MBR hd0". I ended up with this:
setup hd(0,1)
Checking if "/boot/grub/stage1" exists.....yes
Checking if "/boot/grub/iso9660_stage1_5" exists.....yes
Running "embed /boot/grub/iso9660_stage1_5 (hd0,1)".....failed(this is not fatal)
Running "embed /boot/grub/iso9660_stage1_5 (hd16)".....failed(this is not fatal)
Running "install /boot/grub/stage1 d (hd0,1) /boot/grub/stage2 p (hd0,1) boot/grub/menu.lst".....failed
Error 31: File is not sector aligned
My entry for Windows into the menu.lst looks like this:
# (0) Arch Linux x64
title Arch Linux x64
root (hd0,4)
kernel /vmlinuz26 root=/dev/disk/by-uuid/3841273c-d91e-41d6-9dbf-716a15d03a01 ro
initrd /kernel26.img
# (1) Arch Linux x64
title Arch Linux x64 Fallback
root (hd0,4)
kernel /vmlinuz26 root=/dev/disk/by-uuid/3841273c-d91e-41d6-9dbf-716a15d03a01 ro
initrd /kernel26-fallback.img
# (2) Windows 7
title Windows 7
rootnoverify (hd0,0)
makeactive
chainloader +1

HT1386 I just reinstalled my windows operating system and decided to put on windows 8. After loading all of my music back into a freshly installed itunes, my 4th gen ipod is not recognized by itunes. My 1st gen ipod nano works with no problem. Help!

reinstalled my windows operating system and decided to put on windows 8. After loading all of my music back into a freshly installed itunes, my 4th gen ipod is not recognized by itunes. My 1st gen ipod nano works with no problem. I can eliminate any problems with the cable and connection.
I've stopped and started the service, and also have performed cold reboots.
Nothing seems to have helped the situation.
Help!

See:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
iTunes for Windows: Device Sync Tests
Have you tried on another computer to help determine if you have a computer or iPod problem?
The iPod Classic uses different drivers than the Nano

Windows 8.1 and FTP problems

Similar Messages

Maybe you are looking for