Windows 8.1 having same issue: Windows could not parse or process unattend answer file (C:\Windows\Panther\unattend.xml) for pass [specialize]. A component or setting specified in the answer file does not exist.

I know there are similar other issues with IE 10 and Windows 7. This is WINDOWS 8.1, and the IE Welcome message is totally absent from the default unattend.xml in the c:\windows\panther directory. In fact, I did a sysprep without using any injected
unattend.xml - this is the Microsoft Default!
So I suspect this will start appearing all over again soon. Anyone figure out what was causing it?
Here is the new Specialize section from the xml:
<settings pass="specialize">
        <component name="Microsoft-Windows-Security-SPP-UX" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <SkipAutoActivation>true</SkipAutoActivation>
        </component>
        <component name="Microsoft-Windows-Security-SPP-UX" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <SkipAutoActivation>true</SkipAutoActivation>
        </component>
        <component name="Microsoft-Windows-SQMApi" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <CEIPEnabled>0</CEIPEnabled>
        </component>
        <component name="Microsoft-Windows-SQMApi" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <CEIPEnabled>0</CEIPEnabled>
        </component>
        <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            
            <ComputerName>Win8</ComputerName>
            <TimeZone>Pacific Standard Time</TimeZone>
        </component>
        <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            
            <ComputerName>Win8</ComputerName>
            <TimeZone>Pacific Standard Time</TimeZone>
        </component>
        <component name="Microsoft-Windows-Deployment" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <RunSynchronous>
               
                <RunSynchronousCommand wcm:action="add">
                    <Description>Enable Admin Account</Description>
                    <Order>3</Order>
                    <Path>net user administrator /active:yes</Path>
                </RunSynchronousCommand>
                <RunSynchronousCommand wcm:action="add">
                    <Path>powercfg -h off</Path>
                    <Order>4</Order>
                </RunSynchronousCommand>
                <RunSynchronousCommand wcm:action="add">
                    <Order>5</Order>
                    <Path>cmd /c %WINDIR%\Setup\Specialize_x64.cmd</Path>
                </RunSynchronousCommand>
            </RunSynchronous>
        </component>
        <component name="Microsoft-Windows-Deployment" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <RunSynchronous>
               
                <RunSynchronousCommand wcm:action="add">
                    <Description>Enable Admin Account</Description>
                    <Order>3</Order>
                    <Path>net user administrator /active:yes</Path>
                </RunSynchronousCommand>
                <RunSynchronousCommand wcm:action="add">
                    <Path>powercfg -h off</Path>
                    <Order>4</Order>
                </RunSynchronousCommand>
                <RunSynchronousCommand wcm:action="add">
                    <Order>5</Order>
                    <Path>cmd /c %WINDIR%\Setup\Specialize_x86.cmd</Path>
                </RunSynchronousCommand>
            </RunSynchronous>
        </component>
         <component name="Microsoft-Windows-IE-InternetExplorer" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS"
xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <BlockPopups>yes</BlockPopups>
            <CompanyName>FYM Inc</CompanyName>
            <DisableAccelerators>true</DisableAccelerators>
            <DisableDevTools>false</DisableDevTools>
            <DisableFirstRunWizard>true</DisableFirstRunWizard>
            <DisableOOBAccelerators>true</DisableOOBAccelerators>
            <DisableWelcomePage>true</DisableWelcomePage>
            <EnableLinksBar>false</EnableLinksBar>
            <FavoritesDelete>true</FavoritesDelete>
            <FilterLevel>High</FilterLevel>
            <Help_Page>www.google.com</Help_Page>
            <Home_Page>www.google.com</Home_Page>
            <LockToolbars>false</LockToolbars>
            <MSCompatibilityMode>false</MSCompatibilityMode>
            <NoDial>true</NoDial>
            <ShowCommandBar>true</ShowCommandBar>
            <ShowInformationBar>true</ShowInformationBar>
            <SuggestedSitesEnabled>false</SuggestedSitesEnabled>
            <SearchScopes>
                <Scope wcm:action="add">
                    <DisplayQuickPick>true</DisplayQuickPick>
                    <ScopeDefault>true</ScopeDefault>
                    <ScopeDisplayName>Google</ScopeDisplayName>
                    <ScopeKey>Search1</ScopeKey>
                    <ScopeUrl>http://www.google.com/advanced_search?hl=en</ScopeUrl>
                    <ShowSearchSuggestions>true</ShowSearchSuggestions>
                    <ShowTopResult>true</ShowTopResult>
                </Scope>
            </SearchScopes>
        </component>
        <component name="Microsoft-Windows-IE-InternetExplorer" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <BlockPopups>yes</BlockPopups>
            <CompanyName>FYM Inc</CompanyName>
            <DisableAccelerators>true</DisableAccelerators>
            <DisableDevTools>false</DisableDevTools>
            <DisableFirstRunWizard>true</DisableFirstRunWizard>
            <DisableOOBAccelerators>true</DisableOOBAccelerators>
            <DisableWelcomePage>true</DisableWelcomePage>
            <EnableLinksBar>false</EnableLinksBar>
            <FavoritesDelete>true</FavoritesDelete>
            <FilterLevel>High</FilterLevel>
            <Help_Page>www.google.com</Help_Page>
            <Home_Page>www.google.com</Home_Page>
            <LockToolbars>false</LockToolbars>
            <MSCompatibilityMode>false</MSCompatibilityMode>
            <NoDial>true</NoDial>
            <ShowCommandBar>true</ShowCommandBar>
            <ShowInformationBar>true</ShowInformationBar>
            <SuggestedSitesEnabled>false</SuggestedSitesEnabled>
            <SearchScopes>
                <Scope wcm:action="add">
                    <DisplayQuickPick>true</DisplayQuickPick>
                    <ScopeDefault>true</ScopeDefault>
                    <ScopeDisplayName>Google</ScopeDisplayName>
                    <ScopeKey>Search1</ScopeKey>
                    <ScopeUrl>http://www.google.com/advanced_search?hl=en</ScopeUrl>
                    <ShowSearchSuggestions>true</ShowSearchSuggestions>
                    <ShowTopResult>true</ShowTopResult>
                </Scope>
            </SearchScopes>
        </component>
         <component name="Microsoft-Windows-RemoteAssistance-Exe" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS"
xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
                <fAllowFullControl>true</fAllowFullControl>
                <fAllowToGetHelp>true</fAllowToGetHelp>
         </component>
         <component name="Microsoft-Windows-RemoteAssistance-Exe" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS"
xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
                <fAllowFullControl>true</fAllowFullControl>
                <fAllowToGetHelp>true</fAllowToGetHelp>
         </component>
         <component name="Microsoft-Windows-ErrorReportingCore" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS"
xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <DisableWER>1</DisableWER>
         </component>
         <component name="Microsoft-Windows-ErrorReportingCore" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS"
xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <DisableWER>1</DisableWER>
         </component>
        <component name="Microsoft-Windows-powercpl" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
             
             <PreferredPlan>8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c</PreferredPlan>
             
             
             
             
        </component>
        <component name="Microsoft-Windows-powercpl" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
             <PreferredPlan>8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c</PreferredPlan>
        </component>
       <component name="Microsoft-Windows-UnattendedJoin" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
           <Identification>
               <JoinWorkgroup>Workgroup</JoinWorkgroup>
           </Identification>
       </component>
       <component name="Microsoft-Windows-UnattendedJoin" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
           <Identification>
               <JoinWorkgroup>Workgroup</JoinWorkgroup>
           </Identification>
       </component>
        <component name="Microsoft-Windows-AllUserInstallAgent" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS"
xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <LogonWaitForPackageRegistration>false</LogonWaitForPackageRegistration>
        </component>
        <component name="Microsoft-Windows-AllUserInstallAgent" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <LogonWaitForPackageRegistration>false</LogonWaitForPackageRegistration>
        </component>
    </settings>
I'm thinking of dumping the entire IE section and see what happens.

I too received this error as I tried to run my first Windows 8.1 deployment. Per another post I commented out this line
<IEWelcomeMsg>false</IEWelcomeMsg>
from the IE section of the unattend.xml. I was then able to run my deployment. I do not see this line in your posting though.
I referenced this link even though it was for Windows 7.
http://social.technet.microsoft.com/Forums/en-US/c41a2b69-a591-4cd3-86ab-6a0f8a73b858/getting-windows-could-not-parse-or-process-the-unattend-answer-file-for-pass-specialize-with?forum=mdt
Hope this helps someone.
JayTheTech
To clarify, I edited the unattend.xml file from from Deployment Share, not C:\Windows\Panther.
DS\control\task sequence ID\unattend.xml
JayTheTech

Similar Messages

Since upgrading to the newest version of ios 8, I can no longer share my photos on facebook. I have tried going to setting-photos, but the facebook app does not show up for me to change the settings. Any suggestions?

Since upgrading to the newest version of ios 8, I can no longer share my photos on facebook. I have tried going to settings-privacy-photos, but the facebook app does not show up for me to change the settings. Any suggestions?

when you opened the shared library with the newer version of iPhoto (iPhoto '11) you were given a warning that your library would be converted and could not be used by older versions - you clicked ok to go ahead - there is no updo available - either upgrade to iphoto '11 of the MBP or load your backup of the iPhoto '09 library on it - older versiopns of i{Photo can not read newer libraries
LN

Windows could not parse or process unattend answer file (c:windows\panther\unattend.xml). Error message during setup.

I'm having an issue, with Windows 8.1 sysprep WIM, when applying the image and don't know what to do.
I am using the Windows 8.1 WADK/Windows Kits for Windows 8.1. Using the Image Manager for creating my answer file, using deployment/imaging tool for creating and editing my images, and using the same Windows 8.1 DVD media for my catalog as in my WIM. No MDT
involvement.
Using WinPE to clean and partition my disk and to apply the image.
I have done the best research I'm able to do at the moment and for this issue it all comes back to removing/editing the "IEWelcomeMsg" line.
I have left at false and removed the line as all have mentioned, however I'm still getting the error "windows setup: windows could not parse or process unattend answer file (c:windows\panther\unattend.xml). A component or setting specified in the answer
file does not exist".
Is there something I missed? From what I can tell for now, nope.
Any help to enlighten what might have been over looked would be beneficial.

Hi JFrederick,
Please try what Tripredacus suggested first.
For the error message, we have a similar thread for reference:
Windows
Could Not parse or process unattend answer file for pass [specialize]
The cause might be different, you may refer to the others who offered suggestions in the above thread.
Regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Windows Could Not parse or process unattend answer file for pass [specialize] after WDT Litetouch 'sysprep and capture'

I setup an ACER VM6620G (Win7x86) how I wanted, including disabling the administrator account and creating an administrator user "PVA"
Navigated to \\wds\DeploymentShare$\Scripts and ran the litetouch script. Chose my "Sysprep and Capture" task.
Everything went off without a hitch until I restarted the technician pc.
I got the dreaded
"Windows could not parse or process unattend answer file [C:\windows\Panther\unattend.xml] for pass [specialize]. A component or setting specified in the answer file does not exist"
I tried to deploy the captured image to the same computer and got the same error
I've scoured the internet for solutions (Shift+10 opens command prompt. Good to know!) with no luck.
I've saved the unattend.xml and looked for errors- going as far as to install an x86 Win7 virtual machine to validate the unattend.xml file in WISM
Other information that might be useful:
I never used WISM to create an unattend.xml nor did I attach one to the image.
I didn't try to copy user profiles/settings/migrate etc
I imported the captured image to WDT. Created a standard task and added 2 nodes
-Inject Drivers
-Install Application
As a side, I've got another image that I've already injected the drivers/installed the application as a test. Everything went smoothly.
+-----------------+
| Unattend.xml:
+-----------------+
<?xml version="1.0" encoding="utf-8"?>
<unattend xmlns="urn:schemas-microsoft-com:unattend">
<settings pass="windowsPE">
<component name="Microsoft-Windows-Setup" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
<ImageInstall>
<OSImage>
<WillShowUI>OnError</WillShowUI>
<InstallTo>
<DiskID>0</DiskID>
<PartitionID>2</PartitionID>
</InstallTo>
<InstallFrom>
<Path>\\10.0.0.1\deploymentshare$\Operating Systems\ACER Win7 x86 Capture\ACER Win7 x86 Capture.wim</Path>
<MetaData>
<Key>/IMAGE/INDEX</Key>
<Value>1</Value>
</MetaData>
</InstallFrom>
</OSImage>
</ImageInstall>
<Display>
<ColorDepth>16</ColorDepth>
<HorizontalResolution>1024</HorizontalResolution>
<RefreshRate>60</RefreshRate>
<VerticalResolution>768</VerticalResolution>
</Display>
<ComplianceCheck>
<DisplayReport>OnError</DisplayReport>
</ComplianceCheck>
<UserData>
<AcceptEula>true</AcceptEula>
</UserData>
</component>
<component name="Microsoft-Windows-International-Core-WinPE" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<SetupUILanguage>
<UILanguage>en-US</UILanguage>
</SetupUILanguage>
<InputLocale>0409:00000409</InputLocale>
<SystemLocale>en-US</SystemLocale>
<UILanguage>en-US</UILanguage>
<UserLocale>en-US</UserLocale>
</component>
</settings>
<settings pass="generalize">
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<DoNotCleanTaskBar>true</DoNotCleanTaskBar>
</component>
</settings>
<settings pass="specialize">
<component name="Microsoft-Windows-UnattendedJoin" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
<Identification>
<JoinWorkgroup>WORKGROUP</JoinWorkgroup>
</Identification>
</component>
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
<ComputerName>PVA-PC</ComputerName>
<RegisteredOrganization>PVA</RegisteredOrganization>
<RegisteredOwner>PVA</RegisteredOwner>
<TimeZone>"Eastern Standard Time"</TimeZone>
<DoNotCleanTaskBar>true</DoNotCleanTaskBar>
</component>
<component name="Microsoft-Windows-IE-InternetExplorer" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<Home_Page>about:blank</Home_Page>
<IEWelcomeMsg>false</IEWelcomeMsg>
</component>
<component name="Microsoft-Windows-Deployment" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<RunSynchronous>
<RunSynchronousCommand wcm:action="add">
<Description>EnableAdmin</Description>
<Order>1</Order>
<Path>cmd /c net user Administrator /active:yes</Path>
</RunSynchronousCommand>
<RunSynchronousCommand wcm:action="add">
<Description>UnfilterAdministratorToken</Description>
<Order>2</Order>
<Path>cmd /c reg add HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System /v FilterAdministratorToken /t REG_DWORD /d 0 /f</Path>
</RunSynchronousCommand>
<RunSynchronousCommand wcm:action="add">
<Description>disable user account page</Description>
<Order>3</Order>
<Path>reg add HKLM\Software\Microsoft\Windows\CurrentVersion\Setup\OOBE /v UnattendCreatedUser /t REG_DWORD /d 1 /f</Path>
</RunSynchronousCommand>
</RunSynchronous>
</component>
<component name="Microsoft-Windows-International-Core" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<InputLocale>en-US</InputLocale>
<SystemLocale>en-US</SystemLocale>
<UILanguage>en-US</UILanguage>
<UserLocale>en-US</UserLocale>
</component>
<component name="Microsoft-Windows-TapiSetup" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<TapiConfigured>0</TapiConfigured>
<TapiUnattendLocation>
<AreaCode>""</AreaCode>
<CountryOrRegion>1</CountryOrRegion>
<LongDistanceAccess>9</LongDistanceAccess>
<OutsideAccess>9</OutsideAccess>
<PulseOrToneDialing>1</PulseOrToneDialing>
<DisableCallWaiting>""</DisableCallWaiting>
<InternationalCarrierCode>""</InternationalCarrierCode>
<LongDistanceCarrierCode>""</LongDistanceCarrierCode>
<Name>Default</Name>
</TapiUnattendLocation>
</component>
<component name="Microsoft-Windows-SystemRestore-Main" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<DisableSR>1</DisableSR>
</component>
</settings>
<settings pass="oobeSystem">
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
<UserAccounts>
<AdministratorPassword>
<Value></Value>
<PlainText>true</PlainText>
</AdministratorPassword>
</UserAccounts>
<AutoLogon>
<Enabled>true</Enabled>
<Username>Administrator</Username>
<Domain>.</Domain>
<Password>
<Value></Value>
<PlainText>true</PlainText>
</Password>
<LogonCount>999</LogonCount>
</AutoLogon>
<Display>
<ColorDepth>32</ColorDepth>
<HorizontalResolution>1024</HorizontalResolution>
<RefreshRate>60</RefreshRate>
<VerticalResolution>768</VerticalResolution>
</Display>
<FirstLogonCommands>
<SynchronousCommand wcm:action="add">
<CommandLine>wscript.exe %SystemDrive%\LTIBootstrap.vbs</CommandLine>
<Description>Lite Touch new OS</Description>
<Order>1</Order>
</SynchronousCommand>
</FirstLogonCommands>
<OOBE>
<HideEULAPage>true</HideEULAPage>
<NetworkLocation>Work</NetworkLocation>
<ProtectYourPC>1</ProtectYourPC>
</OOBE>
<RegisteredOrganization>PVA</RegisteredOrganization>
<RegisteredOwner>PVA</RegisteredOwner>
<TimeZone>"Eastern Standard Time"</TimeZone>
</component>
<component name="Microsoft-Windows-International-Core" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<InputLocale>en-US</InputLocale>
<SystemLocale>en-US</SystemLocale>
<UILanguage>en-US</UILanguage>
<UserLocale>en-US</UserLocale>
</component>
</settings>
<settings pass="offlineServicing">
<component name="Microsoft-Windows-PnpCustomizationsNonWinPE" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<DriverPaths>
<PathAndCredentials wcm:keyValue="1" wcm:action="add">
<Path>\Drivers</Path>
</PathAndCredentials>
</DriverPaths>
</component>
</settings>
</unattend>

https://skydrive.live.com Here's the end of the log file:
2013-03-27 17:39:05, Info 2013-03-27 17:39:05, Info 2013-03-27 17:39:05, Info 2013-03-27 17:39:05, Info 2013-03-27 17:39:05, Info 2013-03-27 17:39:06, Info 2013-03-27 17:39:06, Info 2013-03-27 17:39:06, Info 2013-03-27 17:39:06, Error 2013-03-27 17:39:06, Error 2013-03-27 17:39:06, Info 2013-03-27 17:39:06, Error 2013-03-27 17:39:06, Error 2013-03-27 17:39:06, Info 2013-03-27 17:39:06, Info 2013-03-27 17:39:06, Info 2013-03-27 17:39:06, Info 2013-03-27 17:39:06, Info 2013-03-27 17:39:06, Info 2013-03-27 17:39:06, Error 2013-03-27 17:39:06, Info 2013-03-27 17:39:06, Info Also, here's my [Settings]
Priority=Default
Properties=MyCustomProperty
[Default]
SkipDomainMembership=YES
DomainAdmin=Administrator
DomainAdminDomain=go.local
DomainAdminPassword=************
SkipTimeZone=YES
TimeZone="035"
TimeZoneName="Eastern SkipLocaleSelection=YES
KeyboardLocale=en-US
UserLocale=en-US
UILanguage=en-US
Bootstrap.ini:
[Settings]
Priority=Default
[Default]
DeployRoot=\\10.0.0.1\Dep UserID=Administrator
UserDomain=go.local
UserPassword=***********
KeyboardLocale=en-US
SkipAdminPassword=YES
SkipProductKey=YES
SkipBitLocker=YES /redir?resid=55C3109D61329D02!108&authkey=!AG793wDwQuFZa1s
CMI CBS_Core_Finalize:Calling cbs core finalize complete
CMI Callback_CMI_ConfigInstall: CBS startup processing re-run complete.
[0x030023] CMI Callback_CMI_ConfigInstall: Exit.
[setup.exe] UnattendSearchExplicitPath: Found unattend file at [C:\windows\Panther\unattend.xml]; examining for applicability.
[setup.exe] UnattendSearchExplicitPath: Found usable unattend file for pass [specialize] at [C:\windows\Panther\unattend.xml].
IBS Callback_Unattend_InitEngine:Using unattend file found at [C:\windows\Panther\unattend.xml].
[setup.exe] ValidateSMIPass: serialized settings stream; status 0x00000000
[setup.exe] ValidateSMIPass: construct settings context; status 0x00000000
[setup.exe] SMI data results dump: Source = Name: Microsoft-Windows-IE-InternetExplorer, Language: neutral, ProcessorArchitecture: x86, PublicKeyToken: 31bf3856ad364e35, VersionScope: nonSxS, /settings/IEWelcomeMsg
[setup.exe] SMI data results dump: Description = Setting is not defined in this component.
[setup.exe] ValidateSMIPass: load SMI settings; status 0x00000001
[0x060432] IBS The provided unattend file is not valid; hrResult = 0x80220001
[0x060565] IBS Callback_Unattend_InitEngine:The provided unattend file [C:\windows\Panther\unattend.xml] is not a valid unattended Setup answer file; hr = 0x1, hrSearched = 0x1, hrDeserialized = 0x0, hrImplicitCtx = 0x0, hrValidated = 0x1, hrResult = 0x80220001
IBS UnattendErrorFromResults: Hit an unattend error; dumping any info we have about the failure...
IBS UnattendDumpSetting: ------Unattend setting error / warning------
IBS UnattendDumpSetting: Error code = 0x80220001
IBS UnattendDumpSetting: Pass = specialize
IBS UnattendDumpSetting: --------------------------------------------
IBS UnattendErrorFromResults: Error text = Windows could not parse or process unattend answer file [C:\windows\Panther\unattend.xml] for pass [specialize]. A component or setting specified in the answer file does not exist.
[0x0600c2] IBS Callback_Unattend_InitEngine:An error occurred while finding/loading the unattend file; hr = 0x1, hrResult = 0x80220001[gle=0x00000490]
IBSLIB PublishCriticalError: Publishing blocked message [Windows could not parse or process unattend answer file [C:\windows\Panther\unattend.xml] for pass [specialize]. A component or setting specified in the answer file does not exist.]
This installation is blocked from completing due to compliance failures or invalid input; this is not an internal error.
customsettings.ini as I think it changes the unattend?
Standard Time"
loymentShare$

The requested resource does not exist

Hello!
I have a programm, made in Visual Stuio2005(.NET). I installed the PDK for .NET and now i get this failure massage:
The requested resource does not exist.
Any ideas?

Hi Guntram,
Change link's url to some static url, like www.google.com and see if it works. If yes,
then the problem caused by wrong url. Anyway, if you want to navigate between iViews
developed in PDK for .NET I would suggest you to read this documentation:
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/go/km/docs/library/dotnet/pdk%20for%20.net/developer's%20Guide%20PDK%202.0%20for%20.NET/index.html">PDK 2.0 for .NET Development Guide</a>:
1. Tutorials -> Tutorial 8: Implementing Object-Based Navigation
2. Tutorials -> Tutorial 7:Client-Side Events and How to -> Portal Client-Side Events
3. How to -> Portal Server-Side Events
and in <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/developerareas/dotnet?rid=/lw/uuid/95628888-0d01-0010-7d97-f0d771999d0f">pdk 2.5 for .NET Development Guide</a>:
1. How to -> Using the TabStrip Control ( TabStrip is available in PDK 2.0 too, but without the documentation ).
Regards,
Rima.

5th generation ipod not detected by my windows xp. works fine on other pc. performed necessary steps to remove and reinstall itunes but having same issue. is there a driver i can download to pc then direct to that specific location when installing?

5th generation ipod not detected by my windows xp. works fine on other pc. performed necessary steps to remove and reinstall itunes but having same issue. is there a driver i can download to pc then direct to that specific location when installing?

I have a similar issue - my iPod nano connects and is visible in Device Manager yet invisible in My Computer and iTunes. I've tried everything I can possibly think of to try and solve this myself, all in vain.
Mine is a nano 4G. I've been using it for quite some time without the slightest problem. I have been using WINAMP instead of iTunes to manage my darling nano.
Then, one fine day I bought a new computer and the nano would not show up in My Computer, though the nano display shows "Do not disconnect". On my old computer it worked (and still works) absolutely fine with win XP as well as with win7 (the later I currently use on my new/problematic computer, which I bought last summer and that's how long I've had this problem).
Of course, after several first attempts I gave up and installed iTunes. I've tried using the Apple support article "iPod not recognized in 'My Computer' and in iTunes for Windows":
- reset
- fully charged,
- cable works fine on two other computers
- in normal or disk mode makes no difference
- tried to find anything useful in the diagnostics mode
- reinstalled iTunes several different times since then to the latest version
- I've unplugged every other USB device except for my mouse and keyboard and tried several different USB ports on my motherboard (USB 3.0 and conventional), as well as trying different USB- related options in my BIOS.
- I've never used any Mac with this ipod
- I've tried fiddling with the win7 Services by stopping and restarting them and of course
- uninstalling the iPod drivers in Device Manager. After such an uninstall the ipod would automatically be recognised and "ready for use", i.e. being invisible in My Computer.
- Attempted to find any possible third-party conflict with msconfig or the possibility that my ipod is being confused for a network drive (for which I've disconnected my HDD, leaving only my SSD with the OS).
Sometimes, iTunes would note that iPod service (or something, can't remember exactly) failed to install properly and asked to try and repair it. I would click YES! and voila - no change! The ipod would rarely show up in iTunes on my problematic computer like this:
iTunes would warn me that the nano would need restoring so I would try and do it on my haunted machine upon which iTunes would freeze like you seen in the picture.
Despite this, I've updated and restored the nano on my father's computer to the latest version without any problems. This though, did not solve my problem in any way.
I can load music to my nano through my old computer (which for me is a real pain and hassle) and the gadget works normally in terms of its disconnected functionality.
I've taken my nano to the local service for repair and they said it was fine. Mercifully, they didn't charge for the diagnostics service (gee, thanks for not ripping me off!).
Here are two screengrabs from my Device Manager
and Devices and Printers screens on my comp:
That is my sad story as far as I can remember. It's most likely something with the drivers or something along those lines though I'm out of ideas at this point.
If you think you have any idea PLEASR HELP, I'M DESPERATE!

Having same issue as dtwaldo1 - but using a PC running windows 8.1 (sorry). Cay you please help? John

Having same issue as dtwaldo1 - utility recognizes unit but when I try to install get error message and try again, Have tried all combinations I can conceive but still get message. My old airport operates OK on same system - but utility does not recognize old model airports. I'm using a PC running windows 8.1 (sorry). Cay you please help?
John

Hi,
If you trying connect two Universal apps through Bluetooth, can you check if the
Windows 8.1 Bluetooth RFComm sample runs fine on both the devices? I successfully tested the Windows 8.1 Bluetooth RFComm sample on Laptop (Windows 8.1) and Windows Phone 8.1 (paired).
Make sure the service which you are trying to advertise/listen is supported by both the devices.
-Sagar

I just updated to 8.3 and now i cant add events to my calendar an the red icon saying howmany new texts I have does not work. Anyone having same issue?

Anyone having same issue. It is annoying not knowing when I have a new text

Upgrade to Snow Leopard - it's compatible with the latest version of iTunes, and still supports PowerPC applications.
$19.99 - http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Snow Leopard is required if you wanted to upgrade to Lion, anyway, which you may want to in the future if the latest version of iTunes no longer supports Snow Leopard.

When installing Server 2008 Datacenter from disc, I get the error message "Windows could not parse or process the unattent answer file for pass [specialize].

This is a clean install from s disc onto a 3TB GPT drive. This is for testing. I'm not concerned with finding a more practical solution for this installation.
There is no image or answer file involved. But at the "Completing Installation" phase, I receive this error message about an answer file.
Has anyone else expecrienced this problem? The only results I find here are regarding actual imaging with answer files.
EDIT: [Redacted]
EDIT 2: Since this now happens with every single installation of Server 2008 on this system, I feel the need to keep this open and elaborate on my situation.
I originally installed Server 2008 on the 2TB partition of this 3TB drive. The partition type was MBR. I reinstalled it (there was a false alarm for malicious software) since it was a fresh install without updates or anything else installed. And for the
second time, it installed fine.
I decided to make the most of my 3TB drive and try GPT partitioning. So I went into the command prompt > diskpart > ran "clean" on the disk, then "convert GPT"
That is when I tried another install of Server 2008 and received this error message about an answer file.
I decided to convert it back to MBR and get on with what I wanted to test in the first place. So I went into Diskpart again, ran "clean", rand "convert MBR" and started the install. But this resulted in the same error message about an
answer file.
I went back to Diskpart, "clean"ed the disk, ran "convert dynamic" to make sure it was dynamic, then tried the install again, with the same result.
Now, I've tried installing on the disk as GPT, MBR basic and MBR dynamic. I've tried a different installation disc, as well. I got the same result. At this point, I'm going to switch hard drives, but I'm still open to input. Thanks for reading!

Hi,
As you swapped the hard disk, whether the same issue occurs again if you redo the same steps?
I asked "OEM or retail" because of this known issue:
"Windows could not parse or process the unattend answer file for pass [specialize]" error message when you perform an in-place upgrade in Windows 7 or in Windows Server 2008 R2
http://support.microsoft.com/kb/2425962
An answer file may already contain in the disc which causes the issue.
If issue still exists you can click Shift + F10 during the installation process to see the log. Check if the installation error for detailed information.
If you have any feedback on our support, please send to [email protected]

HT4623 I can no longer send photos from my Iphone 4G. Also not receiving any photos sent by family members. I did the reset of the entire phone & restored from Icloud backup still having same issue.

I can no longer send pictures from my I phone 4Gs, It's been updated & I reset the entire phone & restored. Still having same issues. Also not receiving pictures anymore either.

Ah yes school boy error there out of frustration and discontent..
My issue is with music/apps/films etc not downloading from iTunes / App Store.
They initially fail and message is displayed stating unable to download / purchase at this time, yet if I retry it says I've already purchased (?) or alternatively I go to the purchased section and there they are waiting with the cloud symbol..
However some items get frozen in the download window and cannot be retried or deleted. Message appears stating to tap to retry, but even if you stole every bath and sink in the uk you'd still not have enough taps.
I post here as the iTunes guys are useless in there 'help' and have only advised posting here or phoning apple, at my expense, to explain a problem that could be rectified by forwarding my original email to a techie. However the tech team apparently don't have an email address as they're from ye olde Middle Ages..!
Anyways I digress.
So I tried sync to pc, but instead of showing the file as ready to listen/use/view, the iCloud symbol shows and I'm back to square one as the item is unable to download..
At frustration station waiting for a train from pain...
All my software is up to date, and had all worked fine prior to the last big iOS update that resulted in all the changes in display and dismay.
Answers in a postcard :-)
Much love

Please Help! I have a subscription/replication issue with the error - Replication-Replication Distribution Subsystem: agent (null) failed. The publication 'blah' does not exist.

I keep getting this error and my subscription table isn't populating:
The publication 'publish_playerSession_off_serverABC' does not exist.
Other setup items:
1) Both servers are on the same domain Windows Server 2008 running SQL Server 2008 and the SQL agent is running under a network account.
2) I have the publication destination on a shared network drive & the network account mentioned above has access to this drive.
Thanks in Advance! Carl
Carl

Thanks Tracy - I was able to delete the subscription on the publication server and was able to recreate most of the subscription on the subscription server but so far have been unable to start the subscription agent.
I ran the command exec sp_link_publication yesterday and received the error: "The Microsoft Distributed Transaction Coordinator (MS DTC) service could not be contacted. If you would like distributed transaction functionality, please start this service."
WTF? Anyhow - Googled this issue for awhile and was advised to run a command with a utility called subinacl.exe but the command failed stating that access is denied even though i'm an admin on my computer & I ran the command promp with elevated privileges.
I also downloaded a tool called DTCping.exe and was able to dtcping each server when the utility was running on the publication & subscription servers after tweaking some registry settings on the subscription server & restarting.
Well now i'm still stuck because the subscription agent is failing to start stating (this is the last error in the job that kicks off the agent):
Agent message code 21056. The subscription to publication 'publish_igt_period_data' has expired or does not exist.
Whew! Well i have other priorities this morning but will update this thread if I make any progress on this issue later...
Carl

Getting "Windows could not parse or process the unattend answer file for pass [specialize]" with IE10 integration? Read this...

Hey guys,
I just discovered an issue with using MDT to integrate Internet Explorer 10 into Windows 7 & 2008 R2 image files. Building the images was no problem at all, but when I tried to deploy them it would bomb with this error every time:
"Windows could not parse or process the unattend answer file for pass [specialize]."
So a very annoying and cryptic error to say the least. Obviously the issue was with the unattend.xml file that gets auto-generated by MDT, but all the items under "specialize" had worked just fine when I built the image and the IE version
was the only item that had changed. After comparing the Windows 7 & Server 2008 R2 unattend.xml files to my Windows 8 & Server 2012 unattend.xml files (because they have IE 10 native) I discovered that the following flag was missing
from the Windows 8 & Server 2012 unattend.xml files:
<IEWelcomeMsg>false</IEWelcomeMsg>
So I simply commented it out like so:
Re-ran my test deployment and viola, 100% successful with zero errors. I was a little embarrassed/annoyed that this took me so long to track down, then I realized others might be struggling with this too so thought I'd share.
Hope my time spent saves someone else some grief!

I know the last reply was from a couple weeks ago, but honestly, I haven't been able to find anything else in the last week of searching Google. I'm new to the MDT process but I'm having the same issue with what you posted. I can shift-F10 during the "Applying
system settings" and open my unattend.xml file and remove the IEWelcomeMsg line and the image deploys perfectly, so I know that's my problem. I can't figure out where that line is coming from. I have edited every unattend.xml file in the Templates folder under
MDT and also the one in my deployment task sequence, but somewhere during that deployment, that one setting gets added back to the unattend file and nukes the whole image. I'm about to pull my hair out. I'm implementing MDT to save time but I feel like the
last couple of weeks trying to get it to work have been a waste. I have thought about backing my reference image back to IE9, but having to deploy IE10 post image seems like it's an unnecessary burden. Any help would be appreciated.
~Adam

Running Mac 10.5.8 Updated to FF 8.0 - keeps crashing whenever FF opens - can not launch safe mode either - looks like many people here are having same issue - solutions all keep saying it ha.... see detail

Running Mac 10.5.8 Updated to FF 8.0 - keeps crashing whenever FF opens - can not launch safe mode either - looks like many people here are having same issue - solutions all keep saying it has something to do with roboform 7.6.2 (which is for windows) or the profile. I have created new profile and updated the mac roboform - still no luck - have sent in MANY crash reports with no response ( one was Crash ID: bp-0eea6eb2-aba3-478a-bfb1-8f00d2111110 ) - anyone else find solution other than roboform or profile, or how do i get back to prior version?

Any suggestions?
My mail is still not functioning and crashes everytime I open it or check archived messages.

The 'c' XUSER key for the DBM user does not exist or could not be identified

Hello members,
I am getting this message 'The 'c' XUSER key for the DBM user does not exist or could not be identified' in SUM preparation phase while upgrading SOLMAN from 7.01 to 7.1
Does anyone has any idea on this. What steps need to be followed for this.
My DB is MaxDB.
Thanks,
Srikanth

Hello,
Figured out the problem. Actually SAP System was moved from actual server to Virtual machine on the server. In this process some of the DB configuration got corrupted. And this activity was done by one of our previous employee.
Since this was a standalone system, I took backup of all current configuration and uninstalled SAP and installed new Solman 7.1 SPS12. Issue is resolved now.
Best Regards,
Srikanth
Solman Upgrade from 7.01 to 7.1 stuck in Extraction-PREP_EXTRACT/BEGIN_PRE phase

[Solved] The requested object does not exist. (Exception from HRESULT: 0x80010114)

I have a 8 node cluster with Hyper-V, which will be 10 nodes when it's finally done.
Recently I've been try to add nodes and though that went fine, after about a week I could not open the Failover Cluster Manager anymore.
After some checking I found out that the latest added node was giving problems.
VM's on the node still run and function properly, but most Powershell commands result in a "The requested object does not exist. (Exception from HRESULT: 0x80010114)".
I can suspend the node with Suspend-ClusterNode, but draining roles was unsuccesful in one case.
In the other there were no VM's on the node so suspending went fine.
What I did find out was that when I tried to ping the node from another, proper functioning node, it took a while before the pinging started. It felt like the interface had to come back online on the problem node.
After that, I could add the cluster to the Failover Cluster Manager. However, Powershell commands still give a 0x80010114 error or a CIM error for when I use Get-NetAdapter.
A reboot resolves the problem, but only for about a week.
I know there is a topic with the same title already, but the wbemtest en rollup update "answer" is totally unclear to me why I should change something with wbemtest, or why to install updates that to me have nothing to do with this problem.
Before I did the ping test from a functioning node I pinged my DC and another node from the problem node just fine.
No waiting at all.
The cluster has three networks. Management (host only), Live Migration and iSCSI (also a VMSwitch for certain VM's).
I have no idea where to look. Evenviewer doesn't give me anything I can work with that I can find...

Hi,
Are you using the HP servers? It seems is the HP Nic team service was causing the issue, please try to
disabled the HP NIC team service from services and restarted the WMI service.
The related third party information:
Advisory: (Revision) HP ProLiant Servers - Systems Running Microsoft Windows Server 2012 or 2012 R2 May Experience a Memory Leak Up To 5 Mb/ Hour for Some NIC Teaming Configurations
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken&javax.portlet.prp_ba847bafb2a2d782fcbb0710b053ce01=wsrp-navigationalState%3DdocId%253Demr_na-c04209163-2%257CdocLocale%253D%257CcalledBy%253D&javax.portlet.tpst=ba847bafb2a2d782fcbb0710b053ce01&ac.admitted=1401176219136.876444892.199480143
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Windows 8.1 having same issue: Windows could not parse or process unattend answer file (C:\Windows\Panther\unattend.xml) for pass [specialize]. A component or setting specified in the answer file does not exist.

Similar Messages

Maybe you are looking for